Charge Pipes & Turbo Inlets for BMW 1 Series E82 (2008-2013)

BMS Aluminum Performance Chargepipe w/ Tial BOV & Flange - N54 ...

Not for sale or use in the state of California.

T#:556772

Part#: BMS-N54-CP-WBOV

In Stock

$ 479.00 USD

Add to Wish List

Qty

$ 479.00 USD

Add to Wish List

Tired of your factory plastic charge pipe blowing off or ripping apart under boost? Upgrade your flimsy OEM unit to our heavy-duty aluminum replacement. Designed by Burger Motorsports, Inc and manufactured overseas our replacement charge pipe upgrade features all-aluminum construction, high quality matte black finish, CNC machined flanges, OEM style mounting hardware for a direct fit, and a lifetime warranty. Because we use the OEM mounting system, unlike other charge pipe solutions, this charge pipe installs in minutes, retains all emissions fittings, and is 100% reversible. Includes two 1/8" NPT bungs with optimal 180 degree placement. Lifetime warranty. The blow-off valve flange on the BOV charge pipes are for TIAL Q 50mm or Turbosmart (female tial flange). Installation requires charge pipe gaskets and charge pipe clips to be transferred over from the removed factory charge pipe. Replaces OEM BMW Charge-Air Duct part # 13717615026 Specs and Features: Aluminum Construction Black Powder Coating 3" Diameter Tial BOV Flange and BOV included! CNC Machined Throttle Body Flange Dual 1/8" NPT Bungs High Pressure T-Bolt Clamps All Required Installation Hardware *Not for sale or use in the state of California.

Show More Show Less

BMS Aluminum Performance Upper Chargepipe - N55

Not for sale or use in the state of California.

T#:556773

Part#: BMS-N55-CP

Ships in 8 Business Days

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Tired of your factory plastic charge pipe blowing off or ripping apart under boost? Upgrade your flimsy OEM unit to our heavy-duty aluminum replacement for 1/3 of the price of the factory unit. Designed by Burger Motorsports and manufactured overseas our replacement charge pipe features all aluminum construction, high-quality matte black finish, CNC machined flanges, OEM style mounting hardware for a direct fit, and a lifetime warranty. Because we use the OEM mounting system, unlike other charge pipe solutions, this charge pipe installs in minutes, retains all emissions fittings, and is 100% reversible. Includes two 1/8" NPT bungs with optimal 180-degree placement. Lifetime warranty. Installation requires charge pipe gaskets and charge pipe clips to be transferred over from the removed factory charge pipe. Replaces OEM BMW Charge-Air Duct part #13717615026 What's Included (1) BMS Aluminum Replacement Charge Pipe (1) Heavy-duty silicone coupler (2) Heavy-duty clamps (2) 1/8 NPT bung plugs

Show More Show Less

Turner Motorsport N54 Silicone Turbo Inlet Hose Kit - Stock Location ...

10X Entries Into Our F80 M3 Sweepstakes

T#:599103

Part#: TMSN54STIH

Ships on Nov 30, 2026

Sale - Save 20% $ 416.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 333.59 USD

Add to Wish List

Sale - Save 20%

$ 416.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 333.59 USD

Add to Wish List

If you have owned your BMW for any length of time, you are most likely aware of BMW's less-than-stellar reputation for developing weak plastic hoses and other parts. A great example of this are the N54 turbo inlet pipes. Over time, constant temperature swings cause these plastic pipes/hoses to become brittle. This often leads to cracks, splits, or even complete failure, allowing your turbos to suck in unfiltered air. To prevent this from happening to you, we are proud to present our very own Turner Motorsport N54 Silicone Turbo Inlet Hoses! Silicone inlet hoses are extremely reliable, resisting heat and pressure significantly better than plastic. This is perfect people who are just looking for a simple, reliable upgrade, or people who want to push the limits of their BMW and are looking to make more boost and more power without worrying about failing inlets. Available in two sizes, our kits can support either stock (44mm) or upgraded (50mm) turbos and include adapters to reconnect your turbo bypass pipes. If you plan to upgrade your charge pipes, replace the stock diverter valves with aftermarket atmospheric blow-off-valves, or want to convert your BMW to a catch can system, we also recommend the optionally available Turner Motorsport N54 Inlet Hose Plug Kit. This kit blocks off the turbo bypass pipe connections and PCV connections that will no longer be needed.

Show More Show Less

Active Autowerke N54 Blow Off Valve Kit - E82 135i, 1M, E9X 335i ...

T#:4416

Part#: AABOVKIT-N54

In Stock

$ 565.99

This product was last offered at the strikethrough price on
09-01-2026

$ 529.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 565.99

This product was last offered at the strikethrough price on
09-01-2026

$ 529.99 USD

Limited Qty Sale

Add to Wish List

When adding boost to the N54 engine, it's important to consider effects throughout the rest of the system. Additional boost can overwhelm the stock BMW diverter valve system and lead to boost leakage, or boost spikes, and lost horsepower. With the factory components in place it's hard to maintain consistently high boost levels. Instead of the weak plastic components of the stock system, Active Autowerke uses a CNC-machined and mandrel-bent aluminum tube with a Venturi blow-off valve in place of the original diverter valves. The blow-off valve dumps overboost into the atmosphere for that distinctive turbo 'whoosh' sound. The single AA BOV is over-sized for the N54 application - taking the place of the two small diverter valves, and verified to handle over 600hp. With the BOV acting properly your turbos and other components are protected from compressor surge caused by excess pressure build-up.

We like the Active BOV better than other forms of diverter and BOV kits because it's tried and true - AA was the original turbo BMW tuners and their experience is second to none. That's why they took the time to engineer their kit to fit perfectly, using the OE-type connector to the throttle body, and high-strength silicone to the lower intercooler tube. Each connection is a tight, leak-free seal. The kit comes complete with the discharge tube, vacuum plugs for the stock hoses, and instructions. The tube is powdercoated in black and with a wrinkle finish for an OE appearance.

This item fits the following BMWs with N54 engine:
2008-2010 E82 BMW 135i 1M
2007-2010 E90 BMW 335i 335xi 335i xDrive
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive
2007-2010 E93 BMW 335i

Show More Show Less

Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i ...

T#:388675

Part#: 340366TCKD4AMN6T

Ships in 4 Business Days

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

N55 Charge Pipe Upgrade

T#:341887

Part#: 135N55CP-KIT

Ships in 4 Business Days

$ 189.99 USD

Add to Wish List

Qty

$ 189.99 USD

Add to Wish List

Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i ...

T#:340366

Part#: N55CP-KIT

Ships in 3 Business Days

Starting at $ 189.99 USD

Add to Wish List

Starting at $ 189.99 USD

Add to Wish List

One major weak point in the N55 turbo plumbing is the stock upper chargepipe from the intercooler outlet to the intake manifold. The original N55 charge pipe is made from a weak plastic and can fail with even stock boost levels. The most common problem is a crack that develops along a seam where the pipe connects to the throttle body. Any crack here is bad as it creates a massive vacuum leak and the engine electronics will put the car into limp mode. If you don't want to be sidelined there is a very simple fix - the Active Autowerke N55 charge pipe.

This aluminum pipe is much stronger and more durable and nearly indestructable for the N55 application. It uses a CNC-machined factory-style connection and o-ring to the throttle body to ensure a tight and leak-free seal. The piping is a consistent 3" diameter for better flow and an improved throttle response. AA has included a raised boss with two ports should you choose to add a water/meth injection system later. The factory MAP sensor installs in the same location and the pipe is powdercoated black for a factory-type appearance.

With a stronger pipe you don't have to worry about the infamous chargepipe crack and lost boost levels and horsepower. All of the boost in the world is useless if it's leaking so using beefed up components in place of the weak factory pieces is the smart way to consistently high power output.

This item fits the following BMWs with the N55 engine:
2011-2012 E82 BMW 135i
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2011-2013 E93 BMW 335i - Convertible

Show More Show Less

Phoenix Racing Aluminum Performance Chargepipe - N54

Not for sale or use in the state of California.

T#:556770

Part#: BMS-N54-CP-OEDV

Special Order: No Guaranteed ETA

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe. This is perfect for someone looking to upgrade a stock or tuned N54!

Specs and Features:

Aluminum Construction
Black Powder Coating
3" Diameter
CNC Machined Throttle Body Flange
Dual 1/8" NPT Bungs
High Pressure T-Bolt Clamps
All Required Installation Hardware

O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.

Show More Show Less

Phoenix Racing Aluminum Performance Chargepipe w/ Tial BOV Flange - N...

Not for sale or use in the state of California.

T#:556771

Part#: BMS-N54-CP-BOVF

Special Order: No Guaranteed ETA

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

If you are looking to replace your stock chargepipe for better reliability and higher performance, the Burger Motorsports designed and Phoenix Racing built Performance Aluminum Chargepipe is an excellent choice! This aluminum chargepipe is significantly stronger than the stock plastic pipe and the powder coated aluminum looks great and will resist any corrosion. Plus, this chargepipe features a 3 inch design for optimal flow at all RPMs, prevent restriction that would normally be seen with the stock pipe.

In addition, this pipe also includes a Tial BOV flange for easy installation of a Tial BOV without any modifications needed to the chargepipe. This is perfect for someone looking to upgrade a tuned or heavily modified N54!

Specs and Features:

Aluminum Construction
Black Powder Coating
3" Diameter
Tial BOV Flange
CNC Machined Throttle Body Flange
Dual 1/8" NPT Bungs
High Pressure T-Bolt Clamps
All Required Installation Hardware

O-rings and retaining clip must be reused from the original pipe or purchased new for proper installation.

Show More Show Less

FTP Motorsport Lower Charge Pipe - E9X, E8X N54/N55

T#:582199

Part#: SG71414

Special Order: No Guaranteed ETA

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

This is a replacement boost pipe that is made from solid aluminum so it won't break, come loose or deteriorate over time. Connects intercooler to upper charge pipe. Features: Increased throttle response and decreases turbo lag Powder-coated black aluminum piping Throttle body matched 3 "piping Billet CNC OEM TB Flange for a leak-free connection Includes everything necessary to upgrade from the factory charge pipe

Show More Show Less

FTP Motorsport Charge Pipe - E9X E8X (N55)

T#:583183

Part#: SG71312

Special Order: No Guaranteed ETA

$ 220.00 USD

Add to Wish List

Qty

$ 220.00 USD

Add to Wish List

Often overlooked but never counted out are charged airflow characteristics. The way air enters the engine dictates how well the engine breathes and has a direct effect on throttle response, turbo lag, and maximum power. Smooth bends and minimal restriction are ideal; however, increasing boost levels necessitates the use of superior materials that can hold up to the pressure. The FTP BMW N55 Charge Pipe both increases flow and improves the reliability of your twin turbo BMW. The 3" mandrel bent aluminum pipe replaces the brittle factory plastic pipe which can fail under increased boost pressure. The increased piping size helps to reduce turbulence and maximize flow into the engine. Increased Flow Direct OEM Replacement 3in Mandrel-Bent Aluminum Construction 4-Play Silicon Couplers

Show More Show Less

FTP Motorsport Boost Pipe - E9X E8X N55

T#:582436

Part#: SG71312-BP

Special Order: No Guaranteed ETA

$ 220.00

This product was last offered at the strikethrough price on
06-24-2026

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

Replace your failure prone factory BMW boost pipe with an FTP Motorsport aluminum piece. Stronger and more reliable than the OEM plastic piece that connects the intercooler to the turbo.

Project Cars

SELECT YOUR BMW

Charge Pipes & Turbo Inlets for BMW 1 Series E82 (2008-2013)

BMS Aluminum Performance Chargepipe w/ Tial BOV & Flange - N54 ...

BMS Aluminum Performance Upper Chargepipe - N55

Turner Motorsport N54 Silicone Turbo Inlet Hose Kit - Stock Location ...

Active Autowerke N54 Blow Off Valve Kit - E82 135i, 1M, E9X 335i ...

Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i ...

N55 Charge Pipe Upgrade

Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i ...

Phoenix Racing Aluminum Performance Chargepipe - N54

Phoenix Racing Aluminum Performance Chargepipe w/ Tial BOV Flange - N...

FTP Motorsport Lower Charge Pipe - E9X, E8X N54/N55

FTP Motorsport Charge Pipe - E9X E8X (N55)

FTP Motorsport Boost Pipe - E9X E8X N55

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results