BMW Intake Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:
Turner Motorsport N52 Silicone Intake Boot - Black - E8x 128i, E9x 325, 328, 330
Turner Motorsport N52 Silicone Intake Boot - Black - E8x 128i, E9x 32...
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:400812
Part#: 006655TMS01
In Stock
Sale - Save 41% $ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 71.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 41%
$ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 71.99 USD
Free Shipping on orders $49 and up
Add to Wish List

The intake boot is a regular issue especially for BMW's, nearly all vehicles have a boot manufactured from rubber with an accordion section in the design for flexibility. This flexible section is typically where the failure comes from, leading to vacuum leak engine codes, rough idle, and increase fuel consumption. 

When you upgrade to a Turner silicone intake boot you get a perfect fit that will not only outlast the OE design (meaning any vacuum leaks and rough idle), while also smoothing out airflow within the intake tract. This boot also eliminates the factory intake resonator giving your engine a much more aggressive sound under the hood especially at higher rpm. Available in black or Turner blue color, our intake boot offers either a pop of color or a cohesive, complementary look in your engine bay.

The Turner Motorsport silicone intake boot is manufactured with 5 layers of wire reinforced silicone to prevent collapse under load. Engineered in-house utilizing 3D scanning technology, this boot offers perfect fitment with the factory air box and either single stage or three stage (high output N52) intake manifolds.

Install as a standalone reliability improvement or in addition to our three stage intake manifold and Turner performance tune (available here).

Replaces OE intake boot 13717536004.

Features:

  • 5 layers of wire reinforced silicone
  • Perfect fitment with factory airbox
  • Compatible with single stage or three stage manifold
  • Installation hardware included

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i Coupe Convertible
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi - Coupe
2007-2013 E93 BMW 328i - Convertible

Show More Show Less
135i Hot Side Intake Duct
135i Hot Side Intake Duct
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:26971816
Part#: 025947TMS06KT
In Stock
Sale - Save 15% $ 218.99

This product was last offered at the strikethrough price on
06-14-2026

$ 186.14 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 15%
$ 218.99

This product was last offered at the strikethrough price on
06-14-2026

$ 186.14 USD
Free Shipping on orders $49 and up
Add to Wish List
BMS Replacement DCI Filters - Red
BMS Replacement DCI Filters - Red
Burger Motorsports - Corporate Logo
T#:38890884
Part#: BMS-N54-DCIR-R
Back Ordered
$ 79.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 79.00 USD
Free Shipping on orders $49 and up
Add to Wish List
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less
Burger Motorsport 4 BAR TMAP Sensor & Adapter - BMW N55/N54/S55 (2007-2012 Type A Connector)
Burger Motorsport 4 BAR TMAP Sensor & Adapter - BMW N55/N54/S55 (2007...
Burger Motorsports - Corporate Logo
T#:34885402
Part#: 4BAR TMAP
In Stock
$ 139.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 139.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi.
E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve
E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:389684
Part#: VTT-N54-PCV
In Stock
$ 68.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 68.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of  closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.
Show More Show Less
Black Market Parts Extended Intake Manifold Studs - N54/N55/S55
Black Market Parts Extended Intake Manifold Studs - N54/N55/S55 ...
Precision Raceworks - Corporate Logo
T#:5229478
Part#: 501-0018
In Stock
$ 39.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 39.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The Black Market Parts Extended Intake Manifold Studs are the same great product that come with our N54/N55/S55 Port Injection Kit. These studs are compatible with any port injection kit and can even be used with stock manifolds. Each stud is designed like factory and is removed/installed with the same e-torx socket the factory 7mm studs are removed with so no switching tools or specialty stud installers needed.
Show More Show Less
Precision Raceworks 2.5" Replacement Cone Air Filters - Pair of Filters
Precision Raceworks 2.5" Replacement Cone Air Filters - Pair of Filte...
Precision Raceworks - Corporate Logo
T#:38229120
Part#: 622-0136
In Stock
$ 64.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 64.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The Precision Raceworks Replacement Air Filters are a perfect choice when looking to replace your dirty or damaged PR inlet filters.
BMS Replacement DCI Filters - Blue
BMS Replacement DCI Filters - Blue
Burger Motorsports - Corporate Logo
T#:38890886
Part#: BMS-N54-DCIR-B
In Stock
$ 89.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 89.00 USD
Free Shipping on orders $49 and up
Add to Wish List
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less
MAP Sensor
MAP Sensor
Vitesco Technologies - Corporate Logo
T#:39329317
Part#: 13628644432
In Stock
$ 110.00

This product was last offered at the strikethrough price on
08-12-2026

$ 100.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 100.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The manifold absolute pressure sensor (MAP sensor) is one of the sensors used in your N55 engine's electronic control system. The manifold absolute pressure sensor provides instantaneous manifold pressure information to the engine's electronic control unit (ECU/DME). The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion, efficiency, and ignition timing.
Show More Show Less
Burger Motorsports Upgraded Intake Coupler - N55 BMW
Burger Motorsports Upgraded Intake Coupler - N55 BMW
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:556785
Part#: BMS-E-N55-INT-C
In Stock
$ 24.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 24.00 USD
Free Shipping on orders $49 and up
Add to Wish List
When upgrading your intake, such as with the Burger Motorsports Performance Intake, your coupler is only good for stock vehicles. At boost pressure higher than stock, the stock accordion coupler is likely to collapse, suffocating your engine from air flow and potentially causing it to stall. With this 5 layer silicon upgraded coupler from Burger Motorsports, you can run your car as hard as possible even with upgraded turbos or port injection and will never have to worry about the coupler collapsing.
Show More Show Less
Replacement N55 Performance Filter - Red
Replacement N55 Performance Filter - Red
Burger Motorsports - Corporate Logo
T#:38890883
Part#: BMSREPAFNFFR
In Stock
$ 70.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 70.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants
Show More Show Less
Eventuri Filter Cleaning Kit
Eventuri Filter Cleaning Kit
Eventuri - Corporate Logo
T#:396394
Part#: EVE-FLC
Ships in 6 Business Days
$ 30.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 30.00 USD
Free Shipping on orders $49 and up
Add to Wish List
This filter cleaning kit powers away dirt and contaminants leaving your filter in like-new condition.
Vitesco Mass Air Flow Sensor - N55, N52
Vitesco Mass Air Flow Sensor - N55, N52
Vitesco Technologies - Corporate Logo
T#:33512934
Part#: 13627593624
In Stock
$ 219.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 219.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The MAF of your vehicle decides the quantity of fuel that is fed to the injectors according to the volume of air coming through the intake.
BMW E8X E9X Turbo Inlet Flange Adapter Kit 1.75" To 2"
BMW E8X E9X Turbo Inlet Flange Adapter Kit 1.75" To 2"
Precision Raceworks - Corporate Logo
T#:21637194
Part#: 501-0026
In Stock
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 49.99 USD
Free Shipping on orders $49 and up
Add to Wish List

BMW E8X E9X Turbo Inlet Flange Adapter Kit 1.75" To 2" by Turner Motorsport is designed to facilitate a seamless upgrade for your turbo system. This precision adapter kit allows BMW E9X and E8X owners to run 2" relocated inlets on stock turbos with confidence, ensuring a secure fit without the risk of the inlets slipping off.

  • Secure Fit: Prevents inlets from slipping off the turbo flange, ensuring a tight and reliable connection.
  • Precision Engineering: Made from high-quality materials for a perfect fit and enhanced performance.
  • Easy Upgrade: Allows for easy transition from 1.75" to 2" turbo inlets, providing improved airflow and performance.
  • Durable Construction: Built to withstand high pressures and temperatures, ensuring long-term reliability.
  • Compatible Design: Specifically designed for BMW E8X and E9X models, making it a perfect fit for your vehicle.
Show More Show Less
Precision Raceworks Relocated Inlet Kit - Upgraded Turbos (2") - BMW E82/88 E9X N54 3.0L
Precision Raceworks Relocated Inlet Kit - Upgraded Turbos (2") - BMW ...
Precision Raceworks - Corporate Logo
T#:38229118
Part#: 601-0027
Ships in 10 Business Days
$ 339.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 339.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The Precision Raceworks N54 Relocated Inlet Kit is the highest flowing and highest quality inlet system available for the N54 on the market! Since our development, many others have followed making silicone inlet systems. Don’t be fooled into thinking all kits are the same, our design features wire inlayed high temp silicone to prevent melting or collapsing due to heat and vacuum of the turbo. Best of all our kit does not require you to butcher your factory harness to relocate the coolant expansion tank. Our kit includes a plug-and-play extension harness featuring OEM weatherproof connectors for easy installation. *NOT COMPATIBLE WITH RHD VEHICLES
Show More Show Less
BMC Filter Cleaning Kit
BMC Filter Cleaning Kit
BMC - Corporate Logo
T#:590913
Part#: WA250-500
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 24.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Eventuri Replacement Air Filter Element for Carbon Intake Kit - E46 M3
Eventuri Replacement Air Filter Element for Carbon Intake Kit - E46 M...
Eventuri - Corporate Logo
T#:640792
Part#: EVE-661-G2-FTR
Ships in 3 Business Days
$ 95.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 95.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Replacement filter for the Eventuri E46 M3 Carbon intake system, comes ready to install.
Forge Motorsport Valve Service Kit
Forge Motorsport Valve Service Kit
Forge - Corporate Logo
T#:28271173
Part#: FMDV004S
Back Ordered
Sale - Save 12% $ 23.99

This product was last offered at the strikethrough price on
08-29-2026

$ 21.18 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 12%
$ 23.99

This product was last offered at the strikethrough price on
08-29-2026

$ 21.18 USD
Free Shipping on orders $49 and up
Add to Wish List
BMS High Flow Silicone Inlets - 2" Opening For Hybrid Turbos - BMW N54 3.0L
BMS High Flow Silicone Inlets - 2" Opening For Hybrid Turbos - BMW N5...
Burger Motorsports - Corporate Logo
T#:14684349
Part#: N54HFSILINLETS
Ships on Sep 16, 2026
$ 229.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 229.00 USD
Free Shipping on orders $49 and up
Add to Wish List
These high-quality BMS N54 silicone inlets replace your flimsy and restrictive plastic N54 BMW inlets reducing restriction and dramatically improving airflow, top-end boost, and performance. Includes all required hardware and is compatible with both factory-style diverter valves and blow-off valve kits. Available in 1.75" inlets for factory turbos or 2" inlets for hybrid and aftermarket turbos. Compatible with BMS DCI and all other N54 intake systems. FEATURES AND BENEFITS Huge 30-50whp top-end power gains Replaces your restrictive factory intake system Retains OEM engine bay look Durable high-temperature reinforced silicone for long life Compatible with both RHD and LHD vehicles Includes required hardware
Show More Show Less
Forge Motorsport Atmospheric Blowoff Valve - BMW N55 3.0L
Forge Motorsport Atmospheric Blowoff Valve - BMW N55 3.0L
Forge - Corporate Logo
T#:46890666
Part#: FMEDV104A
Special Order: No Guaranteed ETA
Sale - Save 10% $ 379.99

This product was last offered at the strikethrough price on
08-29-2026

$ 341.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 379.99

This product was last offered at the strikethrough price on
08-29-2026

$ 341.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. This particular E-DV is designed as an Atmospheric Blowoff Valve, venting boosted air to the atmosphere without causing any check engine lights or service lights.
Show More Show Less
BMS Replacement DCI Filters - White
BMS Replacement DCI Filters - White
Burger Motorsports - Corporate Logo
T#:38890885
Part#: BMS-N54-DCIR-W
Ships on Sep 16, 2026
$ 84.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 84.00 USD
Free Shipping on orders $49 and up
Add to Wish List
High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.
Show More Show Less
Burger Motorsports 2007-2012 TypeA 4BAR Adapter - E82/88 E9X E6X N54 N55 S55
Burger Motorsports 2007-2012 TypeA 4BAR Adapter - E82/88 E9X E6X N54 ...
Burger Motorsports - Corporate Logo
T#:599636
Part#: TYPEA4BARADAPTER
Ships in 2 Business Days
$ 35.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 35.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716
Show More Show Less
OEM Hella Boost Pressure MAP Sensor - BMW N54 N55 3.0L
OEM Hella Boost Pressure MAP Sensor - BMW N54 N55 3.0L
Hella - Corporate Logo
T#:11595374
Part#: 13629797773
In Stock at Vendor
$ 153.99

This product was last offered at the strikethrough price on
05-07-2026

$ 149.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 149.99 USD
Free Shipping on orders $49 and up
Add to Wish List
This sensor is used in the air intake system to monitor boost for protection from over-boost.
Turner Charge Pipe Intercooler C Clip - BMW M57 N54 N55
Turner Charge Pipe Intercooler C Clip - BMW M57 N54 N55
10X Entries Into Our F80 M3 Sweepstakes
Turner Motorsport - Corporate Logo
T#:638414
Part#: 006617LA01-01
In Stock
Sale - Save 89% $ 34.99

This product was last offered at the strikethrough price on
05-03-2026

$ 3.90 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 89%
$ 34.99

This product was last offered at the strikethrough price on
05-03-2026

$ 3.90 USD
Free Shipping on orders $49 and up
Add to Wish List
This clip secures the intercooler charge piping to both the inlet and outlet of the intercooler. (not for use with the throttle body connection) Priced each and appropriate for both sides.
Precision Raceworks OE-Spec Intake Manifold O-Rings - 6 Pack - BMW N54/N55/S55 3.0L
Precision Raceworks OE-Spec Intake Manifold O-Rings - 6 Pack - BMW N5...
Precision Raceworks - Corporate Logo
T#:38229122
Part#: 501-0001
In Stock
$ 12.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 12.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The Black Market Parts OE-Spec Intake Manifold O-Rings kit is made with Viton capable of withstanding all fuels (including e85) as well as oils. These o-rings are made to OE specifications and are a direct replacement for the seals found in your factory intake manifold. These o-rings are also used in other BMP products such as our N54/N55 Port Injection Kit, S55 Port Injection kit, N54 Performance Intake Manifold, and N55 Performance Intake Manifold.
Show More Show Less
4MM Silicone Vacuum Hose - Red - 9 Feet
4MM Silicone Vacuum Hose - Red - 9 Feet
Forge - Corporate Logo
T#:370918
Part#: VC04R
In Stock
Sale - Save 10% $ 15.99

This product was last offered at the strikethrough price on
08-29-2026

$ 14.36 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 15.99

This product was last offered at the strikethrough price on
08-29-2026

$ 14.36 USD
Free Shipping on orders $49 and up
Add to Wish List

Enhance Engine Performance with Silicone Vacuum Line

Upgrade your car's vacuum system with the Silicone Vacuum Line, a vital component that significantly impacts engine performance. Engineered to resist heat and contaminants, this silicone hose promises exceptional durability, ensuring prolonged and reliable operation.

Featuring an inner diameter of 4mm and a vibrant red color, this silicone hose arrives in a 9-foot section, offering the flexibility to customize lengths as needed. Damaged vacuum hoses can lead to various performance issues, from rough idling to engine starting problems. Promptly replace worn-out hoses to optimize your vehicle's overall performance.

Show More Show Less
Replacement Intake Coupler - Priced Each
Replacement Intake Coupler - Priced Each
Not for sale or use in the state of California.
Burger Motorsports - Corporate Logo
T#:583384
Part#: INTAKECOUPLER
In Stock
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
BMS Replacement Intercooler For E Chassis BMW
BMS Replacement Intercooler For E Chassis BMW
07'-13' Model years
Burger Motorsports - Corporate Logo
T#:38621402
Part#: BMS-INTCLR-N5455
Ships on Sep 16, 2026
$ 329.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 329.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The BMS N54/N55 Replacement E-Chassis Intercooler Upgrade for BMW improves cooling efficiency, boosts wheel horsepower, and maintains performance during extended driving sessions. With a larger core and expanded surface area compared to the stock intercooler, it reduces pressure drop and significantly enhances cooling capacity. Expect peak gains of around 10whp, with sustained increases of 20-30whp during long pulls or repeated runs versus the factory intercooler. This E-Chassis upgrade is ideal for setups up to 500whp, while the 7.5" RACE intercooler supports builds reaching 1000whp. Designed as a direct-fit replacement, the BMS intercooler is fully reversible and requires no additional hardware for installation. E-Chassis BMW FMIC Dimensions: 20" x 5.25" x 5.25".
Show More Show Less
N54 Diverter Valve Shims - Set Of Four
N54 Diverter Valve Shims - Set Of Four
Forge - Corporate Logo
T#:384401
Part#: FMDV-SHIM
Ships in 5 Business Days
Sale - Save 10% $ 4.00

This product was last offered at the strikethrough price on
08-29-2026

$ 3.60 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 4.00

This product was last offered at the strikethrough price on
08-29-2026

$ 3.60 USD
Free Shipping on orders $49 and up
Add to Wish List
These shims allow you to manually adjust preload on Forge N54 Diverter Valves.
Front Mount Intercooler - N55
Front Mount Intercooler - N55
Forge - Corporate Logo
T#:373768
Part#: FMINTBM
Ships in 5 Business Days
Sale - Save 10% $ 1,271.99

This product was last offered at the strikethrough price on
08-29-2026

$ 1,144.04 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 1,271.99

This product was last offered at the strikethrough price on
08-29-2026

$ 1,144.04 USD
Free Shipping on orders $49 and up
Add to Wish List
Forge Motorsport discovered the perfect combination for your N55 with this bar and plate design intercooler. The intercooler averaged drops of 15 degrees celcius compared to a stock intercooler. Installation of this larger intercooler is an easy bolt-on without any modification or cutting necessary. Complete kit includes new silicone hoses and clamps with instructions.
Show More Show Less
BMW N54 BOV Vaccuum Adapter
BMW N54 BOV Vaccuum Adapter
Burger Motorsports - Corporate Logo
T#:589530
Part#: N54BOVVACADPT
Ships on Sep 16, 2026
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Forge Motorsport Electronic Diverter Valve (E-DV) - BMW N55 3.0L
Forge Motorsport Electronic Diverter Valve (E-DV) - BMW N55 3.0L ...
Forge - Corporate Logo
T#:46890667
Part#: FMEDV104R
Ships in 2 Business Days
Sale - Save 10% $ 379.99

This product was last offered at the strikethrough price on
08-29-2026

$ 341.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 379.99

This product was last offered at the strikethrough price on
08-29-2026

$ 341.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Forge Motorsport's new E-DV (Electronic Diverter Valve) is a British-designed and manufactured solution that combines cutting-edge technology with ease of use, ensuring high quality and plug-and-play installation. This performance unit replaces the factory diverter valve, which is known to fail and can lead to boost loss or spikes, check engine lights, limp mode, and low power output. The E-DV is designed as a Recirculating Diver Valve, recirculating boosted air back to the intake system like the factory diverter valve, but with quicker and enhanced response times.
Show More Show Less
Precision Raceworks Relocated Inlet Kit - Stock Turbos (1.75") - BMW E82/88 E9X N54 3.0L
Precision Raceworks Relocated Inlet Kit - Stock Turbos (1.75") - BMW ...
Precision Raceworks - Corporate Logo
T#:38229117
Part#: 622-0131
Ships in 6 Business Days
$ 349.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 349.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The Precision Raceworks N54 Relocated Inlet Kit is the highest flowing and highest quality inlet system available for the N54 on the market! Since our development, many others have followed making silicone inlet systems. Don’t be fooled into thinking all kits are the same, our design features wire inlayed high temp silicone to prevent melting or collapsing due to heat and vacuum of the turbo. Best of all our kit does not require you to butcher your factory harness to relocate the coolant expansion tank. Our kit includes a plug-and-play extension harness featuring OEM weatherproof connectors for easy installation. *NOT COMPATIBLE WITH RHD VEHICLES
Show More Show Less
Precision Raceworks T-Map Extension Harness - BMW E9x/E8x N54 3.0L
Precision Raceworks T-Map Extension Harness - BMW E9x/E8x N54 3.0L ...
Precision Raceworks - Corporate Logo
T#:47679241
Part#: 201-0133
Ships in 9 Business Days
$ 34.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 34.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The Precision Raceworks BMW E9x/E8x T-Map Extension Harness is an excellent way to extend the length of your existing harness for the charge pipe T-Map sensor without having to cut and splice any wires. Additionally, this harness adapts your OEM map sensor wire to a 3.5 bar map sensor connector. An absolute must for Forward Facing Manifolds and Charge Pipes from Precision Raceworks or any other company offering a pipe that relocates the map sensor, resulting in the need to extend the harness.
Show More Show Less
Precision Raceworks 2.5" Replacement Cone Air Filter - Single Filter
Precision Raceworks 2.5" Replacement Cone Air Filter - Single Filter ...
Precision Raceworks - Corporate Logo
T#:38229119
Part#: 201-0092
Ships in 9 Business Days
$ 39.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 39.99 USD
Free Shipping on orders $49 and up
Add to Wish List
The Precision Raceworks Replacement Air Filters are a perfect choice when looking to replace your dirty or damaged PR inlet filters.
Forge Silicone Vacuum Hoses
Forge Silicone Vacuum Hoses
Forge - Corporate Logo
T#:558490
Part#: FORGEVAC
In Stock
Sale - Save 10% $ 14.99

This product was last offered at the strikethrough price on
08-29-2026

Starting at $ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 14.99

This product was last offered at the strikethrough price on
08-29-2026

Starting at $ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List
Car suffering from vacuum leaks? Choose from a 4mm, 5mm, or 6mm diameter vacuum hose from Forge to fix your leak and bring your BMW back to life.
4MM Silicone Vacuum Hose - Blue - 9 Feet
4MM Silicone Vacuum Hose - Blue - 9 Feet
Forge - Corporate Logo
T#:370917
Part#: VC04
In Stock
Sale - Save 10% $ 14.99

This product was last offered at the strikethrough price on
08-29-2026

$ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 14.99

This product was last offered at the strikethrough price on
08-29-2026

$ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List
Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter. 
4MM Silicone Vacuum Hose - Black - 9 Feet
4MM Silicone Vacuum Hose - Black - 9 Feet
Forge - Corporate Logo
T#:370919
Part#: VC04B
In Stock
Sale - Save 10% $ 14.99

This product was last offered at the strikethrough price on
08-29-2026

$ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 14.99

This product was last offered at the strikethrough price on
08-29-2026

$ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List
Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter. 
3MM Silicone Vacuum Hose - Red - 9 Feet
3MM Silicone Vacuum Hose - Red - 9 Feet
Forge - Corporate Logo
T#:370915
Part#: VC03R
In Stock
Sale - Save 10% $ 14.99

This product was last offered at the strikethrough price on
08-29-2026

$ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List
Sale - Save 10%
$ 14.99

This product was last offered at the strikethrough price on
08-29-2026

$ 13.46 USD
Free Shipping on orders $49 and up
Add to Wish List

Upgrade Your BMW with Forge 3MM Silicone Vacuum Hose - Red - 9 Feet

Upgrade your BMW's vacuum system with the Forge 3MM Silicone Vacuum Hose in Red, a high-quality solution designed for optimal performance and durability. This 9-foot silicone vacuum hose provides superior flexibility and resistance to extreme temperatures, making it ideal for various automotive applications. Engineered with precision, it ensures reliable vacuum pressure for efficient engine operation and component functionality. Whether you're replacing worn-out hoses or customizing your BMW's vacuum setup, the Forge Silicone Vacuum Hose offers reliability and performance you can trust.

  • High-quality silicone construction for durability
  • Superior flexibility for easy installation
  • Resistant to extreme temperatures
  • Ensures reliable vacuum pressure for efficient engine operation
  • Ideal for various automotive applications

Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter. 

Show More Show Less
BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve
BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...
Burger Motorsports - Corporate Logo
T#:20815185
Part#: BMSWMITC
In Stock
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 59.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA
Show More Show Less
1 Gallon Methanol Tank - Clear/White
1 Gallon Methanol Tank - Clear/White
Burger Motorsports - Corporate Logo
T#:558165
Part#: 1G-MT-CL
In Stock
$ 30.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 30.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less
BMS DDP5800 Water/Methanol Injection Pump
BMS DDP5800 Water/Methanol Injection Pump
Burger Motorsports - Corporate Logo
T#:20815186
Part#: BMSDDP5800
Ships in 1 Business Day
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 120.00 USD
Free Shipping on orders $49 and up
Add to Wish List
The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.
Show More Show Less
2 Gallon Low Profile Universal Methanol Tank
2 Gallon Low Profile Universal Methanol Tank
Burger Motorsports - Corporate Logo
T#:20946755
Part#: 2G-ULPMT
In Stock
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 179.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"
Show More Show Less
Burger Motorsport JB4-Compatible Water/Methanol Injection System - N20 N54/55 S55 S63 B46/48 B58
Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...
Burger Motorsports - Corporate Logo
T#:558163
Part#: BMS-WMI
Ships on Sep 16, 2026
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 226.99 USD
Free Shipping on orders $49 and up
Add to Wish List
Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!
Show More Show Less
1.25 Gallon Heavy-Duty Universal Methanol Tank
1.25 Gallon Heavy-Duty Universal Methanol Tank
Burger Motorsports - Corporate Logo
T#:20946761
Part#: 1.25G-UMT-CL
Ships on Sep 16, 2026
$ 69.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 69.00 USD
Free Shipping on orders $49 and up
Add to Wish List
This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 ​Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"
Show More Show Less
Water/Methanol Injection Hose - 20'
Water/Methanol Injection Hose - 20'
Burger Motorsports - Corporate Logo
T#:21176944
Part#: BMS-WMI-IL
In Stock
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 31.99 USD
Free Shipping on orders $49 and up
Add to Wish List
BMS Water/Methanol Injection (WMI) Solenoid W/ Filter
BMS Water/Methanol Injection (WMI) Solenoid W/ Filter
Burger Motorsports - Corporate Logo
T#:21176934
Part#: BMS-WMI-SOL
Ships on Sep 16, 2026
$ 75.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 75.00 USD
Free Shipping on orders $49 and up
Add to Wish List
This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.
Show More Show Less
WMI Inline Filter
WMI Inline Filter
Burger Motorsports - Corporate Logo
T#:21176933
Part#: BMS-WMI-FIL
Ships on Sep 16, 2026
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
$ 15.00 USD
Free Shipping on orders $49 and up
Add to Wish List
This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.
Show More Show Less
Super Atomizing Water/Methanol Injection Nozzles
Super Atomizing Water/Methanol Injection Nozzles
Burger Motorsports - Corporate Logo
T#:20815192
Part#: BMS.SA.WMI.NOZ
Ships on Sep 29, 2026
Starting at $ 40.00 USD
Free Shipping on orders $49 and up
Add to Wish List
Starting at $ 40.00 USD
Free Shipping on orders $49 and up
Add to Wish List
With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! ​Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.
Show More Show Less

Select Vehicle

BMW Mini
Clear Vehicle

Purpose

Category

Brand

Price

$
$

Special Offers

Shipping