Crankshafts for BMW 1 Series E82 (2008-2013)

VTT S55 Crank Bolt Capture - F8X S55 F3x N55

2X Entries Into Our F80 M3 Sweepstakes

T#:557934

Part#: VTT-S55-CBC

In Stock

Sale - Save 15% $ 129.99

This product was last offered at the strikethrough price on
09-03-2026

$ 110.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 129.99

This product was last offered at the strikethrough price on
09-03-2026

$ 110.49 USD

Add to Wish List

The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Vargas "Spline Lock" Crank Hub Solution - Includes Crank Bolt Capture...

2X Entries Into Our F80 M3 Sweepstakes

T#:558795

Part#: VTT-CRANKHUB-1

In Stock

Sale - Save 15% $ 889.99

This product was last offered at the strikethrough price on
09-03-2026

$ 756.49 USD

Add to Wish List

Qty

Sale - Save 15%

$ 889.99

This product was last offered at the strikethrough price on
09-03-2026

$ 756.49 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Genuine BMW Crankshaft Position Sensor - N52 N54 S85 S65 S63 ...

T#:367850

Part#: 13627525015

In Stock

16% off MSRP $ 175.17

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 146.99 USD

Add to Wish List

Qty

16% off MSRP

$ 175.17

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 146.99 USD

Add to Wish List

This crankshaft position sensor (CPS) provides the engine computer with engine speed data via the harmonic balancer. It mounts off the engine block and reads the front crank pulley to tell the engine what position the engine internals are in. This sensor is crucial for starting the car as the ECU will not allow the engine to start without this signal.

Show More Show Less

Spline Lock Crank Hub Solution W/ Complete Package - N55 S55 ...

2X Entries Into Our F80 M3 Sweepstakes

T#:18733532

Part#: VTT-CRANKHUB-6

Ships in 1 Business Day

Sale - Save 19% $ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 798.99 USD

Add to Wish List

Qty

Sale - Save 19%

$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 798.99 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Genuine BMW Crankshaft hub - N54 3.0L

FOr vehicles with production from 03/2009

T#:32910

Part#: 11237593701

In Stock

5% off MSRP $ 109.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD

Add to Wish List

Qty

5% off MSRP

$ 109.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 103.99 USD

Add to Wish List

Genuine BMW Hub
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02

Fits BMW Engines including:
N54,N54T

Show More Show Less

Sprocket With Grip Disk - N54, N55, S55

T#:401536

Part#: 11418091535

In Stock

4% off MSRP $ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.80 USD

Add to Wish List

Qty

4% off MSRP

$ 33.00

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 31.80 USD

Add to Wish List

Genuine BMW Bearing Shell

T#:33057

Part#: 11247628034

In Stock

Sale - Save 8% $ 41.45

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.99 USD

Limited Qty Sale

Add to Wish List

Qty

Sale - Save 8%

$ 41.45

This product was last offered at the strikethrough price on
08-10-2026

$ 37.99 USD

Limited Qty Sale

Add to Wish List

Genuine BMW Bearing Shell, Red - 50,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Genuine BMW Crankshaft Bearing - N52 3.0L, N54 3.0L, N55 3.0L ...

T#:32669

Part#: 11217627034

Ships in 3 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Green - 56,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Bearing Shell - Red

T#:32564

Part#: 11217512507

Ships in 8 Business Days

5% off MSRP $ 39.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.99 USD

Add to Wish List

Qty

5% off MSRP

$ 39.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 37.99 USD

Add to Wish List

Genuine BMW Bearing Shell, Red - 55,50Mm(+0,50)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F30,F32,F33,F34

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW Crankshaft Bearing Shell - Red 56mm - Multiple BMWs ...

T#:174265

Part#: 11217627035

Ships in 3 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

This is a genuine BMW bearing shell for the crankshaft.

N54 Spline Lock Crank Hub Solution With Complete Package

2X Entries Into Our F80 M3 Sweepstakes

T#:18733525

Part#: VTT-CRANKHUB-3

Ships in 3 Business Days

Sale - Save 15% $ 939.99

This product was last offered at the strikethrough price on
09-03-2026

$ 798.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 939.99

This product was last offered at the strikethrough price on
09-03-2026

$ 798.99 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline N55 S55 Lock Crank Hub Solution W/ Hardware Package

2X Entries Into Our F80 M3 Sweepstakes

T#:18733531

Part#: VTT-CRANKHUB-5

Ships in 10 Business Days

Sale - Save 15% $ 880.99

This product was last offered at the strikethrough price on
09-03-2026

$ 748.84 USD

Add to Wish List

Qty

Sale - Save 15%

$ 880.99

This product was last offered at the strikethrough price on
09-03-2026

$ 748.84 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Genuine BMW Green Crankshaft Bearing

T#:177044

Part#: 11217627038

Ships in 3 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Green - 56,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW Bearing Shell - N52 3.0L, N54 3.0L, N55 3.0L

T#:32670

Part#: 11217627037

Ships in 3 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Yellow - 56,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Spline Lock Crank Hub Solution W/ Crank Bolt Capture - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:18733527

Part#: VTT-CRANKHUB-2

Ships in 10 Business Days

Sale - Save 15% $ 871.99

This product was last offered at the strikethrough price on
09-03-2026

$ 741.19 USD

Add to Wish List

Qty

Sale - Save 15%

$ 871.99

This product was last offered at the strikethrough price on
09-03-2026

$ 741.19 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Vargas "Spline Lock" Crank Hub Solution - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:558924

Part#: VTT-N54-CRANKHUB

Ships in 10 Business Days

Sale - Save 15% $ 818.99

This product was last offered at the strikethrough price on
09-03-2026

$ 696.14 USD

Add to Wish List

Qty

Sale - Save 15%

$ 818.99

This product was last offered at the strikethrough price on
09-03-2026

$ 696.14 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

Spline Lock Crank Hub Solution W/ Hardware Package - N54

2X Entries Into Our F80 M3 Sweepstakes

T#:18733526

Part#: VTT-CRANKHUB-4

Ships in 10 Business Days

Sale - Save 15% $ 880.99

This product was last offered at the strikethrough price on
09-03-2026

$ 748.84 USD

Add to Wish List

Qty

Sale - Save 15%

$ 880.99

This product was last offered at the strikethrough price on
09-03-2026

$ 748.84 USD

Add to Wish List

Anyone with a modified N54 knows the risks involved. Upping the performance of any engine can come with some inherent risk; if we add more boost but not fuel, detonation will occur (or worse). Furthermore, improper installation, maintenance, or operation can turn a perfectly healthy engine into a paperweight. The worst failures, however, are the ones we don't plan for. When the engine simply can't handle the stresses its put under, or the design is such that it simply does not support extreme conditions. Enter the N54 crank hub. Under certain conditions, it likes to spin without warning, even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines that press into the crank and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Vargas spent many months testing, and retesting this design, utilizing well over 10 different samples to come to the final production version. During testing, the final hub managed to break the testing rig before slipping. These have been bench-tested, and real-world tested on the VTT N54 race car spinning 8K RPM, and making well over 900WHP. Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and Turner Motorsport are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.

Show More Show Less

Spline Lock Crank Hub Solution

2X Entries Into Our F80 M3 Sweepstakes

T#:8061334

Part#: VTT-N55-CRANKHUB

Ships in 10 Business Days

Sale - Save 15% $ 818.99

This product was last offered at the strikethrough price on
09-03-2026

$ 696.14 USD

Add to Wish List

Qty

Sale - Save 15%

$ 818.99

This product was last offered at the strikethrough price on
09-03-2026

$ 696.14 USD

Add to Wish List

Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.

Show More Show Less

VTT N54 “Spline Lock” CrankHub Solution Package W/ Crank Bolt Cap...

2X Entries Into Our F80 M3 Sweepstakes

T#:19395579

Part#: VTTCRANKHUBPKG

Ships in 10 Business Days

Sale - Save 15% $ 934.99

This product was last offered at the strikethrough price on
09-03-2026

$ 794.74 USD

Add to Wish List

Qty

Sale - Save 15%

$ 934.99

This product was last offered at the strikethrough price on
09-03-2026

$ 794.74 USD

Add to Wish List

VTT is proud to offer the only complete N54 complete crank hub solution that does NOT require the crank to be drilled for pins. Our hub uses our proprietary “Spline Lock” technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). We spent many months testing, and retesting this design, utilizing well over 10 different samples to come to our final production version. During testing, our final hub managed to break our testing rig before slipping. These have been bench tested, and real-world tested on the VTT N54 race car spinning 8K RPM and making well over 900WHP. This technology means our hub installs the same as a stock hub, no drilling of the crank, which means MUCH less labor is involved and is reversible is ever wanting to be uninstalled leaving no holes in the crank. The “Spline Lock” is ONLY available with the VTT Crank bolt capture for the ULTIMATE Crank Hub solution for your BMW. These parts are designed to be used together, and the spline lock should not run without the CBC VTT “Spline Lock” Crank hubs are CNC manufactured from 440C tool Steel with a Rockwell rating of HRC60 for the ultimate in durability, and toughness. Hub Plus OEM bolt OEM Oil pump sprocket OEM oil sprocket retainer VTT Crank bolt capture

Show More Show Less

Genuine BMW Crank shaft main Bearing - lower - N54 3.0L N52 3.0L N55 ...

T#:32664

Part#: 11217627025

Ships in 3 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Yellow - 65,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F30,F32,F33,F34

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW Crankshaft - N55 3.0L

T#:217481

Part#: 11217580483

Ships in 3 Business Days

3% off MSRP $ 2,506.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,443.99 USD

Add to Wish List

Qty

3% off MSRP

$ 2,506.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,443.99 USD

Add to Wish List

Genuine BMW Crankshaft Without Bearing Shells -

This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F25,F26,F30,F32,F33,F34,F36,

This item fits the following BMW Engines:
N55,

Show More Show Less

Genuine BMW Bearing Shell

T#:32665

Part#: 11217627026

Ships in 3 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Green - 65,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F30,F32,F33,F34

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW Yellow Main Bearing - N54 3.0L N52 3.0L

T#:183149

Part#: 11217627029

Ships in 3 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Yellow - 65,00Mm(0)
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less

N54 Crank Hub Service Kit - Up To 02/2011

For vehicles with production date up to 02/2011

10X Entries Into Our F80 M3 Sweepstakes

T#:2227021

Part#: N54PRCRANKT

In Stock

Sale - Save 3% $ 156.99

This product was last offered at the strikethrough price on
05-03-2026

$ 151.69 USD

Add to Wish List

Qty

Sale - Save 3%

$ 156.99

This product was last offered at the strikethrough price on
05-03-2026

$ 151.69 USD

Add to Wish List

All of the components necessary for service when upgrading to an aftermarket crank hub solution.

Genuine BMW Upper Guide Bearing Shell - N54 3.0L, N55 3.0L, N20 2.0L ...

T#:33043

Part#: 11247576715

Ships in 3 Business Days

7% off MSRP $ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Qty

7% off MSRP

$ 45.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 42.99 USD

Add to Wish List

Genuine BMW Bearing Shell Violet - 50,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E71 X6,E82,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N20,N26,N54,N54T,N55,S55

Show More Show Less

Genuine BMW Crank Pulley With Harmonic Balancer - E82 E84 E88 E90 E92...

T#:32908

Part#: 11237576675

In Stock

8% off MSRP $ 789.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 723.99 USD

Add to Wish List

Qty

8% off MSRP

$ 789.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 723.99 USD

Add to Wish List

The vibration damper, sometimes referred to as the crankshaft pulley, is a crucial part of the engine in your BMW. Not only does this pulley supply power to all of the belt-driven accessories on the engine, it also absorbs the shock of the engine while it is running to help give your engine a smooth, quiet idle. If you vibration damper is failing, it will usually present itself in the form of a squealing noise that sounds like a slipping belt. This is an indication that the rubber ring inside of the vibration damper has dried out and cracked, causing the pulley to slip. If your vibration damper has seen better days, it must be replaced in order to keep your engine running properly, and all of you accessories functional.

Show More Show Less

Genuine BMW Upper Guide Bearing Shell - Green - N52 3.0L, N54 3.0L, N...

T#:190977

Part#: 11218605857

Ships in 5 Business Days

5% off MSRP $ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 51.99 USD

Add to Wish List

Qty

5% off MSRP

$ 54.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 51.99 USD

Add to Wish List

Genuine BMW Guide-Bearing Shell Green - 56,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Bearing Shell - Red

T#:32668

Part#: 11217627031

Ships in 5 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell, Red - 65,00Mm(0)
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N55

Show More Show Less

Genuine BMW Main crank bearing - upper - N55 3.0L, N54 3.0L, N52 3.0L...

T#:194125

Part#: 11218605858

In Stock

Sale - Save 51% $ 51.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 25.66 USD

Add to Wish List

Qty

Sale - Save 51%

$ 51.99

This product was last offered at the strikethrough price on
08-26-2026

$ 25.66 USD

Add to Wish List

Genuine BMW Guide-Bearing Shell Yellow - 56,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW Hex Bolt - Engine Crankshaft Main Bearing Cap Bolt ...

T#:19658

Part#: 11117589711

In Stock

13% off MSRP $ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.19 USD

Add to Wish List

Qty

13% off MSRP

$ 8.27

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 7.19 USD

Add to Wish List

Genuine BMW Hex Bolt - M10X100
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83

Show More Show Less

Genuine BMW Bearing Shell - N54 3.0L N52 3.0L N55 3.0L

T#:32667

Part#: 11217627030

Ships in 5 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Green - 65,00Mm(0)
This item fits the following BMW Chassis:
E71,E82,E90,E92,E93,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N55

Show More Show Less

N54 Crank Hub Service Kit - From 02/2011

For vehicles with production date from 02/2011

10X Entries Into Our F80 M3 Sweepstakes

T#:2227020

Part#: N54POCRANKT

In Stock

Sale - Save 3% $ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 146.61 USD

Add to Wish List

Qty

Sale - Save 3%

$ 150.99

This product was last offered at the strikethrough price on
05-03-2026

$ 146.61 USD

Add to Wish List

All of the components necessary for service when upgrading to an aftermarket crank hub solution.

Genuine BMW Lower Guide Bearing Shell - N55 3.0L, N54 3.0L, N52 3.0L ...

T#:174264

Part#: 11217627033

Ships in 3 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Yellow - 56,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Bearing Shell Yellow

T#:32674

Part#: 11217637064

Ships in 5 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Yellow - 55,75Mm(+0,25)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Bearing Shell - Red

T#:32584

Part#: 11217515383

Ships in 8 Business Days

6% off MSRP $ 79.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD

Add to Wish List

Qty

6% off MSRP

$ 79.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 74.99 USD

Add to Wish List

Genuine BMW Bearing Shell, Red - 64,50Mm(+0,50)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F30,F32,F33,F34

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Genuine BMW Bearing Shell, Red - N55 3.0L, N54 3.0L, N52 3.0L ...

T#:32671

Part#: 11217627039

Ships in 8 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell, Red - 56,00Mm(0)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N52,N52N,N54,N54T,N55

Show More Show Less

N54 3.0L CRANKSHAFT WITHOUT B

T#:548957

Part#: 11217599501

Ships in 8 Business Days

3% off MSRP $ 2,506.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,443.99 USD

Add to Wish List

Qty

3% off MSRP

$ 2,506.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 2,443.99 USD

Add to Wish List

Ensure optimal engine performance with this Original BMW replacement crankshaft, vital to your engine's rotating assembly. When your crankshaft is damaged beyond repair, this genuine BMW part serves as an ideal solution for restoration. Engineered to BMW's exacting standards, it guarantees seamless integration, reliability, and durability, ensuring your engine operates at its best.

Show More Show Less

Bearing Shell Green

T#:32565

Part#: 11217512508

Ships in 7 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell Green - 55,50Mm(+0,50)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F30,F32,F33,F34

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Bearing Shell - Red

T#:32675

Part#: 11217637065

Ships in 7 Business Days

5% off MSRP $ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Qty

5% off MSRP

$ 40.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 38.99 USD

Add to Wish List

Genuine BMW Bearing Shell, Red - 55,75Mm(+0,25)
This item fits the following BMW Chassis:
E82 1M Coupe,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36

Fits BMW Engines including:
N51,N51,N52,N52N,N54,N54T,N55

Show More Show Less

Project Cars

SELECT YOUR BMW

Crankshafts for BMW 1 Series E82 (2008-2013)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results