Home
Wheels
Wheel Bolts & Stud Conversions

BMW Wheel Bolts, Wheel Studs and Nuts for BMW 1 Series E82 (2008-2013)

Any time you use a wheel spacer you MUST have a longer wheel bolt or wheel stud to properly fasten the wheel to the hub. We offer extended wheel spacer bolts in silver and black finish in a variety of lengths to fit many spacer sizes. We're up to date on the different thread sizing as well - 12x1.5, 14x1.25, and 14x1.5 so we can supply wheel bolts for just about any BMW or MINI.

Add the spacer thickness to your stock bolt length and that is your ideal extended bolt length. We generally sell bolts by spacer thickness but there may be exceptions. It's always best to measure from the wheel bolt you're currently using. When we list the total length of a bolt it's from the base of the mounting seat to the tip. To be considered safe, a 12x1.5 wheel bolt needs 10mm (6.5 turns) of thread engaged; a 14x1.25 or 14x1.5 bolt needs 12mm (9.0 and 7.5 turns) of engaged thread.

Sort By:

APEX M12x1.5mm BMW 5 Lug Stud Kit - Hex head Black Finish - 75mm Leng...

2X Entries Into Our F80 M3 Sweepstakes

T#:637384

Part#: APEXM12STDKIT5HX

Ships in 2 Business Days

$ 160.00 USD

Add to Wish List

Qty

$ 160.00 USD

Add to Wish List

VTT M12 Titanium Wheel Stud Kits

2X Entries Into Our F80 M3 Sweepstakes

T#:7292019

Part#: TISTUD20125

In Stock

Sale - Save 7% $ 335.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 311.99 USD

Add to Wish List

Sale - Save 7%

$ 335.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 311.99 USD

Add to Wish List

VTT is proud to offer Titanium wheel stud kits for the vehicle owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. VTT kit details are as follows: Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength Grade 5 Titanium nuts with 60-degree cone seat to fit most all aftermarket wheel applications M5 Hex for easy installation Three Colors Available – Raw, Black, Burnt M12x1.5x75mm This fits all M12x1.5 applications Installation notes: Apply locktite to the studs (short end) and torque to 20 ft/lb. Lug nuts should be torqued to factory specifications. For safety retorque all hardware (studs and nuts) after 25-50 miles.

Show More Show Less

Fall-Line Motorsport E9X M3 / E82 1M Motorsport Hub Retrofit Kit ...

T#:28038193

Part#: FLM-E9XM-1BHUB

Ships in 3 Business Days

$ 1,695.00 USD

Add to Wish List

Qty

$ 1,695.00 USD

Add to Wish List

*MADE TO ORDER; ALLOW 2-3 BUSINESS DAYS* The E9X M3 / E82 1M have unquestionably become modern-day icons for their formidable street and track dominance. Both of these cars are equipped with M12x1.5 hardware from the factory, leaving them precariously prone to failure during rigorous track sessions and consequently, a potentially dangerous and damaging fate. Fall-Line Motorsport has developed a hub retrofit kit that will convert your E9X M3 / E82 1M to the more robust M14x1.25 hardware as well as shave rotational mass from each corner. OE M12x1.5 Front Hub Assembly: 3293g FLM M14x1.25 Front Hub Assembly: 2957g (-0.74lbs per corner) OE M12x1.5 Rear Hub Spindle: 1686g FLM M14x1.25 Rear Hub Spindle: 1441g (-0.54lbs per corner) Each hub kit comes pre-assembled, moly-coated, and includes everything you'll need for a truly plug and play retrofit*, including all new hardware. NOTE: *OEM rotor hats and select aftermarket solutions may require drilling out rotor hats to accommodate M14 hardware. Please also verify your desired wheel set can accept M14. Stud Kit pictured is sold separately. What is moly coating? Molybdenum Disulfide Coatings (MoS2 coatings), also known as Moly Coatings, are a dry film lubricant that are commonly used in applications where load carrying capacity, operating pressure and coefficient of friction are primary concerns. This coating provides effective lubrication in a wide range of loads, in many cases exceeding 250,000 psi. Moly coatings lubricate sacrificially by transferring lubricant between the two mating surfaces, which helps to reduce wear and coefficient of friction.

Project Cars

SELECT YOUR BMW

BMW Wheel Bolts, Wheel Studs and Nuts for BMW 1 Series E82 (2008-2013)

APEX M12x1.5mm BMW 5 Lug Stud Kit - Hex head Black Finish - 75mm Leng...

VTT M12 Titanium Wheel Stud Kits

Fall-Line Motorsport E9X M3 / E82 1M Motorsport Hub Retrofit Kit ...

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results