The camshafts are responsible for opening and closing the valves in time with the movement of the pistons. Sometimes the lobes can become worn or scored, necessitating a replacement of the entire shaft. Performance options are also available with more aggressive cam profiles that allow increased lift and duration.
This timing chain camshaft gear controls the camshaft position and timing and is located toward the front of the engine. Located on the exhaust side of the engine at the front end of the exhaust camshaft. Sometimes changed when replacing the timing chain. T#34658 may also be required when servicing this part.
Show More Show Less
If you have to remove your harmonic balancer pulley, you must secure your crankshaft. This is the exact tool you need Loosens central crankshaft bolt on N63 & S63 engines Services various 2008-2013 BMW Basic Instructions for use: Removal: Remove the engine drive belt. Use the Crankshaft Pulley Holder, to prevent the crankshaft from rotating while loosening the crankshaft balancer bolt. Remove the crankshaft balancer bolt. Discard the bolt. Remove the crankshaft balancer. Install: Install the crankshaft balancer. Install a NEW crankshaft balancer bolt. Use the Crankshaft Pulley Holder to prevent the crankshaft from rotating while tightening the crankshaft balancer bolt. Tighten the bolt to Manufacturer recommended ft. lbs. Install the engine drive belt.
Show More Show Less
A common source of exhaust-related codes, VANOS, and boost-related issues can often be traced back to this cam gear. If yours is worn and failed, replace it with this quality replacement part from URO.
Show More Show Less
