BMW Engine Parts for BMW 1 Series E82 (2008-2013)

Race Series High Performance Connecting Rod Bearing Set - BMW N52/N54...

T#:567606

Part#: 6B1584H-STD

In Stock

$ 193.99 USD

Add to Wish List

Qty

$ 193.99 USD

Add to Wish List

Introducing the BMW N52, N54, N55, and S55 Race Series High-Performance Con Rod Bearing Set by Automotive Components Limited. Elevate your BMW's performance with these precision-engineered con rod bearings, specifically designed for performance BMW engines.

Key Features:

Premium Quality: Crafted with the utmost precision and durability, this con rod bearing set ensures high performance and reliability for your BMW. Race Series Design: Engineered to meet the demands of race applications, these bearings are well-suited for high-performance driving scenarios. Enhanced Engine Protection: The bearings provide essential protection for your engine components, ensuring their longevity even under extreme conditions. Perfect Fit: Designed to seamlessly fit BMW N52, N54, N55, and S55 engines found in many newer BMWs, these bearings are a direct replacement for your stock components. Improved Performance: Experience enhanced engine performance and responsiveness, making it ideal for racing and high-performance driving. Upgrade your BMW with the Race Series High-Performance Con Rod Bearing Set from Automotive Components Limited. Enhance your vehicle's performance and enjoy peace of mind knowing your engine is protected by top-quality components.

Show More Show Less

ACL 3.0L Standard Size Main Bearing Set BMW N52/N54/N55/S55B30 ...

T#:25706124

Part#: ACL7M1397H-STD

In Stock

$ 256.99 USD

Add to Wish List

Qty

$ 256.99 USD

Add to Wish List

VAC Motorsports Crank Seal Guard - N54 N55 S55

T#:29765724

Part#: VAC-11-CSG-N5X

Ships in 9 Business Days

$ 155.99

This product was last offered at the strikethrough price on
05-02-2026

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

The VAC Motorsports Crank Seal Guard, made of 6061 Billet Aluminum, prevents your serpentine belt from being pulled into your engine, a common problem amongst BMW N54, N55, and S55 Engines. Without a crank seal guard, the serpentine belt on N54, N55, and S55 engines is commonly sucked into the crank hub area past the crank seal, where it enters your engine and disrupts engine timing. When this occurs, the belt is shredded and clogs engine oil pickup, starving the engine and reducing oil pressure, causing catastrophic engine failure and thousands of dollars worth of damage. VAC Motorsports’ Crank Seal Guards are precision machined for perfect fitment and provide rigidity and maximum protection. We designed our guard with self-locating pilots to perfectly seal the crank hub bore and provide even, minimum clearance around the crank hub. Installation Hardware included. Made in the USA.

Show More Show Less

VAC Motorsports Oil Pan Baffle N55 3.0L Engine

T#:26038565

Part#: VAC-OPB-N55

In Stock

$ 199.99 USD

Add to Wish List

Qty

$ 199.99 USD

Add to Wish List

Upgrade your BMW's oil system with the VAC Motorsports N55 Oil Pan Baffle, an essential component for track and street enthusiasts. Engineered to maintain oil surrounding the pick-up at all times, this baffle is crucial for preventing oil pressure loss during hard cornering and acceleration. Trusted by some of the fastest BMWs worldwide, this baffle ensures engine longevity and performance under extreme conditions. Don't risk catastrophic engine failure—equip your BMW with the VAC Motorsports N55 Oil Pan Baffle today.

Benefits:

Prevents significant loss of oil pressure
Vital for track and street use
Ensures engine longevity and performance
Trusted by high-performance BMWs worldwide

Show More Show Less

ACL BMW N54B30/N55B30 3.0L Race Series Standard Size Conrod Rod Beari...

T#:10811990

Part#: ACL6B1584HX

In Stock

$ 258.99

This product was last offered at the strikethrough price on
05-30-2026

$ 209.99 USD

Add to Wish List

Qty

$ 209.99 USD

Add to Wish List

The ACL N54 Race Series High-Performance Rod Bearing Set is an elite enhancement tailored exclusively for BMW N54 engine models. Meticulously engineered for precision and durability, these rod bearings deliver heightened performance and reliability even under intense conditions. Crafted from premium materials and engineered to precise specifications, they ensure exceptional strength and longevity. This makes them the perfect selection for enthusiasts and professional racers striving to maximize the performance and endurance of their N54-powered vehicles.

Show More Show Less

BMW N54 ARP Head Stud Kit

T#:17538610

Part#: ARP-HSK-N54-14

Ships in 3 Business Days

$ 599.99 USD

Add to Wish List

Qty

$ 599.99 USD

Add to Wish List

The VAC Motorsports ARP Head Stud Kit was put together by VAC and ARP’s finest engineers. This is a completely custom kit designed specifically for the almighty N54. *High Boost (25+ psi application) option features: (14) 11mm ARP Head Studs (14) ARP Washers for 11mm Studs (14) ARP Nuts for 11mm Studs Install Tips: MUST drill and tap the (4) 9mm holes in the engine block to make them 11mm holes. This way all the engine block holes are 11mm, and fit ALL (14) 11mm Studs. Torque Specs: All studs torque down through 3-equal steps to 95 ft lbs ***This is NOT the Chrysler and Volvo stud kits! VAC Motorsports and ARP engineers designed and assembled this kit with high grade material, specifically so standard street-use or high-boost N54 owners have a PROPER kit that does not fail over time, such as the retro-fit Chrysler and Volvo head stud kits. ARP is the world leader in fastener technology. Makers of the finest fasteners in the market, especially for BMW engines, ARP is the brand you can count on when you want the highest reliability possible. If you are looking for high performance from your BMW engine, then ARP Head Stud Kits are a must. All kits come complete with hardened parallel-ground washers and aerospace-quality nuts.

Show More Show Less

ARP Performance Head Stud Kit - N54

T#:1061441

Part#: ARP-HSK-N54

Ships in 2 Business Days

$ 554.99 USD

Add to Wish List

Qty

$ 554.99 USD

Add to Wish List

Despite the fact that BMW engineers some of the worlds most revered engines, during number crunching something always has to be a compromise. One item that is always found to be a weak point- the OEM hardware. It is definitely sub-par for real performance use under high stress such as modded engines and track use. We use these fasteners on all of VAC's in-house head builds. Whenever the head is coming off, your switching to forced induction, or if you are simply prepping to drive your car hard; we highly recommend switching to far superior race-grade hardware. These Head Stud Kits greatly improve reliability; helping to eliminate movement of the of the cylinder head and intern, gasket failure caused by inferior OEM head-bolt stretch. This is the #1 cause of premature head gasket failure, especially on boosted or high output engines. Though more expensive than OEM, converting to one of VAC's head studs kits will not only give added strength and reliability when its needed most, but provides the most accurate torque readings because studs don’t “twist” into the block; all clamping forces are on one axis, and there is less force exerted on the normally stressed threads of the block. This increases block and hardware life and typically makes the head easier to properly install to the block, a blessing if your head may have to be removed more than once. Especially in the time crunch of racing, when engines are dissembled frequently, studs make removing and installing the cylinder head on to the block a much easier task. By allowing the studs to act as a guide on to the head, your head slides on and off and also ensures proper alignment of the head and gasket for the same reason. It is similar to converting your wheel-bolts to wheel-studs.

Show More Show Less

Accusump Marine 2 Qt Kit

T#:8246787

Part#: 24-126

Ships on Sep 24, 2026

17% off MSRP $ 1,006.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 839.00 USD

Add to Wish List

Qty

17% off MSRP

$ 1,006.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 839.00 USD

Add to Wish List

TiAL Sport Q 50mm Blow Off Valve - Black

Requires Welding for Listed Vehicle Fitments

T#:2135101

Part#: Q.11BK

In Stock

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

The first revision of TiAL's original blow-off valve, the Q Series flows 60% more than its predecessor and bolts to any standard TiAL flange without welding. An aluminum weld base mounting flange cut for 2-1/2'' pipe and aluminum V-band mounting clamp with stainless steel hardware create a durable corrosion-free appearance. A banjo-type aluminum air fitting and bolt with oversized 10mm hose barb allow quick actuator response.

Show More Show Less

Schrick - N52 Performance Camshaft Set - 238/272

T#:26904914

Part#: SCH-N52-238/272

Special Order: No Guaranteed ETA

$ 1,749.99 USD

Add to Wish List

Qty

$ 1,749.99 USD

Add to Wish List

Inline 6 RACE Series Bearing Shells - Set

T#:637190

Part#: 6B1584H-.025

Special Order: No Guaranteed ETA

$ 261.99 USD

Add to Wish List

Qty

$ 261.99 USD

Add to Wish List

Upgraded Bearing Shells for you N55/N54/S55B30!

CP-Carrillo Forged Piston Set - N54

T#:28736798

Part#: CPFPS-N54-84-9.2

Ships on Sep 22, 2026

$ 2,077.99 USD

Add to Wish List

Qty

$ 2,077.99 USD

Add to Wish List

24-270X Accusump Pro Electric Valve Kit

T#:590562

Part#: 24-270X

Ships on Sep 24, 2026

17% off MSRP $ 297.60

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.00 USD

Add to Wish List

Qty

17% off MSRP

$ 297.60

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 248.00 USD

Add to Wish List

N54 Schrick Camshaft Set 268/265

T#:25739348

Part#: N54CAMSKT

Ships on Dec 22, 2026

$ 3,415.99 USD

Add to Wish List

Qty

$ 3,415.99 USD

Add to Wish List

Take your N54-powered BMW to the next level with this upgraded camshaft kit from Schrick Cams! Increasing the air allowed in and out of the motor by increasing both lift and duration over stock is one of the most effective ways to add power to your car next to adding more boost. We recommend finding a competent tuner to get the most out of your individual setup. Duration Duration Intake: 268 Duration Intake @ 1mm: 219 Duration Exhaust: 264 Duration Exhaust @ 1mm: 214 Intake Peak Timing: 125,6 Exhaust Peak Timing: -128 Lift Cam Lobe Lift Intake: 7,2 Cam Lobe Lift Exhaust: 6,54 Valve Lift Without Valve Clearance Intake: 12 Valve Lift Without Valve Clearance Exhaust: 11 Valve Clearance Intake: hydr. Valve Clearance Exhaust:

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW 1 Series E82 (2008-2013)

Sub-Categories

Race Series High Performance Connecting Rod Bearing Set - BMW N52/N54...

ACL 3.0L Standard Size Main Bearing Set BMW N52/N54/N55/S55B30 ...

VAC Motorsports Crank Seal Guard - N54 N55 S55

VAC Motorsports Oil Pan Baffle N55 3.0L Engine

Benefits:

ACL BMW N54B30/N55B30 3.0L Race Series Standard Size Conrod Rod Beari...

BMW N54 ARP Head Stud Kit

ARP Performance Head Stud Kit - N54

Accusump Marine 2 Qt Kit

TiAL Sport Q 50mm Blow Off Valve - Black

Schrick - N52 Performance Camshaft Set - 238/272

Inline 6 RACE Series Bearing Shells - Set

CP-Carrillo Forged Piston Set - N54

24-270X Accusump Pro Electric Valve Kit

N54 Schrick Camshaft Set 268/265

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results