BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

Rogue Engineering - Corporate Logo
T#:641617
Part#: TM
In Stock
$ 69.00 USD
Free Shipping
$ 69.00 USD
Free Shipping
Unlike other aftermarket mounts, the mounting plate and studs of our mounts have been Zinc-plated to prevent corrosion. Rogue Engineering Transmission Mounts are sold as a pair, and come with Grade 8 Zinc plated hardware. Rogue Engineering transmission mounts are designed with street comfort in mind while still reducing left and right movement of the transmission. By using a cylindrical shape instead of the factory hourglass like design and utilizing Neoprene rubber deflection can be significantly reduced, minimizing unwanted transmission movement while maintaining vibration dampening characteristics.
Show More Show Less
Rogue Engineering - Corporate Logo
T#:27105150
Part#: RE.061
In Stock
$ 119.00 USD
Free Shipping
$ 119.00 USD
Free Shipping
You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.
Show More Show Less
Carbonio No-Drill Front License Plate Mount - North America - Most BM...
For vehicles with Adaptive Cruise Control and M Sport Package
Carbonio - Corporate Logo
T#:599470
Part#: LPM-BMC0136-N
In Stock
$ 139.99 USD
Free Shipping
$ 139.99 USD
Free Shipping
Fitting a front license plate to a BMW requires drilling damaging holes forever ruining the original front bumper. Until now, the only other option was to fit an offset mount to the side using the factory tow hook. Carbonio has now engineered an OEM quality solution that mounts the license plate in the middle while doing no damage of any kind. Installation and removal is a 10-second exercise and the unit is totally self-contained, not requiring any pieces to be fixed to the car. FEATURES NO-DRILL, NO-HOLES, NO-ADHESIVES OR TAPES Easy 10-second-on 10-second-off installation Fully tunable design allows for adjustment of license plate angle and distance forwards / backwards / upwards / downwards Allows for multiple plate mounting location options Great for car shows or track sessions when you want to quickly remove your front plate Soft material on contact surfaces protects grille Strong formed plate support accepts USA and Rest of World (ROW) license plates; a truly global solution Black powder coating offers clean OEM look and long-lasting finish High-speed tested & does not interfere with vehicle cooling, parking sensors, or front cameras Can be used with most license plate frames and clear/colored plate covers and protectors Meets all known international license plate display and mounting laws Unit is shipped pre-assembled with all hardware and is ready to mount out of the box KIT INCLUDES Pre-assembled license plate mount with adjustment tool Complete photographic installation instructions
Show More Show Less

JB Racing - Corporate Logo
T#:2801
Part#: 520-200-240
In Stock
$ 714.00 USD
Free Shipping
$ 714.00 USD
Free Shipping
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

Stock Flywheel Weight = 24-31.0lbs
JB Flywheel Weight = 12.0lbs

This item fits the following BMWs:
2006-2010 E60 BMW - 525i, 528i, 530i
2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
2007-2013 E82 BMW - 125i, 128i
2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
2009-later E89 BMW - Z4 3.0i
Show More Show Less

Griot's - Corporate Logo
T#:2119669
Part#: 51185
In Stock
$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping
Create rich, clinging foam for efficient removal of shine-stealing abrasives and grime, while effortlessly creating lasting gloss and protection via your pressure washer.
Active Autowerke - Corporate Logo
T#:590914
Part#: AASIGNATUREPLAQU
Ships in 4 Business Days
4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
4% off MSRP
$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD
Free Shipping
Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!
Show More Show Less

Active Autowerke - Corporate Logo
T#:4416
Part#: AABOVKIT-N54
In Stock
$ 565.99

This product was last offered at the strikethrough price on
09-01-2026

$ 529.99 USD
Limited Qty Sale
Free Shipping
$ 565.99

This product was last offered at the strikethrough price on
09-01-2026

$ 529.99 USD
Limited Qty Sale
Free Shipping
As Used on Project E92 335i
When adding boost to the N54 engine, it's important to consider effects throughout the rest of the system. Additional boost can overwhelm the stock BMW diverter valve system and lead to boost leakage, or boost spikes, and lost horsepower. With the factory components in place it's hard to maintain consistently high boost levels. Instead of the weak plastic components of the stock system, Active Autowerke uses a CNC-machined and mandrel-bent aluminum tube with a Venturi blow-off valve in place of the original diverter valves. The blow-off valve dumps overboost into the atmosphere for that distinctive turbo 'whoosh' sound. The single AA BOV is over-sized for the N54 application - taking the place of the two small diverter valves, and verified to handle over 600hp. With the BOV acting properly your turbos and other components are protected from compressor surge caused by excess pressure build-up.

We like the Active BOV better than other forms of diverter and BOV kits because it's tried and true - AA was the original turbo BMW tuners and their experience is second to none. That's why they took the time to engineer their kit to fit perfectly, using the OE-type connector to the throttle body, and high-strength silicone to the lower intercooler tube. Each connection is a tight, leak-free seal. The kit comes complete with the discharge tube, vacuum plugs for the stock hoses, and instructions. The tube is powdercoated in black and with a wrinkle finish for an OE appearance.

This item fits the following BMWs with N54 engine:
2008-2010 E82 BMW 135i 1M
2007-2010 E90 BMW 335i 335xi 335i xDrive
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive
2007-2010 E93 BMW 335i
Show More Show Less
Akrapovic - Corporate Logo
T#:340330
Part#: TMS4781
Ships in 6 Business Days
Starting at $ 5,403.80 USD
Free Shipping
Starting at $ 5,403.80 USD
Free Shipping
According to BMW the 1 Series M Coupe is a "predator on the prowl", why not give it some GROWL with the Akrapovic slip-on exhaust system.

This slip-on muffler is an "axle back" system that is mounted on the MotoGP 1M Coupe Safety Car and now is available for street going 1M Coupes. The Akrapovic Slip-On Titanium exhaust system for the BMW 1M Coupe is designed for drivers who demand more power and less weight. In addition to a weight reduction and a power gain, one of the tasks of the Akrapovic team was also to make the sound of the 1M Coupe become music to ones ears. An optional wireless "dualmode" exhaust flap control allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, when the exhaust flap is opened the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car.

Not for sale outside the US or Canada.

This item fits the following BMWs:
2011+ E82 BMW 1M Coupe
Show More Show Less

BMC - Corporate Logo
T#:398689
Part#: FB494/20
In Stock at Vendor
$ 100.99 USD
Free Shipping
$ 100.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less

Active Autowerke - Corporate Logo
T#:397308
Part#: 15-011
Ships in 4 Business Days
$ 32.99 USD
Free Shipping
$ 32.99 USD
Free Shipping
Includes Recharge Oil (8 oz.) and Cleaner Spray (12 oz.). The recharge oil traps the smallest dirt particles, ensuring your engine is breathing clean air. The oil creates a positive magnetic charge with the filter's stainless steel mesh. This positive charge attracts negatively charged dust particles entering the filter, clearing them off the cotton and allowing for maximum airflow. The oil also contains a swelling additive for the cotton filtration media - this allows filtration media to collect small dirt particles that could harm your engine.
Show More Show Less
Sunex - Corporate Logo
T#:641915
Part#: 8845D
Ships in 7 Business Days
$ 141.99 USD
Free Shipping
$ 141.99 USD
Free Shipping
Complete set of spark plug sockets.
Active Autowerke - Corporate Logo
T#:341887
Part#: 135N55CP-KIT
Ships in 4 Business Days
$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping


BMC - Corporate Logo
T#:398704
Part#: FB630/20
In Stock at Vendor
$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
Rogue Engineering - Corporate Logo
T#:553830
Part#: RE.E9X.TA.M3
Ships in 9 Business Days
$ 289.00 USD
Free Shipping
$ 289.00 USD
Free Shipping

When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear. 

Features:

  • 100% machined and anodized, 6061-T6 lightweight aluminum arms
  • High-strength, 3-piece, rod end (with carbon fiber reinforced, PTFE race) offers longer life for street compared to standard rod ends
  • SEALS-IT Rod end seals keep dirt, water, and other contaminants out
  • Rod ends feature grease fittings, to allow for rod end serviceability.
  • Lighter than stock!  (Stock is 875g, RE arms are 640g)
  • Extremely easy installation and adjustment (your alignment shop will LOVE you!)
Show More Show Less
Active Autowerke - Corporate Logo
T#:340366
Part#: N55CP-KIT
Ships in 3 Business Days
Starting at $ 189.99 USD
Free Shipping
Starting at $ 189.99 USD
Free Shipping
One major weak point in the N55 turbo plumbing is the stock upper chargepipe from the intercooler outlet to the intake manifold. The original N55 charge pipe is made from a weak plastic and can fail with even stock boost levels. The most common problem is a crack that develops along a seam where the pipe connects to the throttle body. Any crack here is bad as it creates a massive vacuum leak and the engine electronics will put the car into limp mode. If you don't want to be sidelined there is a very simple fix - the Active Autowerke N55 charge pipe.

This aluminum pipe is much stronger and more durable and nearly indestructable for the N55 application. It uses a CNC-machined factory-style connection and o-ring to the throttle body to ensure a tight and leak-free seal. The piping is a consistent 3" diameter for better flow and an improved throttle response. AA has included a raised boss with two ports should you choose to add a water/meth injection system later. The factory MAP sensor installs in the same location and the pipe is powdercoated black for a factory-type appearance.

With a stronger pipe you don't have to worry about the infamous chargepipe crack and lost boost levels and horsepower. All of the boost in the world is useless if it's leaking so using beefed up components in place of the weak factory pieces is the smart way to consistently high power output.

This item fits the following BMWs with the N55 engine:
2011-2012 E82 BMW 135i
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2011-2013 E93 BMW 335i - Convertible
Show More Show Less

Active Autowerke - Corporate Logo
T#:388675
Part#: 340366TCKD4AMN6T
Ships in 4 Business Days
$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping

Griot's - Corporate Logo
T#:2181291
Part#: 10983
In Stock
$ 84.99 USD
Free Shipping
$ 84.99 USD
Free Shipping
Griot's customers asked for a Griot's Garage ceramic... here it is. We've stepped up to create, formulate, and manufacture our own
Griot's - Corporate Logo
T#:641197
Part#: 10908
Ships in 9 Business Days
$ 144.99 USD
Free Shipping
$ 144.99 USD
Free Shipping
The ALL-NEW G8 Mini Random Orbital Polisher has been engineered from the ground up to deliver the agility, power, and precision needed

Griot's - Corporate Logo
T#:2498338
Part#: B110G
Ships in 9 Business Days
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
Utilizing high loads of sub-micron abrasives, BOSS Fast Correcting Cream quickly removes severe defects while adding depth and clarity.
Griot's - Corporate Logo
T#:2181292
Part#: 10915
Ships in 9 Business Days
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping
Designed to perfection, the G15 has the power, pad rotation, and control to take your paint correcting to the next level.

Griot's - Corporate Logo
T#:580483
Part#: BF302
Ships in 9 Business Days
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
Meet the ultimate foam delivery system. In mere seconds THE BOSS Foam Cannon can blanket your car in rich, cleansing foam.

Griot's - Corporate Logo
T#:2135097
Part#: 10901
Ships in 9 Business Days
$ 179.99 USD
Free Shipping
$ 179.99 USD
Free Shipping
At every turn the feature-rich G9 has the precise attention to detail... the nuance that makes great tools great.
Griot's - Corporate Logo
T#:641192
Part#: 10986
Ships in 9 Business Days
$ 64.99 USD
Free Shipping
$ 64.99 USD
Free Shipping
The World's best spray detailer now with SiO2 protection. It features an exclusive blend of advanced silane polymer technology combined with SiO2 to maintain an ultra-slick, insane- gloss finish in between more significant washing and protection processes
Show More Show Less
Griot's - Corporate Logo
T#:2958758
Part#: B3203KT
Ships in 9 Business Days
$ 166.99 USD
Free Shipping
$ 166.99 USD
Free Shipping
The Brilliant Finish Foaming System is our top tier safest cleaning method period... and you'll get a kick out of washing your car with it.


Griot's - Corporate Logo
T#:4224041
Part#: 10913
Ships in 9 Business Days
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Undeniably, the most comfortable, powerful, and capable mini polisher available for efficient and professional-grade paint correction.
Sunex - Corporate Logo
T#:5282862
Part#: 2850
Back Ordered
11% off MSRP $ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
11% off MSRP
$ 135.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 119.99 USD
Free Shipping
Easily removes vacuum switches, oil pressure sending units, brake light switches, and oxygen sensors on most car models
Sunex - Corporate Logo
T#:642035
Part#: 9914A
Ships on Sep 29, 2026
$ 113.91 USD
Free Shipping
$ 113.91 USD
Free Shipping
Radius V-Groove design creates an anti-slip while also preventing round-off.

Rogue Engineering - Corporate Logo
T#:553834
Part#: RE.E9X.TA
Back Ordered
$ 339.00 USD
Free Shipping
$ 339.00 USD
Free Shipping

Updated design!  Now shipping!

When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear. 

Features:

100% machined and anodized, 6061-T6 lightweight aluminum arms (and collars).

Stainless hardware and spacers are perfect for the tough Northeast climate!

New!  Easy adjustment with 22mm open ended wrench and 5mm allen key!  It only requires 15 ft. lbs. on the clamp to secure the clamp!

New!  Included lock-out kit, replaces factory eccentric hardware.

Updated 3-piece rod ends features 4130 chromoly steel bodies, heat-treated, alloy steel races, and Teflon liners

Extremely easy installation and adjustment (your alignment shop will LOVE you!)

Show More Show Less

BMC - Corporate Logo
T#:397417
Part#: FB518/08
Back Ordered
$ 83.99 USD
Free Shipping
$ 83.99 USD
Free Shipping
Looking to upgrade your air filter for increased flow and performance? BMC filter allow significantly higher air flow and are perfectly molded in one piece to fit exactly the same as your stock air filter. These filters are constructed from multi-layerd cotton gauze that is pre-oiled and can be cleaned and regenerated using the BMC regeneration kit.
Show More Show Less
APR Valve Stem Caps - Set Of 4 - Silver
Call In Or Chat For Best Price!
APR - Corporate Logo
T#:31125602
Part#: MS100178
In Stock
11% off MSRP $ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping
11% off MSRP
$ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping

APR Valve Stem Caps - Set Of 4 - Silver are a stylish and functional upgrade for any vehicle. This set includes four high-quality aluminum valve stem caps, each engraved with the distinctive APR logo. These caps are designed to enhance the appearance of your wheels while providing durability and reliability.

  • Stylish Appearance: Each cap features a sleek silver finish and an engraved APR logo, adding a touch of elegance to your vehicle.
  • Durable Construction: Made from high-quality aluminum, these valve stem caps are built to withstand harsh conditions and resist corrosion.
  • Easy Installation: Simple to install and compatible with most standard valve stems.
  • Enhanced Wheel Aesthetics: Upgrades the look of your wheels with a subtle yet impactful design.
  • Functional Protection: Helps protect valve stems from dirt and moisture, ensuring consistent performance.

This set of valve stem caps is an excellent choice for anyone looking to add a refined touch to their vehicle's wheels.

Show More Show Less

APR Valve Stem Caps - Set Of 4 - Gunmetal
Call In Or Chat For Best Price!
APR - Corporate Logo
T#:31092523
Part#: MS100179
In Stock
11% off MSRP $ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping
11% off MSRP
$ 17.94

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.95 USD
Free Shipping

APR Valve Stem Caps - Set Of 4 - Gunmetal offer a stylish and functional upgrade for any vehicle. These high-quality aluminum valve stem caps come in a sleek gunmetal finish and feature an engraved APR logo, which adds a touch of sophistication to your wheels.

  • Material: Made from durable aluminum for long-lasting performance
  • Design: Engraved APR logo adds a distinctive look
  • Finish: Gunmetal color enhances the visual appeal of your wheels
  • Set Includes: 4 valve stem caps for a complete upgrade
  • Compatibility: Fits most standard valve stems

These APR Valve Stem Caps are designed to provide both aesthetics and durability, making them a great choice for enhancing your vehicle's style.

Show More Show Less
Griot's - Corporate Logo
T#:2181293
Part#: 10921
Ships in 9 Business Days
$ 259.99 USD
Free Shipping
$ 259.99 USD
Free Shipping
Need professional-grade paint correction? The feature-packed G21 is the most capable paint perfecting tool we’ve ever created.

Active Autowerke - Corporate Logo
T#:57616348
Part#: RTF-1L
Ships in 4 Business Days
New Item
$ 240.00 USD
Free Shipping
$ 240.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).
Show More Show Less

Griot's - Corporate Logo
T#:2958761
Part#: 11029KT
Ships in 9 Business Days
$ 81.99 USD
Free Shipping
$ 81.99 USD
Free Shipping
Pairing the proper car care with the correct tools is key to making your detailing sessions an enjoyable experience and this kit has
Griot's - Corporate Logo
T#:2438628
Part#: B8000
Ships in 9 Business Days
$ 69.99 USD
Free Shipping
$ 69.99 USD
Free Shipping
This versatile LED light is a superior paint evaluation tool and a great all-around work light.
Griot's - Corporate Logo
T#:2498378
Part#: 10964
Ships in 9 Business Days
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
3-in-1 lotion and formulated it as a convenient spray. Enjoy clean, conditioned, and protected


Griot's - Corporate Logo
T#:2438619
Part#: B3301
Ships in 9 Business Days
$ 71.99 USD
Free Shipping
$ 71.99 USD
Free Shipping
Add hydrophobic protection and get more miles out of your shine
Griot's - Corporate Logo
T#:2958756
Part#: 10970KT
Ships in 9 Business Days
$ 96.99 USD
Free Shipping
$ 96.99 USD
Free Shipping
This kit is perfect to get any first-timer started, or an easy way for long-time customers to stock up on their favorite car care
Sunex - Corporate Logo
T#:2528142
Part#: SX113D
Ships on Sep 29, 2026
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
With great comfort and design the air ratchet wrench is the perfect tool

Sunex - Corporate Logo
T#:2750699
Part#: 9914MA
Ships on Sep 29, 2026
$ 107.39 USD
Free Shipping
$ 107.39 USD
Free Shipping
Fully polished drop forged CR-V alloy steel for maximum strength and service life

Sunex - Corporate Logo
T#:5229429
Part#: 910MTAS
Ships on Sep 29, 2026
$ 154.99 USD
Free Shipping
$ 154.99 USD
Free Shipping
Used with a torque wrench to access obstructed fasteners
Sunex - Corporate Logo
T#:2498418
Part#: 3911D
Ships on Sep 29, 2026
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
This set covers 8 different functions