Turbos for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

If more boost and reliability are your goals choose from one of our BMW turbo upgrades. Our turbo upgrades range from stock turbos rebuilt with stronger internals to all-new, ground-up turbo upgrades. BMW turbos such as the N54 are capable of really impressive power numbers on stock engine internals but the factory turbos lack the precise tolerances and reliability that an upgraded unit will deliver. In other words, the stock turbos can only do so much and if big power (>400whp) is your goal a turbo upgrade must be in your plans. Our partners are leading experts in turbo technology and upgrades. Each Stage has been professionally developed and tested. Additional upgrades and tuning may be, or is, required. Contact us for more details on tuning options.

Sub-Categories

Sort By:

MAC Single Turbo Boost Solenoid - N54 N55

T#:587715

Part#: MACSTS

In Stock

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!

Pure Turbo Heavy Duty N55 Pneumatic Wastegate Actuator - BMW N55 3.0L...

T#:17771605

Part#: HDN55WG

In Stock

$ 160.99 USD

Add to Wish List

Qty

$ 160.99 USD

Add to Wish List

The early N55 turbocharger is notorious for pneumatic wastegate actuator failure, a common issue that triggers frustrating boost errors and persistent check engine lights. Because BMW does not provide this specific component as a standalone replacement, owners are often left with few official repair options. Pure Turbos solves this problem with an upgraded actuator engineered to fix the inherent weaknesses of the original equipment while simultaneously boosting the efficiency of the entire turbocharging system. One of the primary benefits of this enhanced actuator is its ability to deliver approximately 2 psi of additional boost compared to the factory unit while maintaining the same Wastegate Duty Cycle. By optimizing how exhaust gases are managed and bypassed, this component allows the engine to generate more power without requiring more effort from the electronics. This increased pressure translates directly into sharper throttle response and a noticeable jump in horsepower, making it an essential upgrade for drivers who want to restore their vehicle's reliability while enjoying a more aggressive and responsive driving experience.

Show More Show Less

Pure Turbos N55 PURE500 Turbo Upgrade - BMW N55 3.0L w/ PWG

PWG models only

T#:13957903

Part#: N55PURE500PWG

In Stock

$ 1,136.99

This product was last offered at the strikethrough price on
07-07-2026

$ 1,095.00 USD

Add to Wish List

Qty

$ 1,095.00 USD

Add to Wish List

These PURE500 turbos from Pure Turbos are sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance, there is no better stage 1 turbo option for your N55!

Show More Show Less

URO Vacuum Canister - BMW N54 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:39768337

Part#: 11652247620

In Stock

$ 33.99 USD

Add to Wish List

Qty

$ 33.99 USD

Add to Wish List

Used in the turbo system to help hold vacuum.

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

For use with converted single turbo N54 engines

T#:23880741

Part#: N54STCCPBO

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.

Show More Show Less

Pure Turbos N55 PURE600 Turbo Upgrade - BMW N55 3.0L w/ PWG

T#:38385325

Part#: BMW-N55-PURE-600

Ships in 4 Business Days

$ 2,589.00 USD

Add to Wish List

Qty

$ 2,589.00 USD

Add to Wish List

Upgrade your N55's turbocharger to Pure Turbo's PURE600 upgrade to make increased power without sacrificing drivability or reliability.

Turbocharger Boost Solenoid Valve

2X Entries Into Our F80 M3 Sweepstakes

T#:31622556

Part#: 11747626350

In Stock

$ 80.99 USD

Add to Wish List

Qty

$ 80.99 USD

Add to Wish List

Pure Turbos N55 Stage 2 Turbo Upgrade - BMW N55 3.0L w/ PWG

For vehicles with pneumatic waste gate (PWG)

T#:578272

Part#: PURE-N55-0001KT

Ships in 4 Business Days

$ 2,906.99

This product was last offered at the strikethrough price on
07-14-2026

$ 2,800.00 USD

Add to Wish List

Qty

$ 2,800.00 USD

Add to Wish List

As BMW enthusiasts, we admittedly did not know how to feel when BMW moved to forced induction. We loved the naturally aspirated power that the NA straight six produced, but Pure Turbos has been able to prove time and time again what a forced induction BMW powerplant is capable of putting down. Here at Turner Motorsport, we trust Pure Turbos to meet all of your power desires - after all, there's a reason the majority of the fastest forced induction BMWs on the road are running Pure Turbos. Looking for massive gains out of your N55 powered BMW? This Stage 2 turbo upgrade kit from Pure Turbos can allow you to achieve over 500whp reliably with supporting modifications! This price includes a $300 core charge that is refunded once we receive your rebuildable core. This upgrade kit features: Upgraded high flow turbine wheel Upgraded point-milled billet compressor wheel Dual oil seals on both compressor and turbine Large diameter 360 thrust upgrade Extensive turbofold modifications and machining Direct fit, as OEM, as these utilize OEM housings Featuring a limited 1 year warranty. For vehicles with pneumatic waste gate (PWG)

Show More Show Less

Pure Turbos N55 PURE750 Turbo Upgrade - BMW N55 3.0L w/ PWG

PWG models only

T#:13957911

Part#: N55PURE750PWG

Ships in 4 Business Days

$ 3,107.99

This product was last offered at the strikethrough price on
07-13-2026

$ 3,107.00 USD

Add to Wish List

Qty

$ 3,107.00 USD

Add to Wish List

These PURE750 turbos from Pure Turbos are sure to give your car the extra oomph you're looking for! With easy installation and a stealth stock appearance! The craziness pursues with the possibility of 608whp with E30 and meth running 25psi but those numbers could reach upwards of 650+ with other upgrades! crazy. we know, which leaves this as one of the best stage 2 options for your N55!

Show More Show Less

N54 Single Turbo Conversion Oil Fitting

For use with converted single turbo N54 engines

T#:23880740

Part#: N54STCOCF

Back Ordered

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.

Show More Show Less

Pneumatic Boost Solenoid - N20 N55 N63 S63 Engines

2X Entries Into Our F80 M3 Sweepstakes

T#:6166479

Part#: 11747626351

Ships in 1 Business Day

$ 99.99

This product was last offered at the strikethrough price on
06-30-2026

$ 89.99 USD

Add to Wish List

Qty

$ 89.99 USD

Add to Wish List

Optimize the performance of your BMW's N20, N55, N63, or S63 engine with the Pneumatic Boost Solenoid. This essential actuator plays a crucial role in regulating vacuum, influencing the overall performance of your vehicle. Ensure your BMW operates at its best by addressing faulty boost solenoids promptly.

Engine Performance Optimization: The boost solenoid enhances the overall performance of N20, N55, N63, and S63 engines.
Vacuum Regulation: Precisely regulates vacuum levels, contributing to efficient engine operation.
Compatibility: Designed for BMW vehicles with N20, N55, N63, and S63 engines for a perfect fit.
Fault Resolution: Promptly addressing faulty boost solenoids ensures consistent and reliable vehicle performance.

Upgrade your BMW's engine performance with the Pneumatic Boost Solenoid, designed to deliver optimal functionality for N20, N55, N63, and S63 engines.

Show More Show Less

Turbocharger Stud - 11658634236 - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:24145941

Part#: 11658634236

Ships in 1 Business Day

$ 13.99

This product was last offered at the strikethrough price on
08-31-2026

$ 11.99 USD

Add to Wish List

Qty

$ 11.99 USD

Add to Wish List

OE replacement for the threaded bolt/stud found on the N54 front turbocharger assembly.

URO Turbo Coolant Line - BMW N54 3.0L

2X Entries Into Our F80 M3 Sweepstakes

T#:37925872

Part#: 11537558901

In Stock

$ 48.54 USD

Add to Wish List

Qty

$ 48.54 USD

Add to Wish List

URO Turbo Coolant Line - BMW N54 3.0L

The URO Turbo Coolant Line - BMW N54 3.0L is a premium replacement designed to restore proper coolant circulation and maintain optimal turbocharger performance. Precision-formed to match the exact OE length and shape, this coolant line ensures seamless integration and factory-correct appearance. Constructed with high-quality materials, it resists exposure to coolant and extreme turbocharger heat, preventing premature wear and failure. Equipped with the correct end fittings, it provides a hassle-free installation and a secure, leak-free connection. Ideal for BMW N54 3.0L engines, this coolant line helps prevent overheating and extends the life of your turbocharger system.

Key Benefits:

Direct OE replacement for a precise fit and factory-like appearance
High-quality construction resists coolant exposure and extreme turbo heat
Pre-formed design ensures proper routing and optimal coolant flow
Leak-free performance with correctly fitted end connections
Enhances turbo longevity by maintaining proper cooling efficiency

Ensure your BMW N54 3.0L turbo system operates at peak efficiency with the URO Turbo Coolant Line, engineered for durability and reliable performance.

Show More Show Less

Turbocharger Cut-Off Valve

2X Entries Into Our F80 M3 Sweepstakes

T#:25109077

Part#: 11657601058

Ships on Sep 29, 2026

$ 96.99 USD

Add to Wish List

Qty

$ 96.99 USD

Add to Wish List

If your vehicle is producing boost-related engine fault codes, it may be time to replace your diverter valve. This valve, found on the compressor housing, is designed to vent pressurized air when the throttle plate is closed, preventing compressor surge in the process.

This factory replacement unit is a "plumb-back" style, meaning the pressurized air is recirculated into the inlet for silent operation.

Compressor surge and boost-related fault codes can hurt your vehicle's powertrain. Thankfully, URO Parts offers this replacement unit designed to fix these issues.

Show More Show Less

Select Vehicle

Purpose

Category

Turbos

Brand

View All Brands

Price

Shipping