BMW Performance Chips & Software for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Performance tuning for your BMW gives it more efficient and effective ECU mapping which favor power delivery over comfort. BMW tuning legend Jim Conforti produces incredible software tunes for nearly every model to give drivers a noticeable upgrade in their car's capabilities. The Turner Chips, Shark Injectors, Sprint Boosters, and Burger Motorsports tuning software and handheld devices are all right here for you to give your BMW the engine management change it deserves.

Sub-Categories

Sort By:

MHD Tuning - Corporate Logo
T#:9126157
Part#: MHDWIRELESSV2
In Stock
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping

The new MHD Wireless OBDII WiFi Flash Adapter V2 allows you to reliably load flash maps to your BMW including JB4 back-end flash maps faster and easier than ever before. Just pair it with your Android or Apple phone and plug it into the OBDII port when you want to flash or use any MHD features. Compatible with E, F, or G Chassis BMWs with the following engines: N54, N55, S55, B58, S58, S63, & N13

NOTE: Additional engines & vehicles may be supported with Non-MHD applications such as Bimmercode or xHP. If your engine is not listed above, please check with the app you intend to use for compatibility with your vehicle.

MHD Flash Adapter Features & Benefits

Compatible with the MHD Flashing Platform,  BimmerCode, xHP, and many other wifi diagnostic apps

Load both MHD off-the-shelf maps and custom flash maps (available for limited applications - N54, N55, S55, B58, S58, S63, N13)

Faster flash times compared to wired OBDII cable

Uses Wifi for a reliable connection

Applications

E Chassis BMW

F Chassis BMW

G Chassis BMW

BimmerCode App & Info

All you need for coding your car with BimmerCode is one of the supported MHD OBD adapters and the BimmerCode phone app - https://bimmercode.app/

Show More Show Less
THOR - Corporate Logo
T#:568728
Part#: OBD2WIFI1
In Stock
$ 58.99 USD
Free Shipping
$ 58.99 USD
Free Shipping
With the advent of quick flash software and the increasing popularity of DME re-coding, having the proper interface has never been more crucial. Until now, many have resorted to chains of OBD-USB-Mini USB as the primary method of talking with the cars computer. While this is certainly functional, the user is limited by the length of the cable he or she purchased. Forget about setting your laptop on the workbench...slide that seat back, get cozy and don't you dare shake that cable... Those days are over. Enter the THOR OBDII WIFI dongle. This revolutionary little box is not only compatible with a host of tuning apps including XHP and THOR; but also completely functional with INPA, Tool32, NCSExpert, and WinkFP. Gone are the days of sitting in the driver's seat with your phone or laptop, now you can flash and code from the workbench or your couch if so choose. Clear a spot in the bottom of your toolbox for those amazon cables, you won't be needing them anymore. Features: Reliable, strong WiFi signal Faster flash-times, compared to standard OBD/INPA cable Tested and proven to perform flawlessly and built to last
Show More Show Less
Motiv Motorsports - Corporate Logo
T#:17970629
Part#: RFXF02UI6
In Stock
$ 859.00 USD
Free Shipping on orders $49 and up
The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.
Show More Show Less

Motiv Motorsports - Corporate Logo
T#:28537533
Part#: 101-0216
In Stock
$ 105.00 USD
Free Shipping on orders $49 and up

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

  • Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
  • Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
  • Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
  • High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

Kies Motorsports - Corporate Logo
T#:4319895
Part#: KIES07-WIFI-AD
In Stock
$ 99.99 USD
Free Shipping
$ 99.99 USD
Free Shipping
A Wireless ENET Adapter tool, powered directly by your OBD!
Motiv Motorsports - Corporate Logo
T#:29101684
Part#: 900.1001
In Stock
$ 729.00 USD
Free Shipping on orders $49 and up
The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.
Show More Show Less

Motiv Motorsports - Corporate Logo
T#:29234298
Part#: 910.1011
In Stock
$ 479.00 USD
Free Shipping on orders $49 and up
The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.
Show More Show Less
Fuel-It! - Corporate Logo
T#:589404
Part#: N54-PORTINJCONMO
In Stock
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
Fuel-It! CANfuel allows your ECU to control up to 8 fuel injectors sequentially in addition to an ethanol content sensor, low fuel pressure sensor, extra pressure sensors, EGT probes, external fuel pumps, and much more.
Show More Show Less

RaceChip Tuning Module - N55 F Chassis
BMW used two different engine harnesses, please confirm if you have type A or B before ordering
Race Chip - Corporate Logo
T#:641521
Part#: RACECHIPN55
Ships in 5 Business Days
Starting at $ 239.00 USD
Free Shipping
Starting at $ 239.00 USD
Free Shipping
BMW used two different engine harnesses, please confirm if you have type A or B before ordering. It’s sufficient to locate only one of the sensors because the plug type is always the same for both of them (pictured above in the second photo). Harness Type A - Third Photo/Harness Type B - Fourth Photo RaceChip is the largest chip tuning company in the world! Their products are made in Germany and rigorously tested on the Autobahn. RaceChip offers the next generation of performance tuning. It allows for up to 30% more Horsepower and 20% better Gas Mileage with a very simple installation process. Unlock the untapped performance of your BMW engine with peace of mind from RaceChip. S: 5 Tune Mappings +51 HP +70 lb-ft Torque Up to +15% MPG Includes everything you need for installation, down to the cable ties. RS: 6 Tune Mappings +63 HP +88 lb-ft Torque Up to +20% MPG Includes everything you need for installation, down to the cable ties. GTS: 7 Tune Mappings +77 HP +105 lb-ft Torque Up to +20% MPG Limited 2 year engine warranty Built in warm-up timer One time reprogramming if used on different vehicle Includes everything you need for installation, down to the cable ties. XLR Throttle Controller: RaceChip developed the new XLR to increase responsiveness on the road. Their innovative throttle tuning system lets you tune your engine’s reactions to your taste – choose from 7 separate stages (Eco+, Eco, Neutral, Sport, Sport+, Race, and Race+). Your engine’s performance isn’t affected by RaceChip XLR, but you can access it more immediately and directly. Experience significantly sharper responses for yourself – no waiting for the message to get through or frustrating “pauses for thought”. And the best thing: installation is simple and requires no specialist knowledge. Try it now! The Brainbox: The Brainbox is the nerve center of XLR and controls the processes needed to optimize throttle response. The Brainbox’s compact size (ca. 70 x 80 mm) allows it to be fitted easily in the footwell of your vehicle. As it is so flat, it does not restrict the driver’s legroom at all. It can be fixed almost anywhere in the footwell, for example in existing slots or vents. The Controller: The XLR Controller allows you to choose between 7 stages: Eco+, Eco, Neutral, Sport, Sport+, Race and Race+. Each stage sharpens your car’s throttle response a little more, until in Race+ it’s like a thoroughbred sports car. You can mount the Controller anywhere in the car so that it’s in the right place for how you want to use it. The size and design mean it fits right in with the rest of the interior and the other control elements.
Show More Show Less

AFE - Corporate Logo
T#:44359952
Part#: 77-20007
In Stock
$ 268.00 USD
Free Shipping on orders $49 and up
No more throttle lag!
Sprint Booster - Corporate Logo
T#:391871
Part#: SBBM1003
Ships on Sep 25, 2026
Starting at $ 289.99 USD
Free Shipping
Starting at $ 289.99 USD
Free Shipping
When BMW began using the "Drive-by-wire" throttle system in 2001, a lot of people cringed. The Drive-by-wire system uses electronics to replace the mechanical cable throttle of the past. This means the electronics between the accelerator pedal and motorized throttle must interpret what your right foot does, and ultimately decides how the engine will respond. Although advanced in it's technology and engineering, many of us agree that the Drive-by-Wire equipped BMWs feel unresponsive and lack the crisp, sharp throttle response that older BMWs had with a traditional throttle cable. That's where the Sprint Booster comes in.
Show More Show Less


Sprint Booster - Corporate Logo
T#:391869
Part#: SBBM0003S
Special Order: No Guaranteed ETA
$ 289.99 USD
Free Shipping
$ 289.99 USD
Free Shipping
Designed specifically to enhance acceleration in a number of popular platforms, the Sprint Booster is an aftermarket electronic module that plugs in between the accelerator pedal and the engine control unit (ECU) in vehicles equipped with an electronic throttle control. V3 Features: 3 Acceleration modes 36 Acceleration programs (18 manual & 18 auto) Pedal lock mode - deactivate the acceleration ability of the vehicle when it’s stationary through a 3 digit PIN Valet mode - limits the acceleration of the vehicle by 55 % – 65% – 75% (comes in 3 selectable levels) Ultra-compact size / New Design Up to 3 microprocessors Plug n play installation
Show More Show Less
Race Chip - Corporate Logo
T#:38688929
Part#: 999982BMW
Special Order: No Guaranteed ETA
$ 259.00 USD
Free Shipping on orders $49 and up
With the RaceChip XLR5, you can easily tune your car's throttle response via app to your taste – from a comfortable sedan to a racy sports car. That makes it the perfect add-on to our chip tuning boxes.
Show More Show Less
Motiv Motorsports - Corporate Logo
T#:29267513
Part#: 400.1001
Ships Today
$ 15.00 USD
Free Shipping on orders $49 and up

Race Chip - Corporate Logo
T#:5608779
Part#: RACECHIPF821M
Ships in 5 Business Days
Starting at $ 349.00 USD
Free Shipping
Starting at $ 349.00 USD
Free Shipping
RaceChip is the largest chip tuning company in the world! Their products are made in Germany and rigorously tested on the Autobahn. RaceChip offers the next generation of performance tuning. It allows for up to 30% more Horsepower and 20% better Gas Mileage with a very simple installation process. Unlock the untapped performance of your BMW engine with peace of mind from RaceChip. S: 5 Tune Mappings +48 HP +60 lb-ft Torque Up to +15% MPG Includes everything you need for installation, down to the cable ties. RS: 6 Tune Mappings +58 HP +65 lb-ft Torque Up to +20% MPG Includes everything you need for installation, down to the cable ties. GTS: 7 Tune Mappings +69 HP +78 lb-ft Torque Up to +20% MPG Limited 2 year engine warranty Built in warm-up timer One time reprogramming if used on different vehicle Includes everything you need for installation, down to the cable ties. XLR Throttle Controller: RaceChip developed the new XLR to increase responsiveness on the road. Their innovative throttle tuning system lets you tune your engine’s reactions to your taste – choose from 7 separate stages (Eco+, Eco, Neutral, Sport, Sport+, Race, and Race+). Your engine’s performance isn’t affected by RaceChip XLR, but you can access it more immediately and directly. Experience significantly sharper responses for yourself – no waiting for the message to get through or frustrating “pauses for thought”. And the best thing: installation is simple and requires no specialist knowledge. Try it now! The Brainbox: The Brainbox is the nerve center of XLR and controls the processes needed to optimize throttle response. The Brainbox’s compact size (ca. 70 x 80 mm) allows it to be fitted easily in the footwell of your vehicle. As it is so flat, it does not restrict the driver’s legroom at all. It can be fixed almost anywhere in the footwell, for example in existing slots or vents. The Controller: The XLR Controller allows you to choose between 7 stages: Eco+, Eco, Neutral, Sport, Sport+, Race and Race+. Each stage sharpens your car’s throttle response a little more, until in Race+ it’s like a thoroughbred sports car. You can mount the Controller anywhere in the car so that it’s in the right place for how you want to use it. The size and design mean it fits right in with the rest of the interior and the other control elements.
Show More Show Less