BMW Drivetrain Parts for BMW X Series E71 (2008-2014)

Clear BMW chassis

Please ensure your correct model is selected

Building your perfect BMW is more than just adding horsepower and stiff suspension. Your drivetrain needs attention in order to deliver power effectively. Most BMWs feature comfortable clutch discs, heavy flywheels, long shifter throws, and open differentials. The drivetrain transmits power to the wheels, but can also be a source of power loss when it is designed for comfort rather than performance. Everything on this page will help you improve your power delivery and driving experience by providing custom Limited Slip Differentials, Short Shift Conversions, Performance Clutch Discs, Lightweight Flywheels, and anything else your BMW needs to be the perfect driving experience.

Sub-Categories

Sort By:

Automatic Transmission Service Kit
For GA8HP70Z or GA8HP45Z automatic transmissions
10X Entries Into Our F80 M3 Sweepstakes
For GA8HP70Z or GA8HP45Z automatic transmissions
Packaged by Turner - Corporate Logo
T#:5389733
Part#: 24118612901TMSKT
In Stock
Sale - Save 20% $ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 173.28 USD
Free Shipping
Sale - Save 20%
$ 215.99

This product was last offered at the strikethrough price on
05-03-2026

$ 173.28 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. Kit Includes: Automatic transmission filter with associated hardware Oil pan gasket Drain plug with sealing washer Fill plug with sealing washer 7 Liters of Liqui Moly Top Tec ATF 1800 Turner Motorsport recommends performing a full service on your automatic transmission every 60,000 miles
Show More Show Less
JXB Performance - Corporate Logo
T#:6076533
Part#: BMW12A0
In Stock
Starting at $ 299.99 USD
Free Shipping
Starting at $ 299.99 USD
Free Shipping
The stock center support bearing carrier is designed to reduce NVH to the cabin by loosely holding the center bearing with a flimsy rubber bushing. During launches and shifts, the driveshaft is allowed to travel off-center, decreasing throttle response and causing oscillations through the drivetrain. As they age, the carrier rubber sags and dry rots, ruining the driveshaft alignment. Fix or prevent this common issue with JXB Performance's Driveshaft Center Support Bearing Upgrade! JXB utilizes a simple but extremely effective 2-piece design which allows you to install this upgrade and replace bushings with ease. The stock center support carrier is simply cut away, allowing the JXB bushings to "clamp" down on the driveshaft bearing and hold the driveshaft securely in place, maintaining driveshaft alignment at all times. Two bushing options are available for this kit, Street and Track, both of which are many times better than the stock bushings: The street bushings absorb most of the NVH from the drivetrain. Some light NVH is possible at some speeds in the form of a soft hum. (With a modified exhaust or windows down, you’ll probably never hear it) The track bushings are for those who want no-compromise drivetrain performance. These may create a substantial amount of cabin noise. Not sure which is for you? Try them both, they’re interchangeable! Installation does not require the removal of the driveshaft. The 2-part design clamps around the OEM bearing. The old carrier must be removed, so a cutting tool is required. Looking for replacement or additional bushings? See T#4799658 for replacement street bushings and T#4799659 for replacement track bushings.
Show More Show Less
Driveshaft Carrier Spare Bushing Set - Street
Spare bushings only - does not include new carrier assembly
JXB Performance - Corporate Logo
T#:4799658
Part#: BSH04A0
Ships in 5 Business Days
$ 29.99 USD
Free Shipping
$ 29.99 USD
Free Shipping
Refresh all bushings in your driveshaft carrier kit. Please note that the bushings you receive will depend on your specific model of carrier and may not match the picture.

AGA Tools - Corporate Logo
T#:5189118
Part#: AGA-DSW-50
Ships in 8 Business Days
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
This tool is a must to properly disconnect the driveshaft.

Driveshaft Carrier Spare Bushing Set - Track
Spare bushings only - does not include new carrier assembly
JXB Performance - Corporate Logo
T#:4799659
Part#: BSH04A1
In Stock
$ 29.99 USD
Free Shipping
$ 29.99 USD
Free Shipping
Refresh all bushings in your driveshaft carrier kit. Please note that the bushings you receive will depend on your specific model of carrier and may not match the picture.
Automatic Transmission Service Package w/ PPE Heavy Duty Pan - Black ...
For GA8HP70Z or GA8HP45Z automatic transmissions
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:1241340
Part#: 24118612901T3KT
Back Ordered
$ 490.99

This product was last offered at the strikethrough price on
08-04-2026

$ 484.99 USD
Free Shipping
$ 484.99 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!
Show More Show Less

AGA Tools - Corporate Logo
T#:5175755
Part#: AGA-DSH-40
Ships in 8 Business Days
$ 245.99 USD
Free Shipping
$ 245.99 USD
Free Shipping
Now removing the driveshaft can be a single man job!
Automatic Transmission Service Kit - 8HP Automatic Transmissions ...
For GA8HP70Z or GA8HP45Z automatic transmissions
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:554535
Part#: 8HPATSKT
In Stock
Sale - Save 1% $ 384.99

This product was last offered at the strikethrough price on
08-04-2026

$ 381.23 USD
Free Shipping
Sale - Save 1%
$ 384.99

This product was last offered at the strikethrough price on
08-04-2026

$ 381.23 USD
Free Shipping

Automatic transmissions are reliable, shift smoothly, and can last without issue so long as they are properly maintained. Over time, the transmission fluid becomes thick and the filter becomes contaminated with small metal particles. This can cause excess wear, high transmission operating temperatures, and eventual failure. To prevent this we recommend changing your filter, fluid, and seals to ensure your transmission continues to operate flawlessly. We recommend filter and fluid changes every 50,000 miles.

Kit Includes:

  • Automatic transmission filter with associated hardware
  • Oil pan gasket
  • Drain plug with sealing washer
  • Fill plug with sealing washer
  • 7 quarts automatic transmission fluid

Fits the following BMW chassis with 8 speed transmissions:
E70, E71, F01, F02, F06, F07, F10, F12, F13, F13, F15, F16, F22, F23, F25, F26, F30, F31, F32, F33, F34, F36, G11

Show More Show Less

AGA Tools - Corporate Logo
T#:5175654
Part#: AGA-SS-8-14-K
Ships in 8 Business Days
$ 169.00 USD
Free Shipping
$ 169.00 USD
Free Shipping
Due to minimal clearance, it’s difficult to get a hex socket in the gaps to remove plugs on rear differentials, transfer case and other engine drain/fill plugs.

AGA Tools - Corporate Logo
T#:5189117
Part#: AGA-STA
Ships in 8 Business Days
$ 199.99 USD
Free Shipping
$ 199.99 USD
Free Shipping
Easily torque your driveshaft to specifications.
Meyle Automatic Transmission Oil Pan With Transmission Filter - 8HP45...
For GA8HP70Z or GA8HP45Z automatic transmissions
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:381067
Part#: 24118612901
Ships on Sep 21, 2026
$ 118.99 USD
Free Shipping
$ 118.99 USD
Free Shipping
BMW claims their transmission fluid to be a "lifetime" fluid, however is recommended to be changed every 60,000 miles to ensure a longer transmission life. Though not exposed to the same level of heat and contamination as engine oil, transmission oil still breaks down over time due to heat and becomes contaminated as your transmission wears. Old contaminated oil can lead to excessive wear and tear on sensitive transmission components which could lead to slow shifting, slips, and even complete failure. This is also true for the transmission filter integrated into the transmission fluid pan. The filter removes metal particles from the transmission fluid and eventually begins to clog, preventing fluid from passing through the filter easily. This leads to excessive wear and a reduced transmission lifespan if not changed. This high-quality Meyle transmission pan includes a new filter and is quintessential for a correct and full service.
Show More Show Less
Automatic Transmission Service Package w/ PPE Heavy Duty Pan - Raw Fi...
For GA8HP70Z or GA8HP45Z automatic transmissions
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:1241337
Part#: 24118612901T1KT
Back Ordered
Sale - Save 1% $ 458.99

This product was last offered at the strikethrough price on
08-04-2026

$ 452.95 USD
Free Shipping
Sale - Save 1%
$ 458.99

This product was last offered at the strikethrough price on
08-04-2026

$ 452.95 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!
Show More Show Less


Automatic Transmission Service Package w/ PPE Heavy Duty Pan - Brushe...
For GA8HP70Z or GA8HP45Z automatic transmissions
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:1241338
Part#: 24118612901T2KT
Back Ordered
$ 490.99

This product was last offered at the strikethrough price on
08-04-2026

$ 484.99 USD
Free Shipping
$ 484.99 USD
Free Shipping
Over the life of a vehicle, the transmission can often be overlooked when performing routine maintenance. If left unserviced, the automatic transmission fluid will break down, causing the valve body and filter to become contaminated with deposits and sludge. This will lead to poor shifting, slipping, and ultimately, transmission failure. For your 8-speed transmission, BMW recommends replacing your entire transmission pan and filter as the stock pan is constructed of plastic. This plastic pan will experience numerous drastic heat cycles over its lifetime, causing it to become weak and brittle, leading to potential catastrophic failure. Not only is this dangerous, but this is also very expensive when factoring in regular services. Upgrade your BMW's ZF transmission pan to PPE's Heavy-Duty Aluminum Transmission Pan and be done with pan replacements! PPE's one-of-a-kind transmission oil pan is cast from high-strength aluminum, allowing this pan to be used for the life of your transmission while also providing multiple benefits over your stock pan. Thanks to the thicker aluminum construction, internal heat fins, and integrated external cool fins, this pan helps promote reduced transmission fluid temperatures. PPE's trans pan has also been designed to allow for an additional quart of transmission fluid. The combined benefits of both cooler trans fluid and greater fluid capacity results in better lubrication, increased service life, and longer track sessions!
Show More Show Less
Meyle Automatic Transmission Pan & Filter Kit - GA6HP26Z - BMW E60 E6...
5X Entries Into Our F80 M3 Sweepstakes
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:579244
Part#: 3003250000
In Stock
Sale - Save 7% $ 214.99

This product was last offered at the strikethrough price on
05-15-2026

$ 198.88 USD
Free Shipping
Sale - Save 7%
$ 214.99

This product was last offered at the strikethrough price on
05-15-2026

$ 198.88 USD
Free Shipping
BMW claims their transmission fluid to be a "lifetime" fluid, however is recommended to be changed every 60,000 miles to ensure a longer transmission life. Though not exposed to the same level of heat and contamination as engine oil, transmission oil still breaks down over time due to heat and becomes contaminated as your transmission wears. Old contaminated oil can lead to excessive wear and tear on sensitive transmission components which could lead to slow shifting, slips, and even complete failure. This is also true for the transmission filter integrated into the transmission fluid pan. The filter removes metal particles from the transmission fluid and eventually begins to clog, preventing fluid from passing through the filter easily. This leads to excessive wear and a reduced transmission lifespan if not changed. This high-quality Meyle transmission pan includes a new filter and is quintessential for a correct and full service. Included: Meyle Transmission Pan w/ Integrated Filter Transmission Pan Gasket Drain Plug Installation Hardware Control Unit Plug Not sure if this kit is right for your BMW? Contact our sales staff with your VIN to confirm the exact part you need.
Show More Show Less
GSP North America - Corporate Logo
T#:389706
Part#: NCV27541
Ships in 3 Business Days
$ 161.99 USD
Free Shipping
$ 161.99 USD
Free Shipping

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

E70 BMW X5

E71 BMW X6

Show More Show Less

GSP North America - Corporate Logo
T#:389710
Part#: NCV27540
Ships in 2 Business Days
$ 131.99 USD
Free Shipping
$ 131.99 USD
Free Shipping

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

 

This item fits the following BMWs: 

E70 BMW X5

E71 BMW X6

Show More Show Less

JXB Performance - Corporate Logo
T#:6151351
Part#: BMW12A0-T
Ships in 6 Business Days
$ 299.99 USD
Free Shipping
$ 299.99 USD
Free Shipping
The stock center support bearing carrier utilizes an extremely thin layer of rubber to secure the driveshaft, allowing for minimal movement to effectively insulate the cabin from noise, vibration, and harshness (NVH). However, this design is less effective at maintaining proper bearing alignment under heavy loads. Over time, it allows the bearing to gradually sag, disrupting the driveshaft alignment and introducing play in the driveline during gear shifts and throttle application. The original equipment manufacturer (OEM) rubber bushing has a tendency to sag, become brittle, and eventually deteriorate, resulting in dry rot and cracking. Even in well-maintained vehicles, the stock bushing can develop cracks in as little as 5-10 years. When the bushing loses its integrity, it can lead to pronounced vibrations, clunking noises, and increased stress on the bearing. Adding to the challenge, the stock carrier is permanently molded onto the center support bearing, making replacement a difficult task that typically necessitates specialized tools.
Show More Show Less