CNC Billet License Plate Bracket

T#:27105150

Part#: RE.061

Ships in 8 Business Days

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

You are looking at the BEST license plate bracket for your BMW, price no object! We never understood why BMW would put a cheap, plastic bracket on the back of a BMW to hold a license plate. The screws holding the bracket on would rust, the steel inserts hold the plate on would also rust, causing the hardware holding the plate on to seize or just no longer function. Our bracket fits any BMW that mounts license plates in the rear that use factory part number 51-18-8-238-061. Fits most BMWs produced AFTER 1999. If your vehicle does not use the plastic plate, it will not fit. Does not fit E46 touring (wagon). PROBLEMS with the factory bracket and hardware The screws that secure the plastic bracket are plated steel and will corrode over time. These two screw would normally not be seen since it is under the license plate, but it is holding the bracket onto the trunk. The four (4) nutserts that are pressed into the plastic frame (to hold the license plate) are also steel and will eventually seize with the bolt and just spin in the plastic frame becoming useless. The plastic frame itself is flimsy, doing a near minimal task of holding on the license plate. The hardware securing the plate to the bracket will rust, seizing to the nutsert or even spinning in place becoming completely useless. SOLUTION Create a more robust bracket that would not only be stiffer but also more corrosion resistant; CNC’d aluminum with an anodized finish. We machine a near identical plate, matching factory dimensions, from 1/2" plate of aluminum. Instead of nutserts pressed into plastic, map the correct position and machine the threads for the hardware directly into the plate. The hardware used to secure the new bracket to the trunk would be made from stainless steel (or optional corrosion-proof titanium) The hardware used to secure the license plate to the newly engineered bracket would also be stainless steel (or optional made from titanium) Kit Includes: One (1) Rogue Engineering designed and manufactured CNC'd aluminum license plate bracket Two (2) Stainless screws to secure bracket to trunk. Four (4) stainless screws to secure license plate to bracket.

Show More Show Less

Autotecknic Gloss Black Front Kidney Grille Set - E82/E88 1-series & ...

T#:21374156

Part#: ATK-BM-0200-GB

In Stock

$ 85.00 USD

Add to Wish List

Qty

$ 85.00 USD

Add to Wish List

Just like every other Autotecknic product, this gloss black front grille has been manufactured to the highest quality with the outer ring and every slat finished individually for your convenience and perfect fit and finish! Package includes one pair of passenger and driver side direct OEM replacement front grilles.

Show More Show Less

Autotecknic Replacement Carbon Fiber Mirror Covers - BMW E90/ E92/ E9...

T#:21472876

Part#: ATK-BM-0152-P

In Stock

Sale - Save 5% $ 300.00

This product was last offered at the strikethrough price on
05-15-2026

$ 283.70 USD

Add to Wish List

Qty

Sale - Save 5%

$ 300.00

This product was last offered at the strikethrough price on
05-15-2026

$ 283.70 USD

Add to Wish List

Carbon Fiber replacement mirror covers by Autotecknic for the E9x 3-series and E82 1M. Designed for a seamless OEM fit. Great for lost, damaged, or worn mirror covers and people just looking to upgrade! Composed of carbon fiber with a glossy finish! Includes one pair of full replacement mirror covers (one driver side, one passenger side) Made from 100% non-recycled plastic with carbon fiber overlay Compatible with the following BMW models: E90/ E92/ E93 M3 | E82 1M Designed and assembled in the USA

Show More Show Less

Black Center Grills - E82 128i 135i

T#:371998

Part#: BM01-8201-B

In Stock

$ 85.00 USD

Add to Wish List

Qty

$ 85.00 USD

Add to Wish List

Turner Motorsport Direct Replacement Center Grilles for BMW

Upgrade your BMW's front end with Turner Motorsport's Direct Replacement Center Grilles. This kit replaces the stock chrome kidney/center grilles, delivering a bold and aggressive appearance. Included are two black grills and two hood trims for a comprehensive transformation.

Key Benefits:

Direct replacement for stock chrome grilles
Aggressive aesthetic enhancement
Made from impact-resistant, long-life ABS polymer
Precision-crafted for a perfect OEM fit
High-quality matte finish resembling genuine BMW parts

Crafted from durable ABS polymer, these black grilles not only provide impact resistance but also ensure a long-lasting upgrade. The precision engineering guarantees an OEM fit, while the high-quality matte finish perfectly complements the authentic BMW look.

Show More Show Less

Autoteknic Universal Carbon Fiber Splitter

T#:396026

Part#: UN-0001-CF

Ships in 7 Business Days

$ 149.99 USD

Add to Wish List

Qty

$ 149.99 USD

Add to Wish List

AutoTecknic Universal Carbon Fiber Splitter

The AutoTecknic universal carbon fiber splitter offers an upgraded front-end aesthetic for your vehicle. Crafted with 3K plain weave carbon fiber and a UV clear coat, these splitters boast a lustrous mirror shine finish. Compatible with various bumpers upon proper installation, they deliver:

Made from 3K plain weave carbon fiber with a UV clear coat finish
Compatibility with various bumpers with appropriate installation
Pre-installation drilling for mounting holes required
Vehicle-specific installation hardware not included
Provides a sporty appearance without excessive aggressiveness
Shields the bumper against speed bumps and road dips
Enhances the overall vehicle appearance while ensuring protection

Designed for those seeking a subtle yet sporty visual enhancement, these splitters safeguard your bumper while boosting your car's aesthetics. Recommended by numerous customers for both its visual appeal and functional benefits.

Package Contents: One set of AutoTecknic universal carbon fiber splitters.

Splitter Dimensions: 21" (Length) x 10" (Depth) x 5" (Width)

Show More Show Less

AutoTecknic Replacement Version II Dry Carbon Mirror Covers - E9X M3 ...

T#:38857244

Part#: BM-0152-DCG-P

In Stock

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

These version II dry carbon mirror covers weigh only 121 grams, VS the version I ABS overlay at 239 grams on each side; that’s almost half the weight shaved! Other than the mounting clips, it's made of 100% carbon fiber, lighter in weight, and high tensile strength than our ABS overlaid version.

Show More Show Less

AutoTecknic Gloss Black Mirror Cover Set - E90/ E92/ E93 M3 | E82 1M ...

T#:38857241

Part#: BM-0152-GB

In Stock

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

Elevate the style of your BMW E90/ E92/ E93 M3 or E82 1M with the AutoTecknic Gloss Black Mirror Cover Set, featuring a bold, sleek finish and a flawless fit.

AUTOTECKNIC Carbon Fiber Front Grille Set - E82/ E88 - Pre LCI ...

T#:21176907

Part#: ATK-BM-0201

Ships in 7 Business Days

$ 195.00 USD

Add to Wish List

Qty

$ 195.00 USD

Add to Wish List

With quality in mind, the folks at AUTOTECKNIC have created the perfect grille upgrade for your E82/E88. Created from high-strength recycled plastic and high-quality carbon fiber, with each slat and the outer ring finished individually, this grille set was made for longevity and premium quality with the aggressive looks that you've desired. Just snap these grilles in for an immediate aggressive look!

Show More Show Less

1M Style Rear Fender Flares - Pair

T#:21505762

Part#: E821MFLARES

In Stock

$ 595.00

This product was last offered at the strikethrough price on
08-16-2026

$ 566.99 USD

Add to Wish List

Qty

$ 566.99 USD

Add to Wish List

These fiber-reinforced polymer fender flares allow wider rear wheel fitment and looks closer to factory 1M for the rear! Recommended to use an OEM 1M rear bumper, or expect to have heavy modifications done to make the body lines match properly.

Show More Show Less

BMW Jack Pad Silver - Set Of 4

T#:26438196

Part#: BMWJACKPADSILR4

Ships in 1 Business Day

$ 77.99 USD

Add to Wish List

Qty

$ 77.99 USD

Add to Wish List

Carbon Fiber Replacement Mirror Covers - E90 E92 E93 M3 E82 1M ...

T#:396033

Part#: BM-0152

Ships on Oct 27, 2026

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

We design our carbon fiber mirror caps to be a direct OEM replacement. All replacement parts are made with 100% non-recycled raw plastic to ensure that the clips and tabs will not break off easily. Includes one pair of passenger and driver side direct OEM replacement mirror covers.

Install involves removing factory mirror covers and replacing with new carbon fiber mirror caps.

This product fits the following BMWs:
E90 M3
E92 M3
E93 M3
E82 1M

Show More Show Less

AutoTecknic Replacement Version II Dry Carbon Mirror Covers - E9X M3 ...

T#:38857246

Part#: BM-0152-DCG-T

Ships in 7 Business Days

$ 445.00 USD

Add to Wish List

Qty

$ 445.00 USD

Add to Wish List

These version II dry carbon mirror covers weigh only 121 grams, VS the version I ABS overlay at 239 grams on each side; that’s almost half the weight shaved! Other than the mounting clips, it's made of 100% carbon fiber, lighter in weight, and high tensile strength than our ABS overlaid version.

Show More Show Less

Active Autowerke Signature Trunk Emblem

T#:590914

Part#: AASIGNATUREPLAQU

Ships in 3 Business Days

4% off MSRP $ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Qty

4% off MSRP

$ 45.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 43.00 USD

Add to Wish List

Stand out from the crowd, and give them a hint of what you've got going on under the hood, with the official Active Autowerke Signature Emblem! The emblem can be placed anywhere on the exterior, or interior of your BMW. Hefty stainless steel construction and durable double-sided tape will help ensure that it is never lost, even at speeds over 170+ MPH...Don't ask us how we know! Represent your favorite BMW tuner for all to see today!

Show More Show Less

E82 1-Series M-Tech Carbon Fiber Rear Diffuser

T#:21670129

Part#: E82MTCFDIF

Ships in 5 Business Days

$ 425.00 USD

Add to Wish List

Qty

$ 425.00 USD

Add to Wish List

Looking for something to give your 1-series a more aggressive look? Look no further! This carbon fiber rear diffuser is the perfect addition to your M-Sport package and will be the cherry on top of the appearance of your ride! Build Material: Fiber-reinforced polymer and glossy carbon fiber coating

Show More Show Less

1M Carbon Fiber Rear Bumper Splitters - E82 - For 1M Design Rear Bump...

T#:21670130

Part#: E821MRRSPL

Ships in 5 Business Days

$ 220.00 USD

Add to Wish List

Qty

$ 220.00 USD

Add to Wish List

Put the cherry on top with these carbon splitters that go with the 1M design rear bumper! These carbon fiber rear splitters are the final piece you need to complete the 1M look on your 1-series! Build Material: Fiber-reinforced polymer and glossy carbon fiber coating

Show More Show Less

POR15 Rust Preventive Semi Gloss Black QT

T#:1575834

Part#: POR45404

Ships in 6 Business Days

$ 132.99 USD

Add to Wish List

Qty

$ 132.99 USD

Add to Wish List

Used by professional body men to prevent rust from returning

POR-15 Top Coat Chassis Black 14 Oz Spray

T#:1575835

Part#: POR45918

Ships in 6 Business Days

$ 59.99 USD

Add to Wish List

Qty

$ 59.99 USD

Add to Wish List

Quick and easy dress your chassis up with POR-15

Suvneer RZ Designed Carbon Fiber Hood - E82

T#:20089527

Part#: E82HOODGT

Back Ordered

$ 950.00 USD

Add to Wish List

Qty

$ 950.00 USD

Add to Wish List

Introducing the RZ Designed E82 Carbon Fiber Hood – a masterpiece of automotive engineering and aesthetic prowess. Crafted with precision and innovation, this carbon fiber hood redefines performance and style for your BMW E82, elevating it to new heights on both the road and the show circuit. Every detail has been meticulously considered, and the finish is nothing short of extraordinary. The carbon fiber weave is flawlessly aligned, showcasing the hood's premium quality and the dedication of RZ Designed to perfection. UV-resistant coatings ensure that the hood's appearance remains pristine, even under the most demanding environmental conditions

Show More Show Less

M-Tech Carbon Fiber Front Lip

T#:21670128

Part#: E82MTCFLIP

Back Ordered

$ 360.00 USD

Add to Wish List

Qty

$ 360.00 USD

Add to Wish List

Looking for something to give your 1-series a more aggressive look? Look no further! This carbon fiber front lip is the perfect addition to your M-Sport bumper and will be the cherry on top of the appearance of your ride! Build Material: Fiber-reinforced polymer and glossy carbon fiber coating

Show More Show Less

Suvneer Carbon Fiber Front Lip - RZ - BMW E82 1M Coupe

T#:51285635

Part#: E821MCFLIPRZ

Back Ordered

$ 503.00

This product was last offered at the strikethrough price on
08-16-2026

$ 450.00 USD

Add to Wish List

Qty

$ 450.00 USD

Add to Wish List

The Suvneer RZ Carbon Fiber Lip for the E82 1M is engineered using vacuum-bagging technology to ensure a high strength-to-weight ratio.

K3 Designed E & F Series Carbon Fiber Front Lip

T#:57050401

Part#: E92MT-K3-CFLIP

Ships in 5 Business Days

$ 240.00 USD

Add to Wish List

Qty

$ 240.00 USD

Add to Wish List

Transform your BMW's front end aerodynamics and give it a true track inspired posture with the K3 Designed Carbon Fiber Front Lip. Engineered specifically for E and F Series chassis

BMW Jack Pad Silver - Price Each

T#:30330970

Part#: BMWJACKPADSLVR1

Ships in 2 Business Days

$ 19.00 USD

Add to Wish List

Qty

$ 19.00 USD

Add to Wish List

1M Designed E82 Fog Front Bumper

T#:57231544

Part#: E821MFT

Ships in 5 Business Days

$ 535.00 USD

Add to Wish List

Qty

$ 535.00 USD

Add to Wish List

Add the 1M front bumper while retaining you stock fenders and hood. This is just the front bumper. Does not come with fog lights. Will have to Purchase the kidney grills.

Suvneer M4 Style Carbon Fiber Trunk Spoiler - BMW E82 1

T#:51285640

Part#: E82CFM4SPOILER

Ships in 5 Business Days

$ 203.00

This product was last offered at the strikethrough price on
08-17-2026

$ 190.00 USD

Add to Wish List

Qty

$ 190.00 USD

Add to Wish List

The Suvneer E82 M4 Style spoiler is a lightweight aerodynamic component designed to optimize the air departure angle at the rear of the vehicle.

POR 15 Metal Prep

T#:1575837

Part#: POR40204

Ships in 6 Business Days

$ 45.99 USD

Add to Wish List

Qty

$ 45.99 USD

Add to Wish List

Use with POR 15 product for better adhesion

Suvneer Performance Style Carbon Fiber Trunk Spoiler - BMW E82 Coupe ...

T#:51285641

Part#: E82CFPSPOILER

Ships in 5 Business Days

$ 203.00

This product was last offered at the strikethrough price on
08-17-2026

$ 190.00 USD

Add to Wish List

Qty

$ 190.00 USD

Add to Wish List

The Suvneer E82 Performance Style spoiler is a lightweight aerodynamic add-on engineered for precise fitment and long-term durability.

Autotecknic Replacement V3 Dry Carbon Mirror Covers - E9X M3 / E82 1M...

T#:21209845

Part#: ATK-BM-0152-DCG-

Ships in 7 Business Days

$ 395.00 USD

Add to Wish List

Qty

$ 395.00 USD

Add to Wish List

Carbon fiber is a staple in the performance world and has been incorporated into motorsports since the early 80s. Over time companies have taken it upon themselves to create new carbon products to add to your car that may have not been originally available. Autotecknic is no different. If you're looking for a carbon addition that has been made to the highest standards with premium materials, then Autotecknic's line of carbon additions is your one-stop shop. Take your M3 or 1M to the next level with these dry carbon mirror caps and give your a a much more aggressive appearance. What are you waiting for? get yours today! Dry carbon fiber's name comes from its manufacturing process. Dry carbon fiber is formed by using a "pre-preg" or impregnated piece of carbon materials. This piece of carbon is first placed into a mold and then into a sealed vacuum (autoclave) to properly cure. This method creates the least amount of waste and forms a lighter version of carbon than the “wet” method. The autoclave vacuuming process of making dry carbon means fewer pinholes and virtually no air pockets in the carbon. Dry carbon is the highest-quality version of carbon fiber products that are produced.

Show More Show Less