BMW Intake Parts for BMW 1 Series E82 (2008-2013)

Turner Motorsport N52 Silicone Intake Boot - Black - E8x 128i, E9x 32...

10X Entries Into Our F80 M3 Sweepstakes

T#:400812

Part#: 006655TMS01

In Stock

Sale - Save 41% $ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 71.99 USD

Add to Wish List

Qty

Sale - Save 41%

$ 122.99

This product was last offered at the strikethrough price on
05-03-2026

$ 71.99 USD

Add to Wish List

The intake boot is a regular issue especially for BMW's, nearly all vehicles have a boot manufactured from rubber with an accordion section in the design for flexibility. This flexible section is typically where the failure comes from, leading to vacuum leak engine codes, rough idle, and increase fuel consumption.

When you upgrade to a Turner silicone intake boot you get a perfect fit that will not only outlast the OE design (meaning any vacuum leaks and rough idle), while also smoothing out airflow within the intake tract. This boot also eliminates the factory intake resonator giving your engine a much more aggressive sound under the hood especially at higher rpm. Available in black or Turner blue color, our intake boot offers either a pop of color or a cohesive, complementary look in your engine bay.

The Turner Motorsport silicone intake boot is manufactured with 5 layers of wire reinforced silicone to prevent collapse under load. Engineered in-house utilizing 3D scanning technology, this boot offers perfect fitment with the factory air box and either single stage or three stage (high output N52) intake manifolds.

Install as a standalone reliability improvement or in addition to our three stage intake manifold and Turner performance tune (available here).

Replaces OE intake boot 13717536004.

Features:

5 layers of wire reinforced silicone
Perfect fitment with factory airbox
Compatible with single stage or three stage manifold
Installation hardware included

This item fits the following BMWs:
2008-2013 E82 E88 BMW 128i Coupe Convertible
2006-2011 E90 BMW 325i 325xi 328i 328xi 330i 330xi - Sedan
2007-2011 E91 BMW 325i 325xi 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi - Coupe
2007-2013 E93 BMW 328i - Convertible

Show More Show Less

135i Hot Side Intake Duct

10X Entries Into Our F80 M3 Sweepstakes

T#:26971816

Part#: 025947TMS06KT

In Stock

Sale - Save 15% $ 218.99

This product was last offered at the strikethrough price on
06-14-2026

$ 186.14 USD

Add to Wish List

Qty

Sale - Save 15%

$ 218.99

This product was last offered at the strikethrough price on
06-14-2026

$ 186.14 USD

Add to Wish List

BMS Replacement DCI Filters - Red

T#:38890884

Part#: BMS-N54-DCIR-R

Back Ordered

$ 79.00 USD

Add to Wish List

Qty

$ 79.00 USD

Add to Wish List

High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.

Show More Show Less

Burger Motorsport 4 BAR TMAP Sensor & Adapter - BMW N55/N54/S55 (2007...

T#:34885402

Part#: 4BAR TMAP

Back Ordered

$ 139.99 USD

Add to Wish List

Qty

$ 139.99 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi.

Black Market Parts Extended Intake Manifold Studs - N54/N55/S55 ...

T#:5229478

Part#: 501-0018

In Stock

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The Black Market Parts Extended Intake Manifold Studs are the same great product that come with our N54/N55/S55 Port Injection Kit. These studs are compatible with any port injection kit and can even be used with stock manifolds. Each stud is designed like factory and is removed/installed with the same e-torx socket the factory 7mm studs are removed with so no switching tools or specialty stud installers needed.

Show More Show Less

Precision Raceworks 2.5" Replacement Cone Air Filters - Pair of Filte...

T#:38229120

Part#: 622-0136

In Stock

$ 64.99 USD

Add to Wish List

Qty

$ 64.99 USD

Add to Wish List

The Precision Raceworks Replacement Air Filters are a perfect choice when looking to replace your dirty or damaged PR inlet filters.

BMS Replacement DCI Filters - Blue

T#:38890886

Part#: BMS-N54-DCIR-B

In Stock

$ 89.00 USD

Add to Wish List

Qty

$ 89.00 USD

Add to Wish List

High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.

Show More Show Less

Burger Motorsports Upgraded Intake Coupler - N55 BMW

Not for sale or use in the state of California.

T#:556785

Part#: BMS-E-N55-INT-C

In Stock

$ 24.00 USD

Add to Wish List

Qty

$ 24.00 USD

Add to Wish List

When upgrading your intake, such as with the Burger Motorsports Performance Intake, your coupler is only good for stock vehicles. At boost pressure higher than stock, the stock accordion coupler is likely to collapse, suffocating your engine from air flow and potentially causing it to stall. With this 5 layer silicon upgraded coupler from Burger Motorsports, you can run your car as hard as possible even with upgraded turbos or port injection and will never have to worry about the coupler collapsing.

Show More Show Less

Replacement N55 Performance Filter - Red

T#:38890883

Part#: BMSREPAFNFFR

In Stock

$ 70.00 USD

Add to Wish List

Qty

$ 70.00 USD

Add to Wish List

Enhance your BMW's performance with the Replacement N55 Performance Filter from Burger Motorsport. Specifically designed for N55 engines, this filter optimizes airflow, leading to increased horsepower and torque. Enjoy improved throttle response and fuel efficiency, all while protecting your engine from harmful contaminants. Key Features: Designed for N55 engines Optimizes airflow for increased power Improves throttle response and fuel efficiency Protects engine from contaminants

Show More Show Less

BMW E8X E9X Turbo Inlet Flange Adapter Kit 1.75" To 2"

T#:21637194

Part#: 501-0026

In Stock

$ 49.99 USD

Add to Wish List

Qty

$ 49.99 USD

Add to Wish List

BMW E8X E9X Turbo Inlet Flange Adapter Kit 1.75" To 2" by Turner Motorsport is designed to facilitate a seamless upgrade for your turbo system. This precision adapter kit allows BMW E9X and E8X owners to run 2" relocated inlets on stock turbos with confidence, ensuring a secure fit without the risk of the inlets slipping off.

Secure Fit: Prevents inlets from slipping off the turbo flange, ensuring a tight and reliable connection.
Precision Engineering: Made from high-quality materials for a perfect fit and enhanced performance.
Easy Upgrade: Allows for easy transition from 1.75" to 2" turbo inlets, providing improved airflow and performance.
Durable Construction: Built to withstand high pressures and temperatures, ensuring long-term reliability.
Compatible Design: Specifically designed for BMW E8X and E9X models, making it a perfect fit for your vehicle.

Show More Show Less

Precision Raceworks Relocated Inlet Kit - Upgraded Turbos (2") - BMW ...

T#:38229118

Part#: 601-0027

Ships on Sep 17, 2026

$ 339.99 USD

Add to Wish List

Qty

$ 339.99 USD

Add to Wish List

The Precision Raceworks N54 Relocated Inlet Kit is the highest flowing and highest quality inlet system available for the N54 on the market! Since our development, many others have followed making silicone inlet systems. Don’t be fooled into thinking all kits are the same, our design features wire inlayed high temp silicone to prevent melting or collapsing due to heat and vacuum of the turbo. Best of all our kit does not require you to butcher your factory harness to relocate the coolant expansion tank. Our kit includes a plug-and-play extension harness featuring OEM weatherproof connectors for easy installation. *NOT COMPATIBLE WITH RHD VEHICLES

Show More Show Less

Burger Motorsports 2007-2012 TypeA 4BAR Adapter - E82/88 E9X E6X N54 ...

T#:599636

Part#: TYPEA4BARADAPTER

Ships in 3 Business Days

$ 35.00 USD

Add to Wish List

Qty

$ 35.00 USD

Add to Wish List

Use these plug and play adapters to quickly adapt a 4bar TMAP sensor to your N54/N55/S55 BMW, raising the boost maximum boost range from 20psi factory up to 43psi. For very high boost applications, this 4 BAR adapter can be used which requires Bosch 4 BAR sensor (Part # 281002576). SENSOR NOT INCLUDED, Please see T#587716

Show More Show Less

BMS High Flow Silicone Inlets - 2" Opening For Hybrid Turbos - BMW N5...

T#:14684349

Part#: N54HFSILINLETS

Ships on Sep 18, 2026

$ 229.00 USD

Add to Wish List

Qty

$ 229.00 USD

Add to Wish List

These high-quality BMS N54 silicone inlets replace your flimsy and restrictive plastic N54 BMW inlets reducing restriction and dramatically improving airflow, top-end boost, and performance. Includes all required hardware and is compatible with both factory-style diverter valves and blow-off valve kits. Available in 1.75" inlets for factory turbos or 2" inlets for hybrid and aftermarket turbos. Compatible with BMS DCI and all other N54 intake systems. FEATURES AND BENEFITS Huge 30-50whp top-end power gains Replaces your restrictive factory intake system Retains OEM engine bay look Durable high-temperature reinforced silicone for long life Compatible with both RHD and LHD vehicles Includes required hardware

Show More Show Less

BMS Replacement DCI Filters - White

T#:38890885

Part#: BMS-N54-DCIR-W

Ships on Sep 18, 2026

$ 84.00 USD

Add to Wish List

Qty

$ 84.00 USD

Add to Wish List

High-performance replacement filters for the N54 BMW Dual Cone Intake (DCI), featuring an integrated velocity stack for optimal airflow. Pre-oiled with red filter oil and includes new clamps for hassle-free installation.

Show More Show Less

Turner Charge Pipe Intercooler C Clip - BMW M57 N54 N55

10X Entries Into Our F80 M3 Sweepstakes

T#:638414

Part#: 006617LA01-01

In Stock

Sale - Save 89% $ 34.99

This product was last offered at the strikethrough price on
05-03-2026

$ 3.90 USD

Add to Wish List

Qty

Sale - Save 89%

$ 34.99

This product was last offered at the strikethrough price on
05-03-2026

$ 3.90 USD

Add to Wish List

This clip secures the intercooler charge piping to both the inlet and outlet of the intercooler. (not for use with the throttle body connection) Priced each and appropriate for both sides.

Replacement Intake Coupler - Priced Each

Not for sale or use in the state of California.

T#:583384

Part#: INTAKECOUPLER

In Stock

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

Precision Raceworks OE-Spec Intake Manifold O-Rings - 6 Pack - BMW N5...

T#:38229122

Part#: 501-0001

In Stock

$ 12.99 USD

Add to Wish List

Qty

$ 12.99 USD

Add to Wish List

The Black Market Parts OE-Spec Intake Manifold O-Rings kit is made with Viton capable of withstanding all fuels (including e85) as well as oils. These o-rings are made to OE specifications and are a direct replacement for the seals found in your factory intake manifold. These o-rings are also used in other BMP products such as our N54/N55 Port Injection Kit, S55 Port Injection kit, N54 Performance Intake Manifold, and N55 Performance Intake Manifold.

Show More Show Less

BMS Replacement Intercooler For E Chassis BMW

07'-13' Model years

T#:38621402

Part#: BMS-INTCLR-N5455

Ships on Sep 18, 2026

$ 329.00 USD

Add to Wish List

Qty

$ 329.00 USD

Add to Wish List

The BMS N54/N55 Replacement E-Chassis Intercooler Upgrade for BMW improves cooling efficiency, boosts wheel horsepower, and maintains performance during extended driving sessions. With a larger core and expanded surface area compared to the stock intercooler, it reduces pressure drop and significantly enhances cooling capacity. Expect peak gains of around 10whp, with sustained increases of 20-30whp during long pulls or repeated runs versus the factory intercooler. This E-Chassis upgrade is ideal for setups up to 500whp, while the 7.5" RACE intercooler supports builds reaching 1000whp. Designed as a direct-fit replacement, the BMS intercooler is fully reversible and requires no additional hardware for installation. E-Chassis BMW FMIC Dimensions: 20" x 5.25" x 5.25".

Show More Show Less

BMW N54 BOV Vaccuum Adapter

T#:589530

Part#: N54BOVVACADPT

Ships on Sep 18, 2026

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

Precision Raceworks Relocated Inlet Kit - Stock Turbos (1.75") - BMW ...

T#:38229117

Part#: 622-0131

Ships in 7 Business Days

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

The Precision Raceworks N54 Relocated Inlet Kit is the highest flowing and highest quality inlet system available for the N54 on the market! Since our development, many others have followed making silicone inlet systems. Don’t be fooled into thinking all kits are the same, our design features wire inlayed high temp silicone to prevent melting or collapsing due to heat and vacuum of the turbo. Best of all our kit does not require you to butcher your factory harness to relocate the coolant expansion tank. Our kit includes a plug-and-play extension harness featuring OEM weatherproof connectors for easy installation. *NOT COMPATIBLE WITH RHD VEHICLES

Show More Show Less

Precision Raceworks T-Map Extension Harness - BMW E9x/E8x N54 3.0L ...

T#:47679241

Part#: 201-0133

Ships in 9 Business Days

$ 34.99 USD

Add to Wish List

Qty

$ 34.99 USD

Add to Wish List

The Precision Raceworks BMW E9x/E8x T-Map Extension Harness is an excellent way to extend the length of your existing harness for the charge pipe T-Map sensor without having to cut and splice any wires. Additionally, this harness adapts your OEM map sensor wire to a 3.5 bar map sensor connector. An absolute must for Forward Facing Manifolds and Charge Pipes from Precision Raceworks or any other company offering a pipe that relocates the map sensor, resulting in the need to extend the harness.

Show More Show Less

Precision Raceworks 2.5" Replacement Cone Air Filter - Single Filter ...

T#:38229119

Part#: 201-0092

Ships in 10 Business Days

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

The Precision Raceworks Replacement Air Filters are a perfect choice when looking to replace your dirty or damaged PR inlet filters.

BMS Billet Water/Methanol Injection Tank Cap With Safety Check Valve ...

T#:20815185

Part#: BMSWMITC

In Stock

$ 59.00 USD

Add to Wish List

Qty

$ 59.00 USD

Add to Wish List

The Burger Motorsports custom billet Water/Methanol Injection (WMI) cap includes an integrated heavy-duty check valve to let much-needed air in and prevent dangerous WMI vapor/fumes and liquid from getting out! Each cap is CNC machined in the USA from a solid block of billet aluminum, engraved with the BMS logo, and anodized blue for protection. Check valve piston must be lightly lubricated if tank shows signs of vacuum. One drop of penetrating oil or motor oil in the top will keep the check valve operational. Features and Benefits Integrated heavy-duty check valve lets air in but not out Specifically designed to prevent evaporation Keeps vapors inside the tank Made from a solid block of billet aluminum Blue anodizing for corrosion protection Exaggerated grips for easy removal Integrated heavy-duty o-ring Made in the USA

Show More Show Less

1 Gallon Methanol Tank - Clear/White

T#:558165

Part#: 1G-MT-CL

In Stock

$ 30.00 USD

Add to Wish List

Qty

$ 30.00 USD

Add to Wish List

The least expensive option available from BMS, this 1 gallon tank is compact and flexible allowing for a wide range of mounting on any flat vertical surface in the trunk. The tank is clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a compression pump feed fitting Made in USA Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

BMS DDP5800 Water/Methanol Injection Pump

T#:20815186

Part#: BMSDDP5800

Ships in 1 Business Day

Starting at $ 120.00 USD

Add to Wish List

Starting at $ 120.00 USD

Add to Wish List

The Burger Motorsports DDP 5800 water methanol alcohol Injection pump is a heavy-duty pump used in all of our BMS Water Injection kits. 200 psi bypass for smooth and high pressure and 1.3 GPM open flow. Made in the USA. Available with built-in quick connect fittings for 1/4" WMI line or with open 3/8" NPT threads if you plan to use braided lines.

Show More Show Less

2 Gallon Low Profile Universal Methanol Tank

T#:20946755

Part#: 2G-ULPMT

In Stock

Starting at $ 179.00 USD

Add to Wish List

Starting at $ 179.00 USD

Add to Wish List

Integrated pump mount for a super clean install. This tank allows the pump (sold separately) to mount to the bottom of the tank making for a clean and fast installation. It’s universal and will fit a wide variety of trunk applications. The larger capacity means more time between fill ups. Offered in black for a stealth appearance and in clear to allow visually checking the fluid level. Includes a 2-way vented black plastic cap and a compression pump feed fitting. Compatible with BMS DDP5800 pumps, ES4714512 or ES4714513 Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Pump mounts directly to the tank Compatible with all DDP 5800 pumps Super low profile design Available in clear for visually checking fluid levels Available in black for a stealth appearance Includes 2-way vented black plastic cap 4 mounting holes in the feet of the tank Includes a compression pump feed fitting, 2 90 degree push fittings, 9" of methanol line and pump mounting hardware. Made in the USA Tank dimensions: L 15.5" x W 8" x H 8.25"

Show More Show Less

1.25 Gallon Heavy-Duty Universal Methanol Tank

T#:20946761

Part#: 1.25G-UMT-CL

Ships on Sep 18, 2026

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This tank is thicker and stronger than BMS' basic 1-gallon WMI tank. This tank features an easy fill filler nozzle, an anti-starvation reservoir with a pre-threaded bung for the included 90º compression pump feed fitting, a spill-catcher reservoir around the filler cap, a 2-way vented black plastic cap, and is translucent to allow visually checking the fluid level. Optional upgraded blue billet water/methanol injection (WMI) cap with 1-way check valve, ES4714530 Features & Benefits 1.25 Gallon Tank (4.73 Liters) Anti-Starvation Reservoir Easy Fill filler Nozzle Spill-Catcher Reservoir around the filler cap Available in clear for visually checking fluid levels 8 mounting holes on the side rails Includes 2-way vented black plastic cap Includes a 90º compression pump feed fitting Tank dimensions: L 11" x W 4.5 x H 9"

Show More Show Less

Burger Motorsport JB4-Compatible Water/Methanol Injection System - N2...

T#:558163

Part#: BMS-WMI

Ships on Sep 17, 2026

Starting at $ 226.99 USD

Add to Wish List

Starting at $ 226.99 USD

Add to Wish List

Looking to make loads of power on pump gas? Enter: water/methanol injection. Regardless if you're tuned for conventional pump gas, E85, or race fuel, use of a properly configured and integrated water/meth system will reduce temperatures, allowing you to make more power than on just conventional fuel alone. Select your engine-specific nozzles (which are standard 1/8" NPT and install in most aftermarket chargepipes), your tank to mount in the trunk, upgraded steel braided lines if you so choose, and some boost juice and you just need a management solution! Optionally, add a BMS FSB for JB4 integration!

Show More Show Less

Water/Methanol Injection Hose - 20'

T#:21176944

Part#: BMS-WMI-IL

In Stock

$ 31.99 USD

Add to Wish List

Qty

$ 31.99 USD

Add to Wish List

BMS Water/Methanol Injection (WMI) Solenoid W/ Filter

T#:21176934

Part#: BMS-WMI-SOL

Ships on Sep 18, 2026

$ 75.00 USD

Add to Wish List

Qty

$ 75.00 USD

Add to Wish List

This solenoid safely stops fluid from flowing into your intake system when WMI is not in use. The solenoid features two 1/8 NPT ports with included compression 1/4 in. hose fittings for a quick leak-free connection. The included filter keeps dirt and debris out of your engine.

Show More Show Less

WMI Inline Filter

T#:21176933

Part#: BMS-WMI-FIL

Ships on Sep 18, 2026

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

This heavy duty methanol/water injection filter is specifically designed for a methanol/water system can filter particles down to 40 microns in size. It safeguards the functional components of the water/methanol system as well as your engine from particulates present in the water/methanol mixture.

Show More Show Less

Super Atomizing Water/Methanol Injection Nozzles

T#:20815192

Part#: BMS.SA.WMI.NOZ

Ships on Sep 30, 2026

Starting at $ 40.00 USD

Add to Wish List

Starting at $ 40.00 USD

Add to Wish List

With CNC machined serviceable/cleanable nozzle inserts for precise fluid metering. Choose single or dual nozzles and match the flow rate to your power needs! Water/Methanol Injection (WMI) nozzles are determined by the intended power and how many bungs your charge pipe has. These nozzles are 1/8” NPT and screw in to bungs included on most aftermarket charge pipes. BMS "super atomizing" nozzles are designed and manufactured by BMS and are known for their great atomization and flow characteristics. The number on the methanol injection nozzle represents the approximate gallons per hour of fluid when at full flow. Generally speaking running two smaller nozzles is preferred to one larger nozzle for an equal flow to improve fluid atomization and distribution.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Intake Parts for BMW 1 Series E82 (2008-2013)

Sub-Categories

Select Vehicle

Category

Brand

Price

Special Offers

Shipping

Narrow Results