BMW Drivetrain Parts for BMW 1 Series E82 (2008-2013)

Enhance the performance of your stick shift BMW with the BMS clutch valve, a must-have upgrade for serious BMW enthusiasts. This high-performance replacement replaces the factory clutch delay valve, resulting in quicker shifts, longer clutch life, and improved 0-60 times. Designed with CNC machined precision, it installs quickly using factory-like connections with no modifications required. Made in the USA, this clutch valve is essential for maximizing the driving experience of your BMW.

Benefits:

• Replaces factory clutch delay valve for improved performance
• Quicker shifts and improved 0-60 times
• Longer clutch life
• Easy installation with factory-like connections
• Made in the USA

Turner Motorsport Dual Shear Selector Rod (DSSR)

Enhance your N54-equipped 135i or 335i’s driving feel with the Turner Motorsport DSSR. Designed to give your shifter a much more precise and solid connection, this DSSR replaces the OEM selector rod, eliminating the play and deflection that come from single-shear designs. Pair it with a Turner short-shift kit for the ultimate shifting upgrade.

Think of the DSSR as a major upgrade from the single-contact OEM rod, much like riding a bike with two hands instead of one: you have stronger, more precise control over each gear change. With its dual-contact setup, the DSSR “sandwiches” both sides of the shifter and transmission, creating a direct link that feels solid, eliminating the vague and sloppy feel of the factory setup.

Key Benefits:

Enhanced Precision: Significantly reduces deflection and play, giving you a more connected feel while shifting Compatible with Factory & Aftermarket Shifters: Perfect for custom setups as well as stock configurations Durable Build: Fabricated from high-quality 303 stainless steel, offering rust resistance and longevity Complete Hardware Included: Comes with zinc-plated hardware for a secure installation Specifications:

Material: 303 stainless steel construction Compatibility: Replacement for part #25117524722 (E8X/E9X N54 models) Installation Design: Two-piece assembly with captive pins, designed for simple alignment and adjustability Fitment: Specially engineered to fit the tight N54 carrier without interference Installation Tips:

Remove your factory selector rod and take note of its orientation. Attach the DSSR to both the transmission selector joint and lower shift lever. Shift to 3rd or 5th gear for maximum access to the supplied hardware, then secure tightly.

Turner Motorsport Polyurethane Shifter Arm Bushing

Want more responsive and accurate shifts without sacrificing comfort? The Turner Motorsport Polyurethane Shifter Arm Bushing is the perfect enhancement to reduce unwanted movement and play in the shift arm assembly. Factory rubber bushings absorb vibrations for smoothness but compromise direct feedback and often wear out, leading to sloppy, imprecise shifting.

Crafted from high-performance polyurethane with a corrosion-resistant 304 stainless steel sleeve, this bushing maintains stability without stretching or wearing out like rubber. Experience the tactile feel of more precise shifts, with minimal NVH (Noise, Vibration, and Harshness) added to your drive. A must-have for any driver looking to take control of their BMW's performance.

Key Features:

Precision Control: Firmer than factory rubber for a crisp, responsive shifter feel Long-Lasting Materials: Made with durable 70a polyurethane and a 304 stainless steel mounting sleeve Easy Installation: Direct replacement—no modifications needed OEM Compatibility: Replaces BMW part numbers 25111222015 and 25111222652 Specifications:

Material: High-quality 70a polyurethane and 304 stainless steel Made in the USA: Proudly manufactured with quality materials Durability: Improved lifespan over factory rubber bushings, reducing slop and enhancing gear engagement

Revamp your BMW's shifting experience with the Turner Motorsport Double Adjustable Short Shift Kit, a solution to the historically long throw shifters. Turner's short shifters offer height and throw adjustability, allowing drivers to discover their ideal driving sweet spot.

Curious about the long shifter? Turner's rally lever extension, available separately, provides a Quick Change option, simplifying the transition between long and short levers. Whether for track, weekend adventures, or daily commuting, Turner's short shifter kit caters to diverse driving needs.

Installing this kit is a breeze compared to competitors, thanks to the custom bearing cup that enables easy installation from inside the car. Enjoy the benefits of adjustable throw, ultra-crisp shifter feel, and an engaging driving experience.

Key Features:

• Adjustable throw from conservative to ultra-short
• Ultra-crisp shifter feel for quicker, precise shifts
• Easy installation with custom bearing cup
• Quick Change option for rally lever extension
• Independently adjustable knob height
• 22mm adjustment range for fine-tuning shifter throw
• CNC machined for durability and corrosion resistance

Upgrade further with the Turner Weighted Shift Knob - a 6-speed coin-designed knob that enhances the shifting experience with added weight, resulting in faster engagement and overall improved shifting.

Turner Weighted Shift Knob Features:

• Anodized billet aluminum core
• Durable Delrin outer construction
• Weighs 340g (11.99oz) for enhanced shift feel
• Anodized billet shift boot collar with Turner logo

For a comprehensive shifter makeover, pair the knob with Turner's short shift kits. The knob, carefully crafted from billet 6061-T6 aluminum, is CNC machined for precision fit and finish, anodized for durability, and designed for seamless compatibility with OE BMW shift knobs.

Elevate your lifting experience with the Schwaben Long Low Profile - High Lift Floor Jack. Certified for excellence and designed with a keen understanding of European car enthusiasts' needs, this jack is a testament to precision, durability, and performance. Don't compromise on quality—choose the Schwaben advantage for all your lifting endeavors.

Designed with precision, crafted for performance, and backed by our lifetime replacement program, the Schwaben Long Low Profile - High Lift Floor Jack is a must-have tool for every European car aficionado. This jack is engineered to cater to the unique needs of low ground clearance vehicles, ensuring that your prized possessions are lifted with care and precision.

Key Features:

• One Pump Reach: With its innovative one-pump feature, this floor jack effortlessly reaches contact on most cars, streamlining your lifting process.
• Low Profile Advantage: Boasting a mere 2-3/4" low height and a deep-reach lift arm, this jack is tailored for those sports cars and luxury vehicles that ride close to the ground.
• Hydraulic System Protection: The dual pump pistons are expertly shielded to thwart contaminants from compromising the hydraulic system's integrity.
• Built for Durability: Crafted with heavy gauge construction and fortified with rolled edges, this floor jack guarantees unwavering strength and longevity.
• Precise Control: The U-Joint release mechanism offers meticulous control over load descent at any handle position, ensuring the safety of both you and your vehicle.
• Maneuverability Redefined: Upgraded casters allow seamless maneuverability and effortless positioning of the jack, empowering you to find that perfect lifting spot.
• Safety First: The internal by-pass valve prevents over-pumping, shielding the hydraulic system from stress-induced issues.
• Vehicle Protection: A full cover rubber saddle pad and a protective foam cover on the handle are in place to prevent any unintended damage during the lifting process.
• Impressive Capacity: With a remarkable 4000 lb. capacity, this jack is ready to tackle a range of European vehicles.
• LIFETIME REPLACEMENT: Like almost all Schwaben products, this jack is backed by our lifetime replacement program in case anything goes wrong!

Specifications:

• Min Height: 2-3/4"
• Max Height: 24"
• Handle Length: 49-1/4"
• Jack Body Length: 35"
• Length from Pivot Point to Center of Jack Pad: 22"
• Front Casters: 2-1/2" diameter x 2" width
• Saddle Diameter: 4" with full saddle pad
• Weight Capacity: 4000 lbs.
• ANSI / ASME PALD 2009 Certified

Also included are the Schwaben Aluminum 3-Ton Jack Stands. These ultra-light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands show how much pride in workmanship goes into our stands. These stands feature all-aluminum construction with heavy-duty flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to ensure the pin stays in place.  

• Min. Height is 10.6".
• Max Height is 15.4".
• Large 7" diameter base.
• Outer support tube is 2-1/8" in diameter.

For replacement parts, please call us and ask for:

• ES#4430428 - Replacement Screw Set
• ES#4430429 - Replacement Front Wheel
• ES#4430430 - Replacement Caster Wheel

WARNING: This product contains chemicals known to the state of California to cause cancer, birth defects, and/or reproductive harm. See above warning label as well as http://www.p65warnings.ca.gov for further information on Proposition 65 warnings.

Upgrade Your N54 Shifting Performance with this Ultimate Short Shifter & Weighted Knob Kit! Take your 335i’s shifting experience to the next level with a perfectly paired set that delivers precision, speed, and a high-quality feel. This combo includes a fully adjustable short shifter kit and a Turner Motorsport weighted shift knob—everything you need to tighten up those shifts and make every gear change a joy.

E8X/E9X 335i/is N54 Short Shift Kit Engineered to perfection, this short shifter kit offers double adjustability so you can tailor both the height and throw to your exact preference. Unlike piecemeal upgrades, this comprehensive kit addresses every aspect of your shifting assembly, ensuring crisp shifts without any unwanted play. From a complete shift lever to upgraded bushings, this kit replaces all major components in one installation, giving you a fully refreshed shifting experience that works with any factory-style shift knob.

Key Benefits:

Fully Adjustable Short Throw: Fine-tune to your ideal throw length, from slightly shorter to ultra-short shifts. Enhanced Shift Feel: Faster, more precise shifts bring a new level of engagement to your drive. One-Step Installation: No need for extra parts or future troubleshooting—this kit has it all. Innovative Design & High-Quality Materials:

Precision-Crafted Lever Assembly: CNC-machined from durable chromoly steel and paired with a 304 stainless steel shifter ball. Corrosion-Resistant Components: 6061 anodized aluminum bearing cup and Nylatron bushings ensure longevity and smooth operation. Enhanced Stability: DSSR (Double Shear Selector Rod) minimizes deflection and provides a solid feel with every shift. Kit Contents:

Complete Shifter Arm Assembly (includes shifter lever, arm bushings, and bearing pins) Turner Poly Rear Shifter Arm Bushing Short Shift Lever Adapter E8X/E9X DSSR for consistent, precise shifts Installation Tips:

DSSR: Note the orientation of the factory selector rod before removal. To install, connect the two-piece DSSR to the transmission selector joint, aligning it in either 3rd or 5th gear position for ample workspace. Double Adjustable Shifter: Refer to the product page's installation tab for step-by-step guidance. Turner Weighted Shift Knob - 6 Speed Turner Motorsport’s weighted shift knob takes the standard BMW ZHP knob to new heights, combining a smooth, hefty feel with a refined design. Made from billet 6061-T6 aluminum and capped with a durable Delrin exterior, this 340g knob adds significant weight to each shift, reducing engagement time and smoothing out the overall feel. With precision CNC-machining, anodized finishes, and a clean OEM-style collar, this knob is as stylish as it is functional.

Premium Features:

Superior Build Quality: Solid billet aluminum core with a Delrin outer layer for maximum durability and comfort. Performance Weight: At 340g (nearly 180% heavier than stock), this weighted knob enhances shift engagement speed and smoothness. Anodized Finish with Turner Logo: Each knob is finished with a long-lasting Type II anodized coating and features an engraved Turner logo for a professional look. Together, the ECS Short Shift Kit and Turner Weighted Shift Knob make the ultimate upgrade, combining precision, durability, and a performance-focused design for your N54-powered 335i. Rediscover the joy of shifting and elevate every drive!