Turbos for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

If more boost and reliability are your goals choose from one of our BMW turbo upgrades. Our turbo upgrades range from stock turbos rebuilt with stronger internals to all-new, ground-up turbo upgrades. BMW turbos such as the N54 are capable of really impressive power numbers on stock engine internals but the factory turbos lack the precise tolerances and reliability that an upgraded unit will deliver. In other words, the stock turbos can only do so much and if big power (>400whp) is your goal a turbo upgrade must be in your plans. Our partners are leading experts in turbo technology and upgrades. Each Stage has been professionally developed and tested. Additional upgrades and tuning may be, or is, required. Contact us for more details on tuning options.

Sub-Categories

Sort By:

MAC Single Turbo Boost Solenoid - N54 N55

T#:587715

Part#: MACSTS

In Stock

$ 51.99 USD

Add to Wish List

Qty

$ 51.99 USD

Add to Wish List

Use this plug and play low frequency MAC solenoid if retrofitting a single turbo kit to your N54 or N55. Includes plug and play harness connector for no splicing!

VTT N54 Billet Vacuum (Boost Control) Tank Kit - Anodized Blue - BMW ...

2X Entries Into Our F80 M3 Sweepstakes

T#:7530040

Part#: VACUUMCANBLUE

Ships in 1 Business Day

Sale - Save 15% $ 199.99

This product was last offered at the strikethrough price on
09-03-2026

$ 169.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 199.99

This product was last offered at the strikethrough price on
09-03-2026

$ 169.99 USD

Add to Wish List

VTT is proud to offer their billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines VTT's cans are made of 6061-T6 aluminum, and anodized in 4 colors for beauty, and long life. They also knurl the cans for a very distinct look in the engine bay! VTT also designed these cans to complement their N54 Billet lineup – N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap, and so on. All will have matching color These cans are offered in 4 colors – Red, Black, Blue, and Clear anodize The kit will include: 2 – Vacuum canisters (color of choice) 4 – billet 90-degree barbed fittings Requires the additional use of aftermarket vacuum line - Vacuum line not included. Replaces Genuine BMW Vacuum Canisters # 11652247620

Show More Show Less

Coolant Port Block Off Plugs for N54 Single Turbo Conversion ...

For use with converted single turbo N54 engines

T#:23880741

Part#: N54STCCPBO

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

If you're installing a single turbo kit on your N54-powered BMW, you'll need to block off the two coolant ports on the exhaust side of the engine block. This kit contains high-quality billet aluminum plugs for both the front and rear location factory coolant feed locations.

Show More Show Less

FTP Motorsport Boost Fitting - N20/N55

T#:582217

Part#: SG80036

Special Order: No Guaranteed ETA

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

If you are planning on running additional boost, keeping tabs on the level is going to be an important factor. For doing this you have many options...Apps, scanners, coding. But what about a good old mechanical gauge? Now you can add one the easy way with this sandwich plate adapter from FTP. Simply remove the factory boost sensor install the plate, re-bolt the boost sensor and you're done.

Show More Show Less

N54 Single Turbo Conversion Oil Fitting

For use with converted single turbo N54 engines

T#:23880740

Part#: N54STCOCF

Back Ordered

$ 25.00 USD

Add to Wish List

Qty

$ 25.00 USD

Add to Wish List

Planning a single turbo swap on your N54? To utilize a single turbo oil feed hose, you'll need an adapter that has threads. Fortunately, Burger Motorsports produces this high-quality CNC billet aluminum piece to provide seamless integration with the factory feed location.

Show More Show Less

Mosselman BMW N55 PWG Upgrade Turbocharger, MSL48-60

For vehicles with Pneumatic Wastegate

T#:12872411

Part#: 10201016

Ships in 6 Business Days

$ 3,239.00 USD

Add to Wish List

Qty

$ 3,239.00 USD

Add to Wish List

This Mossleman upgraded turbocharger will bring reliable high performance to your N55 PWG engine! Depending on modifications done to the vehicle, this turbo can deliver up to 600hp!

Mosselman BMW N54 Upgrade Turbocharger Set, MSL50-65, 1 SERIES/RHD ...

For RHD vehicles

T#:12872408

Part#: 10210018

Ships in 6 Business Days

$ 3,719.00 USD

Add to Wish List

Qty

$ 3,719.00 USD

Add to Wish List

This plug and play turbocharger set from Mosselman is precision made to boost your power reliably for your N54 engine. Depending on the modifications done to the car, you could see up to 650hp!

Mosselman BMW N54 Upgrade Turbocharger Set, MSL50-65

T#:12872407

Part#: 10210017

Ships in 6 Business Days

$ 3,719.00 USD

Add to Wish List

Qty

$ 3,719.00 USD

Add to Wish List

This plug and play turbocharger set from Mosselman is precision made to boost your power reliably for your N54 engine. Depending on the modifications done to the car, you could see up to 650hp!

Select Vehicle

Category

Turbos

Brand

View All Brands

Price

Special Offers

On Sale (1)

Shipping