BMW 1 Series E82 (2008-2013)

Upgrade your BMW's suspension with ECS Tuning Adjustable Sway Bar End Links, designed to provide up to 60mm (2.36") of adjustability. These end links allow you to eliminate sway bar preload or fine-tune it for specific racing needs and corner balancing. When installed, they improve drivetrain clearance and enhance sway bar responsiveness by reducing deflection, ensuring superior handling. Perfect for lowered vehicles using springs, coilovers, or air-ride suspension systems, these adjustable sway bar end links allow you to remove unwanted preload caused by changes in the center-to-center distance between sway bar mounting points. By adjusting the end links to a neutral position, you eliminate sway bar preload, enhancing suspension performance in various driving conditions.

The main body of the ECS Sway Bar End Links is crafted from strong, lightweight 6061-T6 billet aluminum and anodized red for superior corrosion resistance. Featuring left and right-hand threaded center sections and machined hex wrench fittings, these end links allow for quick and easy on-the-car adjustments. Zinc-plated hardware ensures secure and lasting adjustments, while the heavy-duty ball joint ends come with weather-resistant rubber boots and stainless steel wire retainers, providing superior protection against salt, rain, and ozone for extended durability. Each kit also includes zinc-plated Nyloc nuts and hardened steel washers for secure installation and improved contact surface on the sway bar.

These end links are designed, engineered, and rigorously tested by ECS Tuning to ensure the highest quality. Whether you have a lowered or stock suspension, these adjustable sway bar end links are the perfect upgrade, offering a high-quality, heavy-duty replacement that fits your specific needs.

Features:

Range of Adjustment: 255mm (10") to 315mm (12.4") 6061-T6 Billet Aluminum Construction: Red anodized for superior corrosion resistance Zinc-Plated Hardware: Provides durability and superior corrosion protection Right and Left-Hand Threaded Center Sections: Quick and simple on-the-car adjustments Heavy-Duty Ball Joints (M10x1.5): Weather-resistant rubber boots and stainless steel wire retainers for long-lasting durability NOTE: If you've modified your vehicle's suspension with aftermarket struts or coilovers, the mounting location for the sway bar end link may have moved. To confirm fitment with our adjustable end links, please measure the distance between the sway bar and the mounting location on the strut body with the vehicle at ride height and confirm that it is within the 255 mm - 315mm range of adjustment.

Over time, road grime, salt, and moisture take a toll on the factory rear leveling rod. The original equipment often corrodes, seizes, and eventually snaps—or worse, binds up and breaks your expensive headlight leveling sensor. With this issue in mind, ECS has engineered a heavy-duty, bulletproof solution designed to outlast the car it’s installed on.

Instead of brittle OE plastic that degrades and snaps over time, this rod is constructed from high-strength, flexible polyurethane. Paired with corrosion-resistant stainless steel ball studs, it guarantees smooth articulation and prevents the binding that destroys expensive sensors. Precision-manufactured for a perfect, bolt-on fit, this upgrade requires zero modifications to replace your fragile OEM unit.

This is a direct-fit replacement for Genuine BMW part number 37146752797, restoring proper suspension-to-sensor geometry so your headlights adjust perfectly to changing loads and road conditions.

Upgrading your cooling system or replacing old, brittle rubber hoses? Don't just replace them—upgrade them. This silicone coolant outlet hose from ECS Tuning delivers perfect OEM fitment with superior heat tolerance and a longer service life. Unlike standard rubber, which softens and degrades from constant heat cycles, high-grade silicone is built to last. Give your cooling system the reliability it deserves.

This hose connects the outlet on the thermostat housing to the front of the cylinder head. It replaces OEM BMW part number 11537584549.

Over time, road grime, salt, and moisture take a toll on the factory front headlight leveling sensor rod. The original equipment often corrodes, seizes, and eventually snaps—or worse, binds up and breaks your expensive headlight leveling sensor. With this issue in mind, ECS has engineered a heavy-duty, bulletproof solution designed to outlast the car it’s installed on.

To ensure compliance and long-term durability, flexible polyurethane material was chosen for constructing this replacement sensor rod. Paired with corrosion-resistant stainless steel ball studs, it guarantees smooth articulation and prevents the binding that destroys expensive sensors. Precision-manufactured for a perfect, bolt-on fit, this upgrade requires zero modifications to replace your fragile OEM unit.

This is a direct-fit replacement for Genuine BMW part number 37142283867, restoring proper suspension-to-sensor geometry so your headlights adjust perfectly to changing loads and road conditions.