BMW X Series E71 (2008-2014)

Iwis Oil Pump Chain

T#:375888

Part#: 11417584079

In Stock

$ 63.99 USD

Add to Wish List

Qty

$ 63.99 USD

Add to Wish List

Should be replaced any time the oil pump is removed or chain noise is detected

IWIS Chain Tensioner - With Gasket Ring - BMW N52 N54 N55 3.0L ...

T#:43378595

Part#: 11317584723

In Stock at Vendor

$ 100.99

This product was last offered at the strikethrough price on
05-07-2026

$ 97.99 USD

Add to Wish List

Qty

$ 97.99 USD

Add to Wish List

Over time, your engine timing components begin to wear out. Tensioners weaken, chains can stretch, and timing chain guides can wear down. All of these lead to the possibility of the timing chain jumping teeth on the sprockets, causing your timing to shift. This could result in rough idle and reduced engine power, or even complete engine failure. Prevent damage to your engine with new timing components, such as this IWIS timing chain tensioner. Note, we recommend replacing timing components every 100K miles, or sooner, depending on the condition of the timing components.

Show More Show Less

IWIS N55 Engine Oil Pump Chain Kit - BMW E82/88 E9X F3X F25 F26 E70/7...

T#:36981080

Part#: 90001301

In Stock at Vendor

$ 314.36

This product was last offered at the strikethrough price on
05-04-2026

$ 270.41 USD

Add to Wish List

Qty

$ 270.41 USD

Add to Wish List

Prevent costly failure with this IWIS Engine Oil Pump Chain Kit! This kit contains all of the basic items needed to service your oil pump drive system and prevent failure long before it occurs. Chains can stretch and chain guides and tensioners can wear out, leading to the chain skipping teeth. This prevents the oil pump from being driven at the proper speeds. If not addressed, the chain could begin to "slip" over the gears, failing to drive the oil pump. When this occurs, oil pressure will drop suddenly, failing to properly lubricate sensitive internal engine components such as main bearings, rod bearings, and camshaft ledges and lobes, resulting in severe scoring and eventual engine failure.

Show More Show Less

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

BMC Performance Air Filter - E70, E71

T#:398714

Part#: FB654/20

In Stock at Vendor

$ 157.99 USD

Add to Wish List

Qty

$ 157.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Iwis Timing Chain - E60, E61, E71, E82, E88, E90, E92, E93, F01, F02,...

T#:361321

Part#: 11317516088

Ships in 10 Business Days

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

Replace your broken or damaged chain

BMC Performance Air Filter - F10, F11, F18, F07, F12, F13, F06, F01, ...

T#:398706

Part#: FB651/20

Back Ordered

$ 92.99 USD

Add to Wish List

Qty

$ 92.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

Iwis Timing Chain - N55 N20 N52

T#:579676

Part#: 50042415

Ships in 1 day

$ 114.17 USD

Add to Wish List

Qty

$ 114.17 USD

Add to Wish List

Iwis Timing Chain - N20 N55 N52

T#:362851

Part#: 11317584084

Ships in 5 Business Days

$ 109.99

This product was last offered at the strikethrough price on
07-01-2026

$ 109.03 USD

Add to Wish List

Qty

$ 109.03 USD

Add to Wish List

Active Autowerke Performance Catted Downpipes - Flanged - E70/71 E60/...

For Model Years 2010-2012 Only

For Model Years 2010-2012 Only - VIN Required for Purchase

T#:22822600

Part#: 11-041F

Ships in 10 Business Days

5% off MSRP $ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD

Add to Wish List

Qty

5% off MSRP

$ 2,999.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,849.99 USD

Add to Wish List

The S63 and N63 twin-turbo V8s are world-class powerplants, but they’ve got a breathing problem. From the factory, your BMW X5M, X6M, 550i, or 650i is suffocating under massive backpressure caused by restrictive, bulky catalytic converters that trap heat and kill momentum. If you want real power, you have to let those turbos spin. Active Autowerke’s Signature High-Flow Downpipes are the ultimate "no-compromise" upgrade for the serious BMW enthusiast. Hand-fabricated in Miami, these 3.0" downpipes utilize GESi G-Sport Ultra High Output technology. You get the raw performance and rapid spool of a track setup with the refined, odorless experience of a daily driver—and most importantly, no Check Engine Light. Why These Downpipes Belong on Your BMW: Turbo performance is all about the pressure differential. By clearing the path behind the turbine wheel, you allow the turbos to work significantly less to produce significantly more. Instant Turbo Response: Experience a massive reduction in lag with quicker spool-up and instant throttle tip-in. Massive Power Ceiling: The 4.5" GESi 400-cell cores are rated for 500hp to 850hp, ensuring they won't become a bottleneck as you climb the ladder of modifications. Clean & Odorless: Forget the "gas station" smell of catless downpipes. These proprietary precious-metal catalysts keep the air clean and your cabin comfortable. Hand-Built Precision These aren't mass-produced units. Each set is TIG-welded 304 stainless steel with cast upper V-band flanges for a factory-perfect, leak-free seal. Because Active Autowerke builds these in-house, the fitment is surgical—designed for a straightforward bolt-on installation with no cutting or welding required. Turner Fitment Note: To guarantee 100% accuracy for your build, please provide your VIN at checkout. Note: These are F-chassis specific; G-body vehicles with the N63B engine require a different configuration. Core Features: No CEL Guarantee: Optimized for catalytic efficiency to keep your dashboard clear. 49-State Legal: EPA Registered and fully OBD2 compliant (Excludes CA). Built for Heat: Rated to withstand up to 1,500°F and reaches operational efficiency in just 9 seconds. Legendary Durability: 304 stainless substrate is furnace-braised to the mantle for maximum vibration resistance. Warranty Protected: Includes a 5-year/50,000-mile structural warranty and a 2-year/25,000-mile catalyst core warranty.* Technical Specs: Material: TIG-Welded 304 Stainless Steel Tubing: Full 3.0" (76mm) Mandrel-Bent Piping Catalyst: GESi Ultra High Output (400 CPI) HP Rating: 500hp - 850hp Lead Time: Custom made-to-order (Approx. 2 weeks) *A Note on Burble Tunes: We love a good exhaust crackle as much as anyone, but "aggressive" burble or pop maps physically destroy catalytic substrates. Use of such tunes will void the warranty on the GESi core.

Show More Show Less

Active Autowerke A-Flow Catted Downpipes - S63/N63

For Model Years 2010-2012 Only

T#:51110141

Part#: 11-041AF

Ships in 3 Business Days

$ 2,279.00 USD

Add to Wish List

Qty

$ 2,279.00 USD

Add to Wish List

For the BMW enthusiast seeking an aggressive upgrade for their 2010–2012 X5M or X6M without the drawbacks of "stinky" exhaust or frequent error codes, Active Autowerke offers the Aflow Catted Downpipes. These units provide the performance benefits typically associated with track-only pipes while maintaining high-flow catalytic efficiency. This design prevents the raw fuel odor and excessive cabin drone often found in catless setups, making them the ideal choice for a performance-oriented daily driver. Each set is custom-made in Miami, ensuring an exact, surgical fit to the factory mounting points. By utilizing high-quality casted V-band flanges and premium materials, these downpipes offer a reliable, leak-free solution that enhances the sophisticated V8 exhaust note without triggering the Check Engine Light (CEL). Key Features: No CEL Guarantee: Advanced Aflow catalyst design avoids catalytic efficiency warnings on the dashboard. Refined Exhaust Note: Enhances the natural V8 growl while maintaining high-end luxury refinement. Cast V-Band Connections: Precision upper flanges ensure a perfect, factory-like seal to the turbo housing. Direct Bolt-On: Replaces bulky OEM ceramic converters with no cutting or welding required. Thermal Management: Efficiently handles the high heat output of the BMW twin-turbo V8 platform. U.S. Manufacturing: Fabricated in-house to meet Active Autowerke’s high standards of quality control. Specifications: Primary Material: TIG-Welded 304 Stainless Steel. Manufacturing Location: Miami, FL, USA. Inlet Type: Casted Stainless Steel Flange. Weight Reduction: Significantly lighter than the heavy factory ceramic catalytic assemblies. Finish: Industrial brushed stainless. Build Time: Custom made-to-order (Approx. 2 weeks).

Show More Show Less

Iwis - Engine Oil Pump Chain Kit - N20, N52, N54, N55

T#:54388527

Part#: 095854200

In Stock at Vendor

$ 268.99

This product was last offered at the strikethrough price on
06-14-2026

$ 266.99 USD

Add to Wish List

Qty

$ 266.99 USD

Add to Wish List

In high-performance environments, oil starvation is the ultimate enemy. If you're pushing your car on the track or the street, your engine relies on absolute consistency from the oil pump.

Project Cars

SELECT YOUR BMW

Sub-Categories

Iwis Oil Pump Chain

IWIS Chain Tensioner - With Gasket Ring - BMW N52 N54 N55 3.0L ...

IWIS N55 Engine Oil Pump Chain Kit - BMW E82/88 E9X F3X F25 F26 E70/7...

BMC Filter Cleaning Kit

BMC Performance Air Filter - E70, E71

Iwis Timing Chain - E60, E61, E71, E82, E88, E90, E92, E93, F01, F02,...

BMC Performance Air Filter - F10, F11, F18, F07, F12, F13, F06, F01, ...

Active Autowerke Signature Trunk Emblem

Iwis Timing Chain - N55 N20 N52

Iwis Timing Chain - N20 N55 N52

Active Autowerke Performance Catted Downpipes - Flanged - E70/71 E60/...

Active Autowerke A-Flow Catted Downpipes - S63/N63

Iwis - Engine Oil Pump Chain Kit - N20, N52, N54, N55

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results