Genuine BMW for BMW 5 Series E61 (2006-2010)

This is the sensor / sending unit that notifies the computer if your coolant level is low. When this fails, it can give a false indication of low coolant -- or worse, not inform you of a low coolant situation which could potential cause overheating. (Note: This sensor is also found in the windshield washer container, to alert the computer when you are low on washer fluid)

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This sensor also serves as the washer fluid level sensor on many models.

This fluid level sensor is found on the following BMWs:
1999-2005 E46 3 Series - 323i, 323Ci, 328i, 328Ci, 325i, 325ix, 325Ci, 330i, 330ix, 330Ci
2001-2006 E46 M3
2000-2003 E39 M5 Coolant Level Sensor only
2006-newer E90/E92 3 Series - 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi M3
2004-2009 E60 5 Series - 525i, 525xi, 528i, 528xi, 530i, 530xi, 545i, 550i, M5
2004-2009 E63/E64 6 Series - 645Ci, 650i, M6
2002-2009 E65/E66 7 Series - 745i, 745Li, 750i, 750Li, 760i, Alpina B7
2004-2009 X3 SAV - X3 2.5i, X3 3.0i, X3 3.0si
2000-2006 E53 X5 X5 3.0i X5 4.4i X5 4.6is X5 4.8is
2007+ E70 X5 X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive48i X5M
2007+ E71 X6 X6 xDrive35i X6 xDrive50i X6M
2003-2009 Z4 Roadster/Coupe - Z4 2.5i, Z4 3.0i, Z4 3.0xi, MZ4 Roadster & Coupe
2000-2003 E52 Z8 Z8 Roadster - Coolant Level Sensor only
 

Not only will this kit stop most E90 oil leaks, it's the perfect addition for ignition coil or spark plug replacement! Oil leaks - and the damage they can cause - seem to be the worst annoyances on these cars. The biggest source of an oil leak is from the valve cover, followed by the oil filter housing, Valvetronic seal, camshaft seals, and the eccentric shaft sensor seal. Once the oil leaks, and if ignored for an extended time, the oil will contaminate vital electrical sensors. This is especially the case with ignition coils and also the eccentric shaft sensor on the Valvetronic shaft at the top of the cylinder head. During any ignition coil and spark plug replacement take a close look inside for any oil pooling at the bottom. We have been seeing valve cover oil leaks as soon as 40,000 miles. We look for oil leaks on every E90 that comes into our shop.

We have put together this package of valve cover gaskets and other related gaskets and seals for you to fully overhaul the N52 valve cover and put a stop to those pesky oil leaks. This package has the replacement parts for N52 engines built up to 10/2006 and includes:
 

• 11127581215 - N52 valve cover gasket set
• 11120409288 - N52 aluminum valve cover bolts (1-time use only, not re-usable)
• 11377516302 - N52 Valvetronic gasket
• 11127528242 - N52 eccentric shaft sensor seal

These are all Genuien BMW parts. Replacement of these gaskets and seals is straight-forward but a long process. BMW dealers typically charge for over eight hours of labor. If you have replaced spark plugs before you should be capable of this repair. In addition, there are several other parts to replace while you're in the vicinity: camshaft sensor o-rings, oil filter housing profile gasket, VAN0S solenoids, and the eccentric shaft sensor. These other parts, except the eccentric shaft sensor (see below), are replaceable without removing the valve cover but are more easily accessed during the valve cover work.

Eccentric Shaft Sensor: This is the position sensor that relays the eccentric shaft's position back to the DME. It's located at the front of the engine and is only accessible with the valve cover off. Over time the seal around the sensor comes loose and oil is allowed to blow out of the cam cover and it eventually finds its way into the sensor (which will eventually fail). Without a functioning sensor your E90 can experience poor running, hesitation, poor performance, jerky shifts, and sluggish response. It's easy to check and see if oil has accumulated inside the sensor: unbolt the engine trim cover (the outer cover with the BMW roundel), unplug the sensor, and look inside. If oil is present inside or even around the sensor itself, plan on replacing this sensor during your next ignition coil, spark plug, and/or valve cover gasket work.

This valve cover kit fits the following BMWs:
2006 E90 BMW 325i 325xi 330i 330xi - Sedan
2006 E91 BMW 325xi - Wagon
2006 E60 BMW 525i 525xi 530i 530xi
2006-10/2006 E85 BMW Z4 3.0i Z4 3.0si

A  leaking N52 oil filter housing gasket can cause a myriad of problems. The most prominent of which is getting oil on your serpentine belt, causing it to shred, get sucked into the engine, and cause catastrophic engine failure. This kit includes everything you need to replace on the car - gasket and bolts, since the bolts are torque to yield (1 time use).

This kit includes:
1 Oil Filter Housing Gasket (11428637821)
1 M8x28 bolt (11427540759)
1 M8x43 bolt (11427540763)
1 M8x78 bolt (11427540758)

Having done quite a few of these jobs, we recommend this E10 1/4" Drive Swivel socket to help get the job done without removing your intake manifold.

This kit is for all N52 engines.

Genuine BMW Communication Rmfd Telematics Control Unit is a high-quality remanufactured unit designed specifically for BMW vehicles equipped with Bluetooth technology. This telematics control unit ensures seamless communication between your vehicle's systems and external devices, enhancing the overall functionality and convenience of your BMW. With a commitment to quality, this unit is remanufactured to meet or exceed OEM standards, providing reliable performance.

The price includes a refundable core charge of $260.00, making it an economical choice for those looking to upgrade or replace their existing telematics unit.

• Designed specifically for BMW vehicles with Bluetooth capability
• Remanufactured to meet or exceed OEM standards for quality and reliability
• Ensures seamless communication between vehicle systems and external devices
• Economical choice with refundable core charge included
• Enhances overall functionality and convenience of the vehicle

Upgrade your BMW's telematics system with the Genuine BMW Communication Rmfd Telematics Control Unit and enjoy improved connectivity and performance.