BMW Suspension Parts for BMW X Series E71 (2008-2014)

Clear BMW chassis
Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Schwaben Coil Spring Compressor
Schwaben - Corporate Logo
T#:363968
Part#: 013892SCH01A
In Stock
$49.95
Free Shipping on orders $49 and up
$49.95
Free Shipping on orders $49 and up
This spring compressor is built with ease of use and safety in mind.
Rear Pitman Arm "Dog Bone"- E23 E24 E28 E34 E32
Lemforder - Corporate Logo
T#:72
Part#: 33321126476
In Stock
$39.95
Free Shipping on orders $49 and up

This is the rear pitman arm that mounts between the trailing arm and the rear axle. It is also referred to as the "dog bone" or the "drop arm". Over time this, wear and tear will necessitate its replacement. OEM Lemforder's replacement will replace everything back to new condition.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMWs:
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1983-1989 E24 BMW 633csi 635csi M6
1983-1987 E23 BMW 733i 735i

Show More Show Less
Control Arm Bushing Remover & Installer - Bavarian Autosport
Bav Auto Tools - Corporate Logo
T#:580391
Part#: B8800078
In Stock
$83.95
Free Shipping on orders $49 and up
Don't struggle with hammers and improper techniques, drive your bushings out easily with this control arm bushing remover and installer.

Schwaben Strut Spring Compressor Set
Schwaben - Corporate Logo
T#:383404
Part#: 013845SCH01A
In Stock
$222.95
Free Shipping
Professional Spring Compressor Kit will compress most styles of strut springs. This is a safe and efficient way to compress strut springs. This set is supplied with everything you need to get the job done like a pro. Each jaw has safety lips to eliminate slip and is designed to fit the pitch of the spring to ensure maximum surface contact between the jaws and the spring, thus eliminating the risk of the compressor slipping around the spring. The spindle is driven by a 21mm hex nut and is not designed to be used with a impact gun. Hand turn the nut with a wrench or hand ratchet.
Show More Show Less

H&R Sport Spring Set - E70 X5 / E71 X6 - WITH Self Leveling
H&R - Corporate Logo
T#:2241
Part#: 50435-2
In Stock
$284.95
Free Shipping
Front Lowering -2.0"
Rear Lowering -1.0"

This kit includes 2 front springs and 2 rear links.
Enhance the look of your BMW E70 X5 or E71 X6 with a reduced fender well gap. H&R Sport Springs lower the vehicle center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicle�s suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H&R Sport Springs are the number one upgrade for your vehicle.

This spring set fits all 2007, 2008 and newer X5 3.0si, X5 4.8i, X5 M and X6 xDrive35i, X6 xDrive50i, X6 M WITH self-leveling suspension only.

This item fits the following BMWs:
2007+ E70 X5 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive48i X5 M
2007+ E71 X6 BMW X6 xDrive35i X6 xDrive50i X6 M
Show More Show Less
Strut Nut Socket Set - 5 Piece
Schwaben - Corporate Logo
T#:377177
Part#: 003046SCHKT
Inventory On Order, ETA Nov 24, 2021
$63.95
Free Shipping

To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Kit Features:

  • 18mm
  • 19mm
  • 21mm
  • 22mm
  • 24mm
Show More Show Less

Schwaben Shock And Strut Removal Set
Schwaben - Corporate Logo
T#:583366
Part#: 026901SCH01A
In Stock
$89.95
Free Shipping on orders $49 and up

When dismantling a suspension strut sometimes the securing nut can be difficult to access and the central strut itself needs to be held still while the nut is undone. This new Shock Absorber Tool Kit is designed to overcome these problems and make the job quick and easy.

The go-through design of the sockets and ratchet design allows the strut lock extensions to go right through the middle of the ratchet and socket. Five different strut lock extensions are included, to fit a variety of applications. Seven go-through deep sockets (16, 17, 18, 19, 21, 22 and 24mm) are included, plus a sliding T-bar.

Once the spring is compressed and the top plate is free, simply choose the correct strut lock extension and socket. Then fit the socket and the ratchet handle, and fit the strut lock straight through. The central strut is held steady, and the securing nut is quickly removed.

Specifically designed for repairing and replacing shock absorbers and struts
Contents: 7 - Go Thru' deep sockets: 16/17/18/19/21/22/24mm
3 x 1/2"D Hex bits: 6mm/7mm/8mm,
1 x sliding T-bar 1/2"D,
2 x slot bit sockets 5 x 8mm, 6 x 8mm x 1/2"D
Also includes 1 x 21mm Hex Go Thru' ratchet
Packed in a blow mold case for easy storage
For California Prop 65 warning see: www.P65Warnings.ca.gov.

Show More Show Less
Turner Motorsport Coilover Covers - 370mm
Turner Motorsport - Corporate Logo
T#:583230
Part#: TMS-370MMCOILCOV