BMW Engine Parts for BMW X Series E70 (2007-2013)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Paradigm Engineering - Corporate Logo
T#:5269535
Part#: OILCAPNXXS55POL
Back Ordered
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.
Show More Show Less
OMP - Corporate Logo
T#:1614
Part#: EA-462
Back Ordered
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less
Bavarian Autosport - Corporate Logo
T#:639835
Part#: 13537537319
In Stock
Sale - Save 15% $ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.44 USD
Free Shipping on orders $49 and up
Sale - Save 15%
$ 76.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.44 USD
Free Shipping on orders $49 and up
Located at the rear of the high-pressure fuel rail, this pressure sensor relays fuel pressure information to the vehicle's DME/ECS and is a common source of fault codes. From 1974 to 2019, Bavarian Autosport was one of the premier vendors for BMW and MINI auto parts. We are happy to preserve the Bav Auto legacy by continuing to carry their high-quality products into the future. All Bav Auto parts will remain unchanged in design and sourced from the same OEM suppliers to ensure long-lasting reliability. We trust these parts, accessories, and upgrades so confidently that we back every Bavarian Autosport branded component with a 2-year warranty.
Show More Show Less

IRP - Individual Racing Parts - Corporate Logo
T#:5309585
Part#: IRPCBC-55
In Stock
$ 124.99 USD
Free Shipping
$ 124.99 USD
Free Shipping
Prevent your crank bolt from spinning with IRP's N55/S55 engine bolt fixture. As the spinning of the crank bolt has been a known issue for both the N55 and S55 motors, this is a must have to ensure that your engine stays in working condition! Features: Composed of lightweight billet aluminum Includes crank bolt capture and 8 fasteners
Show More Show Less

King - Corporate Logo
T#:25706094
Part#: CR222GPC
In Stock
13% off MSRP $ 128.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD
Free Shipping on orders $49 and up
13% off MSRP
$ 128.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 111.99 USD
Free Shipping on orders $49 and up
King's Racing Line of Performance Engine Bearings are for enthusiasts looking for an upgraded, coated connecting rod bearing to replace their OE bearings with. Constructed of a Silver base, these bearings are coated in a polymer-based coating to create a thermal barrier between your connecting rods and crankshaft. This kit includes a full set of bearing shells!
Show More Show Less
ACL - Corporate Logo
T#:10811990
Part#: ACL6B1584HX
Ships on Oct 15, 2026
$ 258.99 USD
Free Shipping
$ 258.99 USD
Free Shipping
The ACL N54 Race Series High-Performance Rod Bearing Set is an elite enhancement tailored exclusively for BMW N54 engine models. Meticulously engineered for precision and durability, these rod bearings deliver heightened performance and reliability even under intense conditions. Crafted from premium materials and engineered to precise specifications, they ensure exceptional strength and longevity. This makes them the perfect selection for enthusiasts and professional racers striving to maximize the performance and endurance of their N54-powered vehicles.
Show More Show Less

ECS Magnetic Differential Oil Drain Plug - M18x1.5
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:2706140
Part#: 008664LA01
In Stock
Sale - Save 44% $ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 22.99 USD
Free Shipping on orders $49 and up
Sale - Save 44%
$ 40.99

This product was last offered at the strikethrough price on
05-03-2026

$ 22.99 USD
Free Shipping on orders $49 and up
Turn your oil drain plug into an effective metal particle filter! This drain plug has a SUPER strong magnet built into it's tip, trapping iron and steel contaminants and safely removing them from circulation.
Show More Show Less
Timing Component
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:17871158
Part#: 11367583208
In Stock
Sale - Save 20% $ 199.99

This product was last offered at the strikethrough price on
05-03-2026

$ 159.99 USD
Free Shipping on orders $49 and up
Sale - Save 20%
$ 199.99

This product was last offered at the strikethrough price on
05-03-2026

$ 159.99 USD
Free Shipping on orders $49 and up

Goldenwrench Supply Co - Corporate Logo
T#:6635763
Part#: FXXFCC-B
In Stock
$ 47.00 USD
Free Shipping on orders $49 and up
$ 47.00 USD
Free Shipping on orders $49 and up
Give your gas cap a much-needed upgrade with the all new BMW M Car Series Billet Aluminum Fuel Cap Cover from Goldenwrench Supply Co. This performance Fuel Cap Cover Kit comes with a Billet Aluminum Fuel Cap Cover, and Installation Instructions. Please note this a cover that affixes on top of your factory fuel cap installing easily in minutes.
Show More Show Less

ARP - Corporate Logo
T#:42335661
Part#: ARP-HSK-N55-S
In Stock
$ 742.99 USD
Free Shipping on orders $49 and up
Enhance your BMW N55 engine's ability to handle higher levels of boost with 5150's custom-designed Head Stud Kit from ARP, the global leader in fastener technology!
MMX Performance - Corporate Logo
T#:32980553
Part#: MMR03-0506
In Stock
$ 37.99 USD
Free Shipping on orders $49 and up
There's no avoiding it, your engine's contact surfaces wear a tiny amount each time it runs. So, it becomes inevitable that tiny ferrous particles become suspended in the oil. They quickly make their way around your engine via the oil system for thousands of miles traveling over sensitive components such as your crankshaft bearings or camshaft caps, slowly contributing to increased engine wear. Our magnetic sump plug has a large surface area magnetic end, which helps to catch metal particles. And of course, the harder your engine works, the greater the risk of this nasty metallic debris, meaning the greater the benefit of using our magnetic sump plug. The MMX Performance magnetic sump plug is crafted from T6-6061 lightweight aluminum and is anodized in our trademark gloss black finish. It's supplied with a set of 5 sealing washers included (additional packs of washers can be ordered). Insist on an MMX magnetic sump plug at your next service! Full OE plug replacement. M18 x 1.5 fitment. Protect and increase engine lifespan. Crafted from T6-6061 lightweight aluminum. Anodized in our trademark gloss black finish. Supplied with a set of 5 sealing washers.
Show More Show Less
AUTOTECKNIC - Corporate Logo
T#:39971047
Part#: BM-0007
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
a precision-engineered, lightweight dry carbon fiber upgrade designed to enhance the engine bay of compatible BMW models with an aggressive motorsport look and easy OEM-style installation.


MMX Performance - Corporate Logo
T#:19891361
Part#: MMR20-1004
Ships in 3 Business Days
$ 1,064.99 USD
Free Shipping
$ 1,064.99 USD
Free Shipping
Both the N55 and S55 engines are plagued by the same issue when chasing high horsepower numbers... the dreaded crankhub failure. Fortunately MMR Performance has released an upgraded version of their already stout single-piece crankhub, but this time offering a 4-pin dowelled location that locks onto the front of the crankshaft. This configuration eliminates the multi-piece crankhub with friction discs in favor of a more robust single piece crankhub. Recommended for high-powered cars over 700 Horsepower
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:18733531
Part#: VTT-CRANKHUB-5
Ships on Oct 14, 2026
$ 880.99 USD
Free Shipping
$ 880.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
MANLEY - Corporate Logo
T#:17073607
Part#: 647005C-6
In Stock
8% off MSRP $ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up

BMW N55 S55 37cc Platinum Series Dish Piston Set - 84.5mm Bore is designed for high-performance applications, providing exceptional strength and durability for BMW engines. Turner Motorsport offers this premium piston set to enhance engine reliability and efficiency.

  • High-Strength Material: Crafted from 2618 high-strength material for superior durability and performance.
  • Quiet Start-Ups: Offset wrist pin design minimizes noise during engine start-ups.
  • Premium Pins: Includes a .210” wall Premium Chrome Moly pin (Standard Series) or a .210” wall 9310 alloy pin (Extreme Duty Series) for added strength.
  • Pressure Balance Groove: Features a pressure balance groove to improve piston stability and efficiency.
  • Valve Accommodation: Designed to accommodate +1mm valve sizes for enhanced engine performance.
  • Top-Quality Rings: Comes with premium steel top rings, Napier seconds, and round wire locks for optimal sealing and reliability.
  • Recommended Clearance: Piston clearance of .0035” measured .850” from the bottom of the oil ring for precise fitment.
Show More Show Less

Paradigm Engineering - Corporate Logo
T#:5269537
Part#: OILCAPNXXS55RED
Ships in 5 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Paradigm Engineering’s magnetic oil filter cap augments your vehicle's oil filtration system and serves as a diagnostic tool. Each oil filter cap is CNC milled from a solid block of billet aluminum and fitted with a Samarium-Cobalt rare earth magnet. This magnet is in direct contact with pre-filtered oil, as a result, the magnet will naturally capture Ferrous particles within your engine oil. Ferrous particles in engine oil cause premature wear, obstruct the paper oil filter, and could be an indication of a serious issue within your engine.
Show More Show Less

King - Corporate Logo
T#:25706102
Part#: CR222GPC026
Ships in 1-2 days
$ 101.99 USD
Free Shipping on orders $49 and up
$ 101.99 USD
Free Shipping on orders $49 and up
King's Racing Line of Performance Engine Bearings are for enthusiasts looking for an upgraded, coated connecting rod bearing to replace their OE bearings with. Constructed of a Silver base, these bearings are coated in a polymer-based coating to create a thermal barrier between your connecting rods and crankshaft. Set of 4 Bearing Shells - .026 Oversize
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38161679
Part#: 201-0410
In Stock
$ 49.00 USD
Free Shipping on orders $49 and up
Ideal for enthusiasts looking to optimize their vehicle’s fuel system, this ethanol sensor harness delivers precision and reliability for high-performance applications.

Burger Motorsports - Corporate Logo
T#:27171935
Part#: IRTHERM
Back Ordered
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Starting at $ 318.99 USD
Free Shipping on orders $49 and up
Precise Oil Temperature Control for Your BMW Upgrade your BMW N20, N26, N51, N52, N53, N54, N55, and S55 engine's oil temperature control with Improved Racing's high-performance oil cooler adapter. Designed to address flaws in the factory's restrictive oil cooler adapter and faulty internal flow control valve, this upgrade ensures precise oil temperature control. Improved Racing's thermostat provides quick engine warmup, prevents overcooling, and delivers full oil cooling capacity on demand. Trusted by professional race teams around the globe, Improved Racing's thermostats have proven highly reliable, are backed by a lifetime warranty, and are made in the USA. Option to Use the Factory Oil Cooler and Lines The optional factory oil line adapter allows you to use the factory oil cooler lines for a simple, plug-and-play installation. For maximum performance, the factory oil cooler and lines may be replaced with an aftermarket cooler and AN lines using the AN adapter fittings (-10AN line size is recommended). ​Please note that some applications, such as most BMW SUV's, use a water-to-oil heat exchangers. These applications require plugging the coolant supply and return ports, as well as adding an external air-to-oil cooler and lines (factory or aftermarket). Please note the Oil cooler adapter cannot be used without an oil cooler.
Show More Show Less
Walbro - Corporate Logo
T#:23020149
Part#: F90000295
In Stock at Vendor
$ 203.99 USD
Free Shipping on orders $49 and up

New DCSS 39/50 High-Performance Pump – F90000295

  • Highest flow in-tank brushed fuel pump offering from TI Automotive / Walbro
  • No Internal check valve - ideal for racing applications to build oil pressure prior to start-up
  • Featuring award-winning DCSS technology
  • E85 compatible
  • High-pressure relief setting - supports supercharger and turbo applications
  • Capable of supporting 900+HP at 60PSI naturally aspirated applications
  • Complete Pump and kit combination – TCD495

Fuel: GAS & E85

Horsepower: 900+ at 60PSI, naturally aspirated applications

Over All Pump Length: 131mm

Main Housing Diameter: 39mm

Lower Housing Diameter: 50mm

Fuel Inlet Diameter: 11mm OD

Fuel Outlet Diameter: 11mm OD

Flow Rate: 535LPH at 40psi

Test Voltage: 13.5 Volts

Show More Show Less

Arc Terminator - Corporate Logo
T#:28304530
Part#: EKP-HW05-E-NF
In Stock
$ 229.99 USD
Free Shipping on orders $49 and up
Arc Terminator now offers upgraded EKMP3 Fuel Pump Control Modules featuring a 22 Amp INCREASE in maximum current capacity over an OEM EKPM3. This allows for more current to be supplied to your low-pressure fuel pump (LPFP) without risking thermal overload, which often leads to your car shutting down. This means that you won't have to worry about being stranded on the side of the road while waiting for your EKP module to cool down, especially when you've installed a large low-pressure fuel pump such as a Walbro 525lph. Includes 40mm Noctua Silent Fan! How does the integrated automatic cooling work? The integrated automatic cooling works by us installing a thermal activation switch directly onto the new half bridge IC. When the half bridge IC reaches 50°C, the 40mm fan will turn on and keep running until the IC is below 50°C or until the EKMP3 stops receiving power. I have an EKPM2, can I upgrade to this? Yes. You can upgrade to this. We recommend using the HW05 and below module. You will need to code it in order for it to function properly. Can I run more than 1 low-pressure fuel pump off of this module? No. We do not recommend that you use more than one low-pressure fuel pump with any EKP module due to the factory wiring supplying power to the EKP Module is only 12 gauge, which is not rated for the type of power demands that two low-pressure fuel pumps would require.
Show More Show Less

King - Corporate Logo
T#:26504938
Part#: MB5801SM0.25
In Stock at Vendor
22% off MSRP $ 326.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 255.99 USD
Free Shipping on orders $49 and up
22% off MSRP
$ 326.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 255.99 USD
Free Shipping on orders $49 and up
Introducing King Main Bearings for BMW Engines: the ultimate solution for enhancing your engine's performance. Crafted with precision and expertise, King's bearings offer unmatched durability and reliability. Designed to meet the demands of high-performance driving, they provide the stability and support your engine needs. Elevate your BMW driving experience with King Bearings. Complete Set: King Main Bearings for BMW Engines come as a full set. Silicon-aluminum Bi-Metal Construction: Crafted from King's premium Silicon-aluminum bi-metal material offering exceptional strength, durability, and heat resistance. Precision Engineering: Engineered with meticulous attention to detail, our bearings are designed to exacting standards to ensure optimal fitment and compatibility with BMW engines. Enhanced Performance: Experience improved engine stability and smoother operation with King Bearings.
Show More Show Less
BMW N52 3.0L Performance Ignition Service Kit
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Call In, Chat, Or Email, For Best Price! Limited Time Only!
Dinan - Corporate Logo
T#:14585048
Part#: D650-0002KT7
In Stock
Sale - Save 10% $ 264.99

This product was last offered at the strikethrough price on
09-29-2026

$ 238.35 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 264.99

This product was last offered at the strikethrough price on
09-29-2026

$ 238.35 USD
Free Shipping on orders $49 and up

BMW N52 3.0L Performance Ignition Service Kit

is the ultimate solution for enhancing the ignition system of your BMW. This comprehensive kit includes everything necessary for a complete ignition service upgrade, featuring high-performance black Dinan ignition coils designed to deliver optimal spark and efficiency. Perfect for both everyday driving and spirited performance, this ignition service kit ensures your engine runs smoothly and efficiently. By upgrading to the BMW N52 3.0L Performance Ignition Service Kit, BMW owners can experience improved throttle response, enhanced fuel efficiency, and increased horsepower. Turner Motorsport provides quality components that guarantee reliability and performance, making this kit an essential upgrade for any N52 engine.

Key Benefits:

  • Complete Upgrade: Includes all necessary components for a full ignition service.
  • High-Performance Ignition Coils: Features black Dinan ignition coils for maximum spark efficiency.
  • Enhanced Performance: Improves throttle response and increases horsepower.
  • Improved Fuel Efficiency: Optimizes fuel combustion for better mileage.
  • Quality Assurance: Components from Turner Motorsport ensure reliability and longevity.
Show More Show Less
Mishimoto - Corporate Logo
T#:372557
Part#: MMOCCCF
In Stock
$ 162.99 USD
Free Shipping
$ 162.99 USD
Free Shipping
Universal kit with a catch can and rubber hose; for retrofitting on a variety of vehicles. Carbon fiber catch can prevents a harmful buildup of oil inside of the turbocharger, intake manifold, intercooler and piping. Separates oil particles from PCV/CCV air Defends intercooler, intake system, and essential components from oil blow-by Made from lightweight carbon fiber Compact design makes for easy engine bay placement Checking fluid levels made easy with built in sight tube Comes complete with mounting bracket, hose, all necessary clamps, fittings, and mounting hardware Mishimoto Lifetime Warranty WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less


Walnut Shell Blast Media (18/40 Fine Grade) - 50 lbs
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:582690
Part#: B1100050
In Stock
$ 93.99 USD
$ 93.99 USD
Used for carbon buildup removal during walnut shell blasting
DeatschWerks Performance Fuel Injector Set - 50lb/hr(550cc)
For Custom Applications - Will require additional tuning or modifications. NOT DIRECT DROP IN!
DeatschWerks - Corporate Logo
T#:6151339
Part#: 16U-00-0050-6
In Stock
$ 403.99

This product was last offered at the strikethrough price on
06-03-2026

$ 369.99 USD
Limited Qty Sale
Free Shipping
$ 403.99

This product was last offered at the strikethrough price on
06-03-2026

$ 369.99 USD
Limited Qty Sale
Free Shipping
DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. All DeatschWerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Full set of 6 50lb/hr 550cc injectors. All relevant tuning data available on DeatschWerks website.
Show More Show Less

1/2-inch Drive VANOS Flush-Cut 17mm & 18mm Sockets
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:398953
Part#: 012016ECS0KTKT
In Stock
Sale - Save 3% $ 67.99

This product was last offered at the strikethrough price on
06-14-2026

$ 65.94 USD
Free Shipping on orders $49 and up
Sale - Save 3%
$ 67.99

This product was last offered at the strikethrough price on
06-14-2026

$ 65.94 USD
Free Shipping on orders $49 and up

Dinan Ignition Service Kit
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:8294106
Part#: D650-0004KT7
In Stock
Sale - Save 10% $ 354.99

This product was last offered at the strikethrough price on
09-29-2026

$ 318.97 USD
Free Shipping
Sale - Save 10%
$ 354.99

This product was last offered at the strikethrough price on
09-29-2026

$ 318.97 USD
Free Shipping
Restore your ignition system using blue Dinan performance ignition coils and NGK spark plugs If your BMW's mileage is getting up there, be sure to keep your ignition system in check. Whether you currently have a misfire or you're just doing preventative maintenance, this kit is perfect. The kit includes: 8 Blue Dinan Coils with locks 8 Bosch spark plugs 1 packet of American Grease Stick dielectric grease Dinan ignition coils features: Up to 10% more energy output than stock. Blue housing with Dinan Logo. True upgrade, not just aesthetic. Direct plug-and-play.
Show More Show Less
1/2-inch Drive 18mm VANOS Flush-Cut Socket
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:394202
Part#: 012016ECS03A
In Stock
Sale - Save 16% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.08 USD
Free Shipping on orders $49 and up
Sale - Save 16%
$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 32.08 USD
Free Shipping on orders $49 and up

Braille - Corporate Logo
T#:558046
Part#: G30
Ships in 7 Business Days
$ 522.99 USD
Free Shipping on orders $49 and up
The G30 lithium battery from Braille is designed for the Import Tuner market (4 and 6 cylinder) for track use and has enough power for small black V8 race cars and hot rods with light electrical demands/accessories and standard compression. The G30 comes in the popular ETX 30 Group size, just like the B3121 AGM, so it is small and light enough to mount in a variety of locations. Incorporated in this battery is the same technology used in their race winning batteries used by nearly every OEM developer in classes ranging from SCCA to Formula 1.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122266
Part#: VTTFILTERCAPCLR
Ships in 2 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less

MMX Performance - Corporate Logo
T#:4565824
Part#: MMR20-1003FK
Ships in 3 Business Days
$ 849.99 USD
Free Shipping
$ 849.99 USD
Free Shipping
Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.
Show More Show Less

Garrett - Corporate Logo
T#:396932
Part#: 11657646092
Ships in 3 Business Days
$ 1,307.99 USD
Free Shipping
$ 1,307.99 USD
Free Shipping
Upgrade Your BMW with Garrett Turbochargers

Garrett offers a comprehensive range of turbochargers suitable for various diesel and gasoline light vehicle engines, covering power units from 0.6 liters to 6.7 liters and everything in between. For heavy vehicles and off-highway equipment, Garrett's product lineup caters to engines with power ratings from 60hp to a formidable 4000hp. With Garrett's advanced technologies and innovations, major global automakers have integrated their products into nearly 100 million vehicles. The company continually launches approximately 100 new applications every year, spanning gas, diesel, natural gas, electric, and fuel cell powertrains.

Signs of a failing turbocharger include abnormal oil consumption, smoking, increased turbo lag, failure to maintain boost, or the vehicle entering "limp mode." To revive your BMW's performance, it's essential to replace any malfunctioning turbocharger.

Show More Show Less
MANLEY - Corporate Logo
T#:17073609
Part#: 647000C-6
In Stock at Vendor
7% off MSRP $ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,121.99 USD
Free Shipping on orders $49 and up
7% off MSRP
$ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,121.99 USD
Free Shipping on orders $49 and up

Upgrade the performance of your BMW N55/S55 3.0L engine with the Turner Motorsport Manley 37cc Platinum Series Dish Piston Set. Crafted from high-strength 2618 material, these pistons offer exceptional durability and reliability. The offset wrist pin design ensures quiet start-ups, while the inclusion of both Premium Chrome Moly and 9310 alloy .210” wall pins caters to varying needs. The pressure balance groove, compatibility with +1mm valve sizes, and premium steel top rings with Napier seconds and round wire locks make these pistons a top-notch choice. With a recommended piston clearance of .0035”, measured .850” from the bottom of the oil ring, these pistons guarantee optimal performance for your BMW engine.

  • Manley 37cc Platinum Series Dish Piston Set for BMW N55/S55 3.0L engine.
  • High-strength 2618 material for exceptional durability.
  • Offset wrist pin for quiet start-ups.
  • Includes both Premium Chrome Moly and 9310 alloy .210” wall pins.
  • Pressure balance groove for enhanced performance.
  • Accommodates +1mm valve sizes for customization.
  • Premium steel top rings with Napier seconds and round wire locks included.
  • Recommended piston clearance of .0035” ensures optimal engine function.

Enhance your BMW's engine with the Turner Motorsport Manley 37cc Platinum Series Dish Piston Set, delivering reliability and performance.

Show More Show Less
Radium Engineering - Corporate Logo
T#:27905095
Part#: 20-0024
In Stock at Vendor
$ 28.99 USD
Free Shipping on orders $49 and up

Includes:

Anodized 4AN ORB Barbed Adapter Fitting, Black Ball Valve with 1/4" Barbs, 125psi @ 140F 4 feet of Radium 1/4" PCV Hose



5150 Autosport - Corporate Logo
T#:23416526
Part#: FER-HPVSK-N55
Ships in 4 Business Days
$ 1,049.99 USD
Free Shipping on orders $49 and up
Maximize your N55 or S55 engine's performance with Ferrea Valve Springs and Retainers, precision components crafted from chromoly alloy. These springs undergo special thermal treatment, ensuring exceptional durability even in extreme racing conditions. Addressing issues like valve binding, breakage, and float, Ferrea valve springs are meticulously heat-treated and stress-relieved, providing stability for high-lift and high-RPM racing engines while minimizing load loss. Precision CNC machined titanium retainers offer superior strength and stability. Ferrea's Spring Seat Locators, made from 4140 chromoly alloy, guarantee precise tolerances and a flat, parallel spring pad with a hard Nitride surface treatment for exceptional toughness and anti-wear characteristics. Please note that installation requires the expertise of an engine builder.
Show More Show Less
Braille - Corporate Logo
T#:36947237
Part#: B48-H6-L3
Ships in 5 Business Days
$ 398.99 USD
$ 398.99 USD
Vargas Turbo Technologies - Corporate Logo
T#:5122267
Part#: VTTFILTERCAPBLUE
Ships on Oct 14, 2026
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38094305
Part#: 601-0260
Back Ordered
$ 64.99 USD
Free Shipping on orders $49 and up
For enthusiasts seeking to regulate fuel pressure at the engine without the complexities of manual adjustments or the need for a 1:1 boost reference, a preset fuel pressure regulator offers an ideal solution. These compact regulators are designed for straightforward installation and consistent performance.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38161702
Part#: 101-0256
Ships in 10 Business Days
$ 49.99 USD
Free Shipping on orders $49 and up

Replacement Fuel Filter Element - 10 Micron | Precision Raceworks offers excellent filtration for BMW and high-performance fuel systems, ensuring that larger particles and contaminants are filtered out to maintain optimal engine function. This 10-micron replacement filter element is designed to work seamlessly with Precision Raceworks inline fuel filters, delivering superior protection to your fuel system components, including injectors and fuel pumps.

Whether you're racing on the track or using your vehicle for daily driving, this replacement fuel filter element keeps your fuel system performing at its best by providing reliable filtration and smooth fuel delivery.

  • 10-micron filtration – Effectively captures larger particles and contaminants to protect fuel system components
  • Maintains fuel flow – Supports smooth fuel delivery for consistent engine performance
  • Durable construction – Crafted with high-quality materials for long-lasting use under various conditions
  • Seamless integration – Direct replacement for Precision Raceworks inline fuel filters
  • Versatile use – Perfect for daily driving, street, and high-performance applications
  • Easy to replace – Simple maintenance to keep your fuel system clean and efficient

Fuel Filter Replacement Guidelines:

  • Racing applications: Inspect at least twice per season and replace as necessary
  • Daily driving: Inspect annually or every 6,000 miles, and replace as needed

Ensure your BMW’s fuel system stays in top shape with the Replacement Fuel Filter Element - 10 Micron | Precision Raceworks, designed to deliver consistent fuel flow and protect your high-performance engine.

Show More Show Less
Spool Performance - Corporate Logo
T#:9642131
Part#: SP-54HX-1-N55
Special Order: No Guaranteed ETA
$ 849.00 USD
Free Shipping
$ 849.00 USD
Free Shipping
Spool Performance is a top name in the BMW Forced Induction industry. Their team of young and intelligent engineers pair their passion for the industry with a rich education background, which results in a high-quality enthusiast-minded products. Spool Performance's state-of-the-art upgrades for your BMW fueling systems are a surefire way to make more power, reliably. The Helix from Spool is simply a planetary gearbox for your High-pressure fuel pump. The particular configuration of the gears and their spatial fixturing allows an axial increase in shaft speed from the input to the output of the unit. The early N55 high-pressure pump is a very capable and over-engineered piece of hardware. As we start tuning and pushing more power, we start seeing drops in the high pressure. What is happening here is that the high-pressure pump is not able pump as much fuel as the injectors are injecting into the cylinders and hence causing the rail pressures to drop. The pump at this point is running out of displacement volume. With a rotary pump like the continental HPFP, an easier way to increase displacement is to spin the pump faster which results in an increased number of delivery strokes per cycle. The Helix helps you do exactly this and thus helps overcome a big limitation in early N55 fuel systems without the complexity of a secondary port injection system.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38094309
Part#: 201-0274
Ships in 6 Business Days
$ 24.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks AN6 Male Flare/ORB to 5/16" (7.89mm) Female Quick Connect is a premium component designed for fluid or fuel systems. The AN6 male flare/ORB fitting ensures a secure connection, while the 5/16" (7.89mm) female quick-connect fitting allows for fast, tool-free disconnection and reconnection. This setup guarantees a reliable, leak-proof seal, ideal for high-performance systems. Would you like assistance sourcing this fitting or other Precision Raceworks components?
Show More Show Less
FTP Motorsport - Corporate Logo
T#:582222
Part#: SG84006
Ships in 10 Business Days
$ 54.00 USD
Free Shipping on orders $49 and up
$ 54.00 USD
Free Shipping on orders $49 and up
This thermostat will open sooner and help to lower the overall oil temperature.

Burger Motorsports - Corporate Logo
T#:583132
Part#: BMSBSPGT14MM
Ships on Oct 14, 2026
$ 35.00 USD
Free Shipping on orders $49 and up

BMS Billet Spark Plug Gapper Tool - 14mm is an essential tool for achieving accurate and consistent spark plug gapping, ideal for automotive enthusiasts and professional mechanics alike. This precision tool helps maintain optimal plug performance by providing reliable, consistent gaps. Available in both 14mm and 12mm plug thread sizes, this tool is proudly made in the USA to deliver durability and precision.

  • Precisely gaps spark plugs for enhanced engine performance and efficiency
  • Speeds up the gapping process while ensuring accuracy and uniformity
  • Available in two sizes (14mm and 12mm) for a wider range of compatibility
  • Optional specialty feeler gauge included with 4 blades in thicknesses of .018, .020, .022, and .024
  • Made in the USA for premium quality and durability
Show More Show Less

ATI Performance Products - Corporate Logo
T#:639879
Part#: VAC-HPCD-N54
Ships in 9 Business Days
$ 1,059.99 USD
Free Shipping
$ 1,059.99 USD
Free Shipping
If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3, E9X and E6X, as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Includes lightweight VAC Billet Crankshaft Pulley.
Show More Show Less
Canton Racing - Corporate Logo
T#:8246787
Part#: 24-126
Ships on Oct 20, 2026
17% off MSRP $ 1,006.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 839.00 USD
17% off MSRP
$ 1,006.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 839.00 USD
Wagner Tuning - Corporate Logo
T#:42571264
Part#: P102061410.BR
Back Ordered
$ 449.00 USD
Free Shipping on orders $49 and up
Ensure your BMW N55 engine stays sealed and performs at its peak with the Wagner Tuning - Head Stud Set Brushed For BMW N55 Engine—your essential upgrade for power and reliability.


PIAA - Corporate Logo
T#:31158805
Part#: 85115
Ships on Oct 23, 2026
$ 77.99 USD
Free Shipping on orders $49 and up
Superior Bass Sports Horn Kit 330Hz + 400Hz 112Db

The Superior Bass Sports Horn Kit 330Hz + 400Hz 112Db is designed to make sure your presence is known with powerful, attention-grabbing sound. These high-performance sports horns feature:

  • Impressive Loudness: Delivers a powerful 112 decibels, ensuring you’re heard in any situation.
  • Dual Frequency: Includes 330Hz and 400Hz horns for a dynamic and distinct sound.
  • Lightweight & Durable: Constructed for easy installation with weather-resistant covers, built to withstand the elements.
  • Easy Installation: Quick and straightforward to install, enhancing vehicle safety with minimal effort.

The kit is a must-have for anyone looking to enhance their vehicle’s horn performance and visibility on the road.

Show More Show Less
Mishimoto - Corporate Logo
T#:23020165
Part#: MMBCC-CBTWO
In Stock
$ 160.99 USD
Free Shipping on orders $49 and up

Optimize your vehicle's performance and shield crucial components with the Mishimoto Compact 2-Port Baffled Oil Catch Can. This innovative solution effectively separates oil particles from PCV/CCV air using a 50-micron bronze filter, ensuring defense against oil blow-by for your intercooler, intake system, and vital parts. Constructed with a patented billet 6061 aluminum can sealed with Viton™ O-Rings, this catch can guarantees both durability and effectiveness.

Equipped with a universal mounting bracket, it allows adaptable installation and comes complete with two CNC-machined aluminum 1/2" barbed hose fittings. With an enhanced 3 oz internal capacity, service intervals are prolonged, while its fully serviceable filter and can ensure enduring functionality.

Engineered for safety in pressurized applications, the internal air diverter enhances oil separation by amplifying air turbulence. Available in black, red, or polished finishes, this catch can preserves proper octane levels, reducing potential detonation and promoting extended engine life.

The product package includes the Compact 2-Port Baffled Oil Catch Can, two Aluminum 1/2" Barbed Fittings, and a Universal Mounting Bracket, all backed by the Mishimoto Lifetime Warranty.

WARNING! Prop 65 may apply to this product.

Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to all companies selling products in California.

Prop 65 mandates listing any chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm.

For more information about California Prop 65 warning, visit: www.P65Warnings.ca.gov.

Show More Show Less