BMW Suspension Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's handling is determined by the capabilities and age of your suspension components. Our selected aftermarket performance suspension like coilovers, lowering springs, cup kits, and dampers can improve the handling of your BMW dramatically. With those upgrades comes the needs for proper adjustment; our recommended supporting modifications comes stiffer sway bars, bushings, and adjustable camber/caster plates, to name a few found on this page. Completely build your suspension for the most competitive BMW driving experience, achieve your perfect look, or simply replace your worn suspension with our recommended parts.

Sub-Categories

Sort By:

Sway Bar Bushing Bracket (Rear)
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:37858397
Part#: 33556780707
In Stock
$ 21.99 USD
Free Shipping on orders $49 and up
$ 21.99 USD
Free Shipping on orders $49 and up
Rear sway bar crafted from durable stainless steel for superior strength and corrosion resistance, unlike OEM mild steel.
KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
KMAC - Corporate Logo
T#:389667
Part#: 193926K
Ships on Oct 2, 2026
$ 480.00 USD
Free Shipping
$ 480.00 USD
Free Shipping
Rear adjustable camber and toe bushings for the E82/E9X non-M 3-series. These bushings allow you to adjust camber and toe beyond factory specs to either restore camber or add more. If you lowered your car and have too much camber these bushings can get you back to stock specs. On the flip side if you need more camber for the track or autocross, you can fine tune it with these too. These bushings press in and replace the existing rubber bushings. They are made from peformance urethane which will give more feedback and response to the driver. Sold as a set with a bushing extraction tool included.

Fits the following BMWs:
E82/88 BMW 2 Series
E89 BMW Z4
E9X BMW Non-M
Show More Show Less

Rear Trailing Arm - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:637572
Part#: 33322406291
In Stock
$ 43.99 USD
Free Shipping on orders $49 and up

Front Tension Strut - Left
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:362915
Part#: 31126769801
Ships in 1 Business Day
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
Includes bushing and ball joint assembly.
URO - Corporate Logo
T#:593323
Part#: 33326782237
Ships in 1 Business Day
$ 33.99 USD
Free Shipping on orders $49 and up
Located in the upper front part of the rear suspension - includes bushings.

Front Tension Strut - Right
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:362914
Part#: 31126769802
Ships in 1 Business Day
$ 85.99 USD
Free Shipping
$ 85.99 USD
Free Shipping
Includes bushing and ball joint assembly.
Rear Upper Guide Rod - Right
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:587708
Part#: 33326782238
Ships in 1 Business Day
$ 36.99 USD
Free Shipping on orders $49 and up

Left Lower Control Arm - Priced Each
The straight control arm
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:373745
Part#: 31126770849
Ships in 1 Business Day
$ 56.99 USD
Free Shipping on orders $49 and up
$ 56.99 USD
Free Shipping on orders $49 and up
Front right control arm with factory installed bushing and ball joint.

URO - Corporate Logo
T#:592445
Part#: 33526768544
Ships in 1 Business Day
$ 32.99

This product was last offered at the strikethrough price on
05-07-2026

$ 31.99 USD
Free Shipping on orders $49 and up
$ 31.99 USD
Free Shipping on orders $49 and up
Recommended replacement when replacing shocks
Right Lower Control Arm - Priced Each
The straight control arm
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:373746
Part#: 31126770850
Ships in 1 Business Day
$ 66.99

This product was last offered at the strikethrough price on
05-07-2026

$ 48.99 USD
Free Shipping on orders $49 and up
$ 48.99 USD
Free Shipping on orders $49 and up
Includes bushing and ball joint assembly.
KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less


KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Ships in 8 Business Days
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
URO Spring Perch - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:567575
Part#: 31336764093
In Stock
$ 15.99 USD
Free Shipping on orders $49 and up
$ 15.99 USD
Free Shipping on orders $49 and up
Supports the front spring on the strut. Also known in the E30 community as an E90 drop hat.
URO - Corporate Logo
T#:639538
Part#: 33506771738
Ships in 1 Business Day
$ 5.99 USD
Free Shipping on orders $49 and up
$ 5.99 USD
Free Shipping on orders $49 and up
Replace your shock mount each time you replace your shocks to reduce noise and vibrations from the road and suspension system. Failing shock mounts may also end up leading to knocking and rattling sounds coming from the rear suspension. URO Parts is one of the leading manufacturers of high quality direct replacement aftermarket components, covering a wide range of makes and models. All of their replacement parts are manufactured to ISO 9000 certification standards, so you can expect long lasting performance from URO Parts. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less

Control Arm Bushing Kit
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:639170
Part#: 31120398350
In Stock
$ 51.99 USD
Free Shipping on orders $49 and up
If the control arm bushings on your vehicle are beginning to fail, it will become quickly apparent. Suspension noise will be drastically increased, there will be steering wheel shake when hitting road hazards, and the entire car will have an all around loose feel. This can also lead to premature tire failure as alignment is negatively affected. Replace your control arm bushings to give your entire suspension a tighter feel.
Show More Show Less

URO Control Arm Bushing for E82, E88, E9x
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:37959693
Part#: 33326792553
Ships in 1 Business Day
$ 14.99 USD
Free Shipping on orders $49 and up
Over time bushing crack dry rot and deteriorate, replace these bushings to restore your vehicle's original handling feel. Each vehicle requires two!
Front Wheel Bearing Housing - Right
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:37757296
Part#: 31216793924
Ships in 1 Business Day
$ 260.99 USD
Free Shipping on orders $49 and up
Steering Knuckle to replace your damaged or even failed knuckle to regain the handling of your vehicle.

Rear Sway Bar End Link - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:375916
Part#: 33556764428
Ships in 1 Business Day
$ 18.99 USD
Free Shipping on orders $49 and up
If the sway bar links are broken or worn, the system doesn't work as it should. Replace your end links with one from URO and get all the performance characteristics back.
Vargas Double Adjust Drag Shock Kit - BMW E9X 3
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51778132
Part#: VTT-E9/8X-DRAG-S
Ships in 10 Business Days
New Item
Sale - Save 15% $ 1,104.99

This product was last offered at the strikethrough price on
09-03-2026

$ 939.24 USD
Free Shipping
Sale - Save 15%
$ 1,104.99

This product was last offered at the strikethrough price on
09-03-2026

$ 939.24 USD
Free Shipping
The VTT BMW E9X/E8X Double Adjust Drag Shock Kit is the ultimate suspension upgrade for serious enthusiasts looking to shave seconds off their ET.

URO Rear Bump Stop - E82 E88 E90 E92 (Standard Suspension)
For vehicles with standard suspension only
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:639559
Part#: 33536767334
Ships in 1 Business Day
$ 10.99 USD
Free Shipping on orders $49 and up
$ 10.99 USD
Free Shipping on orders $49 and up
URO Parts is one of the leading manufacturers of high quality direct replacement aftermarket components, covering a wide range of makes and models. All of their replacement parts are manufactured to ISO 9000 certification standards, so you can expect long lasting performance from URO Parts. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less

Sway Bar Bushing - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:372642
Part#: 31356765574
In Stock
$ 8.54 USD
Free Shipping on orders $49 and up
As a bushing deteriorates, so does the functionality of the sway bar. With more play, the anti-roll stiffness the sway bar provides decreases, allowing more body roll and poor handling.