BMW Internal Engine Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Rebuilding your engine or giving your cylinder head an overhaul? Internal engine components covers parts that are located within the engine block and cylinder head. Examples include: timing chains and tensioners, rocker arms, rod bolts and studs, head bolts, valve springs, connecting rods, and more. These are Genuine BMW engine parts, performance upgrades, or approved aftermarket brands that have a long track record of reliability and quality.

Sub-Categories

Sort By:
VTT S55 Crank Bolt Capture - F8X S55 F3x N55
VTT S55 Crank Bolt Capture - F8X S55 F3x N55
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:557934
Part#: VTT-S55-CBC
In Stock
$ 129.99 USD
Free Shipping
Add to Wish List
$ 129.99 USD
Free Shipping
Add to Wish List
The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.
Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture - N55, S55
Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:558795
Part#: VTT-CRANKHUB-1
In Stock
$ 889.99 USD
Free Shipping
Add to Wish List
$ 889.99 USD
Free Shipping
Add to Wish List
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Spline Lock Crank Hub Solution W/ Complete Package - N55 S55
Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:18733532
Part#: VTT-CRANKHUB-6
In Stock
$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD
Free Shipping
Add to Wish List
$ 939.99 USD
Free Shipping
Add to Wish List
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
N54 Spline Lock Crank Hub Solution With Complete Package
N54 Spline Lock Crank Hub Solution With Complete Package
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:18733525
Part#: VTT-CRANKHUB-3
Ships in 5 Business Days
$ 939.99 USD
Free Shipping
Add to Wish List
$ 939.99 USD
Free Shipping
Add to Wish List
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package
Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:18733531
Part#: VTT-CRANKHUB-5
Ships in 10 Business Days
$ 880.99 USD
Free Shipping
Add to Wish List
$ 880.99 USD
Free Shipping
Add to Wish List
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
MAHLE Forged Piston Kit 84mm - N54 - 3.0L
MAHLE Forged Piston Kit 84mm - N54 - 3.0L
Mahle Motorsports - Corporate Logo
T#:2928970
Part#: 197832209
In Stock at Vendor
$ 1,088.99 USD
Free Shipping
Add to Wish List
$ 1,088.99 USD
Free Shipping
Add to Wish List
Forged, 2618. Phosphate + Grafal + Hard Anodized top ring groove + TBC
BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm
BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm
Mahle Motorsports - Corporate Logo
T#:2928972
Part#: 197832225
Back Ordered
$ 1,088.99 USD
Free Shipping
Add to Wish List
$ 1,088.99 USD
Free Shipping
Add to Wish List

BMW N54 3.0L MAHLE Forged Piston Kit 84.50mm delivers exceptional performance and reliability for BMW engines. This high-quality piston kit is designed to replace the weaker factory cast aluminum pistons with robust forged pistons, enhancing durability and heat tolerance for extreme engine conditions.

  • Enhanced Strength: Forged from 2618 aluminum, these pistons are more resistant to extreme heat, detonation, and high pressure, providing superior performance.
  • Precision Specifications:
    • Bore: 84.50mm
    • Stroke: 89.6mm
    • Rod: 145.05mm
    • CH: 31.7mm
    • Piston Style: Dish with 4 valve reliefs
    • Crown Volume: 17.2cc
    • Piston Mass: 314g
    • Pin Diameter: 22mm
    • Pin Style: Floating
  • Complete Kit: Includes pistons, pins, clips, and rings (1.0mm, 1.2mm, 2.8mm thickness).
  • Durable Coatings: Features phosphate, Grafal, and hard anodized top ring groove for added longevity.
  • Sold as a Set: Comes as a set of 6 pistons.

MAHLE Motorsport's PowerPak and PowerPak+ piston kits are engineered for both high-performance and everyday driving, offering a reliable upgrade for BMW engines. With over 95 years of performance experience, MAHLE Motorsport provides advanced features and superior quality for your engine build.

Show More Show Less
Spline Lock Crank Hub Solution W/ Crank Bolt Capture - N54
Spline Lock Crank Hub Solution W/ Crank Bolt Capture - N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:18733527
Part#: VTT-CRANKHUB-2
Ships in 10 Business Days
$ 871.99 USD
Free Shipping
Add to Wish List
$ 871.99 USD
Free Shipping
Add to Wish List
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Spline Lock Crank Hub Solution W/ Hardware Package - N54
Spline Lock Crank Hub Solution W/ Hardware Package - N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:18733526
Part#: VTT-CRANKHUB-4
Ships in 10 Business Days
$ 880.99 USD
Free Shipping
Add to Wish List
$ 880.99 USD
Free Shipping
Add to Wish List
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Vargas "Spline Lock" Crank Hub Solution - N54
Vargas "Spline Lock" Crank Hub Solution - N54
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:558924
Part#: VTT-N54-CRANKHUB
Ships in 10 Business Days
$ 818.99 USD
Free Shipping
Add to Wish List
$ 818.99 USD
Free Shipping
Add to Wish List
Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.
Show More Show Less
Spline Lock Crank Hub Solution
Spline Lock Crank Hub Solution
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:8061334
Part#: VTT-N55-CRANKHUB
Ships in 10 Business Days
$ 818.99 USD
Free Shipping
Add to Wish List
$ 818.99 USD
Free Shipping
Add to Wish List
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.
Show More Show Less
VTT N54 “Spline Lock” CrankHub Solution Package W/ Crank Bolt Capture
VTT N54 “Spline Lock” CrankHub Solution Package W/ Crank Bolt Cap...
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:19395579
Part#: VTTCRANKHUBPKG
Ships in 10 Business Days
$ 934.99 USD
Free Shipping
Add to Wish List
$ 934.99 USD
Free Shipping
Add to Wish List
VTT is proud to offer the only complete N54 complete crank hub solution that does NOT require the crank to be drilled for pins. Our hub uses our proprietary “Spline Lock” technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). We spent many months testing, and retesting this design, utilizing well over 10 different samples to come to our final production version. During testing, our final hub managed to break our testing rig before slipping. These have been bench tested, and real-world tested on the VTT N54 race car spinning 8K RPM and making well over 900WHP. This technology means our hub installs the same as a stock hub, no drilling of the crank, which means MUCH less labor is involved and is reversible is ever wanting to be uninstalled leaving no holes in the crank. The “Spline Lock” is ONLY available with the VTT Crank bolt capture for the ULTIMATE Crank Hub solution for your BMW. These parts are designed to be used together, and the spline lock should not run without the CBC VTT “Spline Lock” Crank hubs are CNC manufactured from 440C tool Steel with a Rockwell rating of HRC60 for the ultimate in durability, and toughness. Hub Plus OEM bolt OEM Oil pump sprocket OEM oil sprocket retainer VTT Crank bolt capture
Show More Show Less
MAHLE PowerPak Piston Kit 84mm with Thermal Barrier Coating (TBC) - N54 - 3.0L
MAHLE PowerPak Piston Kit 84mm with Thermal Barrier Coating (TBC) - N...
Mahle Motorsports - Corporate Logo
T#:2928971
Part#: 197832209T
Special Order: No Guaranteed ETA
$ 1,271.99 USD
Free Shipping
Add to Wish List
$ 1,271.99 USD
Free Shipping
Add to Wish List
Forged, 2618. Phosphate + Grafal + Hard Anodized top ring groove + TBC Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston. MAHLE forged pistons more tolerant to the abuses of extreme heat, detonation and pressure inherent in performance oriented engines.
Show More Show Less
MAHLE Forged Piston Kit 84mm with Thermal Barrier Coating (TBC) - N54 - 3.0L
MAHLE Forged Piston Kit 84mm with Thermal Barrier Coating (TBC) - N54...
Mahle Motorsports - Corporate Logo
T#:2928969
Part#: 197841309T
Special Order: No Guaranteed ETA
$ 1,271.99 USD
Free Shipping
Add to Wish List
$ 1,271.99 USD
Free Shipping
Add to Wish List
Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less
BMW N54 3.0L MAHLE Forged Piston Kit 84mm
BMW N54 3.0L MAHLE Forged Piston Kit 84mm
Mahle Motorsports - Corporate Logo
T#:2928968
Part#: 197841309
Back Ordered
$ 1,088.99 USD
Free Shipping
Add to Wish List
$ 1,088.99 USD
Free Shipping
Add to Wish List

BMW N54 3.0L MAHLE Forged Piston Kit 84mm delivers superior performance and reliability for your BMW engine build. This high-quality piston kit replaces the factory cast aluminum pistons with robust forged pistons, offering enhanced durability and heat resistance. Designed to withstand the stresses of extreme temperatures, detonation, and high pressure, these pistons are ideal for high-performance applications. MAHLE Motorsport’s PowerPak Piston Kit ensures a significant upgrade in strength and reliability, making it perfect for both motorsport enthusiasts and those seeking to enhance their daily driving experience.

  • Enhanced Durability: Forged pistons provide superior strength and are more resistant to extreme heat, detonation, and high pressure compared to cast aluminum.
  • Precision Engineering: Made from high-quality 2618 alloy, ensuring reliability under demanding conditions.
  • Complete Kit: Includes pistons, pins, clips, and rings for a comprehensive upgrade.
  • Optimized Performance: Designed for high-performance applications, improving engine efficiency and power output.
  • Advanced Coatings: Features phosphate, Grafal, and hard anodized top ring groove coatings for extended longevity and performance.

Specifications:

  • Compression Ratio: 9.5:1
  • Bore: 84.00mm
  • Stroke: 89.6mm
  • Rod: 145.05mm
  • CH: 31.7mm
  • Piston Style: Dish, with 4 valve reliefs
  • Crown Volume: 17.2cc
  • Piston Mass: 314g
  • Piston Material: Forged, 2618
  • Pin Diameter: 22mm
  • Pin Style: Floating
  • Pins Included: Yes
  • Clip Style: Round Wire
  • Clips Included: Yes
  • Piston Ring Thickness: 1.0mm, 1.2mm, 2.8mm
  • Rings Included: Yes
  • Sold As: Set of 6
  • Coatings: Phosphate, Grafal, Hard Anodized top ring groove
Show More Show Less
MAHLE Forged Piston Kit 84.50mm - N54 - 3.0L
MAHLE Forged Piston Kit 84.50mm - N54 - 3.0L
Mahle Motorsports - Corporate Logo
T#:2928976
Part#: 197841325
Back Ordered
$ 1,088.99 USD
Free Shipping
Add to Wish List
$ 1,088.99 USD
Free Shipping
Add to Wish List
Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less
MAHLE Forged Piston Kit 84.50mm with Thermal Barrier Coating (TBC) - N54 - 3.0L
MAHLE Forged Piston Kit 84.50mm with Thermal Barrier Coating (TBC) - ...
Mahle Motorsports - Corporate Logo
T#:2928973
Part#: 197832225T
Special Order: No Guaranteed ETA
$ 1,271.99 USD
Free Shipping
Add to Wish List
$ 1,271.99 USD
Free Shipping
Add to Wish List
Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less
MAHLE Forged Piston Kit 84.50mm with Thermal Barrier Coating (TBC) - N54 - 3.0L
MAHLE Forged Piston Kit 84.50mm with Thermal Barrier Coating (TBC) - ...
Mahle Motorsports - Corporate Logo
T#:2928977
Part#: 197841325T
Special Order: No Guaranteed ETA
$ 1,271.99 USD
Free Shipping
Add to Wish List
$ 1,271.99 USD
Free Shipping
Add to Wish List
Forged, 2618. Get the performance and reliability your N54 needs with MAHLE Motorsports PowerPak Piston Kit. Replacing the weaker factory cast aluminum pistons with the strength and durability of a forged piston.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Shipping