BMW Internal Engine Parts for BMW 1 Series E82 (2008-2013)

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes

T#:557934

Part#: VTT-S55-CBC

In Stock

$ 129.99 USD

Add to Wish List

Qty

$ 129.99 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

$ 889.99 USD

Add to Wish List

Qty

$ 889.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:18733532

Part#: VTT-CRANKHUB-6

In Stock

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Supertech Single Groove Exhaust Valve - Priced Each

T#:21472889

Part#: BMEVI-1055S-HS

Ships in 5 Business Days

$ 55.99 USD

Add to Wish List

Qty

$ 55.99 USD

Add to Wish List

Single Groove sodium filled exhaust valves for high performance builds Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 112.9mm Stem Diam: 5.96mm

Show More Show Less

5mm Single Groove Valve Keeper - Set Of 24

T#:21604314

Part#: KPR-5.0-7S-24

In Stock

$ 72.99

This product was last offered at the strikethrough price on
08-13-2026

$ 67.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 72.99

This product was last offered at the strikethrough price on
08-13-2026

$ 67.99 USD

Limited Qty Sale

Add to Wish List

Two required per valve, for use with certain supertech valves 5.0mm single groove

N54 Spline Lock Crank Hub Solution With Complete Package

2X Entries Into Our F80 M3 Sweepstakes

T#:18733525

Part#: VTT-CRANKHUB-3

Ships in 5 Business Days

$ 939.99 USD

Add to Wish List

Qty

$ 939.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

BMW N54 ARP Head Stud Kit

T#:17538610

Part#: ARP-HSK-N54-14

Ships in 3 Business Days

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.

Show More Show Less

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

2X Entries Into Our F80 M3 Sweepstakes

T#:18733531

Part#: VTT-CRANKHUB-5

Ships on Sep 18, 2026

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

ARP Performance Head Stud Kit - N54

T#:1061441

Part#: ARP-HSK-N54

Ships in 3 Business Days

$ 554.99 USD

Add to Wish List

Qty

$ 554.99 USD

Add to Wish List

Despite the fact that BMW engineers some of the worlds most revered engines, during number crunching something always has to be a compromise. One item that is always found to be a weak point- the OEM hardware. It is definitely sub-par for real performance use under high stress such as modded engines and track use. We use these fasteners on all of VAC's in-house head builds. Whenever the head is coming off, your switching to forced induction, or if you are simply prepping to drive your car hard; we highly recommend switching to far superior race-grade hardware. These Head Stud Kits greatly improve reliability; helping to eliminate movement of the of the cylinder head and intern, gasket failure caused by inferior OEM head-bolt stretch. This is the #1 cause of premature head gasket failure, especially on boosted or high output engines. Though more expensive than OEM, converting to one of VAC's head studs kits will not only give added strength and reliability when its needed most, but provides the most accurate torque readings because studs don’t “twist” into the block; all clamping forces are on one axis, and there is less force exerted on the normally stressed threads of the block. This increases block and hardware life and typically makes the head easier to properly install to the block, a blessing if your head may have to be removed more than once. Especially in the time crunch of racing, when engines are dissembled frequently, studs make removing and installing the cylinder head on to the block a much easier task. By allowing the studs to act as a guide on to the head, your head slides on and off and also ensures proper alignment of the head and gasket for the same reason. It is similar to converting your wheel-bolts to wheel-studs.

Show More Show Less

Supertech Forged Pistons - Set Of 6

T#:21604329

Part#: P6-BMN55-84-T-6

In Stock

$ 984.99

This product was last offered at the strikethrough price on
05-21-2026

$ 904.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 984.99

This product was last offered at the strikethrough price on
05-21-2026

$ 904.99 USD

Limited Qty Sale

Add to Wish List

Supertech forged pistons are a great choice for performance engine builds! Bore: 84.00mm Over Size: STD Comp Ratio: 10.2:1 Dome dish: -10.4 Head CCs: 37cc Comp Height: 32.40mm Stroke: 89.60mm Skirt style: Slipper Design Rod Length: 141.35mm Pin Diam: 22mm Material: 4032 Application: All Motor / Turbo Ring part number: R84-GNH8400 (MUST BE PURCHASED SEPARATELY)

Show More Show Less

Spline Lock Crank Hub Solution W/ Crank Bolt Capture - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:18733527

Part#: VTT-CRANKHUB-2

Ships on Sep 18, 2026

$ 871.99 USD

Add to Wish List

Qty

$ 871.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline Lock Crank Hub Solution W/ Hardware Package - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:18733526

Part#: VTT-CRANKHUB-4

Ships on Sep 18, 2026

$ 880.99 USD

Add to Wish List

Qty

$ 880.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:558924

Part#: VTT-N54-CRANKHUB

Ships on Sep 18, 2026

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Spline Lock Crank Hub Solution

2X Entries Into Our F80 M3 Sweepstakes

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships on Sep 18, 2026

$ 818.99 USD

Add to Wish List

Qty

$ 818.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

VTT N54 “Spline Lock” CrankHub Solution Package W/ Crank Bolt Cap...

2X Entries Into Our F80 M3 Sweepstakes

T#:19395579

Part#: VTTCRANKHUBPKG

Ships on Sep 18, 2026

$ 934.99 USD

Add to Wish List

Qty

$ 934.99 USD

Add to Wish List

VTT is proud to offer the only complete N54 complete crank hub solution that does NOT require the crank to be drilled for pins. Our hub uses our proprietary “Spline Lock” technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). We spent many months testing, and retesting this design, utilizing well over 10 different samples to come to our final production version. During testing, our final hub managed to break our testing rig before slipping. These have been bench tested, and real-world tested on the VTT N54 race car spinning 8K RPM and making well over 900WHP. This technology means our hub installs the same as a stock hub, no drilling of the crank, which means MUCH less labor is involved and is reversible is ever wanting to be uninstalled leaving no holes in the crank. The “Spline Lock” is ONLY available with the VTT Crank bolt capture for the ULTIMATE Crank Hub solution for your BMW. These parts are designed to be used together, and the spline lock should not run without the CBC VTT “Spline Lock” Crank hubs are CNC manufactured from 440C tool Steel with a Rockwell rating of HRC60 for the ultimate in durability, and toughness. Hub Plus OEM bolt OEM Oil pump sprocket OEM oil sprocket retainer VTT Crank bolt capture

Show More Show Less

Supertech Titanium Valve Retainers - Intake - Set Of 12

T#:21604322

Part#: RET-BMN54-TI-12

Ships in 7 Business Days

$ 197.99 USD

Add to Wish List

Qty

$ 197.99 USD

Add to Wish List

7 Degree - 5mm valve stem - Single or Tripe Groove Valves

Supertech Single Groove Intake Valve - Set Of 12

T#:14783498

Part#: BMIVN-1055S-12

Ships in 9 Business Days

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

Head Diam: 32mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 104.9mm Stem Diam: 4.97mm

Supertech Titanium Valve Retainers - Exhaust - Set Of 12

T#:21604321

Part#: RET-BMN54-TE-12

Ships in 7 Business Days

$ 197.99 USD

Add to Wish List

Qty

$ 197.99 USD

Add to Wish List

7 Degree - 6mm valve stem - Single or Tripe Groove Valves

Supertech Single Groove Exhaust Valve - Set Of 12

T#:14816646

Part#: BMEVI-1055S-HS-1

Ships in 5 Business Days

$ 660.99 USD

Add to Wish List

Qty

$ 660.99 USD

Add to Wish List

Single Groove sodium filled exhaust valve set for high performance builds Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 112.9mm Stem Diam: 5.96mm

Show More Show Less

Performance Dual Valve Spring Kit with Steel Retainers - Set Of 24 ...

T#:21604308

Part#: SPRKFE20N54BE

Ships in 5 Business Days

$ 965.99 USD

Add to Wish List

Qty

$ 965.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Can be used with factory valve stem seals and keepers. InnSpr.OD: 21mm InnSpr.ID: 14.2mm Seat Pressure: 75 @ 36.5 Open Pressure: 155 @ 10 Max Lift: 12mm Coil Bind: 23.2mm Rate: 8 Kit spring: SPR-FE20BE Kit spring qty: 24 Retainer: RET-BMN54-TI (5mm) / RET-BMN54-TE (6mm) OutSpr.OD: 24.4mm OutSpr.ID: 17.6mm Retainer qty: 24

Show More Show Less

Conical Spring Kit - Set Of 24

T#:21604309

Part#: SPRKFE20N54BE2

Ships in 6 Business Days

$ 965.99 USD

Add to Wish List

Qty

$ 965.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Can be used with factory valve stem seals and keepers. InnSpr.OD: 21mm InnSpr.ID: 14.2mm Seat Pressure: 88 @ 36.5 Open Pressure: 160 @ 10 Max Lift: 12mm Coil Bind: 23.2mm Rate: 7.25 Kit spring: SPR-FE20BE-2 Kit spring qty: 24 Retainer: RET-BMN54-TI (5mm) / RET-BMN54-TE (6mm) OutSpr.OD: 24.4mm OutSpr.ID: 17.6mm Retainer qty: 24

Show More Show Less

Schrick - N52 Performance Camshaft Set - 238/272

T#:26904914

Part#: SCH-N52-238/272

Special Order: No Guaranteed ETA

$ 1,749.99 USD

Add to Wish List

Qty

$ 1,749.99 USD

Add to Wish List

WPC Treated Cam Bearing Ledge - Exhaust - BMW N52 2.0L N54 N55 3.0L ...

10X Entries Into Our F80 M3 Sweepstakes

T#:585946

Part#: 11127531224WPC

In Stock

$ 916.99 USD

Add to Wish List

Qty

$ 916.99 USD

Add to Wish List

A common issue on N54 motors is cam bearing ledge scoring due to lack of lubrication, and if left unattended can cause damage to the camshaft and increase oil consumption. These WPC-treated cam bearing ledges help prevent lubrication issues to ensure no scoring occurs on the bearing ledge or camshaft. What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both.

Show More Show Less

WPC Treated Cam Bearing Ledge - Intake - BMW N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:585945

Part#: 11127550913WPC

In Stock

$ 898.99 USD

Add to Wish List

Qty

$ 898.99 USD

Add to Wish List

A common issue on N54 motors is cam bearing ledge scoring due to lack of lubrication, and if left unattended can cause damage to the camshaft and increase oil consumption. These WPC-treated cam bearing ledges help prevent lubrication issues to ensure no scoring occurs on the bearing ledge or camshaft. What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both.

Show More Show Less

Forged Connecting Rods - Sold Each

T#:21604327

Part#: CR-BMN55-H144.35

Special Order: No Guaranteed ETA

$ 198.99 USD

Add to Wish List

Qty

$ 198.99 USD

Add to Wish List

Supertech forged rods are a great choice for performance engine builds! These rods come with ARP 2000 hardware and are designed for high powered N55/S55 applications. H-Beam design Forged 4340 alloy Center to center: 144.35mm Be bore: 53.6mm Be width: 20.88 Pe bore: 22mm full float Pe width: 20.88mm tapered ARP 2000 - 3/8" x 1.600" bolts

Show More Show Less

Exhaust Valve - Sodium Filled - Oversize

T#:21505757

Part#: BMEVI-1054S-HS-1

In Stock

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Head Diam: 28.50m (+0.5mm) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

Exhaust Valve Set - Sodium Filled - Oversize

T#:21505765

Part#: BMEVI1054SHS-1KT

In Stock

$ 660.99 USD

Add to Wish List

Qty

$ 660.99 USD

Add to Wish List

Head Diam: 28.50m (+0.5mm) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

Exhaust Valve - Sodium Filled - Std Size

T#:21505756

Part#: BMEVI-1054S-HS

In Stock

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 55.99

This product was last offered at the strikethrough price on
05-03-2026

$ 50.99 USD

Limited Qty Sale

Add to Wish List

Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

Intake Valve - Black Nitride - Oversize

T#:21505753

Part#: BMIVN-1054S-1

Ships on Sep 24, 2026

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Head Diam: 31.9mm (+0.5mm) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

WPC Treated Cam Bearing Ledge Kit - BMW N54 3.0L

10X Entries Into Our F80 M3 Sweepstakes

T#:14651263

Part#: 11127550913WKT

In Stock

$ 1,815.99 USD

Add to Wish List

Qty

$ 1,815.99 USD

Add to Wish List

A common issue on N54 motors is cam bearing ledges scoring due to lack of lubrication, and if left unattended can cause damage to the camshafts and increase oil consumption. These WPC-treated cam bearing ledges help prevent lubrication issues to ensure no scoring occurs on the bearing ledge or camshaft. What is WPC, you ask? WPC is a surface treatment that reduces friction and adds strength - two improvements that benefit internal engine components. Ultra-fine particles are fired at the surface at very high speeds, like shot-peening - but much, much smaller. The parts come out smoother and stronger due to thermal discharge. The two largest enemies of any high-performance engine are heat and friction - and WPC has found a way to reduce both.

Show More Show Less

Intake Valve - Black Nitride

T#:21505752

Part#: BMIVN-1054S

In Stock

$ 25.99

This product was last offered at the strikethrough price on
06-08-2026

$ 23.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 25.99

This product was last offered at the strikethrough price on
06-08-2026

$ 23.99 USD

Limited Qty Sale

Add to Wish List

Head Diam: 31.40mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

Performance Conical Valve Spring - Sold Each

T#:21472894

Part#: SPR-FE20BE

In Stock

$ 19.99 USD

Add to Wish List

Qty

$ 19.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 75 @ 37 Open Pressure: 155 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm Rate: 8 OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm

Show More Show Less

Intake Valve Set - Black Nitride - Std Size

T#:21505754

Part#: BMIVN-1054SKT

Ships in 6 Business Days

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

Head Diam: 31.40mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

Supertech Titanium Valve Retainers - Exhaust - Sold Each

T#:21604320

Part#: RET-BMN54-TE

Ships in 9 Business Days

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

7 Degree - 6mm valve stem - Single or Tripe Groove Valves

Supertech Titanium Valve Retainers - Intake - Sold Each

T#:21604319

Part#: RET-BMN54-TI

Ships in 9 Business Days

$ 16.99 USD

Add to Wish List

Qty

$ 16.99 USD

Add to Wish List

7 Degree - 5mm valve stem - Single or Tripe Groove Valves

Performance Conical Valve Spring - Sold Each

T#:21604306

Part#: SPR-FE20BE-2

Ships in 9 Business Days

$ 20.99 USD

Add to Wish List

Qty

$ 20.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 84 @ 37 Open Pressure: 157 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm Rate: 7.25

Show More Show Less

Supertech Single Groove Intake Valve - Priced Each

T#:14783497

Part#: BMIVN-1055S

Ships in 9 Business Days

$ 25.99 USD

Add to Wish List

Qty

$ 25.99 USD

Add to Wish List

Head Diam: 32mm (std) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 104.9mm Stem Diam: 4.97mm

Performance Conical Valve Spring - Set Of 24

T#:21604324

Part#: SPR-FE20BE-24

Ships in 9 Business Days

$ 471.99 USD

Add to Wish List

Qty

$ 471.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 75 @ 37 Open Pressure: 155 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm Rate: 8 OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm

Show More Show Less

Performance Conical Valve Spring - Set Of 24

T#:21604325

Part#: SPR-FE20BE-2-24

Ships in 9 Business Days

$ 494.99 USD

Add to Wish List

Qty

$ 494.99 USD

Add to Wish List

Supertech has the high performance valvetrain components you need to take your build to the next level. Seat Pressure: 84 @ 37 Open Pressure: 157 @ 10 Max Lift: 12.2mm Coil Bind: 23.20mm OutSpr.ID: 17.60mm InnSpr.OD: 21.00mm InnSpr.ID: 14.20mm Rate: 7.25

Show More Show Less

Intake Valve Set - Black Nitride - Oversize

T#:21505755

Part#: BMIVN-1054S-1KT

Ships on Sep 24, 2026

$ 310.99 USD

Add to Wish List

Qty

$ 310.99 USD

Add to Wish List

Head Diam: 31.9mm (+0.5mm) Material: Stainless Steel 21-4N Groove Type: Single Groove Length: 106.7mm Stem Diam: 4.96mm

SuperTech High Performance Valve Spring Kit - 88lbs - BMW N55 S55 ...

T#:14783500

Part#: SUP-HPVSK-S55-88

Ships on Sep 21, 2026

$ 1,099.99 USD

Add to Wish List

Qty

$ 1,099.99 USD

Add to Wish List

CP-Carrillo Forged Piston Set - N54

T#:28736798

Part#: CPFPS-N54-84-9.2

Ships on Sep 22, 2026

$ 2,077.99 USD

Add to Wish List

Qty

$ 2,077.99 USD

Add to Wish List

Exhaust Valve Set - Sodium Filled - Std Size

T#:21505767

Part#: BMEVI-1054S-HSKT

Ships on Oct 1, 2026

$ 660.99 USD

Add to Wish List

Qty

$ 660.99 USD

Add to Wish List

Head Diam: 28mm (std) Material: Inconel-Nimonic / Sodium Filled Groove Type: Single Groove Length: 114.9mm Stem Diam: 5.95mm

N54 Schrick Camshaft Set 268/265

T#:25739348

Part#: N54CAMSKT

Ships on Dec 22, 2026

$ 3,415.99 USD

Add to Wish List

Qty

$ 3,415.99 USD

Add to Wish List

Take your N54-powered BMW to the next level with this upgraded camshaft kit from Schrick Cams! Increasing the air allowed in and out of the motor by increasing both lift and duration over stock is one of the most effective ways to add power to your car next to adding more boost. We recommend finding a competent tuner to get the most out of your individual setup. Duration Duration Intake: 268 Duration Intake @ 1mm: 219 Duration Exhaust: 264 Duration Exhaust @ 1mm: 214 Intake Peak Timing: 125,6 Exhaust Peak Timing: -128 Lift Cam Lobe Lift Intake: 7,2 Cam Lobe Lift Exhaust: 6,54 Valve Lift Without Valve Clearance Intake: 12 Valve Lift Without Valve Clearance Exhaust: 11 Valve Clearance Intake: hydr. Valve Clearance Exhaust:

Show More Show Less

5mm Single Groove Valve Keeper - Priced Each

T#:21604312

Part#: KPR-5.0-7S

Back Ordered

$ 3.99 USD

Add to Wish List

Qty

$ 3.99 USD

Add to Wish List

Two required per valve, necessary use with certain supertech valves 5.0mm single groove

Project Cars

SELECT YOUR BMW

BMW Internal Engine Parts for BMW 1 Series E82 (2008-2013)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results