BMW Suspension Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

ST XTA Performance Coilover System - E82 - Adjustable Damping ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Suspension Techniques - Corporate Logo
T#:380132
Part#: 18220839KT
In Stock
$ 1,649.00 USD
$ 1,649.00 USD

Unleash top-tier performance with the ST XTA coilover designed for BMW enthusiasts seeking optimal driving behavior adjustments. Equipped with KW damper technology and an adjustable aluminum uniball top mount, this coilover allows precise tuning of camber and caster for your vehicle.

Benefits:

  • Utilizes KW damping technology for enhanced performance and longevity
  • Effective damping adjustment with reduced system friction
  • Lowering capability within the TüV-tested range of 1.4-2.4" front and rear
  • Thread adjustment on the front and rear axles for customized setup
  • Galvanized coilover struts with optimized corrosion protection coating
  • Complete solution with adjustable spring plate, race spring system, and dust-protected bumpers
  • Features aluminum adjustable uniball top mounts and scaled camber adjustment
  • Externally adjustable damping for fine-tuning driving dynamics
  • Backed by a 5-year limited warranty for peace of mind
Show More Show Less
ST X Performance Coilover System - fixed damping
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Suspension Techniques - Corporate Logo
T#:14618185
Part#: 13220039
Ships in 4 Business Days
$ 1,089.00 USD
Free Shipping
$ 1,089.00 USD
Free Shipping
average lowering of 1.4"-2.4"F, 1.4"-2.4"R
ST XA Performance Coilover System - Height And Rebound Adjustable - E...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Suspension Techniques - Corporate Logo
T#:599129
Part#: 18220039
Ships in 4 Business Days
$ 1,399.00 USD
Free Shipping
$ 1,399.00 USD
Free Shipping
Designed in conjunction with KW Germany, ST XA coilovers deliver a sporty handling by reducing the car’s bodyroll during compression as well as improving agility when driving fast. The high-quality production of each ST XA coilover includes a low-friction and pressure resistant housing alongside a chrome-plated piston rod for maximum longevity. A mono block guide and ST seal package ensures the twin-tube dampers remain free of dirt particles in all weather conditions.
Show More Show Less

ST XTA Plus 3 Coilover Kit - 3-Way Adjustable - BMW E82 128i 135i Cou...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Suspension Techniques - Corporate Logo
T#:5189135
Part#: 1820220839
Back Ordered
$ 2,799.00 USD
Free Shipping
$ 2,799.00 USD
Free Shipping
After the success of ST's XTA line of coilovers, it's no wonder ST decided to take things a step further with their all-new XTA Plus 3 coilovers. These new coilovers take many of the great features of the XTA line and integrated them in a package with significantly more control, allowing you to individually adjust 3 dampening settings, including High-Speed Compression, Low-Speed Compression, and Rebound dampening. This makes dialing in your preferred tack settings a breeze and allows for fine-tuned adjustment to suit any track conditions and racing styles! As an added bonus, this means even major vehicle modifications (such as heavy roll cages, bushing changes, altered wheel loads) can be taken into account when adjusting your coilovers to help you further maintain similar optimal handling characteristics.
Show More Show Less

Rogue Engineering Toe Arm Upgrade - E9X M3 & E82 1 M Coupe
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Rogue Engineering - Corporate Logo
T#:553830
Part#: RE.E9X.TA.M3
Ships in 8 Business Days
$ 289.00 USD
Free Shipping
$ 289.00 USD
Free Shipping

When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear. 

Features:

  • 100% machined and anodized, 6061-T6 lightweight aluminum arms
  • High-strength, 3-piece, rod end (with carbon fiber reinforced, PTFE race) offers longer life for street compared to standard rod ends
  • SEALS-IT Rod end seals keep dirt, water, and other contaminants out
  • Rod ends feature grease fittings, to allow for rod end serviceability.
  • Lighter than stock!  (Stock is 875g, RE arms are 640g)
  • Extremely easy installation and adjustment (your alignment shop will LOVE you!)
Show More Show Less
Rogue Engineering Toe Arm Upgrade V2 - E9X & E82 Non-M
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Rogue Engineering - Corporate Logo
T#:553834
Part#: RE.E9X.TA
Special Order: No Guaranteed ETA
$ 339.00 USD
Free Shipping
$ 339.00 USD
Free Shipping

Updated design!  Now shipping!

When an E9X is lowered beyond the limits of just lowering springs, the rear wheels toe-in excessively. This excessive rear toe leads to premature wear, that many people attribute to an increase in negative camber. It has become a common belief that an extremely low vehicle will wear the tires wrong as a matter of consequence. It has become standard practice to go as low as you can and proceed to replace your tires every five to ten thousand miles. Whats more is that when the vehicle reaches a certain ride height, the factory arms become maxed out and there is no way to compensate and dial in the proper toe. You're left with an improperly aligned vehicle that is in effect worse off than it was with the stock suspension installed.

This is not only uneconomical but improper and unsafe. ECS Tuning is proud to offer a solution for this problem in the form of Rogue Engineering E9X adjustable rear toe arms. These arms allow for greater toe adjustment on vehicles that have been lowered with a coilover suspension. With the toe set properly the tires can contact the road properly this maximizes grip and minimizes wear. 

Features:

100% machined and anodized, 6061-T6 lightweight aluminum arms (and collars).

Stainless hardware and spacers are perfect for the tough Northeast climate!

New!  Easy adjustment with 22mm open ended wrench and 5mm allen key!  It only requires 15 ft. lbs. on the clamp to secure the clamp!

New!  Included lock-out kit, replaces factory eccentric hardware.

Updated 3-piece rod ends features 4130 chromoly steel bodies, heat-treated, alloy steel races, and Teflon liners

Extremely easy installation and adjustment (your alignment shop will LOVE you!)

Show More Show Less

Rogue Engineering - E82/E9X Adjustable Rear Camber Link Set V2.0 ...
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Rogue Engineering - Corporate Logo
T#:35829340
Part#: RE_E9X_CAMNO
Ships in 8 Business Days
$ 595.00 USD
Free Shipping on orders $49 and up

Rogue Engineering E82/E9X Adjustable Rear Camber Link Set V2.0 is the ultimate upgrade for BMW enthusiasts seeking enhanced handling, improved tire wear, and precise suspension tuning. This high-performance solution is engineered to fit BMW E82 1-Series and E9X 3-Series models, offering superior adjustability and durability over OEM components. Ideal for street and track use, this camber link set is crafted from premium materials to ensure strength and long-lasting performance.

Key Features:

These replace the wishbone and guide arm links in the factory suspension which have rubber bushings and limited adjustment. Enhanced suspension adjustability for optimized alignment Improves handling and reduces uneven tire wear Compatible with BMW E82 1-Series and E9X 3-Series models Constructed from high-strength materials for durability and reliability Perfect for both street performance and track applications Turner Motorsport proudly offers the Rogue Engineering E82/E9X Adjustable Rear Camber Link Set V2.0, providing BMW drivers with unmatched performance and precision.

Show More Show Less
ST Adjustable Lowering Springs E82 1M E90 M3 E92 M3
affirm Starting At 0% APR - Subject To Eligibility. See Lending Terms
Suspension Techniques - Corporate Logo
T#:590293
Part#: 27320057
Back Ordered
$ 969.00 USD
Free Shipping
$ 969.00 USD
Free Shipping
Height Adjustable Spring kits are a great alternative to conventional springs