BMW Intake Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis
One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

VRSF Chargepipe Upgrade Kit - N55
VRSF - Corporate Logo
T#:584877
Part#: 10901020A
In Stock
$149.99
Free Shipping
$149.99
Free Shipping
Reduce turbo lag and increase throttle response with a billet aluminum charge pipe from VRSF. The VRSF charge pipe maintains the OEM C-clip to provide a better seal over a conventional clamp/coupler design. Featuring CNC billet aluminum and a sharp black powder coated finish. This piece also includes two plugged methanol bungs for those who use or plan to use methanol/water injection.
Show More Show Less
Turbosmart BOV Kompact EM Dual Port VR9 - BMW N55 E/F Chassis
TurboSmart - Corporate Logo
T#:597194
Part#: TS-0223-1092
Ships by Jan 27, 2022
$242.99
$242.99
The award-winning Kompact EM series Blow-Off Valves, are the world’s first truly plug and play Blow-Off Valves. Simply unplug and unbolt your OEM Blow-Off Valve, and install Turbosmart's in its place. No adaptors, hoses, or extra assembly required. All this while retaining complete OE control of the BOV’s operation. Features: Dual Port VR9 Billet Construction in a Black Aluminum finish Compatible with BMW N55 powered E and F Chassis vehicles Dual Port design - Simultaneously vents back to the turbo inlet and the atmosphere at the same time Plug and plug upgrade Patent-pending integrated pressure control Reacts 57 times quicker than a blink of the eye Leak-free design Note: Not legal in California - Race Only For M2 and X4 M40i please refer to T#600064
Show More Show Less
Burger Motorsports Performance Intake - E82/88 135i, E9X 335i/xi, E84 X1 N55
Burger Motorsports - Corporate Logo
T#:556783
Part#: BMS-N55-INT
Ships by Feb 7, 2022
$219.00
Free Shipping

In BMW's with the N55, the intake system is partially limited. The bottom portion is lightweight and great for feeding cold air to the intake, but the top portion is excessively restrictive. Working with some of the original equipment, this intake continues to utilize the bottom portion of OE ducting and heat shielding, but replaces the top with new high flow ducting and a performance filter. Extensive testing showed up to a 10+ HP gain to the wheels and allows for quicker turbo spool speed. Plus, this design gives you a great sound improvement, letting you hear both the intake and turbo spooling!

Installation and removal is extremely quick and easy, taking only 5 minutes in the driveway!

Features:

  • Adds up to 10+ Horsepower
  • Dramatic sound improvement
  • Super fast install and removal
  • Improves throttle response 
  • Retains OEM airbox base as a heat shield
  • Retains OEM cold air ducting
  • Looks great under the hood
  • Cleanable and reusable filter
  • Made in the USA
Show More Show Less

Burger Motorsports Red Dual Cone Intake (DCI) - N54 135/335/535, Z4 35i
Burger Motorsports - Corporate Logo
T#:556765
Part#: BMS-N54-DCI-R
In Stock
$99.00
Free Shipping

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

Show More Show Less

Turner Motorsport N52 Silicone Intake Boot - Black - E8x 128i, E9x 325, 328, 330
Turner Motorsport - Corporate Logo
T#:400812
Part#: 006655TMS01
In Stock
Sale - Save 15% $75.95
$64.56
Free Shipping on orders $49 and up
Sale - Save 15% $75.95
$64.56
Free Shipping on orders $49 and up

The intake boot is a regular issue especially for BMW's, nearly all vehicles have a boot manufactured from rubber with an accordion section in the design for flexibility. This flexible section is typically where the failure comes from, leading to vacuum leak engine codes, rough idle, and increase fuel consumption. 

When you upgrade to a Turner silicone intake boot you get a perfect fit that will not only outlast the OE design (meaning any vacuum leaks and rough idle), while also smoothing out airflow within the intake tract. This boot also eliminates the factory intake resonator giving your engine a much more aggressive sound under the hood especially at higher rpm. Available in black or Turner blue color, our intake boot offers either a pop of color or a cohesive, complementary look in your engine bay.

The Turner Motorsport silicone intake boot is manufactured with 5 layers of wire reinforced silicone to prevent collapse under load. Engineered in-house utilizing 3D scanning technology, this boot offers perfect fitment with the factory air box and either single stage or three stage (high output N52) intake manifolds.

Install as a standalone reliability improvement or in addition to our three stage intake manifold and Turner performance tune (available here).

Replaces OE intake boot 13717536004.

Features:

  • 5 layers of wire reinforced silicone
  • Perfect fitment with factory airbox
  • Compatible with single stage or three stage manifold
  • Installation hardware included

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i Coupe Convertible
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi - Coupe
2007-2013 E93 BMW 328i - Convertible

Show More Show Less
Burger Motorsports Blue Dual Cone Intake (DCI) - N54 135/335/535, Z4 35i
Burger Motorsports - Corporate Logo
T#:556768
Part#: BMS-N54-DCI-B
In Stock
$109.00
Free Shipping

An easy way to improve the performance of your N54 powered BMW is by removing the stock air box and swapping in this Dual Cone Intake "DCI" from Burger Motorsports. Featuring two S&B inverted cone filters with adapter couplers and new hardware, these easily install into the stock box location, allowing for greatly improved intake air flow. This is great for both stock and modified vehicles, as this allows for greater air flow at all RPMs and removes the air restriction that would normally rob your engine of power.

In addition to increased power, these filters give your engine a more aggressive appearance and sound that any automotive enthusiast will appreciate.

MADE IN THE USA

**CARB Approved Under Executive Order (EO) No. D-744-2 for all 2007-2012 BMW models equipped with the N54 3.0L twin-turbocharged 6-cylinder engine.**

Show More Show Less