Drivetrain Mounts and Upgrades for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

From the factory, engine and transmission mounts are rubber and thus a wear component. Worn out engine or transmission mounts create sloppiness and a disconnect between the driver and your BMW's powerplant. If your vehicle is purpose built for the track, we recommend solid engine and transmission mounts. These have zero deflection, but come at the expense of added NVH (noise, vibration, and harshness). Poly engine and transmission mounts offer a good balance between OEM rubber and solid mounts for those with mixed purpose vehicles, offering great performance and connection with little sacrifice in terms of NVH.

Sub-Categories

Sort By:

ECS - Corporate Logo
T#:381356
Part#: 002705ECS02A
In Stock
Sale - Save 10% $ 117.99

This product was last offered at the strikethrough price on
06-13-2026

$ 106.19 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 117.99

This product was last offered at the strikethrough price on
06-13-2026

$ 106.19 USD
Free Shipping on orders $49 and up

ECS Tuning's Polyurethane Transmission Mounts are designed to address the vital role of transmission mounts in your vehicle's suspension. The factory mounts are notorious for failures that can result in over-revving, mis-shifts, and in extreme cases, potential chassis damage. Our polyurethane mounts provide a robust solution, engineered for both street and track applications, guaranteeing enhanced performance while eliminating concerns about torn mounts.

Polyurethane stands out with its exceptional toughness, durability, and impressive wear resistance compared to rubber. It also exhibits resistance to water, oil, and grease while retaining its original shape even when subjected to significant compression. By reducing deflection, polyurethane facilitates effective power transfer. While there may be a slight increase in NVH (Noise, Vibration, Harshness), the benefits far outweigh this minor compromise in ride comfort. With a polyurethane durometer of 70A, our street mounts are versatile, offering both daily driving comfort and track durability. For more track-oriented enthusiasts, we provide stiffer mounts with an 80A durometer rating.

For a hassle-free installation, we supply a comprehensive DIY guide. ECS Tuning ensures that you are fully supported from start to finish.

Show More Show Less
Powerflex Black Series - Corporate Logo
T#:6924324
Part#: PFF5-4020BLK
In Stock
$ 62.99 USD
Free Shipping on orders $49 and up
Powerflex is the number one selling suspension bushing manufacturer in Europe. Their experience with polyurethane bushing material and state-of-the art manufacturing techniques allows them to produce premium performance bushings, made to exact-fit standards. Powerflex performance polyurethane bushings are built to last longer than OEM rubber bushings, while improving performance and allowing for a more engaging driving experience. Powerflex is pleased to introduce their new N54, N55, and B58 Engine Mount Inserts, intermediate alternatives to the BMW aluminum inserts and much stiffer full replacement engine mounts available on the aftermarket. Made in Black 70A durometer material, they are designed to fit the OE mounts snuggly to restrict engine movement with a minimal increase in NVH, perfect for those with tuned road cars. Their design and flexibility also mean they can be fitted to the vehicle without removing the engine mounts themselves. Reducing engine/transmission movement by way of upgraded inserts has the following benefits: Sharper throttle response Improved gear shifting More direct power transfer More balanced on/off throttle handling Prolonged life of the OE mounts *Yellow version pictured for installation reference A small increase in NVH, usually at idle, should be expected when stiffening the connecting mount between the engine and chassis. The harder the material used, the greater the NVH transmitted.
Show More Show Less
Packaged by Turner - Corporate Logo
T#:42099844
Part#: 22116793240TKT
Ships in 3 Business Days
$ 387.99

This product was last offered at the strikethrough price on
05-06-2026

$ 380.99 USD
Free Shipping on orders $49 and up
$ 380.99 USD
Free Shipping on orders $49 and up
Whether you're building a dedicated track car or upgrading your street BMW, the N54T/"is" Engine & Transmission Mount Kit is an essential component for maximizing drivetrain performance and reliability.
Show More Show Less

Powerflex Black Series - Corporate Logo
T#:376534
Part#: PFR5-1226B
Ships in 1 Business Day
$ 52.99 USD
Free Shipping on orders $49 and up

Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

This part fits the following BMWs:
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
2006 - 2009 E91 325xi 328i 328xi
2009 - 2011 E91 328i 328xi 
2007 - 2013 E92 328i 328xi 335i 335xi
2007 - 2013 E93 328i 335i

Show More Show Less

Packaged by Turner - Corporate Logo
T#:24344778
Part#: ECSTMSPDBKT
In Stock
Sale - Save 8% $ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD
Free Shipping on orders $49 and up
Sale - Save 8%
$ 1,190.99

This product was last offered at the strikethrough price on
05-03-2026

$ 1,096.14 USD
Free Shipping on orders $49 and up
Turner recommends running drivetrain mounts of all the same variety - if you are using poly engine mounts, you should also use poly transmission mounts. This kit is your solution to make sure all components of your vehicle are working with each other to achieve the performance you're looking for. Polyurethane material is more resistant to water, ozone, and chemicals, maintaining its resiliency and elasticity longer than conventional rubber. Keep your vehicle planted for spirited driving while having crisper throttle response and reduce drivetrain movement along with wheel hop. Kit includes: Turner Engine Mount Set - 60A Polyurethane ECS Transmission Mount Set - Street 70A Polyurethane ECS Differential Bushing Set - 95A Polyurethane ECS Subframe Mount Set - 95A - Polyurethane
Show More Show Less
Meyle Transmission Mount
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:579237
Part#: 3002371101
In Stock
$ 12.99 USD
Free Shipping on orders $49 and up
Mounted at the rear of transmission on crossmember

Packaged by Turner - Corporate Logo
T#:56038061
Part#: E9XSBFRDFFBKT2
In Stock
New Item
$ 491.99 USD
Free Shipping on orders $49 and up
This complete upgrade package is designed to put an end to steering slop. Utilizing a high performance 95A durometer polyurethane formulation, this kit replaces the mushy OEM rubber with proven rigidity.
Show More Show Less
Motor Mount Bolt Set
2X Entries For Our G87 M2 Sweepstakes! We Price Match - Give Us A Call or Chat!
Rein - Corporate Logo
T#:592053
Part#: 22110392551
In Stock
$ 16.50 USD
Free Shipping on orders $49 and up
Used to secure the motor mount brackets, one time use bolts!

Rear Differential Carrier Bushing
Located in the two forward differential mounts - two required
We Price Match - Give Us A Call or Chat!
Meyle - Corporate Logo
T#:35829333
Part#: 33176760287
Special Order: No Guaranteed ETA
$ 15.99 USD
Free Shipping on orders $49 and up
$ 15.99 USD
Free Shipping on orders $49 and up
Over time, the rubber bushings in your BMW can soften, allowing excessive suspension movement. This leads to a decrease in handling and performance. Replacing worn differential bushings will restore handling and improve power delivery.
Show More Show Less