Oiling System for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Tasked with keeping everything properly lubricated, the oiling system is one of the most if not THE most fundamental parts of the engine. Make sure that everything is in good working order and flowing properly to ensure your engine has a long and trouble-free service life.

Sub-Categories

Sort By:

Oil Filter Housing Gasket Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5403248
Part#: 11427537293TMSKT
In Stock
$ 97.99

This product was last offered at the strikethrough price on
08-18-2026

$ 96.99 USD
Free Shipping
$ 96.99 USD
Free Shipping
Includes gaskets and hardware to replace both oil filter housing gaskets. Over time gaskets become dry and brittle allowing oil to leak in your engine compartment. Replace this gasket and stop having to top off your oil every month. A common source of leaks on the N54/55 is the gaskets between the the thermostat plate and filter housing, and also the filter housing to engine block.
Show More Show Less
Oil Pan Gasket - With Bolts
Bolts Are For Vehicles With Automatic Transmission ONLY
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5403247
Part#: 11132210959TMSKT
In Stock
Sale - Save 3% $ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.42 USD
Free Shipping
Sale - Save 3%
$ 81.99

This product was last offered at the strikethrough price on
05-03-2026

$ 79.42 USD
Free Shipping
Gasket between oil pan and engine block. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.
Goldenwrench Supply Co - Corporate Logo
T#:7244442
Part#: FXXOFH-R
Ships in 1-3 days
$ 147.00 USD
Free Shipping
$ 147.00 USD
Free Shipping
OEM factory oil filter housing caps are made of plastic which can be prone to failure over time. Bring form, function and design to your engine with GoldenWrench's highly anticipated 2022 product release. Introducing the BLACKLINE Performance RED Billet Oil Filter Housing Cap which is designed to increase the functioning longevity and improve aesthetics over the factory plastic part while offering superior built in maintenance features.
Show More Show Less

Advanced Auto Fabrication - Corporate Logo
T#:7624643
Part#: 116183
In Stock
$ 190.00 USD
Free Shipping
$ 190.00 USD
Free Shipping
Since 2010, Advanced Auto Fabrication has been producing and developing both parts and full fledged race cars. Their knowledge base covers a wide range of vehicles both domestic and imported. In the specific case of BMW, the team at AAF has a particular affinity for building and designing components for BMW race cars. This oil pan baffle by AAF keeps the oil at the pick up better than others on the market. Baffling the oil pan is extremely important. Under racing and track conditions, oil can move in the oil pan enough to cause extended moments of oil starvation. This can cause premature, and in some cases immediate, engine failure. The pan features a tight fit to keep oil from exiting under braking or cornering. A must have for all track cars. **Note: Requires Welding to install.
Show More Show Less

Goldenwrench Supply Co - Corporate Logo
T#:9901260
Part#: FXXOFH-G
In Stock
$ 147.00 USD
Free Shipping
$ 147.00 USD
Free Shipping

BMW Gray Filter Housing Cap - Blackline Performance Edition Oil is a premium upgrade designed to replace the standard OEM plastic oil filter housing cap. This high-quality billet aluminum cap enhances both the aesthetics and functionality of your BMW's engine.

  • Durable Construction: Made from 6061 T6 aluminum with a hard anodized finish for superior strength and longevity.
  • Improved Performance: Features better heat dissipation compared to the factory plastic cap, enhancing engine performance and reliability.
  • Enhanced Aesthetics: Adds a sleek, high-performance look to your engine bay with 3D precision post-milled detailing and the G Insignia Oil Filter Cage Stabilizer.
  • Easy Installation: CNC-formed hand grips and a 10mm Allen key maintenance port with a built-in scratch plate simplify the installation and maintenance process.
  • Direct Replacement: Retains the factory oil filter stalk and is compatible with BMW S55 and most N series engines using BMW part 11427525334.
  • Increased Longevity: Designed to increase the life span of your oil filter cap and provide a more reliable seal.
Show More Show Less
K&P Engineering - Corporate Logo
T#:402535
Part#: S38
Ships in 5 Business Days
$ 129.00 USD
Free Shipping
$ 129.00 USD
Free Shipping

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top tier product for your European vehicle.

Features:

  • Consistent filtering across entire filter surface
  • Superior ASTMF316 filtration performance
  • Magnetic Prefiltering
  • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
  • Easy inspection of engine contamination
  • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX 328i 328iX 335i 335iX 
2006 - 2013 E9X 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2010 - 2016 F10 5 Series Sedan 528i 528iX 530i 535i 535iX 
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 
2007 - 2010 E60 528i 528xi 535i 535ix 
2009 - 2016 E89 Z4 Roadster Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i 
2014+ F22 2 Series Coupe 228i 228iX M235i M235iX
2007 - 2013 E88 1 Series Convertible 128i 135i
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i
2007 - 2011 E70 X5 3.0sd X5 3.0si 

Show More Show Less

Radium Engineering - Corporate Logo
T#:577808
Part#: 20-0373
In Stock
$ 259.99 USD
Free Shipping
$ 259.99 USD
Free Shipping
Oil catch cans prevent elevated oil blow by caused by aggressive driving. The Radium Engineering catch can uses a closed loop system and is emissions and track legal, and by not venting to atmosphere avoids any oil smells from getting into the cabin. Kit includes Billet catch can Mounting bracket 10AN hose fittings and adapters 5/8" PCV hose Mounting hardware
Show More Show Less
Iwis - Corporate Logo
T#:36981080
Part#: 90001301
In Stock
$ 314.36

This product was last offered at the strikethrough price on
05-04-2026

$ 304.83 USD
Free Shipping
$ 304.83 USD
Free Shipping
Prevent costly failure with this IWIS Engine Oil Pump Chain Kit! This kit contains all of the basic items needed to service your oil pump drive system and prevent failure long before it occurs. Chains can stretch and chain guides and tensioners can wear out, leading to the chain skipping teeth. This prevents the oil pump from being driven at the proper speeds. If not addressed, the chain could begin to "slip" over the gears, failing to drive the oil pump. When this occurs, oil pressure will drop suddenly, failing to properly lubricate sensitive internal engine components such as main bearings, rod bearings, and camshaft ledges and lobes, resulting in severe scoring and eventual engine failure.
Show More Show Less

Oil Pan Gasket Replacement Kit
For vehicles with automatic transmission only
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:5403285
Part#: 11137548031TMSKT
Ships in 2 Business Days
Sale - Save 6% $ 201.99

This product was last offered at the strikethrough price on
09-03-2026

$ 188.99 USD
Free Shipping
Sale - Save 6%
$ 201.99

This product was last offered at the strikethrough price on
09-03-2026

$ 188.99 USD
Free Shipping
Includes new pan gasket, hardware and a oil service kit. A common piece to begin leaking on any engine, oil pan gaskets begin to leak after a few years.

AGA Tools - Corporate Logo
T#:5135644
Part#: AGA-CODP-12-15
Ships in 7 Business Days
$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping
Change the way you change oil
HARD Motorsport - Corporate Logo
T#:593621
Part#: OILADPTR
Special Order: No Guaranteed ETA
$ 62.00 USD
Free Shipping
$ 62.00 USD
Free Shipping
The HARD Motorsport Oil Cooler Fitting Adaptor Plate allows you to upgrade your oil cooler lines to a flexible braided hose that can be routed in any direction, giving the ability to upgrade or relocate your oil cooler. This kit replaces the oil cooler hard lines with two -10 AN fittings, mounting bracket, O-rings, and adaptor bracket, which is CNC machined stainless steel.
Show More Show Less