BMW 1 Series E82 (2008-2013)

Seat Floor Adapters - E82, E90, E92 - Macht Schnell

T#:22151

Part#: TMS22151

Ships on Sep 24, 2026

$ 235.00 USD

Add to Wish List

Qty

$ 235.00 USD

Add to Wish List

In order to mount aftermarket seats in your car, you need a floor mount adapter. These high-quality aluminum adapters are made by Macht Schnell. These bolt to your existing seat mounting studs in the floor and offer the lowest profile of any floor mount (22mm height). This helps to keep your seat at the lowest position possible. Your seat adapters or sliders bolt to this adapter plate. These floor mounts are a matrix style with rows of threaded holes that allow you to find an ideal seat location. There are other options - including homemade - but these seat brackets for your BMW are the highest quality to match your expensive seats.

Sold per seat. Can be used on left or ride sides of vehicle.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe

Show More Show Less

E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum F...

T#:2801

Part#: 520-200-240

In Stock

$ 714.00 USD

Add to Wish List

Qty

$ 714.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

Stock Flywheel Weight = 24-31.0lbs
JB Flywheel Weight = 12.0lbs

This item fits the following BMWs:
2006-2010 E60 BMW - 525i, 528i, 530i
2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
2007-2013 E82 BMW - 125i, 128i
2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
2009-later E89 BMW - Z4 3.0i

Show More Show Less

BMC Filter Cleaning Kit

T#:590913

Part#: WA250-500

In Stock

$ 24.99 USD

Add to Wish List

Qty

$ 24.99 USD

Add to Wish List

1 SERIESCHROME PROJECTOR HEADLIGHT

T#:20946739

Part#: 2LHPE8708TM

Ships in 6 Business Days

$ 322.99 USD

Add to Wish List

Qty

$ 322.99 USD

Add to Wish List

Features Include: Brand new in original box New Euro-style LED strips for the European look! Matte Black Housing - Clear lens dual halo projector headlights with LED light strip Made by an ISO-certified manufacturer using materials that meet strict OEM requirements

Show More Show Less

Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M ...

T#:4648679

Part#: 69.10.100

Ships in 9 Business Days

$ 289.00 USD

Add to Wish List

Qty

$ 289.00 USD

Add to Wish List

Macht Schnell's aluminum bushing kit will breathe new life into aging 1M's and M3's, affixing the car's rear subframe and differential to the chassis. Rubber subframe bushings in the E9x M3 and E82 1M from the factory are soft, and yield under hard driving resulting in ever-changing suspension geometry and alignment specs. By limiting the movement of both the car's subframe and differential, these solid bushings will give the rear of the car a tremendously planted and confident feel.

Show More Show Less

BMW E82 E88 Halo Projector Headlight Chrome Housing

T#:20946738

Part#: 2LHPE8708JMTM

In Stock

$ 282.99 USD

Add to Wish List

Qty

$ 282.99 USD

Add to Wish List

Features Include: Brand new in original box New Euro-style LED strips for the European look! Matte Black Housing - Clear lens dual halo projector headlights with LED light strip Made by an ISO-certified manufacturer using materials that meet strict OEM requirements

Show More Show Less

Akrapovic Slip-On Titanium Exhaust System - E82 1M Coupe

T#:340330

Part#: TMS4781

Ships in 8 Business Days

Starting at $ 5,403.80 USD

Add to Wish List

Starting at $ 5,403.80 USD

Add to Wish List

According to BMW the 1 Series M Coupe is a "predator on the prowl", why not give it some GROWL with the Akrapovic slip-on exhaust system.

This slip-on muffler is an "axle back" system that is mounted on the MotoGP 1M Coupe Safety Car and now is available for street going 1M Coupes. The Akrapovic Slip-On Titanium exhaust system for the BMW 1M Coupe is designed for drivers who demand more power and less weight. In addition to a weight reduction and a power gain, one of the tasks of the Akrapovic team was also to make the sound of the 1M Coupe become music to ones ears. An optional wireless "dualmode" exhaust flap control allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, when the exhaust flap is opened the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car.

Not for sale outside the US or Canada.

This item fits the following BMWs:
2011+ E82 BMW 1M Coupe

Show More Show Less

BMC Performance Air Filter - E90, E91, E92, E93, E89, E60, E61 ...

T#:398689

Part#: FB494/20

In Stock at Vendor

$ 100.99 USD

Add to Wish List

Qty

$ 100.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

BMC Performance Air Filter - E90, E91, E92, E93, E84

T#:398704

Part#: FB630/20

In Stock at Vendor

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

Macht Schnell Ashtray Gauge Panel - E82

T#:4648663

Part#: 50.10.020

Ships in 6 Business Days

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

Macht Schnell's gauge panel is designed to be a direct replacement for the stock ashtray in the E82. This panel mounts using factory ashtray mounting holes and no unnecessary modification is required. The textured plastic is composed of ABS plastic that resists warping or bending in high heat and feels similar in touch to OEM. *Please contact us for custom painting options. Designed for 52mm gauges.

Show More Show Less

Seatbelt 4-point Race Harness Receptacles - Macht Schnell

T#:338505

Part#: 79.12.15X

Ships on Sep 29, 2026

Starting at $ 125.00 USD

Add to Wish List

Starting at $ 125.00 USD

Add to Wish List

If you're going to use a 4 point racing harness with your racing or sport seat and don't want to drill through your floor and carpet, these harness adapter plates are perfect*. These sandwich in between your slider and seat bracket for a strong and secure mounting point. They are made from high-strength steel and powedercoated in stealthy black. Choose from a bolt-in or clip-in style harness end. These will only work with the Macht Schnell floor mounts.

* - note that most racing harness manufacturers will advise that drilling through the floor is the best method for mounting harnesses. This allows you to locate the mount in the ideal location and angle to fit your driving position. The proper installation is paramount to ensure the harness works correctly in an impact.

Sold per seat.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

BMC Performance Air Filter - E82/8 E9X N52

T#:397417

Part#: FB518/08

Back Ordered

$ 83.99 USD

Add to Wish List

Qty

$ 83.99 USD

Add to Wish List

Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.

Show More Show Less

AP Racing By Essex Radi-CAL ENP Competition Brake Kit (Front 9668/372...

T#:57086655

Part#: 13.01.10038

Ships in 10 Business Days

$ 6,687.99

This product was last offered at the strikethrough price on
08-26-2026

$ 6,199.00 USD

Add to Wish List

Qty

$ 6,199.00 USD

Add to Wish List

Electroless Nickel Plated Front Competition Brake Kit

AP Racing By Essex Radi-CAL ENP Competition Brake Kit (Rear 9449/340m...

T#:57086656

Part#: 13.01.10053

Ships in 10 Business Days

$ 5,447.99

This product was last offered at the strikethrough price on
08-26-2026

$ 5,049.00 USD

Add to Wish List

Qty

$ 5,049.00 USD

Add to Wish List

Electroless Nickel Plated Rear Competition Brake Kit

Seatbelt 6-point Race Harness Receptacles - Macht Schnell

T#:338507

Part#: 79.20.150K

Ships on Sep 29, 2026

Starting at $ 174.00 USD

Add to Wish List

Starting at $ 174.00 USD

Add to Wish List

Many racing series and event organizers are requiring 5 or 6-point harnesses in their events now. Attaching the anchor points to the seat base is a desired alternative to drilling holes in your floor and carpet*. This set includes the 6-point anchor to attach to the Macht Schnell floor mount as well as side attachments for either a bolt-in or snap-in harness.

* - note that most racing harness manufacturers will advise that drilling through the floor is the best method for mounting harnesses. This allows you to locate the mount in the ideal location and angle to fit your driving position. The proper installation is paramount to ensure the harness works correctly in an impact.

Sold per seat.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Show More Show Less

Project Cars

SELECT YOUR BMW

Sub-Categories

Seat Floor Adapters - E82, E90, E92 - Macht Schnell

E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum F...

BMC Filter Cleaning Kit

1 SERIESCHROME PROJECTOR HEADLIGHT

Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M ...

BMW E82 E88 Halo Projector Headlight Chrome Housing

Akrapovic Slip-On Titanium Exhaust System - E82 1M Coupe

BMC Performance Air Filter - E90, E91, E92, E93, E89, E60, E61 ...

BMC Performance Air Filter - E90, E91, E92, E93, E84

Macht Schnell Ashtray Gauge Panel - E82

Seatbelt 4-point Race Harness Receptacles - Macht Schnell

BMC Performance Air Filter - E82/8 E9X N52

AP Racing By Essex Radi-CAL ENP Competition Brake Kit (Front 9668/372...

AP Racing By Essex Radi-CAL ENP Competition Brake Kit (Rear 9449/340m...

Seatbelt 6-point Race Harness Receptacles - Macht Schnell

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results