Ignition for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

Your BMW's ignition system is critical for smooth engine operation. This category contains parts used in the BMW ignition system, including spark plugs, ignition coils, spark plug wires and boots, ignition rotors and caps, distributors and distributor caps. On most 1991 and later model BMWs, your car has what's known as a coil-on-plug system, where each cylinder has its own ignition coil that sits directly atop the spark plug (so you won't have spark plug wires on those BMWs.) A fresh set of spark plugs is an essential part of any BMW engine tune up.

Sub-Categories

Sort By:

Eldor - Corporate Logo
T#:29234309
Part#: 12138616153
In Stock
$ 43.99 USD
Free Shipping on orders $49 and up

Ignition coils are key to the efficiency and performance of your BMW. With a faulty coil the spark plug is not burning the air/fuel mixture properly and that can lead to problems anywhere in the engine and exhaust (including catalytic converters and O2 sensors). Problems with one or more coils will cause a fault code but not always a check engine light. A misfire code may be related to an ignition coil but could be from other things as well. Sometimes a visual inspection of a coil and coil boot will give an indication of a failure. You can also move coils around to different cylinder banks to see if the misfire code follows a suspect coil. We suggest always having one or two coils on hand to keep as spares.

This is the current replacement for some BMW 6 and 8-cylinder engines built in the late 2000s and after. BMW has made numerous changes to ignition coil part numbers in recent years but has approved this part number to work in the vehicles listed below. It's listed as a replacement coil for N20, N55, and S55 engines. In March 2015 BMW approved it for N51/N52 engines. This part number replaces the previous BMW part number 12137594937 for the cars listed below.

Sold per coil. Includes boot and connector.

Show More Show Less
Eldor - Corporate Logo
T#:641259
Part#: 12138657273
In Stock
$ 34.99 USD
Free Shipping on orders $49 and up
Used in a wide variety of BMW engines to ensure proper spark plug operation.
Bav Auto Spark Plug Socket 12" x 5/8"
10X Entries Into Our F80 M3 Sweepstakes
Bav Auto Tools - Corporate Logo
T#:580385
Part#: B8800072
In Stock
Sale - Save 25% $ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 37.99

This product was last offered at the strikethrough price on
05-03-2026

$ 28.49 USD
Free Shipping on orders $49 and up
Magnetic insert holds the spark plug securely in place for easy installation. Works great on many twin can engines where the spark plugs are recessed deep in the cylinder head.

Precision Raceworks - Corporate Logo
T#:4333508
Part#: 201-0091
In Stock
$ 39.99 USD
Free Shipping on orders $49 and up
Replaces individual coils found in the Precision Raceworks Ignition Kit.

Precision Raceworks - Corporate Logo
T#:25374610
Part#: 201-0003
In Stock
$ 69.99 USD
Free Shipping on orders $49 and up
Precision Raceworks BMW N54 Factory Location Replacement Spark Plug Wires are the same high-quality wires featured in our acclaimed BMW N54 High-Performance Ignition Kit. Engineered with low-resistance, high-performance technology, these spark plug wires are a fully custom design. Precision Raceworks is the only manufacturer worldwide to create spark plug wires with boots specifically designed for the N54 BMW, ensuring optimal fitment and superior quality.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:22196341
Part#: VTTS55CLCNV
Ships in 8 Business Days
Starting at $ 335.99 USD
Free Shipping on orders $49 and up
Starting at $ 335.99 USD
Free Shipping on orders $49 and up
VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 3 – Billet Aluminum Coil Brackets in the color of choice 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the S55/N55 head (We ensure proper spring length inside the boot for optimal spring-to-plug contact) *NOTE: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.* **NOTE: THESE BRACKETS FIT STOCK S55 VC, VTT S55 BILLET VC, and MOST N55 made after 2011. If you have an older N55 made before 01/2011. These may not fit. Purchase carefully as items that have been installed or attempted to cannot be returned.**
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38229099
Part#: 601-0108
In Stock
$ 479.99 USD
Free Shipping on orders $49 and up
Rid your BMW's N54 of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit! Precision Raceworks' ignition kit is designed to fit any vehicle with an N54 engine and offers the highest output of any kit on the market! Featuring 100% Plug-&-Play connections, low resistance 50ohm/ft proprietary plug wires, and design technology from Marine and Aerospace applications, these coils are guaranteed to output consistent high voltage and current for optimal ignition system performance and reliability. Every component in this kit meets or exceeds OEM quality and features premium seals for dust and water resistance. While coils do not directly increase horsepower, stock BMW coils can wear out quickly, resulting in underperforming voltage and current output. This often leads to weaker spark intensity and reduced power output. Due to the increased voltage and current output, many customers have seen as much as 20+ whp/wtq gained by switching to Precision Raceworks coils over all other coils on the market! By upgrading to Precision's Performance Ignition Kit, spark quality can be restored, and lost power regained often with the additional power beyond what other coils provide. No software tune is required for installation or operation, but if desired, coil output can be increased to 118mJ from most software tuning companies! Features: Fits any N54 BMW engine w/ the stock intake manifold 100% Plug & Play! Highest Voltage and Current Output Available Low Resistance 50ohm/ft proprietary plug wires Eliminates Ignition Related Misfires Improves Throttle Response Restores Smooth Idle Specifications: Weight: 9lbs Full DME control of ignition coils: Yes Retains factory cooled controlled system: Yes 100% Plug and Play wiring: Yes Connection style: OEM Weatherproof Quick Connect Coil output: Up to 118mJ
Show More Show Less

Precision Raceworks - Corporate Logo
T#:26205125
Part#: 601-0149-1
Ships in 8 Business Days
$ 479.99 USD
Free Shipping on orders $49 and up
Rid your BMW's N55 of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit! Precision Raceworks' ignition kit is designed to fit any vehicle with an N55 engine and offers the highest output of any kit on the market! Featuring 100% Plug-&-Play connections, low resistance 50ohm/ft proprietary plug wires, and design technology from Marine and Aerospace applications, these coils are guaranteed to output consistent high voltage and current for optimal ignition system performance and reliability. Every component in this kit meets or exceeds OEM quality and features premium seals for dust and water resistance. While coils do not directly increase horsepower, stock BMW coils can wear out quickly, resulting in underperforming voltage and current output. This often leads to weaker spark intensity and reduced power output. Due to the increased voltage and current output, many customers have seen as much as 20+ whp/wtq gained by switching to Precision Raceworks coils over all other coils on the market! By upgrading to Precision's Performance Ignition Kit, spark quality can be restored, and lost power regained often with the additional power beyond what other coils provide. No software tune is required for installation or operation, but if desired, coil output can be increased to 118mJ from most software tuning companies!
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38229094
Part#: 601-0108-1
Ships in 6 Business Days
$ 479.99 USD
Free Shipping on orders $49 and up
Rid your BMW's N55 of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit! Precision Raceworks' ignition kit is designed to fit any vehicle with an N55 engine and offers the highest output of any kit on the market! Featuring 100% Plug-&-Play connections, low resistance 50ohm/ft proprietary plug wires, and design technology from Marine and Aerospace applications, these coils are guaranteed to output consistent high voltage and current for optimal ignition system performance and reliability. Every component in this kit meets or exceeds OEM quality and features premium seals for dust and water resistance. While coils do not directly increase horsepower, stock BMW coils can wear out quickly, resulting in underperforming voltage and current output. This often leads to weaker spark intensity and reduced power output. Due to the increased voltage and current output, many customers have seen as much as 20+ whp/wtq gained by switching to Precision Raceworks coils over all other coils on the market! By upgrading to Precision's Performance Ignition Kit, spark quality can be restored, and lost power regained often with the additional power beyond what other coils provide. No software tune is required for installation or operation, but if desired, coil output can be increased to 118mJ from most software tuning companies!
Show More Show Less


Precision Raceworks - Corporate Logo
T#:38195401
Part#: 201-0008
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up
The **BMW N55 Replacement Coil Power Harness** by Precision Raceworks is a premium, direct-fit replacement for the factory harness, designed to enhance reliability and ensure consistent power delivery to the ignition coils. Constructed with high-quality automotive-grade materials, it optimizes electrical conductivity while minimizing the risk of misfires and performance issues. ### **Key Features:** - **OEM-Compatible Design:** Plug-and-play installation for a seamless fit. - **Superior Durability:** Built with high-temperature and abrasion-resistant materials for long-lasting performance. - **Optimized Electrical Flow:** Delivers stable and reliable power to the ignition coils. - **Compatible with All N55 Engines:** Works flawlessly with both stock and upgraded ignition systems. Perfect for both daily driving and high-performance builds, the Precision Raceworks N55 Coil Power Harness ensures smooth and efficient engine operation.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:47679240
Part#: 201-0009
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks BMW N54 REPLACEMENT COIL POWER WIRES are the same wires that come with our famous BMW N54 HIGH PERFORMANCE IGNITION KIT (601-0020), featuring low-resistance oxygen-free copper. These wires are 100% custom designed from the ground up and Precision Raceworks is the only company in the world to produce injection molded coil connectors specific for harness use.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:26238419
Part#: 601-0149
Ships in 7 Business Days
$ 479.99 USD
Free Shipping on orders $49 and up
Rid your BMW's N54 of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit! Precision Raceworks' ignition kit is designed to fit any vehicle with an N54 engine and offers the highest output of any kit on the market! Featuring 100% Plug-&-Play connections, low resistance 50ohm/ft proprietary plug wires, and design technology from Marine and Aerospace applications, these coils are guaranteed to output consistent high voltage and current for optimal ignition system performance and reliability. Every component in this kit meets or exceeds OEM quality and features premium seals for dust and water resistance. While coils do not directly increase horsepower, stock BMW coils can wear out quickly, resulting in underperforming voltage and current output. This often leads to weaker spark intensity and reduced power output. Due to the increased voltage and current output, many customers have seen as much as 20+ whp/wtq gained by switching to Precision Raceworks coils over all other coils on the market! By upgrading to Precision's Performance Ignition Kit, spark quality can be restored, and lost power regained often with the additional power beyond what other coils provide. No software tune is required for installation or operation, but if desired, coil output can be increased to 118mJ from most software tuning companies! Features: Fits any N54 BMW engine w/ the stock intake manifold 100% Plug & Play! Highest Voltage and Current Output Available Low Resistance 50ohm/ft proprietary plug wires Eliminates Ignition Related Misfires Improves Throttle Response Restores Smooth Idle Specifications: Weight: 9lbs Full DME control of ignition coils: Yes Retains factory cooled controlled system: Yes 100% Plug and Play wiring: Yes Connection style: OEM Weatherproof Quick Connect Coil output: Up to 118mJ
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38195374
Part#: 201-0129-1
Back Ordered
$ 69.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks BMW N55/N54 Relocation Replacement Spark Plug Wires are the same high-quality wires featured in our acclaimed BMW N55 High-Performance Ignition Kit. Engineered for low resistance and maximum performance, these custom-designed spark plug wires deliver exceptional reliability. Precision Raceworks is the only manufacturer worldwide to produce spark plug wires with boots specifically designed for N54 BMW engines, guaranteeing a perfect fit and superior quality.
Show More Show Less

Brisk - Corporate Logo
T#:588790
Part#: 2MR14LIR
Ships in 2 Business Days
11% off MSRP $ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping on orders $49 and up
11% off MSRP
$ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping on orders $49 and up
Looking to upgrade your spark plugs but can't decide which brand to go with? Brisk Racing offers a great performance spark plug that gives you a more intense spark without sacrificing OEM reliability. The combination of a center electrode with Iridium contact and ground electrode from Yttrium alloy with copper core cut to spark plug center decreases demand for voltage, it opens the spark gap into the combustion chamber and significantly suppresses flame extinguishing effect at cold starts. In so doing the spark plugs change interval 65,000 miles is maintained. The material used to the spark plugs has a major impact on lifetime and functional properties. While precious metals such as Platinum and Iridium are very resistant to wear but have a considerable demand for high voltage generated by the ignition system. The combination of Iridium center electrode and ground electrodes of special design with Yttrium alloy which is based on Nickel is an ideal solution for maintaining lifetime and spark plug performance improvements. The requirement for power generated by the ignition system is also influenced by the geometric shape of the spark gap. Optimal combination of the spark gap and the reduced demand for form by appropriate choice of electrode material effect synergic on the improvement of spark plug performance. Spark Plug Specs: Gap - 0.8mm Thread - 12mm Reach - 26.1mm Hexagon - 14mm Bi-Hex Seat - gasket Design - Iridium Performance Resistor - Yes Projected - Yes
Show More Show Less
Brisk Silver Racing 2MOR10S Spark Plug - N20 N54 N55 S55 S63 ...
This spark plug is 1 degree colder than the stock N54 plug
Brisk - Corporate Logo
T#:588791
Part#: 2MOR10S
In Stock
11% off MSRP $ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping on orders $49 and up
11% off MSRP
$ 17.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 15.99 USD
Free Shipping on orders $49 and up
Brisk Silver Racing Spark Plugs are the best solution for high performance and racing engines. Silver Spark Plugs provide many unique and beneficial characteristics, Silver is taking spark plug technology to a whole new level, here are many reasons why our Brisk Silver Racing Spark Plugs are beneficial for your engines performance. Silver is the best conductor of any metal! It conducts 560% more electricity & 481% more heat than Platinum, and 276% more electricity & 177% more heat than Iridium. Silver spark plug electrodes transfer electricity & heat better than any other spark plug material resulting in the most powerful spark! This is beneficial for a full complete combustion of the available fuel and air in the combustion chamber, combustion efficiency creates horsepower gains. Key Benefits and Applications of Brisk Silver Racing Spark Plugs: Silver is the best Electric and Heat Conductor - the best material for performance and racing spark plugs Superior Ignition Ability Increases Engine Power Lower Required Supplied Ignition Voltage Good Resistance to Fouling and Easier Starts Race Engines and Engines with Hard to Ignite Fuels Supercharged / Turbocharged / Nitrous engines Excellent for Total Loss Ignition Systems Excellent Spark Plug Choice for any Vehicle, Stock or Modified, even for High Mileage Vehicles and Vehicles With Oil Consumption Problems Spark Plug Specs: 12mm thread 1.05"(26.1mm) reach 14mm Bi-Hex gasket seat non-projection tip resistor silver center el. cut-back ground electrode *Replacement for NGK SILZKBR9F8S (BMW# 12120042724) *One heat range colder than NGK 97506 SILZKBR8D8S
Show More Show Less

Precision Raceworks - Corporate Logo
T#:38195381
Part#: 501-0074
In Stock
$ 13.99 USD
Free Shipping on orders $49 and up
Precision Raceworks BMW N55/N54 Relocation Replacement Spark Plug Wires are the same high-quality wires featured in our acclaimed BMW N55 High-Performance Ignition Kit. Engineered with low-resistance, high-performance technology, these spark plug wires are a completely custom design. As the sole manufacturer worldwide to produce spark plug wires with boots specifically tailored for N54 BMW engines, Precision Raceworks guarantees precise fitment and superior quality.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:21834316
Part#: 501-0075-1
In Stock
$ 13.99 USD
Free Shipping on orders $49 and up
Precision Raceworks BMW N55/N54 Relocation Replacement Spark Plug Wires are the same high-quality wires featured in our acclaimed BMW N55 High-Performance Ignition Kit. Engineered with low-resistance, high-performance technology, these spark plug wires are a completely custom design. As the sole manufacturer worldwide to produce spark plug wires with boots specifically tailored for N54 BMW engines, Precision Raceworks guarantees precise fitment and superior quality.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:35256049
Part#: 601-0150
Ships in 9 Business Days
$ 479.99 USD
Free Shipping on orders $49 and up
Rid your BMW's N54 of misfires, sluggish throttle response, rough idle, and power loss with Precision Raceworks' High-Performance Ignition Kit! Precision Raceworks' ignition kit is designed to fit any vehicle with an N54 engine and offers the highest output of any kit on the market! Featuring 100% Plug-&-Play connections, low resistance 50ohm/ft proprietary plug wires, and design technology from Marine and Aerospace applications, these coils are guaranteed to output consistent high voltage and current for optimal ignition system performance and reliability. Every component in this kit meets or exceeds OEM quality and features premium seals for dust and water resistance. While coils do not directly increase horsepower, stock BMW coils can wear out quickly, resulting in underperforming voltage and current output. This often leads to weaker spark intensity and reduced power output. Due to the increased voltage and current output, many customers have seen as much as 20+ whp/wtq gained by switching to Precision Raceworks coils over all other coils on the market! By upgrading to Precision's Performance Ignition Kit, spark quality can be restored, and lost power regained often with the additional power beyond what other coils provide. No software tune is required for installation or operation, but if desired, coil output can be increased to 118mJ from most software tuning companies! Features: Fits any N54 BMW engine w/ the stock intake manifold 100% Plug & Play! Highest Voltage and Current Output Available Low Resistance 50ohm/ft proprietary plug wires Eliminates Ignition Related Misfires Improves Throttle Response Restores Smooth Idle Specifications: Weight: 9lbs Full DME control of ignition coils: Yes Retains factory cooled controlled system: Yes 100% Plug and Play wiring: Yes Connection style: OEM Weatherproof Quick Connect Coil output: Up to 118mJ
Show More Show Less

Rennline - Corporate Logo
T#:44495471
Part#: M138
Ships in 5 Business Days
$ 37.00 USD
Free Shipping on orders $49 and up
$ 37.00 USD
Free Shipping on orders $49 and up
Replace that burnt or damaged coil!
Rennline - Corporate Logo
T#:44495474
Part#: M138KT
Ships in 5 Business Days
$ 222.00 USD
Free Shipping on orders $49 and up
$ 222.00 USD
Free Shipping on orders $49 and up
Vargas N54 To B58 Coil Conversion Kit
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:7292057
Part#: VTT-N54-B58-CNV
Ships in 10 Business Days
Sale - Save 5% $ 677.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 641.87 USD
Free Shipping on orders $49 and up
Sale - Save 5%
$ 677.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 641.87 USD
Free Shipping on orders $49 and up
VTT is proud to offer its very own N54 to B58 Coil conversion kit for the N54 platform. While factory coil upgrades such as S55, and our own N54 coil upgrades do provide more spark, the BMW B58 ignition coils are extremely robust and can support well over 1000whp with no issues. This means a plug, and play affordable solution that fits like stock, and looks AMAZING doing so! Vargas's 6061-T6 Billet bracket comes in a variety of colors including matching shades for every N54 Valve Cover we offer (even the cast wrinkle). This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to! The kit comes with the following: 1 – Billet Aluminum Coil Bracket in the color of choice or Genuine Carbon Fiber 6 – Plug and play VTT wiring harnesses 6 – Custom VTT stalks to convert the B58 coils to the N54 head (We ensure proper spring length inside the boot for optimal spring to plug contact) 6 – Coils in the color of choice (optional) **Note: This only fits the stock N54 Valve covers or Vargas Billet and Cast Valve Covers.
Show More Show Less


Precision Raceworks - Corporate Logo
T#:18169670
Part#: 501-0074-1
In Stock
$ 13.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks BMW N55 RELOCATION REPLACEMENT SPARK PLUG WIRES are the same wires that come with our famous BMW N55 HIGH PERFORMANCE IGNITION KIT (601-0021-1), featuring low-resistance high-performance spark plug wires. These wires are 100% custom-designed from the ground up, and Precision Raceworks is the only company in the world to produce plug wires with boots specific for your N55 BMW to ensure proper fitment and quality.
Show More Show Less
Precision Raceworks - Corporate Logo
T#:38195376
Part#: 501-0076
Ships in 9 Business Days
$ 13.99 USD
Free Shipping on orders $49 and up
Precision Raceworks BMW N55/N54 Relocation Replacement Spark Plug Wires are the same high-quality wires featured in our acclaimed BMW N55 High-Performance Ignition Kit. Engineered with low-resistance, high-performance technology, these spark plug wires are a completely custom design. As the sole manufacturer worldwide to produce spark plug wires with boots specifically tailored for N54 BMW engines, Precision Raceworks guarantees precise fitment and superior quality.
Show More Show Less

Precision Raceworks - Corporate Logo
T#:47679252
Part#: 501-0075
Ships in 9 Business Days
$ 13.99 USD
Free Shipping on orders $49 and up
The Precision Raceworks BMW N54 FACTORY LOCATION REPLACEMENT SPARK PLUG WIRES are the same wires that come with our famous BMW N54 HIGH PERFORMANCE IGNITION KIT (601-0021), featuring low-resistance high-performance spark plug wires. These wires are 100% custom-designed from the ground up, and Precision Raceworks is the only company in the world to produce plug wires with boots specific for your N54 BMW to ensure proper fitment and quality.
Show More Show Less