BMW Suspension Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:
KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 ...
KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
Add to Wish List
$ 380.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
KMAC Adjustable Rear Camber And Toe Bushings Set - E82, E89, E9X non-M
KMAC Adjustable Rear Camber And Toe Bushings Set - E82, E89, E9X non-...
KMAC - Corporate Logo
T#:389667
Part#: 193926K
In Stock
13% off MSRP $ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
Add to Wish List
13% off MSRP
$ 480.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 417.00 USD
Limited Qty Sale
Free Shipping
Add to Wish List
Rear adjustable camber and toe bushings for the E82/E9X non-M 3-series. These bushings allow you to adjust camber and toe beyond factory specs to either restore camber or add more. If you lowered your car and have too much camber these bushings can get you back to stock specs. On the flip side if you need more camber for the track or autocross, you can fine tune it with these too. These bushings press in and replace the existing rubber bushings. They are made from peformance urethane which will give more feedback and response to the driver. Sold as a set with a bushing extraction tool included.

Fits the following BMWs:
E82/88 BMW 2 Series
E89 BMW Z4
E9X BMW Non-M
Show More Show Less
Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M
Macht Schnell Solid Aluminum Subframe Bushing Kit - E9X M3/E82 1M ...
Macht Schnell - Corporate Logo
T#:4648679
Part#: 69.10.100
Ships in 9 Business Days
$ 289.00 USD
Free Shipping
Add to Wish List
$ 289.00 USD
Free Shipping
Add to Wish List
Macht Schnell's aluminum bushing kit will breathe new life into aging 1M's and M3's, affixing the car's rear subframe and differential to the chassis. Rubber subframe bushings in the E9x M3 and E82 1M from the factory are soft, and yield under hard driving resulting in ever-changing suspension geometry and alignment specs. By limiting the movement of both the car's subframe and differential, these solid bushings will give the rear of the car a tremendously planted and confident feel.
Show More Show Less
KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36...
KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Ships on Sep 18, 2026
$ 545.00 USD
Free Shipping
Add to Wish List
$ 545.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36, E39 (not M5), E46 (not M3), E60, E82 (not 1M), E9X (not M3), Z3, MZ3, Z4
KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36...
KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
Add to Wish List
$ 545.00 USD
Free Shipping
Add to Wish List
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Category

Brand

Price

$
$

Shipping