BMW Fuel System Parts for BMW X Series E71 (2008-2014)

Clear BMW chassis

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:

VTT N54 Vacuum Pump Block Off Plate

T#:11497328

Part#: VTT-N54-VACUUM-B

In Stock

$ 127.99 USD

Add to Wish List

Qty

$ 127.99 USD

Add to Wish List

Looking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes Block Plate Note – Plates may come in a clear or anodize black finish depending on stock on hand

Show More Show Less

VTT BMW N54 “DI Injector” Delete Kit

T#:11497326

Part#: VTT-N54-DI-DELET

Ships in 1 Business Day

$ 339.99 USD

Add to Wish List

Qty

$ 339.99 USD

Add to Wish List

Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following 6 – 310 Stainless DI Delete fittings 3 – Hold down brackets Completetion of this kit will require the purchase of HPFP delete plate - ES# 4623950 PLEASE NOTE: THIS KIT REQUIRES EXTENSIVE MODIFICATIONS TO CONVERT YOUR ENGINE TO PI ONLY. THIS INCLUDES BUT IS NOT LIMITED TO A FULL PORT INJECTION SOLUTION, AND STAND-ALONE TO RUN THE PI SYSTEM. WE RECOMMEND THIS PNP SYSTEM USING THE MAXX ECU IT PROVIDES ALL YOU NEED TO GET UP AND RUNNING WITH PI ONLY ON THE TUNING SIDE OF THINGS – https://www.pnpecu.com/pnpecu-maxxecu-n54-pnp-kit-437-p.asp

Show More Show Less

Spool Performance Helix HPFP Overdrive Unit - N54

T#:1241393

Part#: SP-54HX-1

In Stock

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

Spool Performance is a top name in the BMW Forced Induction industry. Their team of young and intelligent engineers pair their passion for the industry with a rich education background, which results in a high-quality enthusiast-minded products. Spool Performance's state-of-the-art upgrades for your BMW fueling systems are a surefire way to make more power, reliably. The Helix from Spool is simply a planetary gearbox for your High-pressure fuel pump. The particular configuration of the gears and their spatial fixturing allows an axial increase in shaft speed from the input to the output of the unit. The N54/early n55 high-pressure pump is a very capable and over-engineered piece of hardware. They do a good job supplying fuel at high pressures at stock power levels. As we start tuning and pushing more power, we start seeing drops in the high pressure. What is happening here is that the high-pressure pump is not able pump as much fuel as the injectors are injecting into the cylinders and hence causing the rail pressures to drop. The pump at this point is running out of displacement volume. With a rotary pump like the continental HPFP, an easier way to increase displacement is to spin the pump faster which results in an increased number of delivery strokes per cycle. The Helix helps you do exactly this and thus helps overcome a big limitation in N54/early N55 fuel systems without the complexity of a secondary port injection system.

Show More Show Less

High Pressure Fuel Pump Replacement Kit

T#:5389771

Part#: N55HPFKKT

In Stock

$ 1,783.99

This product was last offered at the strikethrough price on
07-06-2026

$ 1,743.99 USD

Add to Wish List

Qty

$ 1,743.99 USD

Add to Wish List

HPFP woes? Replacement high pressure exchange pump for the N55 engine. Kit includes: Remanufactured High-pressure fuel pump Intake manifold gasket sets Throttle body gasket High pressure fuel sensor No core charge required!

Show More Show Less

High Performance Stainless Steel 10 Micron Inline Filter Unit ...

T#:2691345

Part#: SP-54-HXF10

Special Order: No Guaranteed ETA

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

The filter unit on the continental rotary high pressure fuel pumps perform an important function of final stage filtering of fine particle impurities before it reaches the hpfp pump chamber or worse, the injectors leading to leaky injectors. The problem with them is that they are extremely tiny and restrictive and sometimes even rupture failing to filter at all. The issue becomes worse when running high-performance products like the Spool Helix overdrive system because now you have an increased flow requirement through this filter that it just cannot keep up.

Show More Show Less

N54 High Pressure Fuel Pump Replacement Kit

T#:401622

Part#: 13517616446RKT1

Back Ordered

$ 1,808.99

This product was last offered at the strikethrough price on
06-19-2026

$ 1,807.99 USD

Add to Wish List

Qty

$ 1,807.99 USD

Add to Wish List

N54 HPFP failure is common with BMWs that use this powerplant. Our Packaged by Turner N54 High Pressure Fuel Pump Replacement Kit includes everything you need to replace your N54 HPFP.

Kit includes:

Genuine BMW Re-manufactured High pressure fuel pump
Intake manifold gasket sets
Throttle body gasket
Low pressure fuel sensor
High pressure fuel sensor

Show More Show Less

High Pressure Fuel Pump Kit

T#:5416773

Part#: N63S63HPFPKT

Ships in 3 Business Days

Sale - Save 7% $ 697.99

This product was last offered at the strikethrough price on
05-03-2026

$ 651.11 USD

Add to Wish List

Qty

Sale - Save 7%

$ 697.99

This product was last offered at the strikethrough price on
05-03-2026

$ 651.11 USD

Add to Wish List

Includes both fuel pumps and a new fuel pressure sensor. Solve your fuel delivery issues kit includes both fuel pumps and a new fuel pressure sensor and hardware.

Project Cars

SELECT YOUR BMW

BMW Fuel System Parts for BMW X Series E71 (2008-2014)

Sub-Categories

VTT N54 Vacuum Pump Block Off Plate

VTT BMW N54 “DI Injector” Delete Kit

Spool Performance Helix HPFP Overdrive Unit - N54

High Pressure Fuel Pump Replacement Kit

High Performance Stainless Steel 10 Micron Inline Filter Unit ...

N54 High Pressure Fuel Pump Replacement Kit

High Pressure Fuel Pump Kit

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results