BMW Suspension Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
KMAC Adjustable Rear Camber And Toe Bushings Set - E82, E89, E9X non-...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KMAC - Corporate Logo
T#:389667
Part#: 193926K
In Stock
13% off MSRP $ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
13% off MSRP
$ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
Rear adjustable camber and toe bushings for the E82/E9X non-M 3-series. These bushings allow you to adjust camber and toe beyond factory specs to either restore camber or add more. If you lowered your car and have too much camber these bushings can get you back to stock specs. On the flip side if you need more camber for the track or autocross, you can fine tune it with these too. These bushings press in and replace the existing rubber bushings. They are made from peformance urethane which will give more feedback and response to the driver. Sold as a set with a bushing extraction tool included.

Fits the following BMWs:
E82/88 BMW 2 Series
E89 BMW Z4
E9X BMW Non-M
Show More Show Less
Rear Subframe Bushing - Priced Each
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:599854
Part#: 33316758259
In Stock
$ 47.99

This product was last offered at the strikethrough price on
03-23-2026

$ 36.99 USD
Free Shipping on orders $49 and up
$ 36.99 USD
Free Shipping on orders $49 and up
The rear subframe bushings are vital to the performance and handling of your vehicle. Transfer of load and strain in the drivetrain and rear suspension rely on the subframe to do their job effectively. If the subframe bushings are worn, the transfer of power to the ground can be greatly compromised.
Show More Show Less

Meyle Front Strut Mount - E46 E60 E61 E63 E64 E82 E83 E88
For vehicles with production date from 04/2008
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:367404
Part#: 31336752735
Ships on Nov 18, 2026
$ 34.99 USD
Free Shipping on orders $49 and up
$ 34.99 USD
Free Shipping on orders $49 and up
Direct replacement strut mount with integrated bearing for precise steering feel.

Meyle Rear Lower Shock Mount - E82, E88, E90, E91, E92, E93
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:378339
Part#: 33526768544
Ships on Nov 12, 2026
$ 22.99 USD
Free Shipping on orders $49 and up
Recommended replacement when replacing shocks
Rear Subframe Bushing - Priced Each
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:20155624
Part#: 33316758260
In Stock
$ 52.99

This product was last offered at the strikethrough price on
03-26-2026

$ 37.99 USD
Free Shipping on orders $49 and up
$ 37.99 USD
Free Shipping on orders $49 and up
The rear subframe bushings are vital to the performance and handling of your vehicle. Transfer of load and strain in the drivetrain and rear suspension rely on the subframe to do their job effectively. If the subframe bushings are worn, the transfer of power to the ground can be greatly compromised.
Show More Show Less

Meyle Front Control Arm - Right - E82, E88, E90, E91, E92, E93 ...
The straight control arm
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:376685
Part#: 31126770850
In Stock
$ 111.35

This product was last offered at the strikethrough price on
06-16-2026

$ 76.99 USD
Free Shipping
$ 76.99 USD
Free Shipping
Includes bushing and ball joint assembly.
Meyle Front Control Arm - Left - E82, E88, E90, E91, E92, E93 ...
The straight control arm
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:376683
Part#: 31126770849
In Stock
$ 110.99

This product was last offered at the strikethrough price on
05-07-2026

$ 76.99 USD
Free Shipping
$ 76.99 USD
Free Shipping
Includes bushing and ball joint assembly.

KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
Trailing Arm Bushing
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594605
Part#: 33326763092
In Stock at Vendor
$ 16.99 USD
Free Shipping on orders $49 and up
$ 16.99 USD
Free Shipping on orders $49 and up
As your vehicle ages, rubber components begin to break down, allowing excess movement in the components that require a firm mounting point the most. If your rear end feels loose, or wanders over bumps, your rear trailing arm bushings may be to blame.
Show More Show Less
Rear Shock Absorber Dust Cover & Bump Stop Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Meyle - Corporate Logo
T#:40275186
Part#: 3147400007
Special Order: No Guaranteed ETA
$ 22.99 USD
Free Shipping on orders $49 and up
The MEYLE rear shock absorber accessory kit is the ideal choice for BMW enthusiasts looking to maintain or restore factory ride control without paying dealership prices.


Meyle Control Arm Bushing - BMW E82/E88 E9X Non-M
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:29201116
Part#: 3147100005
Special Order: No Guaranteed ETA
$ 19.99 USD
Free Shipping on orders $49 and up
If the control arm bushings on your vehicle are beginning to fail, it will become quickly apparent. Suspension noise will be drastically increased and the entire car will have an all-around looser feel. This can also lead to premature tire failure as alignment is negatively affected. Replace your control arm bushings to give your entire suspension a tighter feel.
Show More Show Less
Meyle Dust Boot Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Meyle - Corporate Logo
T#:40444307
Part#: 3146400018
Special Order: No Guaranteed ETA
$ 28.99 USD
Free Shipping on orders $49 and up
Safeguard your front shocks from grime, moisture, and road debris with this Meyle dust boot. Built to OE specifications, it helps prolong shock life and preserve smooth suspension performance—an easy, budget-friendly upgrade for long-term reliability.
Show More Show Less
Rear Lower Control Arm Balljoint - Outer
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594505
Part#: 33326792553
Special Order: No Guaranteed ETA
$ 21.99 USD
Free Shipping on orders $49 and up
This ball joint is located in the trailing arms.

Meyle Dust Boot Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Meyle - Corporate Logo
T#:40444311
Part#: 3146400013
Special Order: No Guaranteed ETA
$ 21.99 USD
Free Shipping on orders $49 and up
Protect your suspension with this Meyle front shock dust boot—precision-fit to OE specs for easy install and long-term reliability. It shields your strut from dirt, grime, and moisture, extending shock life and preserving that smooth, confident ride. A simple upgrade that pays off every mile.
Show More Show Less

Meyle Sway Bar Bushing - E61, E82, E88
For vehicles with M Sport suspension only
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:579348
Part#: 3146150024
Special Order: No Guaranteed ETA
$ 8.37 USD
Free Shipping on orders $49 and up
$ 8.37 USD
Free Shipping on orders $49 and up
Fits 12mm rear sway bar only
Inner Wishbone Control Arm Bushing - BMW E82/88 E9X RWD
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:36100161
Part#: 3146100001
Special Order: No Guaranteed ETA
$ 13.99 USD
Free Shipping on orders $49 and up
Replace your worn-out inner control arm bushing to restore suspension handling and feel.

Meyle Rear Upper Control Arm - E82, E88, E90, E91, E92, E93
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:377506
Part#: 33326777980
Special Order: No Guaranteed ETA
$ 77.99 USD
Free Shipping
$ 77.99 USD
Free Shipping
Control arm in the rear upper position in the rear suspension
Meyle Rear Toe Arm - E82, E88, E90, E91, E92, E93
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:377505
Part#: 33326763471
Special Order: No Guaranteed ETA
$ 42.99 USD
Free Shipping on orders $49 and up
Control arm in the rear lower position in the rear suspension

Rear Lower Control Arm Bushing - Inner
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:594503
Part#: 33326770829
Special Order: No Guaranteed ETA
$ 15.99 USD
Free Shipping on orders $49 and up
As your vehicle ages, rubber components begin to break down, allowing excess movement in the components that require a firm mounting point the most. The camber link allows fine adjustment of the rear camber. When the camber link bushings fail, the rear camber adjustment is compromised. The result is a loose feeling in the rear end, excessive tire wear, and a sacrifice in handling.
Show More Show Less

Meyle Dust Cover Kit
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Meyle - Corporate Logo
T#:40478106
Part#: 3146400007
Special Order: No Guaranteed ETA
$ 28.99 USD
Free Shipping on orders $49 and up
The Meyle 3146400007 Front Shock Dust Boot is a durable, OEM-style replacement designed to shield your suspension components from the elements. Precisely engineered for a perfect fit on your BMW’s front shocks, it blocks dirt, moisture, and debris, helping maintain smooth performance and extending strut life. Easy to install and built for longevity, it’s an essential upgrade for preserving your ride’s integrity.
Show More Show Less
| Dust cover kit, shock absorber BMW 7 (E65, E66) (07/01-12/09) ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Meyle - Corporate Logo
T#:40444309
Part#: 3146400014
Special Order: No Guaranteed ETA
$ 35.99 USD
Free Shipping on orders $49 and up
Protect your BMW’s suspension with this Meyle front shock dust boot. Built to OE specs, it guards your strut from dirt, debris, and moisture—helping extend shock life and preserve ride comfort. A smart, budget-friendly upgrade that delivers lasting value.
Show More Show Less