BMW Drive Belts & V-Belts for BMW X Series E71 (2008-2014)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's drive belts are wear items, and will degrade and crack over time. Don't wait until you have a belt failure... don't get stranded! Replacing your BMW's belts, such as the alternator belt, power steering belt, air conditioning AC belt, or serpentine belt is a low cost insurance policy to preventing a break down -- or worse, engine damage. We recommend checking your belts every 10,000 miles. If your belts have excessive cracks, dry rot, missing teeth and/or grooves, are cause noise, it's time for new ones.

While also inspecting your serpentine belts, also check for wear or resistance in the pulleys. The tensioner pulley and deflection pulley are the primary sources for belt squealing. The rubber-isolated pulleys can also break apart, leading to total belt failure. We sell the tensioner and deflection pulleys for the M50 engine family used in the E34, E36, E39, E46, X5, Z3, and Z4.

Sub-Categories

Sort By:

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:558795
Part#: VTT-CRANKHUB-1
Ships in 6 Business Days
$ 889.99 USD
Free Shipping
$ 889.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
OEM Accessory Belt Service Kit - N54 3.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Packaged by Turner - Corporate Logo
T#:554448
Part#: N54ACCKT
In Stock
Sale - Save 15% $ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 168.26 USD
Free Shipping
Sale - Save 15%
$ 197.99

This product was last offered at the strikethrough price on
04-15-2026

$ 168.26 USD
Free Shipping
Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or overheated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.
Show More Show Less
Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Vargas Turbo Technologies - Corporate Logo
T#:638889
Part#: VTT-CRANKGUARD
In Stock
Starting at $ 89.99 USD
Free Shipping
Starting at $ 89.99 USD
Free Shipping
It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue
Show More Show Less

Genuine BMW Vibration Damper
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:32906
Part#: 11237574827
Ships in 3 Business Days
6% off MSRP $ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 98.99 USD
Free Shipping
6% off MSRP
$ 104.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 98.99 USD
Free Shipping


Genuine BMW Hub -
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

MMR Crank Hub Kit - N55/S55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
MMX Performance - Corporate Logo
T#:4565824
Part#: MMR20-1003FK
Ships in 3 Business Days
$ 849.99 USD
Free Shipping
$ 849.99 USD
Free Shipping
Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.
Show More Show Less
Genuine BMW Belt Tensioner - E70/1 FXX S/N63 4.4L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:33665
Part#: 11287549873
In Stock
3% off MSRP $ 179.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 173.99 USD
Free Shipping
3% off MSRP
$ 179.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 173.99 USD
Free Shipping


Genuine BMW Belt Tensioner
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5 X5,E71 X6,F01,F02,F06,F10,F12,F13,F15,F16

Fits BMW Engines including:
N63,N63N,S63,S63N

Show More Show Less

Genuine BMW Crank hub
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:32901
Part#: 11237570107
Ships in 3 Business Days
5% off MSRP $ 167.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.99 USD
Free Shipping
5% off MSRP
$ 167.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 157.99 USD
Free Shipping


Genuine BMW Hub -
This item fits the following BMW Chassis:
E71,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

VAC V2 Harmonic SuperDamper By ATI - BMW N54 3.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
ATI Performance Products - Corporate Logo
T#:639879
Part#: VAC-HPCD-N54
Ships in 9 Business Days
$ 1,059.99 USD
Free Shipping
$ 1,059.99 USD
Free Shipping
If you are breaking crankshafts and oil pumps, the cause may be a mystery to you as it has been to many of our customers. We know that controlling the harmonic resonance of the BMW 6 is highly important as RPMs rise, but the ideal configuration of the inline-6 motor makes even experienced engine builders overlook some fundamental principals of engine harmonics that can be destructive. ATI Performance Products has partnered with VAC Motorsports to develop new dampers for BMW 2.5L, 2.8L, 3.0L and 3.2L straight-6 engines found in the E36 and E46 M3, E9X and E6X, as well as newer Z3s and Z4s. These dampers eliminate crankshaft harmonic vibration, which allows the engine to produce more horsepower and torque, while also reducing internal engine wear at the same time. Broken oil pumps and timing chains will be a thing of the past! When used with a VAC accessory pulley, these dampers are a direct replacement over the OEM balancer. They have a 7” outer diameter and include OEM style timing alignment tabs. BMW enthusiasts should know that all ATI Super Dampers exceed SFI 18.1 Safety Certification and are approved for competition. The advantages of the ATI SuperDamper include eliminating vibration issues with inline 6 engines equipped with lightweight clutch and flywheel assemblies, reduced bearing, engine accessories, oil pump wear, and compatibility with underdrive pulleys. Includes lightweight VAC Billet Crankshaft Pulley.
Show More Show Less

Genuine BMW Deflection Pulley
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:391246
Part#: 11288673720
In Stock
8% off MSRP $ 82.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 75.99 USD
Free Shipping
8% off MSRP
$ 82.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 75.99 USD
Free Shipping

 


Genuine BMW Deflection Pulley -
This item fits the following BMW Chassis:
E71,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less

Genuine BMW Vibration Damper
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:32905
Part#: 11237573655
In Stock
11% off MSRP $ 713.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 641.99 USD
Limited Qty Sale
Free Shipping
11% off MSRP
$ 713.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 641.99 USD
Limited Qty Sale
Free Shipping


Genuine BMW Vibration Damper -
This item fits the following BMW Chassis:
E71,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less
Genuine BMW Accessory Belt Kit - E70/1 F01/02 F07/10 F12
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:554455
Part#: 11287631824KT
Ships in 6 Business Days
$ 253.99 USD
Free Shipping
$ 253.99 USD
Free Shipping

Over time, accessory belts begin to wear out and crack. This can lead to the belt slipping, squeaking, or even snapping. Replace your belts and tensioners on a regular basis to ensure you don't end up stranded on the side of the road with a dead battery or over heated engine due to a bit of simple overlooked maintenance. This kit includes all of the items that will need replaced such as the belts, tensioners, and hardware.

Fits the following BMWs:
E70 BMW
X5 M, xDrive50i
E71 BMW X6 M, xDrive50i
F01/02 BMW 750i/Li, 750i/Li xDrive
F07/F10 BMW 550i/i xDrive
F12 BMW 650i/i xDrive

Show More Show Less
Genuine BMW Main drive belt - E71 X6 xDrive35i N54 3.0L F02 740Li N54...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:14480
Part#: 11287628279
Ships in 3 Business Days
14% off MSRP $ 85.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 73.99 USD
Free Shipping
14% off MSRP
$ 85.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 73.99 USD
Free Shipping


Genuine BMW Ribbed V-Belt - 8Dpk 1833
This item fits the following BMW Chassis:
E71,F01,F02

Fits BMW Engines including:
N51,N54



Genuine BMW Accessory Belt Tensioner - F01 F02 740Li 740i E71 X6 xDri...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:33690
Part#: 11287627052
Ships in 3 Business Days
6% off MSRP $ 179.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 168.99 USD
Free Shipping
6% off MSRP
$ 179.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 168.99 USD
Free Shipping


Genuine BMW Belt Tensioner -
This item fits the following BMW Chassis:
E71,F01,F02

Fits BMW Engines including:
N54

Genuine BMW Deflection Pulley - F01 F02 740Li 740i E71 X6 xDrive35i ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:33691
Part#: 11287627053
Ships in 3 Business Days
8% off MSRP $ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping
8% off MSRP
$ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping


Genuine BMW Deflection Pulley -
This item fits the following BMW Chassis:
E71,F01,F02

Fits BMW Engines including:
N54

Genuine BMW Deflection Pulley - N55
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:33689
Part#: 11287615130
Ships in 3 Business Days
8% off MSRP $ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping
8% off MSRP
$ 102.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 94.99 USD
Free Shipping

This is an Genuine BMW Idler Pulley, also known as the roller pulley or deflection pulley. The idler pulleys are known to be the primary sources for 'belt squealing'. The pulley is also encased in rubber which will crack over time. If left without service the rubber could fail completely, chucking the belt and leaving you stranded. Replacement is a very simple procedure and can be done anytime the fan is off the engine (belt replacement, water pump service, alternator replacement, etc).

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


Genuine BMW Deflection Pulley -
This item fits the following BMW Chassis:
E70,E71,F06,F07,F10,F12,F13,F15,F16,F01,F02,

Fits BMW Engines including:
N55

Show More Show Less

Genuine BMW Accessory Belt Tensioner Assembly - N54 3.0L
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:360624
Part#: 11287563927
Ships in 3 Business Days
6% off MSRP $ 179.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 168.99 USD
Free Shipping
6% off MSRP
$ 179.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 168.99 USD
Free Shipping
This Genuine BMW mechanical tensioner assembly is designed to keep the serpentine belt at the correct pressure against the pulleys. Many BMW's can have either a hydraulic or mechanical belt tensioner. Please check to see which tensioner type you need before ordering.
Show More Show Less

Genuine BMW Accessory Belt Tensioner Assembly
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:189104
Part#: 11288604266
Ships in 3 Business Days
6% off MSRP $ 179.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 168.99 USD
Free Shipping
6% off MSRP
$ 179.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 168.99 USD
Free Shipping


Genuine BMW Mechanical Belt Tensioner -
This item fits the following BMW Chassis:
E71,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,S55

Show More Show Less
Genuine BMW Deflection Pulley - E71 X6 xDrive35i N54 3.0L F02 740Li N...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:33666
Part#: 11287559887
Ships in 3 Business Days
8% off MSRP $ 82.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 75.99 USD
Free Shipping
8% off MSRP
$ 82.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 75.99 USD
Free Shipping


Genuine BMW Deflection Pulley -
This item fits the following BMW Chassis:
E71,F01,F02

Fits BMW Engines including:
N54


Genuine BMW A/C Belt Deflection Pulley - E71 X6 xDrive35i N54 3.0L F0...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Genuine BMW - Corporate Logo
T#:33667
Part#: 11287559889
Ships in 3 Business Days
8% off MSRP $ 82.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 75.99 USD
Free Shipping
8% off MSRP
$ 82.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 75.99 USD
Free Shipping


Genuine BMW Deflection Pulley -
This item fits the following BMW Chassis:
E71,F01,F02

Fits BMW Engines including:
N54