• 70MM, 80MM, OR 90MM OVERALL LENGTH
• OUR HIGHEST-GRADE PREMIUM WHEEL STUD
• DRY LUBE WITH BLACK M-PHOSPHATE COATING
• STUD FOR RACE/TRACK USE
• CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
• USE WITH 14x1.5 NUT
  
• For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.
  
  These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.
  
  We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.
   

  FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:
  

• Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
• Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
• Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
• Heat-treated aircraft quality alloy steel
• Developed from over 20 years of top level NASCAR use
  
• These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).
  
  Sold per stud.
  Wheel nuts sold separately.

Upgrade your BMW's wheel bolts with ECS Titanium Wheel Bolts for superior performance and durability. These bolts are 50% lighter than steel bolts, reducing rotational mass and enhancing vehicle agility. CNC'd from annealed titanium alloy, they meet class 10.9 fastener proof load requirements without signs of fatigue or failure. With precise specifications and a conical seat design, they ensure a perfect fit and optimal performance for your BMW.

• 50% lighter than steel bolts, reducing rotational mass
• CNC'd from annealed titanium alloy for durability
• Conical seat design for perfect fitment
• Resistant to rust and corrosion for long-term reliability

Upgrade the wheel hardware of your BMW or MINI with the Titanium Conical Seat Lug Nut Set - Open Ended - 20 Pieces. This set of lug nuts offers a lightweight and high-strength alternative to traditional steel lug nuts, enhancing both performance and aesthetics. Engineered with precision, these lug nuts provide a secure fit and reliable performance. Elevate the look and feel of your BMW or MINI with this premium titanium lug nut set.

• Lightweight and high-strength titanium construction
• Enhances both performance and aesthetics
• Engineered with precision for a secure fit
• Compatible with BMW and MINI models

Upgrade your BMW's wheel setup with ECS Tuning's Extended Wheel Bolts. Available individually or with matched spacers for easy fitment, these bolts meet strict ISO 898 class 10.9 standards for mechanical and physical properties. Lab-tested to ensure compliance, they offer reliable and durable performance. The 14mm diameter, 1.25mm thread pitch, and 43mm length make these bolts ideal for various applications, providing a secure fit for your wheels.

• Extended wheel bolts for BMW
• Available individually or with matched spacers
• Meets ISO 898 class 10.9 standards
• Lab-tested for compliance and reliability
• 14mm diameter, 1.25mm thread pitch, 43mm length
• Ideal for wheel spacer applications

ECS Tuning lab tests its fasteners to ensure they meet all 10.9 specifications.

Wheel Bolt specs:

• Diameter - 14mm
• Thread Pitch - 1.25mm
• Length - 27mm

If installing wheel spacers, measure your current wheel bolt's length and add the width of your spacer to determine correct extended bolt length. 

The engineering team at ECS Tuning have now made it possible to easily bolt on modern day 5x127 (5x5) Jeep wheels (71.5mm CB) onto your BMW. This vastly opens up the options for popular off-road wheel styles to choose from, or you can buy an inexpensive set of OEM Jeep wheels to bolt on to your European car or SUV.

PART DESIGN

In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment

Designed to fit modern day OEM and aftermarket Jeep wheels using 5x127 (5x5) bolt circle and 71.5mm center bore

Precision engineered to fit the OEM BMW 72.56mm & 74.1mm hubs to maintain vibration-free operation

CNC-machined from a solid block of 6061-T6 billet aluminum then black anodized for corrosion protection

Includes pre-installed press-fit M14x1.5mm RH thread wheel studs along with 60° conical seat, open-ended chrome lug nuts for the proper Jeep lug seat

KIT CONTENTS

5x120mm (74.1mm CB) to 5x127mm Wheel Adapters - QTY 4

M14x1.5mm conical seat lug nuts - QTY 20

The engineering team at ECS Tuning have now made it possible to easily bolt on modern day 5x127 (5x5) Jeep wheels (71.5mm CB) onto your BMW. This vastly opens up the options for popular off-road wheel styles to choose from, or you can buy an inexpensive set of OEM Jeep wheels to bolt on to your European car or SUV.

PART DESIGN

In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment

Designed to fit modern day OEM and aftermarket Jeep wheels using 5x127 (5x5) bolt circle and 71.5mm center bore

Precision engineered to fit the OEM BMW 72.56mm & 74.1mm hubs to maintain vibration-free operation

CNC-machined from a solid block of 6061-T6 billet aluminum then black anodized for corrosion protection

Includes pre-installed press-fit M14x1.5mm RH thread wheel studs along with 60° conical seat, open-ended chrome lug nuts for the proper Jeep lug seat

KIT CONTENTS

5x120mm (72.56mm CB) to 5x127mm Wheel Adapters - QTY 2

5x120mm (74.1mm CB) to 5x127mm Wheel Adapters - QTY 2

M14x1.5mm conical seat lug nuts - QTY 20

The engineering team at ECS Tuning have now made it possible to easily bolt on modern day 5x127 (5x5) Jeep wheels (71.5mm CB) onto your BMW. This vastly opens up the options for popular off-road wheel styles to choose from, or you can buy an inexpensive set of OEM Jeep wheels to bolt on to your European car or SUV.

PART DESIGN

In-house designed and engineered using FARO ARM laser scanning technology and SolidWorks 3D CAD modeling for precision fitment

Designed to fit modern day OEM and aftermarket Jeep wheels using 5x127 (5x5) bolt circle and 71.5mm center bore

Precision engineered to fit the OEM BMW 72.56mm & 74.1mm hubs to maintain vibration-free operation

CNC-machined from a solid block of 6061-T6 billet aluminum then black anodized for corrosion protection

Includes pre-installed press-fit M14x1.5mm RH thread wheel studs along with 60° conical seat, open-ended chrome lug nuts for the proper Jeep lug seat

KIT CONTENTS

5x120mm (72.56mm CB) to 5x127mm Wheel Adapters - QTY 2 (Rear)

5x120mm (74.1mm CB) to 5x127mm Wheel Adapters - QTY 2 (Front)

M14x1.5mm conical seat lug nuts - QTY 20

BMW Conical Seat Wheel Bolt - 14x1.25x35mm

Elevate your BMW's performance with the premium BMW Conical Seat Wheel Bolt - 14x1.25x35mm. Engineered with precision and designed for durability, this wheel bolt ensures a secure fit for your BMW vehicle. Enhance safety, stability, and overall driving experience with this high-quality BMW accessory.

• Precision-engineered for BMW vehicles
• Durable construction ensures long-lasting performance
• Secure fit for enhanced safety and stability
• Improves overall performance of the vehicle

Upgrade the wheel hardware of your BMW with the BMW Titanium Conical Seat Wheel Bolt - 14x1.25x45mm - Set Of 20. This comprehensive set of titanium wheel bolts is designed to enhance both the aesthetics and performance of your BMW. Engineered specifically for BMW models, these conical seat wheel bolts offer superior strength and durability compared to traditional steel bolts. Elevate the style and functionality of your BMW with this premium titanium wheel bolt set.

• Enhances the aesthetics and performance of your BMW
• Superior strength and durability compared to traditional steel bolts
• Engineered specifically for BMW models
• Set of 20 bolts ensures complete wheel installation

ECS Tuning proudly presents extended wheel bolts designed for BMW enthusiasts, available individually or with matched spacers for hassle-free fitment. Engineered to meet ISO 898 class 10.9 standards, these wheel bolts undergo rigorous testing, ensuring superior mechanical and physical properties.

• Extended wheel bolts for optimal fitment
• Available individually or with matched spacers
• ISO 898 class 10.9 standard for material properties and strength
• Lab-tested to verify class 10.9 requirements
• Diameter: 14mm, Thread Pitch: 1.25mm, Length: 40mm
• Perfect for BMW owners seeking precision fitment and performance