BMW Suspension Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:
Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair)
Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair...
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:11986
Part#: E9X-URSM
In Stock
Sale - Save 2% $ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 2%
$ 49.12

This product was last offered at the strikethrough price on
05-03-2026

$ 48.01 USD
Free Shipping on orders $49 and up
Add to Wish List
A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

Rear Shock Mount (RSM) Kit consists of:
A. rear upper-top shock mounts, 33506771737
B. rear upper-middle shock mounts, 33506767010
C. rear upper-bottom shock mounts, 33506771738
D. rear upper supporting cup, 33526764418 (sits over bumpstop)
There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

This item fits the following BMWs:
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2012 E93 BMW 328i 335i - Convertible
Show More Show Less
KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 ...
KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
Add to Wish List
$ 380.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
IRP Rear Lower Shock Mount Set - E8X E9X Non-M
IRP Rear Lower Shock Mount Set - E8X E9X Non-M
IRP - Individual Racing Parts - Corporate Logo
T#:587022
Part#: IRPRSM-90B
Ships in 4 Business Days
$ 195.00 USD
Free Shipping
Add to Wish List
$ 195.00 USD
Free Shipping
Add to Wish List
The stock rubber lower shock mounts tend to fail prematurely, especially when subjected to rough track conditions. These IRP lower shock mounts utilize a monoball design that is significantly stronger and helps to eliminate deflection that is caused by soft rubber. Key Benefits: Monoball rear lower shock mount eliminates unwanted deflection, maximizing shock efficiency and performance. Allows full shock body articulation for low friction movement and reduced side loading and improved shock wear. Designed to work with stock non-M taper seat stud style shocks (not M eyelet mount type). Maintains OE shock position
Show More Show Less
Set of Rear Lower Shock Mounts
Set of Rear Lower Shock Mounts
IRP - Individual Racing Parts - Corporate Logo
T#:7164814
Part#: IRPRSM-90PU
Ships in 2 Business Days
$ 141.99 USD
Free Shipping
Add to Wish List
$ 141.99 USD
Free Shipping
Add to Wish List
Rear Lower Shock Mounts - Set With Polyurethane Inserts BMW E8X, E9X (not M Models)
KMAC Adjustable Rear Camber And Toe Bushings Set - E82, E89, E9X non-M
KMAC Adjustable Rear Camber And Toe Bushings Set - E82, E89, E9X non-...
KMAC - Corporate Logo
T#:389667
Part#: 193926K
Ships on Sep 30, 2026
13% off MSRP $ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
Add to Wish List
13% off MSRP
$ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
Add to Wish List
Rear adjustable camber and toe bushings for the E82/E9X non-M 3-series. These bushings allow you to adjust camber and toe beyond factory specs to either restore camber or add more. If you lowered your car and have too much camber these bushings can get you back to stock specs. On the flip side if you need more camber for the track or autocross, you can fine tune it with these too. These bushings press in and replace the existing rubber bushings. They are made from peformance urethane which will give more feedback and response to the driver. Sold as a set with a bushing extraction tool included.

Fits the following BMWs:
E82/88 BMW 2 Series
E89 BMW Z4
E9X BMW Non-M
Show More Show Less
Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M
Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M ...
Macht Schnell - Corporate Logo
T#:4648679
Part#: 69.10.100
Ships in 10 Business Days
$ 289.00 USD
Free Shipping
Add to Wish List
$ 289.00 USD
Free Shipping
Add to Wish List
Macht Schnell's aluminum bushing kit will breathe new life into aging 1M's and M3's, affixing the car's rear subframe and differential to the chassis. Rubber subframe bushings in the E9x M3 and E82 1M from the factory are soft, and yield under hard driving resulting in ever-changing suspension geometry and alignment specs. By limiting the movement of both the car's subframe and differential, these solid bushings will give the rear of the car a tremendously planted and confident feel.
Show More Show Less
KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36...
KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Ships on Sep 18, 2026
$ 545.00 USD
Free Shipping
Add to Wish List
$ 545.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36...
KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
Add to Wish List
$ 545.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
IRP Performance Rear Lower Control Arm Bushing - Inner - 8x, E9x, F87 M2, F80 M3, F82 M4
IRP Performance Rear Lower Control Arm Bushing - Inner - 8x, E9x, F87...
The lowest arm housing the coil spring
IRP - Individual Racing Parts - Corporate Logo
T#:2408498
Part#: IRPRSB-9XMB2
Special Order: No Guaranteed ETA
$ 176.99 USD
Free Shipping
Add to Wish List
$ 176.99 USD
Free Shipping
Add to Wish List
Enhance road feel and keep your vehicle more planted with these upgraded aluminum bushings. Less play allows for more precise suspension articulation, making for a better performance driving experience.
Show More Show Less
IRP Polyurethane Subframe Bushing Set - 90A - E9X, E8X (non-M)
IRP Polyurethane Subframe Bushing Set - 90A - E9X, E8X (non-M) ...
IRP - Individual Racing Parts - Corporate Logo
T#:2408491
Part#: IRPRSB-90PU
Special Order: No Guaranteed ETA
$ 175.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 175.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Replacing your worn stock rubber subframe bushings with IRP's polyurethane bushing set will transform the way your car drives. Stiffer than stock, these bushings still absorb NVH which allows them to be comfortably used on the street without heavily reducing ride quality.
Show More Show Less
SPL Titanium Series Adjustable Rear Toe Arms With Eccentric Lockout Kit and Rear Upper Arm Links
SPL Titanium Series Adjustable Rear Toe Arms With Eccentric Lockout K...
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56001958
Part#: SPLRUAE9XKT2
Ships in 6 Business Days
New Item
$ 1,258.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 1,258.00 USD
Free Shipping on orders $49 and up
Add to Wish List
This premium SPL chassis upgrade kit is engineered to anchor your rear axle. Featuring SPL’s Titanium Series Rear Toe Arms with an eccentric lockout kit, alongside a complete 4 piece set of Rear Upper Wishbones and Guide Links
Show More Show Less
IRP Complete Front Drift Suspension Kit - E8X, E9X (NON M)
IRP Complete Front Drift Suspension Kit - E8X, E9X (NON M)
IRP - Individual Racing Parts - Corporate Logo
T#:2408486
Part#: IRPDK9X-1
Special Order: No Guaranteed ETA
$ 2,413.99 USD
Add to Wish List
$ 2,413.99 USD
Add to Wish List
Precision far beyond what the engineers at BMW had in mind, the IRP drift suspension kit allows you to adjust and fine tune your suspension perfectly for your drift setup. Features and specs: Drift kit is fully CNC machined from High Grade Billet Aluminium Increases steering angle up to ~66° 4 adjustable Ackerman positions Adjustable camber plates Easily accessible caster adjustment without disassembling the control arm Fits R18 or bigger wheels Kit Contents: 2pcs. Control arms 2pcs. Tie rods ends 2pcs. Camber plates 2pcs. Knuckles All necessary nuts, washers and bolts included **NOTE** THIS KIT REQUIRES: Use of front coilovers Front sway bar delete Longer than stock brake hoses Wider front fenders or overfenders
Show More Show Less
IRP Complete Front Drift Suspension Kit - E9X M3, E82 1M
IRP Complete Front Drift Suspension Kit - E9X M3, E82 1M
IRP - Individual Racing Parts - Corporate Logo
T#:2408489
Part#: IRPDK9X-1M
Special Order: No Guaranteed ETA
$ 2,550.00 USD
Add to Wish List
$ 2,550.00 USD
Add to Wish List
Precision far beyond what the engineers at BMW had in mind, the IRP drift suspension kit allows you to adjust and fine tune your suspension perfectly for your drift setup. Features and specs: Drift kit is fully CNC machined from High Grade Billet Aluminum Increases steering angle up to ~66° 4 adjustable Ackerman positions Adjustable camber plates Easily accessible caster adjustment without disassembling the control arm Fits R18 or bigger wheels Kit Contents: 2pcs. Control arms 2pcs. Tie rods ends 2pcs. Camber plates 2pcs. Knuckles All necessary nuts, washers and bolts included **NOTE** THIS KIT REQUIRES: Use of front coilovers Front sway bar delete Longer than stock brake hoses Wider front fenders or overfenders
Show More Show Less
IRP Aluminum Rear Subframe Bushing Set - E82, E9X (non-M)
IRP Aluminum Rear Subframe Bushing Set - E82, E9X (non-M)
IRP - Individual Racing Parts - Corporate Logo
T#:2408474
Part#: IRPRSB-90AL
Special Order: No Guaranteed ETA
$ 319.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 319.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.
Show More Show Less
IRP Aluminum Rear Subframe Bushing Set - E9X M3, E82 1M
IRP Aluminum Rear Subframe Bushing Set - E9X M3, E82 1M
IRP - Individual Racing Parts - Corporate Logo
T#:2408494
Part#: IRPRSB-90MAL
Special Order: No Guaranteed ETA
$ 294.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 294.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Aluminum subframe bushings prevent your subframe from shifting around as the chassis bends under load, unlike the stock rubber bushings. With only a slight increase in NVH, these aluminum bushings from IRP will keep the rear end of your BMW substantially more planted.
Show More Show Less
IRP Rear Adjustable Upper Control Arms
IRP Rear Adjustable Upper Control Arms
IRP - Individual Racing Parts - Corporate Logo
T#:2423565
Part#: IRPRSW-9XMMSR
Ships on Nov 6, 2026
Starting at $ 626.99 USD
Free Shipping
Add to Wish List
Starting at $ 626.99 USD
Free Shipping
Add to Wish List
Featuring Fluro Bearings

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping