BMW Intake Parts for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Please ensure your correct model is selected

One thing drivers and cars have in common is the need for air. Induction systems provide a third of the critical necessities for engines to run, so giving your BMW the best way to breathe is paramount in engine performance. If you need to replace your filter, recharge your reusable pod filter, or upgrade your intake, turbos, or intercooler parts, everything can be found below. We have OEM replacements as well as aftermarket performance upgrades to keep your BMW pristine, powerful, and functioning at peak efficiency.

Sub-Categories

Sort By:

VRSF OEM Replacement Charge Pipe C-Clip
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:585048
Part#: 504020
In Stock
$ 24.99 USD
Free Shipping on orders $49 and up
Replacement C-Clip for OEM & Aftermarket Charge Pipes
VRSF Upper Chargepipe Upgrade Kit - N55
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:584877
Part#: 10901020A
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
Reduce turbo lag and increase throttle response with a billet aluminum charge pipe from VRSF. The VRSF charge pipe maintains the OEM C-clip to provide a better seal over a conventional clamp/coupler design. Featuring CNC billet aluminum and a sharp black powder coated finish. This piece also includes two plugged methanol bungs for those who use or plan to use methanol/water injection.
Show More Show Less
VRSF - Corporate Logo
T#:585062
Part#: 10903070
In Stock
$ 379.99 USD
Free Shipping
$ 379.99 USD
Free Shipping
Get the most out of your N54 or N55 engine by replacing the factory intercooler with this Race intercooler kit from VRSF. This race intercooler will allow for more horsepower gains by reducing intake temperatures and preventing heat soak. With this intercooler you can expect a 2-3 degree temperature rise during a 3rd gear pull, compared to a 32 degree rise on a OEM intercooler.
Show More Show Less

VRSF Competition HD Intercooler Upgrade - 7.5" - N54/N55
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:585058
Part#: 10903040
In Stock
19% off MSRP $ 529.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 429.99 USD
Free Shipping
19% off MSRP
$ 529.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 429.99 USD
Free Shipping
Get the most out of your N54 or N55 engine by replacing the factory intercooler with this 7.5" Race intercooler kit from VRSF. This race intercooler will allow for more horsepower gains by reducing intake temperatures and preventing heat soak.
Show More Show Less

VRSF 2" OEM Location High Flow Silicone Inlet Kit - N54
We Price Match - Give Us A Call or Chat! 2" Inlets
VRSF - Corporate Logo
T#:585222
Part#: 10901052
Ships in 1 Business Day
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Improve your restrictive OEM intake with this 2" Relocated Silicone High Flow Inlet Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF OEM location inlet upgrade kit provides a more direct, high flowing intake path for your turbos. This kit includes everything you need to replace the OEM inlets, including relocation brackets, filters, hoses, and the steel wire reinforced silicon tubing.
Show More Show Less
VRSF Chargepipe Upgrade Kit - N54
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:584880
Part#: 10901020D
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
Reduce turbo lag and increase throttle response with a billet aluminum charge pipe from VRSF. The VRSF charge pipe maintains the OEM C-clip to provide a better seal over a conventional clamp/coupler design. Featuring CNC billet aluminum and a sharp black powder coated finish.
Show More Show Less

VRSF High Flow Aluminum Intake Inlet Kit - E8X/E9X N55
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:585195
Part#: 10901055
In Stock
$ 189.99 USD
Free Shipping
$ 189.99 USD
Free Shipping
This inlet will dramatically increase flow, especially when in mid to upper RPM range, as well as a more aggressive exhaust note.The VRSF inlet solution is unique in that it features a CNC'd aluminum flange that offers a larger overall inside diameter, increasing flow and decreases back pressure. This product is compatible with any OEM or after market intake and any upgraded turbo that is compatible with the OEM intake.
Show More Show Less
Dinan High Flow Drop-in Replacement Air Filter - BMW E82/88 E9X N52 3...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Call In, Chat, Or Email, For Best Price! Limited Time Only!
Dinan - Corporate Logo
T#:18236085
Part#: D401-0036
In Stock
11% off MSRP $ 70.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD
Free Shipping
11% off MSRP
$ 70.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 62.99 USD
Free Shipping

BMW N51 N52 3.0L Dinan High Flow Drop-in Replacement Air Filter is designed to enhance engine performance while reducing maintenance costs. Turner Motorsport provides this high-flow, washable air filter that improves air intake efficiency, allowing your engine to breathe better and generate more power without additional strain. This filter is an excellent choice for those who want performance gains without committing to a full intake system upgrade.

  • Enhanced Airflow: Increases engine performance by allowing more air to enter the engine, resulting in improved power output.
  • Washable and Reusable: Reduces long-term maintenance costs by providing a durable filter that can be cleaned and reused.
  • Easy Installation: Drop-in replacement design makes it simple to install without modifications.
  • Improved Efficiency: Helps the engine work more efficiently, potentially leading to better fuel economy.

This Dinan air filter is a cost-effective solution for boosting your BMW's performance while maintaining reliability.

Show More Show Less

VRSF Chargepipe Upgrade Kit - N54
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:584879
Part#: 10901020C
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
Reduce turbo lag and increase throttle response with a billet aluminum charge pipe from VRSF. The VRSF charge pipe maintains the OEM C-clip to provide a better seal over a conventional clamp/coupler design. Featuring CNC billet aluminum and a sharp black powder coated finish. This piece also includes two plugged methanol bungs for those who use or plan to use methanol/water injection.
Show More Show Less

VRSF 1.75" OEM Location High Flow Silicone Inlet Kit - N54
We Price Match - Give Us A Call or Chat! 1.75" Inlets
VRSF - Corporate Logo
T#:585220
Part#: 10901050
In Stock
$ 229.99 USD
Free Shipping
$ 229.99 USD
Free Shipping
Improve your restrictive OEM intake with this 1.75" Relocated Silicone High Flow Inlet Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF OEM location inlet upgrade kit provides a more direct, high flowing intake path for your turbos. This kit includes everything you need to replace the OEM inlets, including relocation brackets, filters, hoses, and the steel wire reinforced silicon tubing.
Show More Show Less
VRSF - Corporate Logo
T#:593732
Part#: 10901020E
Ships in 3 Business Days
$ 179.99 USD
Free Shipping
$ 179.99 USD
Free Shipping
This aluminum charge pipe by VRSF features a billet aluminum turbo connection and comes finished in a brushed aluminum. Replacing your plastic OEM inlet with this heavy duty, mandrel bent aluminum pipe offers a larger diameter pipe, increasing flow. Increase throttle response and decreases turbo lag. Brushed aluminum finish Billet CNC flanges for a leak free connection. Includes everything necessary to upgrade from factory charge pipe. Lifetime warranty. Does not include o-rings
Show More Show Less
VRSF Performance Intake Air Filter Kit - N54
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:585223
Part#: 10901010
In Stock
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
Replace the restrictive factory filter system with the VRSF performance intake/air filter kit. The inverted S&B intake filters greatly increase flow in the mid to upper RPM range while introducing a more aggressive engine note. Gains of up to 20whp can be realized by replacing the restrictive factory intake with this bolt on kit. Everything needed for installation is included in this kit.
Show More Show Less


VRSF - Corporate Logo
T#:35154904
Part#: 205470
In Stock
$ 27.99 USD
Free Shipping on orders $49 and up

VRSF Outlet Charge Pipe Coupler for 10901030, 10901035, 10901040 & 10901045 is designed to ensure a secure, leak-free connection for turbocharged BMW engines. This premium coupler is crafted to fit seamlessly with VRSF outlet charge pipes, enhancing the reliability and performance of your BMW's turbo system. Made from high-quality materials, it withstands extreme boost pressures and temperatures, making it ideal for stock and high-performance applications. Available through Turner Motorsport, this coupler is a perfect upgrade for BMW enthusiasts seeking durability and optimal engine efficiency.

Benefits:

  • Provides a reliable, leak-free seal for VRSF charge pipes and turbo outlets
  • Engineered for compatibility with 10901030, 10901035, 10901040 & 10901045 charge pipes
  • Built with durable, heat-resistant materials to handle high boost pressures
  • Enhances turbo efficiency by eliminating boost leaks and ensuring consistent airflow
  • Precision-fit design allows for straightforward installation and optimal performance
  • Ideal for both stock and modified BMW turbocharged systems

The VRSF Outlet Charge Pipe Coupler for 10901030, 10901035, 10901040 & 10901045 is a must-have component for BMW owners aiming to maintain reliability and boost performance in their vehicle's turbocharging system.

Show More Show Less
VRSF - Corporate Logo
T#:585030
Part#: 10901062
In Stock
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping
Replace your restrictive OEM intake with this 2" Relocated Silicone High Flow Inlet Intake Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF passenger side inlet upgrade kit relocates your coolant reservoir to the driver side while providing a more direct, high flowing intake path for your turbos.
Show More Show Less
VRSF Chargepipe Upgrade Kit - N54
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:584878
Part#: 10901020B
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
Reduce turbo lag and increase throttle response with a billet aluminum charge pipe from VRSF. The VRSF charge pipe maintains the OEM C-clip to provide a better seal over a conventional clamp/coupler design. Featuring CNC billet aluminum and a sharp black powder coated finish. This piece also includes two plugged methanol bungs for those who use or plan to use methanol/water injection.
Show More Show Less

VRSF Lower Charge Pipe Upgrade - E8X/E9X N45 N55
We Price Match - Give Us A Call or Chat! Designed to work with VRSF intercooler
VRSF - Corporate Logo
T#:585210
Part#: 305450
In Stock
$ 72.99 USD
Free Shipping
$ 72.99 USD
Free Shipping
The OEM plastic lower charge pipe is very restrictive and prone to failure under stock boost levels. VRSF solves this issue with a 2.5" mandrel bent aluminum replacement that increases flow, and is much more reliable. This upgrade will improve the turbo spool of your N54 or N55 engine, and enables you to safely tune for more boost.
Show More Show Less

Intake Manifold Upgrade Kit
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:15710827
Part#: 11617559523-KT
In Stock
Sale - Save 25% $ 902.99

This product was last offered at the strikethrough price on
05-03-2026

$ 677.38 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 902.99

This product was last offered at the strikethrough price on
05-03-2026

$ 677.38 USD
Free Shipping on orders $49 and up
The E90 330i had the highest horsepower out of the N52-powered vehicles. The reason for this was while the 128i, 325i, 328i, 525i, and 528i received a single-stage manifold, the 330i was gifted a 3-stage manifold. A 3-stage manifold consisted of 2 DISA valves that would divert air to the cylinders that needed it. With more air going to the appropriate cylinders and fuel adjustments by the ECU, this valve system helps extract the most power from the N52. Luckily this amazing manifold bolts on to any version of the N52 and, after a flash of the ECU, can give you up to 42hp! *Flash Software not currently available from ECS Tuning* Kit includes: 330i intake manifold Both DISA valves Gaskets Mounting hardware Crankcase vent hose
Show More Show Less
VRSF Stainless T-Bolt Clamp Kit For VRSF Intercoolers
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:27138532
Part#: 305416
Back Ordered
$ 24.99 USD
Free Shipping on orders $49 and up

2" Aluminum Turbo Outlet Boost Pipe - V-Band
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:584929
Part#: 10901045
Back Ordered
$ 179.99 USD
Free Shipping
$ 179.99 USD
Free Shipping
N54 Boost Pipe upgrade kit with V-band Turbo Outlet Style - Also referred to as a "Hot Side Charge Pipe"
VRSF Intercooler Install Kit - N54/N55
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:585071
Part#: 305410
In Stock
$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
This kit includes the couplers, clamps, and mounting hardware neccesary to install any N54/N55 E-chassis VRSF intercooler.

BMW E8X E9X DO88 47mm Turbo Inlet Hose
47mm diameter for OE size turbocharger only.
DO88 - Corporate Logo
T#:13924834
Part#: DO88KIT213S47
Ships in 10 Business Days
$ 325.99 USD
Free Shipping on orders $49 and up

BMW E8X E9X DO88 47mm Turbo Inlet Hose is engineered to significantly enhance engine performance by improving airflow. Turner Motorsport offers this high-quality inlet hose to optimize turbo efficiency and overall power.

  • Increased Airflow: Boasts 59% more airflow compared to standard hoses, allowing your engine to breathe more effectively.
  • Reduced Backpressure: Designed to lower backpressure, enabling the turbo to intake more air for improved power and performance.
  • Enhanced Performance: Supports higher power output and better throttle response, contributing to a more dynamic driving experience.
  • High-Quality Construction: Made from durable materials to ensure long-lasting performance and reliability under high-stress conditions.
Show More Show Less

DO88 Turbo Inlet Hose - E9X/E8X 135i/335i/35i 59mm
59mm diameter for vehicles with an upgraded/larger turbocharger only.
DO88 - Corporate Logo
T#:13924831
Part#: DO88KIT213S59
Ships on Sep 24, 2026
$ 325.99 USD
Free Shipping on orders $49 and up
Boasting 59% more airflow, this inlet pipe will let your engine breathe better than ever before! Designed to reduce backpressure, this lets the turbo take in more air giving you more power and better performance!
Show More Show Less
Dinan High Flow Drop-in Replacement Air Filter - E8X/E6X/E89/E9X - N5...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:18236084
Part#: D401-0035
Ships on Sep 30, 2026
51% off MSRP $ 70.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD
Free Shipping
51% off MSRP
$ 70.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD
Free Shipping
Reduce your maintenance costs and increase your performance with Dinan's high-flow, washable, drop-in air filter! Using better breathing materials lets your engine make more power while not working as hard, giving you a reliable bump in engine performance! The air filters are a great alternative if a full intake system just is not possible at the moment, but no worries, Dinan has you covered!
Show More Show Less
Mishimoto - Corporate Logo
T#:51075070
Part#: MMBCC-N54-06CBE2
In Stock
New Item
$ 253.99 USD
Free Shipping on orders $49 and up
The Mishimoto N54 Catch Can offers a robust solution for managing crankcase pressure and oil blow-by.


VRSF - Corporate Logo
T#:585082
Part#: 10903050
In Stock
$ 579.99 USD
Free Shipping
$ 579.99 USD
Free Shipping
Get the most out of your N54 or N55 engine by replacing the factory intercooler with this 7.5" Race intercooler kit from VRSF. This race intercooler will allow for more horsepower gains by reducing intake temperatures and preventing heat soak.
Show More Show Less
Mishimoto - Corporate Logo
T#:597112
Part#: MMHOSE-E9006IHRD
In Stock at Vendor
$ 87.99 USD
Free Shipping
$ 87.99 USD
Free Shipping
The Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single-stage or 3-stage intake manifolds. The silicone construction will provide you with long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free! WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less
Mishimoto - Corporate Logo
T#:597111
Part#: MMHOSE-E9006IHBK
In Stock at Vendor
$ 87.99 USD
Free Shipping
$ 87.99 USD
Free Shipping
The Mishimoto N52 silicone intake boot is constructed of five layers of silicone with steel reinforcement rings for maximum durability. The steel reinforcement rings keep this hose from collapsing when under load, keeping your engine supplied with adequate airflow. The stock N52 intake boot has a resonator that BMW included to keep the N52 quiet. We tossed that resonator to the curb for a nice increase in engine and intake tone. This N52 intake boot fits with the stock airbox and single-stage or 3-stage intake manifolds. The silicone construction will provide you with long service life, and the Mishimoto Lifetime Warranty will make sure your intake boot is always leak free! WARNING! Prop 65 may apply to this product. Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1968) is a California law that applies to call companies selling products in California. Prop 65 requires any listed chemical present above very low levels that are known to cause cancer, birth defects, or other reproductive harm. For more information about California Prop 65 warning see: www.P65Warnings.ca.gov.
Show More Show Less

VRSF - Corporate Logo
T#:585194
Part#: 10901060
Ships in 1 Business Day
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping
Replace your restrictive OEM intake with this 1.75" Relocated Silicone High Flow Inlet Intake Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF passenger side inlet upgrade kit relocates your coolant reservoir to the driver side while providing a more direct, high flowing intake path for your turbos.
Show More Show Less

Replacement Filter for Carbon Fiber Intake
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Filter color may vary between red and blue
Dinan - Corporate Logo
T#:567379
Part#: D401-0016
Back Ordered
11% off MSRP $ 107.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 95.99 USD
Free Shipping
11% off MSRP
$ 107.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 95.99 USD
Free Shipping
This is a replacement air filter for your Dinan air intake. Replace your dirty, damaged, or lost filter to restore the performance you expect of Dinan and your BMW. Replace your dirty, damaged, or lost filter For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.
Show More Show Less
VRSF - Corporate Logo
T#:584928
Part#: 10901035
Ships in 1 Business Day
$ 179.99 USD
Free Shipping
$ 179.99 USD
Free Shipping
Does not include o-rings Decrease turbo lag and increase throttle response with a high-flow aluminum turbo outlet boost pipe. The OEM outlet has a limiting diameter of less than 1" which creates a significant bottleneck on the turbo. VRSF offers a 2" high flow outlet that replace the restrictive 1" OEM part, offering a significant increase in efficiency and overall output from the turbos. 2' outlets significantly increase throttle response and decreases turbo lag. Made from aircraft grade aluminum to ensure reliability. Fits every turbo and intercooler. Includes everything necessary to upgrade from factory chargepipe. Lifetime warranty.
Show More Show Less

VRSF Stainless Steel High Flow Inlet Intake Kit 2.00" - N54
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:585031
Part#: 10901072
Ships in 1 Business Day
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping
Replace your restrictive OEM intake with this High Flow Inlet Intake Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF inlet upgrade kit relocates your coolant reservoir & vacuum canisters to the driver side while providing a more direct, high flowing intake path for your turbos.
Show More Show Less
VRSF Stainless Steel High Flow Inlet Intake Kit - N54
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:585033
Part#: 10901070
Ships in 1 Business Day
$ 329.99 USD
Free Shipping
$ 329.99 USD
Free Shipping
Replace your restrictive OEM intake with this High Flow Inlet Intake Kit. You will experience drastic increases in flow especially in mid to upper RPM ranges, as well as a more aggressive exhaust note. The VRSF inlet upgrade kit relocates your coolant reservoir & vacuum canisters to the driver side while providing a more direct, high flowing intake path for your turbos.
Show More Show Less

DO88 - Corporate Logo
T#:13891862
Part#: ICM350S
Ships on Sep 24, 2026
$ 831.99 USD
$ 831.99 USD
The team at DO88 has vigorously tested this intercooler to deliver peak performance with the peace of mind of quality for your N55/N54 engine. They guarantee reliability and endurance in all situations to let your car breathe better than before! Boasting a 124% increase in core volume and a 75% larger frontal cooling area, this upgrade is a no-brainer for petrol heads like us. Keeping core temperatures low eliminates the risk of heat soak leading to overheating giving you max performance at any given moment. no compromise has been made at DO88 leaving you with one of the best radiator options on the market!
Show More Show Less

DO88 - Corporate Logo
T#:13891820
Part#: TR270S
Ships on Sep 24, 2026
$ 302.99 USD
Free Shipping on orders $49 and up
The team at DO88 has vigorously tested this intercooler pipe to deliver peak performance with the peace of mind of quality for your N54 engine. They guarantee reliability and endurance in all situations to let your car breathe better than before! Boasting two methanol injection connections and a 36% higher pressure tolerance, this upgrade is a no-brainer for petrol heads like us. With being able to handle high temperatures and pressure, nothing can beat this intercooler pipe kit. No compromise has been made at DO88 leaving you with one of the best intercooler pipe options on the market!
Show More Show Less
VRSF - Corporate Logo
T#:4648641
Part#: 409010
Ships in 1 Business Day
$ 84.99 USD
Free Shipping
$ 84.99 USD
Free Shipping
Replacement filters for your VRSF Performance Intake. Please note these are filters only and do not include mounting connectors.
VRSF Charge Pipe - 335d Coolant Tank & Relocated Intake Inlets - E9X ...
For vehicles with relocated intake inlets only
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:638281
Part#: 335D10901025
Back Ordered
Starting at $ 460.98 USD
Free Shipping
Starting at $ 460.98 USD
Free Shipping
Increase throttle response and decreases turbo lag with the VRSF charge pipe for your 135i/335i/335is. VRSF's aluminum charge pipe features a CNC billet aluminum OEM throttle body flange and is finished in powder-coated black. The VRSF charge pipe retains the OEM c-clip in order to provide a better seal over a conventional clamp/coupler design. This charge pipe is offered with the Tial BOV flange only. Two plugged water injection bungs are included for those who are currently using water injection or interested in using water injection in the future. This charge pipe will only fit cars with relocated inlets and was designed to fit around the 335d coolant tank. VRSF's charge pipes include 2 plugged water injection bungs, caps to cover your intake recirculation ports, and the couplers and clamps necessary for installation.
Show More Show Less


VRSF - Corporate Logo
T#:4744843
Part#: 625018
In Stock
$ 14.99 USD
Free Shipping on orders $49 and up
Replacement o-rings for the VRSF turbo to turbo outlet connections for your N54 BMW. Fits the following VRSF part numbers (as well as most other brand charge pipes): 10901030 & 10901045.
VRSF Intercooler Logo Stencil
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:585083
Part#: 301010
In Stock
$ 14.99 USD
Free Shipping on orders $49 and up
Show off your VRSF intercooler
VRSF N55 Turbo Outlet Charge Pipe O-Ring
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:589208
Part#: 609020
In Stock
$ 12.99 USD
Free Shipping on orders $49 and up
Replace your stock O-ring when upgrading Charge Pipes

DO88 Turbo Inlet Hose - E9X/E8X 135i/335i/35i (54mm)
54mm diameter for vehicles with an upgraded/larger turbocharger only.
DO88 - Corporate Logo
T#:13924833
Part#: DO88KIT213S54
Ships on Sep 24, 2026
$ 325.99 USD
Free Shipping on orders $49 and up
Boasting 59% more airflow, this inlet pipe will let your engine breathe better than ever before! Designed to reduce backpressure, this lets the turbo take in more air giving you more power and better performance!
Show More Show Less

BMW N54 N55 S55 VRSF Charge Pipe Throttle Body O-Ring
We Price Match - Give Us A Call or Chat!
VRSF - Corporate Logo
T#:928441
Part#: 609010
In Stock
$ 14.99 USD
Free Shipping on orders $49 and up
Upgrade your N54, N55, or S55 BMW with this replacement o-ring designed for the charge pipe to throttle body connection. Over time, throttle body o-rings can wear out, leading to reduced performance and potential issues. With this replacement, you can ensure a proper seal and maintain the efficiency of your BMW's engine. Say goodbye to unwanted air leaks and hello to optimal performance.
Show More Show Less
Mishimoto - Corporate Logo
T#:25241773
Part#: MMCP-3035B
In Stock
$ 11.99 USD
Free Shipping on orders $49 and up
This transition coupler is constructed of high-quality heat resistant silicone, making it useful for fitting air intakes, intercooler piping, and more.

Mishimoto - Corporate Logo
T#:51075068
Part#: MMICP-N54-07
Ships in 3 Business Days
New Item
$ 263.99 USD
Free Shipping on orders $49 and up
The Mishimoto N54 Charge Pipe Kit is built to maximize the reliability of your turbocharged BMW.
Mishimoto - Corporate Logo
T#:51075063
Part#: MMICP-N55-11
Ships in 3 Business Days
New Item
$ 349.99 USD
Free Shipping on orders $49 and up
Upgrade your N55's charge air system with the Mishimoto Performance Charge Pipe Kit.

DO88 - Corporate Logo
T#:13891819
Part#: TR290S
Ships on Sep 24, 2026
$ 281.99 USD
Free Shipping on orders $49 and up
The team at DO88 has vigorously tested this intercooler pipe to deliver peak performance with the peace of mind of quality for your N55 engine. They guarantee reliability and endurance in all situations to let your car breathe better than before! Boasting two methanol injection connections and a 38% higher pressure tolerance, this upgrade is a no-brainer for petrol heads like us. With being able to handle high temperatures and pressure, nothing can beat this intercooler pipe kit. No compromise has been made at DO88 leaving you with one of the best intercooler pipe options on the market!
Show More Show Less

E82 135i, E9X 335 Mishimoto Front Mount Intercooler
CARB certified for sale in all 50 states
Mishimoto - Corporate Logo
T#:391661
Part#: MMINT-E90-07
EO#: D-759
Back Ordered
Starting at $ 799.99 USD
Free Shipping on orders $49 and up
Starting at $ 799.99 USD
Free Shipping on orders $49 and up
With 22% more surface area than the factory IC the Mishimoto FMIC kit is more efficient. And that helps maintain your boost levels and performance! The factory intercooler is quickly overcome with heat and that leads to a loss of boost and performance. Factor in greater boost levels and other modifications and the more heat soak will put you out of the running. The solution is an intercooler with more capacity for cooling. 

The best feature of this kit is how easy it is to install. It's a direct bolt-on replacement for your stock intercooler - no removing the bumper or modifying brackets or wrestling with plumbing. Core size measures 20.5"x5.1"x5.3". The entire IC is aluminum, eliminating potential weak spots with plastic end tanks. The CAD and FEM process also allows them to design their cooler internals without any bottlenecks or restrictions. And it comes with Mishimoto's awesome lifetime warranty and accident forgiveness. Fits both N54 and N55 cars. 

This FMIC fits the following BMWs:  
2008-2012  E82 BMW  135i 
2006-2011  E90 BMW  335i 335xi 335i xDrive - Sedan 
2007-2013  E92 BMW  335i 335is 335xi 335i xDrive - Coupe 
2007-2013  E93 BMW  335i - Convertible 
2009+  Z4 BMW  Z4 sDrive35i Z4 sDrive35is 
Show More Show Less
AEM Electronics - Corporate Logo
T#:369781
Part#: 30-3000
In Stock
11% off MSRP $ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
11% off MSRP
$ 674.95

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 599.95 USD
Free Shipping
Increase the power of your vehicle by utilizing a water/meth injection kit. The purpose of water/meth injection is to reduce combustion temperatures and allow you to run higher boost pressures on pump gas. When using meth injection, pump gas will resist detonation much better because the methanol essentially raises the octane rating of the fuel and will allow you to run much more aggressive street tuning. This AEM kit has more features and components than any other comparably priced injection kits on the market. 1 Gallon tank with built in low level switch Boost referenced progressive controller ?Boost Safe? readiness safety system Check valve integrated into nozzle to prevent unintended fluid flow One injector and two nozzles to cover a wide range of HP levels High Pressure 200psi Recirculation-style pump Progressive Controller: Start Injection Boost 1-11psi. Full Injection Boost 6-39psi LED dash light for system status and low fluid warning 20 ft. of injection tubing
Show More Show Less
AEM Electronics - Corporate Logo
T#:20815166
Part#: 30-3313
In Stock
12% off MSRP $ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
12% off MSRP
$ 129.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 114.99 USD
Free Shipping
AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning. Includes interchangeable swirl generators for 250 500 or 1000cc configurations.
Show More Show Less


AEM Electronics - Corporate Logo
T#:590418
Part#: 30-3304
In Stock at Vendor
11% off MSRP $ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping
11% off MSRP
$ 247.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 219.99 USD
Free Shipping

Upgrade your BMW or MINI with the V2 Water/Methanol Standard Controller - Internal MAP W/35PSI Max

This advanced controller optimizes the injection of water/methanol, maximizing power output while ensuring engine safety. With its internal MAP sensor and 35PSI maximum pressure capacity, it offers precise control and reliability under various driving conditions. Experience improved horsepower, torque, and fuel economy with this state-of-the-art controller from a trusted brand.

  • Enhances performance and efficiency for BMW and MINI vehicles
  • Maximizes power output while ensuring engine safety
  • Internal MAP sensor for precise control
  • 35PSI maximum pressure capacity for reliability
  • Improves horsepower, torque, and fuel economy
Show More Show Less
AEM Electronics - Corporate Logo
T#:20815164
Part#: 30-3326
In Stock at Vendor
11% off MSRP $ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD
Free Shipping
11% off MSRP
$ 149.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 132.99 USD
Free Shipping
AEM?s stainless steel Water/Methanol Injection Solenoid (PN 30-3326) eliminates any chance of water/methanol flow into the inlet when the WMI system is not engaged. This affordable water/methanol injection accessory features high flow capability (3,600cc/min) and an impressively low current draw of only 0.75A that does not require the use of an additional relay. The valve body features include 1/8? NPT ports with included push-to-lock ?? hose fittings for easy connection and EPDM seals that stand up to corrosion for years of reliable use. It?s an inexpensive insurance policy to protect your high performance engine regardless of the brand of water/methanol injection system you are using! Features: High flow rating (3600 cc/min @ 150 psi) Low current draw (0.75A @ 13.5V) No additional relay required Standard 1/8?- 27 NPT inlet/outlet with included ?? push-to-lock hose fittings for easy installation Fast response time Tested to 200 PSI Stainless steel enclosure and internals with EPDM seals for corrosion resistance Flying leads simplify connection with user desired connector
Show More Show Less