BMW Intake Parts for BMW 1 Series E82 (2008-2013)

BMS Replacement DCI Filters - Red

T#:38890884

Part#: BMS-N54-DCIR-R

Back Ordered

$ 79.00 USD

Add to Wish List

Qty

$ 79.00 USD

Add to Wish List

High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.

Show More Show Less

Burger Motorsport 4 BAR TMAP Sensor & Adapter - BMW N55/N54/S55 (2007...

T#:34885402

Part#: 4BAR TMAP

In Stock

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi.

E82 135i N54, E9X 335 N54, E60 535 Vargas Upgraded PCV Valve ...

2X Entries Into Our F80 M3 Sweepstakes

T#:389684

Part#: VTT-N54-PCV

In Stock

$ 68.99 USD

Add to Wish List

Qty

$ 68.99 USD

Add to Wish List

The crankcase oil vent system on the N52/N54 is one of its weakest and cheaply designed systems. We see crankcase vent issues on even stock engines but with more boost the problems are exponential. This Vargas upgraded PCV valve, and an oil catch can, are what the N54 engine needs and may alleviate most of your oil and boost leak issues. The PCV valve is supposed to let oil either return to the oil pan or pass through the intake manifold and get burned up in the combustion chamber. However, BMW used a weak plastic vent valve that doesn't seal well when under boost. Instead of closing and venting the oil out of the intake, it's forced through this valve and into the intake and coating your valves with oil residue and carbon. Most boost equals more oil forcing its way by. This upgraded N54 PCV valve uses higher grade materials, including aluminum, to provide a better seal and prevent oil from entering the intake. It's an easy install and a must-have item when considering any turbo work.

Show More Show Less

URO MAP Sensor - 13628644432

For vehicles with a production date from 03/2011

2X Entries Into Our F80 M3 Sweepstakes

T#:28271178

Part#: 13628644432

In Stock

$ 51.73 USD

Add to Wish List

Qty

$ 51.73 USD

Add to Wish List

The Manifold Absolute Pressure sensor provides pressure information to the engine control unit to calculate air density for determining the engine’s air mass flow rate. A faulty MAP sensor can upset the fuel mixture and ignition timing, causing a surge, rough idle, and a rich fuel condition which can lead to spark plug fouling and a loss of power and fuel economy.

Features:

Guaranteed fitment Replaces failed pressure sensor to restore proper airflow measurement Helps correct air/fuel mixture for optimal fuel economy Easy plug-and-play wiring connection

Show More Show Less

BMS Replacement DCI Filters - Blue

T#:38890886

Part#: BMS-N54-DCIR-B

In Stock

$ 89.00 USD

Add to Wish List

Qty

$ 89.00 USD

Add to Wish List

High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.

Show More Show Less

Burger Motorsports Upgraded Intake Coupler - N55 BMW

Not for sale or use in the state of California.

T#:556785

Part#: BMS-E-N55-INT-C

In Stock

$ 24.00 USD

Add to Wish List

Qty

$ 24.00 USD

Add to Wish List

When upgrading your intake, such as with the Burger Motorsports Performance Intake, your coupler is only good for stock vehicles. At boost pressure higher than stock, the stock accordion coupler is likely to collapse, suffocating your engine from air flow and potentially causing it to stall. With this 5 layer silicon upgraded coupler from Burger Motorsports, you can run your car as hard as possible even with upgraded turbos or port injection and will never have to worry about the coupler collapsing.

Show More Show Less

URO Fuel Tank Breather Valve - BMW E9X E82/88 E60 Z4 N54 3.0L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:39768334

Part#: 13907618652

In Stock

$ 100.99 USD

Add to Wish List

Qty

$ 100.99 USD

Add to Wish List

Allows fuel tank vapors to be vented, preventing excess pressure build-up.

URO Parts Crankcase Breather Hose - 11127584128

2X Entries Into Our F80 M3 Sweepstakes

T#:29002180

Part#: 11127584128

In Stock

$ 38.99 USD

Add to Wish List

Qty

$ 38.99 USD

Add to Wish List

This hose connects to the PCV on your vehicle's valve cover. Constructed of brittle plastic, this component is commonly broken. Replace this hose to resolve diagnostic trouble codes or lean/rich running conditions.

Features & Benefits:

Guaranteed fitment Replacement of failed OE hose instantly restores crankcase breather functionality for proper control of hydrocarbon emissions High-quality materials resist cracking and splitting due to engine heat and oil vapor 24-Month Unlimited Mileage Warranty URO Parts offers more than 8,000 high-quality spare parts, many of which are specifically designed to replace factory BMW components. Their business was founded on the premise of producing parts that adhere to the highest standards of precision, materials, and workmanship. Each part is closely evaluated by a team of industry professionals to determine how to offer the best blend of durability, function, and price. If you're looking for quality replacement components at a reasonable price, look no further than URO Parts.

Show More Show Less

Replacement N55 Performance Filter - Red

T#:38890883

Part#: BMSREPAFNFFR

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants

Show More Show Less

Boost Pressure (MAP) Sensor

2X Entries Into Our F80 M3 Sweepstakes

T#:35863153

Part#: 13629797773

In Stock

$ 63.24 USD

Add to Wish List

Qty

$ 63.24 USD

Add to Wish List

This sensor is used in the air intake system, to monitor boost for protection from over boost.

BMS High Flow Silicone Inlets - 2" Opening For Hybrid Turbos - BMW N5...

T#:14684349

Part#: N54HFSILINLETS

Ships on Sep 16, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

These high-quality BMS N54 silicone inlets replace your flimsy and restrictive plastic N54 BMW inlets reducing restriction and dramatically improving airflow, top-end boost, and performance. Includes all required hardware and is compatible with both factory-style diverter valves and blow-off valve kits. Available in 1.75" inlets for factory turbos or 2" inlets for hybrid and aftermarket turbos. Compatible with BMS DCI and all other N54 intake systems. FEATURES AND BENEFITS Huge 30-50whp top-end power gains Replaces your restrictive factory intake system Retains OEM engine bay look Durable high-temperature reinforced silicone for long life Compatible with both RHD and LHD vehicles Includes required hardware

Show More Show Less

BMS Replacement DCI Filters - White

T#:38890885

Part#: BMS-N54-DCIR-W

Ships on Sep 16, 2026

$ 84.00 USD

Add to Wish List

Qty

$ 84.00 USD

Add to Wish List

High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.

Show More Show Less

Vacuum Pump

2X Entries Into Our F80 M3 Sweepstakes

T#:15445601

Part#: 11667558344

In Stock

$ 155.99 USD

Add to Wish List

Qty

$ 155.99 USD

Add to Wish List

When the vacuum pump stops working it can cause a rough idle and loss of braking power. Replace your pump today to keep your vehicle running and stopping smoothly.

Turbo Charger Cooling Hose - Return

2X Entries Into Our F80 M3 Sweepstakes

T#:18468303

Part#: 11537558903

Ships in 1 Business Day

$ 58.75 USD

Add to Wish List

Qty

$ 58.75 USD

Add to Wish List

Burger Motorsports 2007-2012 TypeA 4BAR Adapter - E82/88 E9X E6X N54 ...

T#:599636

Part#: TYPEA4BARADAPTER

Ships in 2 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716

Show More Show Less

FTP Motorsport Dynamic Air Scoops - E82/88

T#:582200

Part#: SG71372

Special Order: No Guaranteed ETA

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

These scoops will increase the air volume that enters the engine thus providing a denser air charge. These pair excellently with an aftermarket intake system or a high-flow filter.

FTP High Flow Air Filter - N55 E8x/E9x

T#:5788169

Part#: GN55

Special Order: No Guaranteed ETA

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

FTP air filters are made with a durable rubber, with optimum adhesion characteristics to ensure fitment to all shapes of boxes. These air filters are also created without welded joints creating a one piece air filter, increasing durability. Features: Reduced emissions and increased MPG Direct fitment Extends engine life Increased power and airflow

Show More Show Less

FTP Motorsport Charge Pipe Replacement C Clip/O-ring - N54/N55 ...

T#:586830

Part#: SG71312FG-9

Special Order: No Guaranteed ETA

$ 24.95 USD

Add to Wish List

Qty

$ 24.95 USD

Add to Wish List

Replacement Intake pipe C-clip and o-ring.

Vacuum Hose

2X Entries Into Our F80 M3 Sweepstakes

T#:55749613

Part#: 11747797129

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

This ÜRO Parts bulk vacuum hose is the ideal choice for replacing degraded, heat-cycled factory lines that weaken engine response and disrupt crucial turbocharger or emissions operations.

Replacement Intake Coupler - Priced Each

Not for sale or use in the state of California.

T#:583384

Part#: INTAKECOUPLER

In Stock

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

BMS Replacement Intercooler For E Chassis BMW

07'-13' Model years

T#:38621402

Part#: BMS-INTCLR-N5455

Ships on Sep 16, 2026

$ 329.00 USD

Add to Wish List

Qty

$ 329.00 USD

Add to Wish List

The BMS N54/N55 Replacement E-Chassis Intercooler Upgrade for BMW improves cooling efficiency, boosts wheel horsepower, and maintains performance during extended driving sessions. With a larger core and expanded surface area compared to the stock intercooler, it reduces pressure drop and significantly enhances cooling capacity. Expect peak gains of around 10whp, with sustained increases of 20-30whp during long pulls or repeated runs versus the factory intercooler. This E-Chassis upgrade is ideal for setups up to 500whp, while the 7.5" RACE intercooler supports builds reaching 1000whp. Designed as a direct-fit replacement, the BMS intercooler is fully reversible and requires no additional hardware for installation. E-Chassis BMW FMIC Dimensions: 20" x 5.25" x 5.25".

Show More Show Less

URO Throttle Body Assembly - BMW E60 E61 E70 E82/88 E9X E83 N52 3.0L ...

2X Entries Into Our F80 M3 Sweepstakes

T#:43750221

Part#: 13547556118

In Stock

$ 177.99 USD

Add to Wish List

Qty

$ 177.99 USD

Add to Wish List

The sensors on your throttle body can wear out over time. These sensors control vital engine features through the engine computer. If your vehicle is throwing a check engine light about throttle position, this may be the issue. The only solution is to replace your throttle body.

Show More Show Less

BMW N54 BOV Vaccuum Adapter

T#:589530

Part#: N54BOVVACADPT

Ships on Sep 16, 2026

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

FTP Motorsport Charge Pipe Package - E-Chassis N55

T#:26404836

Part#: SG71312PK

Special Order: No Guaranteed ETA

$ 320.00 USD

Add to Wish List

Qty

$ 320.00 USD

Add to Wish List

FTP Motorsport Super Charge Pipe Package

T#:26404837

Part#: SG71414SPK

Special Order: No Guaranteed ETA

$ 250.00 USD

Add to Wish List

Qty

$ 250.00 USD

Add to Wish List

Intercooler Seal

2X Entries Into Our F80 M3 Sweepstakes

T#:15445586

Part#: 11617791470

Back Ordered

$ 9.69 USD

Add to Wish List

Qty

$ 9.69 USD

Add to Wish List

This is the seal found between the intercooler outlet and right intercooler charge pipe.

Mass Air Flow Sensor

2X Entries Into Our F80 M3 Sweepstakes

T#:56977967

Part#: 13627551638

Back Ordered

$ 73.99 USD

Add to Wish List

Qty

$ 73.99 USD

Add to Wish List

This aftermarket mass air flow sensor from URO Parts provides an economical replacement option to keep your chassis operating reliably without sacrificing measurement capabilities.

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Sep 16, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Sep 16, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Hobb's Switch

T#:403482

Part#: ACC-HOBBS

Ships on Sep 16, 2026

$ 55.00 USD

Add to Wish List

Qty

$ 55.00 USD

Add to Wish List

Water/Methanol Injection Hose - 20'

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

T#:21176934

Part#: BMS-WMI-SOL

Ships on Sep 16, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

WMI Inline Filter

T#:21176933

Part#: BMS-WMI-FIL

Ships on Sep 16, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

Super Atomizing Water/Methanol Injection Nozzles

T#:20815192

Part#: BMS.SA.WMI.NOZ

Ships on Sep 29, 2026

Starting at $ 40.00 USD

Add to Wish List

Starting at $ 40.00 USD

Add to Wish List

With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW 1 Series E82 (2008-2013)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results