Flywheels for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

The factory BMW flywheel is a 2 piece design that mitigates vibration and creates a comfortable driving experience. A single piece aftermarket flywheel will allow the engine to rev quicker and gives shifting a much more direct and mechanical feel. This also makes clutch modulation on spirited takeoffs much easier and more predictable and is a must if you plan on tracking or competing in your BMW.
Sort By:
E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum Flywheel
E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum F...
JB Racing - Corporate Logo
T#:2801
Part#: 520-200-240
In Stock
$ 714.00 USD
Free Shipping
Add to Wish List
$ 714.00 USD
Free Shipping
Add to Wish List
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

Stock Flywheel Weight = 24-31.0lbs
JB Flywheel Weight = 12.0lbs

This item fits the following BMWs:
2006-2010 E60 BMW - 525i, 528i, 530i
2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
2007-2013 E82 BMW - 125i, 128i
2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
2009-later E89 BMW - Z4 3.0i
Show More Show Less
SPEC Billet Aluminum Single Mass Flywheel - E9X 335i, E82/88 135i, E60 535i
SPEC Billet Aluminum Single Mass Flywheel - E9X 335i, E82/88 135i, E6...
Fits cars with production date 2007 -01/2009, 8 bolt flywheel
Spec Clutches - Corporate Logo
T#:387322
Part#: SB53A-2
In Stock
$ 579.00 USD
Free Shipping
Add to Wish List
$ 579.00 USD
Free Shipping
Add to Wish List
Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration.
SPEC Single Mass Steel Flywheel - BMW E9X 335 2007-2009 (up to 1/2009)
SPEC Single Mass Steel Flywheel - BMW E9X 335 2007-2009 (up to 1/2009...
Fits cars with production date 2007 -01/2009 , 8 bolt flywheel
Spec Clutches - Corporate Logo
T#:341709
Part#: SB53S-2
Ships in 3 Business Days
$ 599.00 USD
Free Shipping
Add to Wish List
$ 599.00 USD
Free Shipping
Add to Wish List
These kits feature a non-SAC mechanism pressure plate, which , deviating from the original design, provides a lighter rotating assembly, higher rpm capability and greater clamp load levels. Required for the install is a billet rebuildable flywheel that features a lightweight, low MOI design and infinite rebuildability. The billet aluminum flywheel weighs 14lbs, and billet steel 22 lbs.
Show More Show Less
Spec SMF- STEEL (FOR USE WITH SPEC CLUTCH ONLY) N55
Spec SMF- STEEL (FOR USE WITH SPEC CLUTCH ONLY) N55
Spec Clutches - Corporate Logo
T#:597416
Part#: SB55S-2
Back Ordered
$ 599.00 USD
Free Shipping
Add to Wish List
$ 599.00 USD
Free Shipping
Add to Wish List
Clutch Masters Lightweight aluminum flywheel
Clutch Masters Lightweight aluminum flywheel
Clutch Masters - Corporate Logo
T#:559233
Part#: FW-033-AL
Ships in 8 Business Days
$ 658.99 USD
Free Shipping
Add to Wish List
$ 658.99 USD
Free Shipping
Add to Wish List

An excellent performance upgrade so you can enjoy quicker revs and eliminate excess turbo lag. Made of high quality 6061-T6 billet aluminum, with a high-carbon steel replaceable friction surface, this flywheel from Clutch Masters is sure to be a great upgrade for anyone looking to reduce crankshaft drag and increase acceleration.

Typical benefits of a Clutch Masters lightweight flywheel:

  • Reduced mass equals increased acceleration
  • CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels
  • CM uses an OE steel ring gear secured by bolts
  • CM offers a limited lifetime warranty
  • CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2
Show More Show Less
BMW E60 E9X XACT Flywheel Streetlite
BMW E60 E9X XACT Flywheel Streetlite
For vehicles with a 8 bolt flywheel and build date of 01/2009 or earlier
ACT - Corporate Logo
T#:637014
Part#: 601180
In Stock at Vendor
$ 944.00 USD
Free Shipping
Add to Wish List
$ 944.00 USD
Free Shipping
Add to Wish List

BMW E60 E9X XACT Flywheel Streetlite is an advanced performance flywheel engineered to offer substantial improvements over stock components. This lightweight flywheel is designed for durability and enhanced performance, making it an excellent choice for both street driving and drag racing.

  • Lightweight Construction: Significantly lighter than the stock flywheel, reducing rotational mass for improved engine response and acceleration.
  • Durable Design: Crafted for maximum strength, lower inertia, and excellent heat tolerance, ensuring long-lasting performance.
  • Versatile Use: Ideal for street or drag racing applications, providing reliable performance across various driving conditions.
  • Serviceable: Can be resurfaced, eliminating the need for additional parts and extending the lifespan of the flywheel.
  • Included Hardware: Comes with flywheel bolts (M12-1.5 X 30mm) for convenient installation.

Upgrade your BMW with the BMW E60 E9X XACT Flywheel Streetlite for enhanced performance and durability.

Show More Show Less
Clutch Masters Lightweight aluminum flywheel
Clutch Masters Lightweight aluminum flywheel
Clutch Masters - Corporate Logo
T#:567088
Part#: FW-075-AL
In Stock
$ 752.99 USD
Free Shipping
Add to Wish List
$ 752.99 USD
Free Shipping
Add to Wish List

An excellent performance upgrade so you can enjoy quicker revs and eliminate excess turbo lag. Made of high quality 6061-T6 billet aluminum, with a high-carbon steel replaceable friction surface, this flywheel from Clutch Masters is sure to be a great upgrade for anyone looking to reduce crankshaft drag and increase acceleration.

Typical benefits of a Clutch Masters lightweight flywheel:

  • Reduced mass equals increased acceleration
  • CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels
  • CM uses an OE steel ring gear secured by bolts
  • CM offers a limited lifetime warranty
  • CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2
Show More Show Less
Lightweight aluminum flywheel
Lightweight aluminum flywheel
Clutch Masters - Corporate Logo
T#:559242
Part#: FW-055-AL
Ships in 3 Business Days
$ 752.99 USD
Free Shipping
Add to Wish List
$ 752.99 USD
Free Shipping
Add to Wish List

An excellent performance upgrade so you can enjoy quicker revs and eliminate excess turbo lag. Made of high quality 6061-T6 billet aluminum, with a high-carbon steel replaceable friction surface, this flywheel from Clutch Masters is sure to be a great upgrade for anyone looking to reduce crankshaft drag and increase acceleration.

Typical benefits of a Clutch Masters lightweight flywheel:

  • Reduced mass equals increased acceleration
  • CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels
  • CM uses an OE steel ring gear secured by bolts
  • CM offers a limited lifetime warranty
  • CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2

 

For vehicles with production date up to 01/2009 

Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Shipping