BMW Maintenance & Tune-Up Parts for BMW X Series E71 (2008-2014)

Introducing our Turner Motorsport Crank Seal Guard – the essential shield for your BMW's engine integrity. Safeguarding the heart of your vehicle, this meticulously designed guard offers robust protection for the crank seal concealed behind the harmonic balancer.

Considered an indispensable maintenance component for your BMW, the Crank Seal Guard acts as a crucial defense against a potential and preventable catastrophe involving your accessory belt. Facing the reality of potential oil or coolant leaks in your engine, this guard becomes a reliable barrier, preventing these fluids from reaching the accessory belt. The consequence of a compromised belt includes walking, slipping, fraying, and rubber particles finding their way behind the harmonic balancer and into the crank seal – a scenario that can lead to severe engine failure.

Let's be honest, engine leaks are a common occurrence, and whether your engine is currently leaking or not, the Crank Seal Guard is a proactive measure against future threats. The wear and tear on the accessory belt due to oil and coolant exposure can result in slipping, tearing, or, worst-case scenario, belt snapping – posing a significant risk to your engine's well-being.

Prepare your car for the long haul and protect the vital components, It's not a matter of "if" but "when" your belt will become a problem, and our Crank Seal Guard is your proactive solution. Rigorously tested on N52/N54/N55 and S55 for 100% confirmed fitment, it stands as a reliable guardian for your engine's health. Invest in the protection your BMW deserves with the Turner Motorsport Crank Seal Guard.

Key benefits:

Protect crank seal from rogue accessory belts and their shredded debris
Optimized to fit N52, N54, N55, and S55 engines
Rigid design that fits within the space constraints between the engine block and harmonic balancer
Zinc-coated fasteners for corrosion and oxidation resistance
Design:

Modeled and designed from FARO laser scanning and Solidworks CAD
Manufactured from 6061 billet aluminum
Turner blue anodizing
Installation:

It is a good idea to note how your belt is routed before starting the installation.

2 securing bolts for crank seal guard - Torque value of 20Nm

You will find either 6 or 8 E10 bolts are holding the harmonic balancer depending on the engine.

E10 (P#11237564511) ​
​N52: 6 bolts - Torque value of 25nm
N54: 6 bolts - Torque value of 35nm
N55: 8 bolts - Torque value of 35nm

E10 (P#11237575488)
S55: 8 Bolts - Torque value of 35nm

The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.

To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.

Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.

Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.

Key Features:

Cast aluminum construction offers superior strength and resilience over the OE plastic pan

Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating

Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance

Hard coat anodized finish provides exceptional corrosion resistance and longevity

Integrated magnets collect metallic debris, protecting transmission internals

Installation:

Vehicle plastic belly pans may vary. Because the Turner 8HP transmission pan is taller to allow for increased fluid capacity, some vehicles may require trimming of the plastic belly pan, or the belly pan may need to be installed over the transmission pan where it may make contact.

The N54 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load. This is most apparent under high-rev downshifts or in the case of increased boost pressure which creates more stress on the engines rotating assembly. In order to keep this from happening, the crank bolt must be secured to the hub to keep it from backing off, but this can be a tricky solution since a simple dab of Loctite will not suffice. 

Here is an easy, and cost-effective way to secure the situation; The VTT N54 crank bolt capture. This lightweight and durable ring slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub and eliminating its ability to spin. The VTT-CBC is 100% Billet Aircraft Grade Aluminum, Anodized black to protect it from the elements, and give it a stealth look. What's more is that it weighs only 1.3 Oz's meaning you aren't adding excess mass to the crankshaft which will avoid any imbalance or vibration issues.

While this is not a full fix for all crank hub spinning issues, the engineers at Vargas have found most issues have stemmed from the bolt itself backing out, and this is a great way to keep that from happening. Extremely lightweight at only 1.3 Oz's it adds virtually no weight to the crank which is important for balance and vibration.

Kit Includes:

• 1x Aluminum Crank Bolt Capture
• 8x Fasteners Gr. 12.9

This part fits the following BMWs:
2006-2013 N54 

The ZF 8-speed automatic transmission (8HP) has become the go-to choice for performance enthusiasts, delivering lightning-fast shifts, impressive torque handling, and ample tuning potential. However, the stock transmission pan falls short in critical areas. Its plastic construction, integrated non-replaceable filter, and limited fluid volume leave little margin for error in demanding conditions.

To address these limitations, we've engineered a premium solution: a cast aluminum transmission pan that boosts durability, cooling performance, and serviceability. Designed with enthusiasts in mind, this upgraded pan increases fluid capacity by 1 liter to reduce transmission temperatures and improve long-term reliability, even under aggressive driving or track conditions.

Built to outlast and outperform the OEM plastic pan, the aluminum construction resists damage from road debris and eliminates the risk of cracking. Our pan is hard-coat anodized in black for superior corrosion protection and a long-lasting finish that looks as good as it performs.

Our aluminum pan upgrade is engineered to work seamlessly with the OEM G8X 8HP transmission filter (24007855263), allowing for easy and cost-effective fluid service. Integrated magnets help to trap metal particulate, extending the life of your transmission by keeping contaminants out of the fluid.

Key Features:

Cast aluminum construction offers superior strength and resilience over the OE plastic pan

Increased fluid capacity (+1L) enhances thermal management and reduces the risk of overheating

Serviceable design uses the OEM G8X transmission filter for easy, affordable maintenance

Hard coat anodized finish provides exceptional corrosion resistance and longevity

Integrated magnets collect metallic debris, protecting transmission internals

Kit Includes:

Turner Motorsport ZF 8HP High-Capacity Aluminum Transmission Pan
OE Hengst G8X Filter Installation Kit
Installation:

Vehicle plastic belly pans may vary. Because the Turner 8HP transmission pan is taller to allow for increased fluid capacity, some vehicles may require trimming of the plastic belly pan, or the belly pan may need to be installed over the transmission pan where it may make contact.

High performance ignition kit for your N54 featuring Brisk 1 step colder spark plugs, Turner high performance ignition coils and grease to make sure you have no issues at your next maintenance interval!

Our BMW ignition coils are designed with performance and efficiency in mind. An engine needs 3 main components to run (Air, Fuel, Spark.) Turner ignition coils are modified to increase energy output; more energy output results in a faster, more efficient and consistent burn to make sure your fuel is being utilized to its maximum potential. Our signature Turner ignition coils feature a blue housing that give your engine the performance and aesthetic your looking for. All Turner Ignition coils are back by a confidence inspiring 2 year warranty.

Ignition coils should be changed every 40,000 - 60,000 miles and are an important maintenance item due to the essential role they play in your engines health, performance and efficiency. Choose Turner Ignition Coils to keep your engine running strong and healthy.

Features and Benefits:

Increased performance
New spark plugs and grease
Direct fitment
Signature Turner Blue ignition coils
Ignition coils backed by a 2-year warranty