BMW Engine Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

ACL - Corporate Logo
T#:567606
Part#: 6B1584H-STD
In Stock
$ 193.99 USD
Free Shipping
$ 193.99 USD
Free Shipping

Introducing the BMW N52, N54, N55, and S55 Race Series High-Performance Con Rod Bearing Set by Automotive Components Limited. Elevate your BMW's performance with these precision-engineered con rod bearings, specifically designed for performance BMW engines.

Key Features:

Premium Quality: Crafted with the utmost precision and durability, this con rod bearing set ensures high performance and reliability for your BMW. Race Series Design: Engineered to meet the demands of race applications, these bearings are well-suited for high-performance driving scenarios. Enhanced Engine Protection: The bearings provide essential protection for your engine components, ensuring their longevity even under extreme conditions. Perfect Fit: Designed to seamlessly fit BMW N52, N54, N55, and S55 engines found in many newer BMWs, these bearings are a direct replacement for your stock components. Improved Performance: Experience enhanced engine performance and responsiveness, making it ideal for racing and high-performance driving. Upgrade your BMW with the Race Series High-Performance Con Rod Bearing Set from Automotive Components Limited. Enhance your vehicle's performance and enjoy peace of mind knowing your engine is protected by top-quality components.

Show More Show Less
VAC Motorsports - Corporate Logo
T#:29765724
Part#: VAC-11-CSG-N5X
Ships in 7 Business Days
$ 155.99

This product was last offered at the strikethrough price on
05-02-2026

$ 139.99 USD
Free Shipping on orders $49 and up
$ 139.99 USD
Free Shipping on orders $49 and up
The VAC Motorsports Crank Seal Guard, made of 6061 Billet Aluminum, prevents your serpentine belt from being pulled into your engine, a common problem amongst BMW N54, N55, and S55 Engines. Without a crank seal guard, the serpentine belt on N54, N55, and S55 engines is commonly sucked into the crank hub area past the crank seal, where it enters your engine and disrupts engine timing. When this occurs, the belt is shredded and clogs engine oil pickup, starving the engine and reducing oil pressure, causing catastrophic engine failure and thousands of dollars worth of damage. VAC Motorsports’ Crank Seal Guards are precision machined for perfect fitment and provide rigidity and maximum protection. We designed our guard with self-locating pilots to perfectly seal the crank hub bore and provide even, minimum clearance around the crank hub. Installation Hardware included. Made in the USA.
Show More Show Less

VAC Motorsports - Corporate Logo
T#:26038565
Part#: VAC-OPB-N55
In Stock
$ 199.99 USD
Free Shipping on orders $49 and up

Upgrade your BMW's oil system with the VAC Motorsports N55 Oil Pan Baffle, an essential component for track and street enthusiasts. Engineered to maintain oil surrounding the pick-up at all times, this baffle is crucial for preventing oil pressure loss during hard cornering and acceleration. Trusted by some of the fastest BMWs worldwide, this baffle ensures engine longevity and performance under extreme conditions. Don't risk catastrophic engine failure—equip your BMW with the VAC Motorsports N55 Oil Pan Baffle today.

Benefits:

  • Prevents significant loss of oil pressure
  • Vital for track and street use
  • Ensures engine longevity and performance
  • Trusted by high-performance BMWs worldwide
Show More Show Less

MANLEY - Corporate Logo
T#:46753538
Part#: 14078-6
In Stock at Vendor
3% off MSRP $ 923.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 895.99 USD
Free Shipping on orders $49 and up
3% off MSRP
$ 923.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 895.99 USD
Free Shipping on orders $49 and up
Don’t be fooled; not all H-Beams are created equal. Manley H-Beams are not only very “economically” priced, but they are finished to the same exacting tolerances and high quality standards as our Sportsmaster® and Pro Series rods. Final hone size, thread detail, bend, and twist - these are attributes we take very seriously. You will find the Manley H-Beam rods superior to others on the market.
Show More Show Less
MANLEY - Corporate Logo
T#:17073601
Part#: 646005C-6
In Stock at Vendor
8% off MSRP $ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up

MANLEY - Corporate Logo
T#:17073599
Part#: 646000C-6
In Stock at Vendor
8% off MSRP $ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up

Upgrade your BMW N54B30 engine with the N54B30 32cc Platinum Series Dish Piston Set, featuring high-strength 2618 material for enhanced performance.

  • Specifically designed for BMW N54B30 engines
  • Platinum Series for superior strength
  • Offset wrist pin for quiet start-ups
  • Premium Chrome Moly and 9310 alloy wall pins included
  • Pressure balance groove for optimal functionality
  • Accommodates +1mm valve sizes
  • Premium Steel top rings with Napier seconds
  • Round wire locks included for secure installation
  • Recommended piston clearance of .0035" for precision

Elevate your BMW N54B30 engine's performance with this Platinum Series Dish Piston Set, ensuring durability, quiet start-ups, and precision functionality.

Show More Show Less
MANLEY - Corporate Logo
T#:17073607
Part#: 647005C-6
In Stock
8% off MSRP $ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up

BMW N55 S55 37cc Platinum Series Dish Piston Set - 84.5mm Bore is designed for high-performance applications, providing exceptional strength and durability for BMW engines. Turner Motorsport offers this premium piston set to enhance engine reliability and efficiency.

  • High-Strength Material: Crafted from 2618 high-strength material for superior durability and performance.
  • Quiet Start-Ups: Offset wrist pin design minimizes noise during engine start-ups.
  • Premium Pins: Includes a .210” wall Premium Chrome Moly pin (Standard Series) or a .210” wall 9310 alloy pin (Extreme Duty Series) for added strength.
  • Pressure Balance Groove: Features a pressure balance groove to improve piston stability and efficiency.
  • Valve Accommodation: Designed to accommodate +1mm valve sizes for enhanced engine performance.
  • Top-Quality Rings: Comes with premium steel top rings, Napier seconds, and round wire locks for optimal sealing and reliability.
  • Recommended Clearance: Piston clearance of .0035” measured .850” from the bottom of the oil ring for precise fitment.
Show More Show Less

ACL - Corporate Logo
T#:10811990
Part#: ACL6B1584HX
In Stock
$ 258.99

This product was last offered at the strikethrough price on
05-30-2026

$ 209.99 USD
Free Shipping
$ 209.99 USD
Free Shipping
The ACL N54 Race Series High-Performance Rod Bearing Set is an elite enhancement tailored exclusively for BMW N54 engine models. Meticulously engineered for precision and durability, these rod bearings deliver heightened performance and reliability even under intense conditions. Crafted from premium materials and engineered to precise specifications, they ensure exceptional strength and longevity. This makes them the perfect selection for enthusiasts and professional racers striving to maximize the performance and endurance of their N54-powered vehicles.
Show More Show Less

VAC Motorsports - Corporate Logo
T#:1061441
Part#: ARP-HSK-N54
Ships in 2 Business Days
$ 554.99 USD
Free Shipping
$ 554.99 USD
Free Shipping
Despite the fact that BMW engineers some of the worlds most revered engines, during number crunching something always has to be a compromise. One item that is always found to be a weak point- the OEM hardware. It is definitely sub-par for real performance use under high stress such as modded engines and track use. We use these fasteners on all of VAC's in-house head builds. Whenever the head is coming off, your switching to forced induction, or if you are simply prepping to drive your car hard; we highly recommend switching to far superior race-grade hardware. These Head Stud Kits greatly improve reliability; helping to eliminate movement of the of the cylinder head and intern, gasket failure caused by inferior OEM head-bolt stretch. This is the #1 cause of premature head gasket failure, especially on boosted or high output engines. Though more expensive than OEM, converting to one of VAC's head studs kits will not only give added strength and reliability when its needed most, but provides the most accurate torque readings because studs don’t “twist” into the block; all clamping forces are on one axis, and there is less force exerted on the normally stressed threads of the block. This increases block and hardware life and typically makes the head easier to properly install to the block, a blessing if your head may have to be removed more than once. Especially in the time crunch of racing, when engines are dissembled frequently, studs make removing and installing the cylinder head on to the block a much easier task. By allowing the studs to act as a guide on to the head, your head slides on and off and also ensures proper alignment of the head and gasket for the same reason. It is similar to converting your wheel-bolts to wheel-studs.
Show More Show Less
VAC Motorsports - Corporate Logo
T#:17538610
Part#: ARP-HSK-N54-14
Ships in 2 Business Days
$ 599.99 USD
Free Shipping
$ 599.99 USD
Free Shipping
The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.
Show More Show Less
MANLEY - Corporate Logo
T#:17073609
Part#: 647000C-6
In Stock at Vendor
8% off MSRP $ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 1,208.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,111.99 USD
Free Shipping on orders $49 and up

Upgrade the performance of your BMW N55/S55 3.0L engine with the Turner Motorsport Manley 37cc Platinum Series Dish Piston Set. Crafted from high-strength 2618 material, these pistons offer exceptional durability and reliability. The offset wrist pin design ensures quiet start-ups, while the inclusion of both Premium Chrome Moly and 9310 alloy .210” wall pins caters to varying needs. The pressure balance groove, compatibility with +1mm valve sizes, and premium steel top rings with Napier seconds and round wire locks make these pistons a top-notch choice. With a recommended piston clearance of .0035”, measured .850” from the bottom of the oil ring, these pistons guarantee optimal performance for your BMW engine.

  • Manley 37cc Platinum Series Dish Piston Set for BMW N55/S55 3.0L engine.
  • High-strength 2618 material for exceptional durability.
  • Offset wrist pin for quiet start-ups.
  • Includes both Premium Chrome Moly and 9310 alloy .210” wall pins.
  • Pressure balance groove for enhanced performance.
  • Accommodates +1mm valve sizes for customization.
  • Premium steel top rings with Napier seconds and round wire locks included.
  • Recommended piston clearance of .0035” ensures optimal engine function.

Enhance your BMW's engine with the Turner Motorsport Manley 37cc Platinum Series Dish Piston Set, delivering reliability and performance.

Show More Show Less


MANLEY - Corporate Logo
T#:26271778
Part#: 14448-6
In Stock at Vendor
$ 1,641.99 USD
Free Shipping on orders $49 and up
Unlock the full potential of your BMW N54 engine with the Forged TurboTuff Connecting Rod Set from Manley Performance. Crafted with precision and expertise, these connecting rods are designed to deliver unparalleled performance and durability. Renowned for their lightweight yet robust construction, they undergo rigorous manufacturing processes to ensure exceptional quality. Each set is meticulously weight-matched for optimal balance, providing enhanced engine efficiency and reliability. Elevate your BMW N54 engine to new heights with the Manley Performance TurboTuff Connecting Rod Set.
Show More Show Less
OMP - Corporate Logo
T#:1614
Part#: EA-462
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less
MANLEY - Corporate Logo
T#:17073606
Part#: 647005CE-6
In Stock
Sale - Save 25% $ 1,309.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 982.14 USD
Sale - Save 25%
$ 1,309.99

This product was last offered at the strikethrough price on
06-26-2026

$ 982.14 USD

Vaico - Corporate Logo
T#:34114245
Part#: V20-3674
In Stock
$ 827.99

This product was last offered at the strikethrough price on
05-07-2026

$ 499.99 USD
Free Shipping on orders $49 and up
$ 499.99 USD
Free Shipping on orders $49 and up

If your N52 engine is running rough, is low on power, or you are getting check engine lights for timing related issues, there is a good chance that you have a faulty VANOS component. The two most common parts to fail are the Camshaft Adjusters and VANOS Solenoids.

This repair kit from Vaico includes all of the basic parts necessary to service the VANOS system and restore smooth engine operation.

Included:

Intake Camshaft Adjuster w/ Impulse Wheel

Exhaust Camshaft Adjuster w/ Impulse Wheel

Camshaft Adjuster Bolts

VANOS Solenoid Valves

Valve Cover Gasket Set

Show More Show Less

MANLEY - Corporate Logo
T#:17073600
Part#: 646000CE-6
Back Ordered
8% off MSRP $ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD
8% off MSRP
$ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD
Autel - Corporate Logo
T#:2914116
Part#: AL329
Ships in 1 Business Day
$ 49.99 USD
Free Shipping on orders $49 and up
OBDII Code Reader

Valeo New Starter Motor - E70, E71, E82, E84, E88, E92, E93, F10, F30...
For vehicles with production date from 03/2011
We Price Match - Give Us A Call or Chat!
Valeo - Corporate Logo
T#:594588
Part#: 12417616502
In Stock
$ 265.76 USD
Free Shipping
$ 265.76 USD
Free Shipping
Brand new unit - no core charge! Avoid messing with a core return entirely!
ACL - Corporate Logo
T#:637190
Part#: 6B1584H-.025
Special Order: No Guaranteed ETA
$ 261.99 USD
Free Shipping
$ 261.99 USD
Free Shipping
Upgraded Bearing Shells for you N55/N54/S55B30!

Vaico - Corporate Logo
T#:57231520
Part#: 07119901299
Ships in 1 Business Day
New Item
$ 2.49 USD
Free Shipping on orders $49 and up
M8x16

Active Autowerke - Corporate Logo
T#:57616348
Part#: RTF-1L
Ships in 3 Business Days
New Item
$ 240.00 USD
Free Shipping
$ 240.00 USD
Free Shipping
Rotrex superchargers utilize a unique traction drive system that sets it apart from other centrifugal-style superchargers. For best performance, Rotrex recommends replacing this fluid every 50,000 miles. This bottle of traction fluid is plenty enough for one supercharger service (typically 750ml).
Show More Show Less
Autel - Corporate Logo
T#:2914136
Part#: MSULTRA
Ships in 6 Business Days
$ 12,306.99 USD
Free Shipping on orders $49 and up
The MaxiSys Ultra is Autel’s most ambitious diagnostics tablet designed to maximize technician intelligence.
MANLEY - Corporate Logo
T#:17073608
Part#: 647000CE-6
Back Ordered
8% off MSRP $ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD
Free Shipping on orders $49 and up


VAC Motorsports - Corporate Logo
T#:28736798
Part#: CPFPS-N54-84-9.2
Ships on Sep 22, 2026
$ 2,077.99 USD
Free Shipping on orders $49 and up
MANLEY - Corporate Logo
T#:17073602
Part#: 646005CE-6
Back Ordered
8% off MSRP $ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD
Free Shipping on orders $49 and up
8% off MSRP
$ 1,423.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 1,309.99 USD
Free Shipping on orders $49 and up