Charge Pipes & Turbo Inlets for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

The factory BMW charge pipes are prone to cracking, as they are made from brittle plastic. Here at Turner, we sell several brands of replacement charge pipes that are typically made from cast aluminum. We recommend upgrading to hard charge pipes even on stock forced induction vehicles to avoid cracking - we've seen cracking occur on high mileage cars running stock power just as frequently as we do with high horsepower builds.
Sort By:
Turner Motorsport N54 Silicone Turbo Inlet Hose Kit - Stock Location - E9X E8X E89 N54
Turner Motorsport N54 Silicone Turbo Inlet Hose Kit - Stock Location ...
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:599103
Part#: TMSN54STIH
Ships on Dec 2, 2026
Sale - Save 20% $ 416.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 333.59 USD
Free Shipping
Add to Wish List
Sale - Save 20%
$ 416.99

This product was last offered at the strikethrough price on
06-14-2026

Starting at $ 333.59 USD
Free Shipping
Add to Wish List
If you have owned your BMW for any length of time, you are most likely aware of BMW's less-than-stellar reputation for developing weak plastic hoses and other parts. A great example of this are the N54 turbo inlet pipes. Over time, constant temperature swings cause these plastic pipes/hoses to become brittle. This often leads to cracks, splits, or even complete failure, allowing your turbos to suck in unfiltered air. To prevent this from happening to you, we are proud to present our very own Turner Motorsport N54 Silicone Turbo Inlet Hoses! Silicone inlet hoses are extremely reliable, resisting heat and pressure significantly better than plastic. This is perfect people who are just looking for a simple, reliable upgrade, or people who want to push the limits of their BMW and are looking to make more boost and more power without worrying about failing inlets. Available in two sizes, our kits can support either stock (44mm) or upgraded (50mm) turbos and include adapters to reconnect your turbo bypass pipes. If you plan to upgrade your charge pipes, replace the stock diverter valves with aftermarket atmospheric blow-off-valves, or want to convert your BMW to a catch can system, we also recommend the optionally available Turner Motorsport N54 Inlet Hose Plug Kit. This kit blocks off the turbo bypass pipe connections and PCV connections that will no longer be needed.
Show More Show Less
N55 Charge Pipe Upgrade
N55 Charge Pipe Upgrade
Active Autowerke - Corporate Logo
T#:341887
Part#: 135N55CP-KIT
Ships in 3 Business Days
$ 189.99 USD
Free Shipping
Add to Wish List
$ 189.99 USD
Free Shipping
Add to Wish List
Active Autowerke N54 Blow Off Valve Kit - E82 135i, 1M, E9X 335i
Active Autowerke N54 Blow Off Valve Kit - E82 135i, 1M, E9X 335i ...
Active Autowerke - Corporate Logo
T#:4416
Part#: AABOVKIT-N54
In Stock
$ 565.99

This product was last offered at the strikethrough price on
09-01-2026

$ 529.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
$ 565.99

This product was last offered at the strikethrough price on
09-01-2026

$ 529.99 USD
Limited Qty Sale
Free Shipping
Add to Wish List
As Used on Project E92 335i
When adding boost to the N54 engine, it's important to consider effects throughout the rest of the system. Additional boost can overwhelm the stock BMW diverter valve system and lead to boost leakage, or boost spikes, and lost horsepower. With the factory components in place it's hard to maintain consistently high boost levels. Instead of the weak plastic components of the stock system, Active Autowerke uses a CNC-machined and mandrel-bent aluminum tube with a Venturi blow-off valve in place of the original diverter valves. The blow-off valve dumps overboost into the atmosphere for that distinctive turbo 'whoosh' sound. The single AA BOV is over-sized for the N54 application - taking the place of the two small diverter valves, and verified to handle over 600hp. With the BOV acting properly your turbos and other components are protected from compressor surge caused by excess pressure build-up.

We like the Active BOV better than other forms of diverter and BOV kits because it's tried and true - AA was the original turbo BMW tuners and their experience is second to none. That's why they took the time to engineer their kit to fit perfectly, using the OE-type connector to the throttle body, and high-strength silicone to the lower intercooler tube. Each connection is a tight, leak-free seal. The kit comes complete with the discharge tube, vacuum plugs for the stock hoses, and instructions. The tube is powdercoated in black and with a wrinkle finish for an OE appearance.

This item fits the following BMWs with N54 engine:
2008-2010 E82 BMW 135i 1M
2007-2010 E90 BMW 335i 335xi 335i xDrive
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive
2007-2010 E93 BMW 335i
Show More Show Less
Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i
Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i ...
Active Autowerke - Corporate Logo
T#:340366
Part#: N55CP-KIT
Ships in 3 Business Days
Starting at $ 189.99 USD
Free Shipping
Add to Wish List
Starting at $ 189.99 USD
Free Shipping
Add to Wish List
One major weak point in the N55 turbo plumbing is the stock upper chargepipe from the intercooler outlet to the intake manifold. The original N55 charge pipe is made from a weak plastic and can fail with even stock boost levels. The most common problem is a crack that develops along a seam where the pipe connects to the throttle body. Any crack here is bad as it creates a massive vacuum leak and the engine electronics will put the car into limp mode. If you don't want to be sidelined there is a very simple fix - the Active Autowerke N55 charge pipe.

This aluminum pipe is much stronger and more durable and nearly indestructable for the N55 application. It uses a CNC-machined factory-style connection and o-ring to the throttle body to ensure a tight and leak-free seal. The piping is a consistent 3" diameter for better flow and an improved throttle response. AA has included a raised boss with two ports should you choose to add a water/meth injection system later. The factory MAP sensor installs in the same location and the pipe is powdercoated black for a factory-type appearance.

With a stronger pipe you don't have to worry about the infamous chargepipe crack and lost boost levels and horsepower. All of the boost in the world is useless if it's leaking so using beefed up components in place of the weak factory pieces is the smart way to consistently high power output.

This item fits the following BMWs with the N55 engine:
2011-2012 E82 BMW 135i
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2011-2013 E93 BMW 335i - Convertible
Show More Show Less
Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i
Active Autowerke N55 Chargepipe Upgrade - E82 135i, E9X 335i ...
Active Autowerke - Corporate Logo
T#:388675
Part#: 340366TCKD4AMN6T
Ships in 3 Business Days
$ 189.99 USD
Free Shipping
Add to Wish List
$ 189.99 USD
Free Shipping
Add to Wish List

Select Vehicle

BMW Mini
Clear Vehicle

Category

  • Charge Pipes & Turbo Inlets

Brand

Price

$
$

Special Offers