Home
Suspension
Control Arm Replacements & Upgrades

BMW Control Arm Replacements & Upgrades for BMW 1 Series E82 (2008-2013)

Clear BMW chassis

Control arms, and their integrated ball joints, are some of the most crucial components on a BMW suspension. The control arms literally control the wheel and suspension as they go through their range of motions. They do more than just keep the alignment in a constant spec - they are a vital locating component for the suspension itself. A faulty or worn control arm or ball joint is a very dangerous and potentially life-threatening problem so make sure they are inspected and replaced at regular intervals.

Most control arms for BMWs consist of an inner and outer ball joint made of plastic, rubber, Delrin, or metal and covered in grease with a rubber boot to seal it from the outside. The ball joint rotates and spins as the control arm goes through its movements and that will wear the ball joint and make it loose. The grease inside the housing can also get used up, evaporate, or become contaminated from moisture and foreign particles. As the ball joint becomes worn it can result in excess movement within the housing. Your steering and handling will become less precise and there is usually a light clunking or clicking sound. In rare and extreme cases the ball joint can separate from the control arm completely, leading to a total loss of suspension and steering control. You should have the ball joint play checked annually and replace them every 3-4 years. Most track organizations will not allow a car if they are older than three years.

Control arms also take abuse from impacts and handling forces. Aluminum control arms will generally bend and prevent an accurate alignment. Steel control arms will crack and fracture and require close inspection annually and replacement every 3-4 years.

We sell OE BMW, OEM, and performance upgrade control arms from proven manufacturers. The control arm is so important to a BMW suspension that we insist on only top quality brands and designs and will never sell a control arm based on price alone. We also have upgrade packages with superior designs and better bushing options and we have bundled these together with valuable package savings.

Sub-Categories

Sort By:

SPL Parts Spherical Rear Lower Control Arm Inner Bushing

T#:26904956

Part#: SPLRLBIE9X

In Stock

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Upgrade your vehicle's performance with our replacement rear lower control arm inner bushings. These bushings feature a low-friction, PTFE-lined spherical bearing, enhancing cornering grip and dynamic geometry. By eliminating OEM bushing deflection and binding, our product preserves camber and toe geometry during bumps. Enjoy improved stability and handling precision, thanks to the maintenance-free FK bearings with PTFE linings. Crafted from high-quality materials including 6061-T6 aluminum and FK PTFE-lined spherical bearings, our bushings ensure durability and NVH reduction. Experience the benefits of enhanced performance and reliability with our premium upgrade.

Key Advantages:

Enhanced Rear Cornering Grip Elimination of OEM Bushing Deflection and Binding Improved Dynamic Geometry, Stability, and Handling Precision Maintenance-Free FK Bearings, Manufactured in the US, with PTFE Linings Materials Used:

6061-T6 Aluminum Bearing Shells and Spacers FK PTFE-Lined Spherical Bearings (F1 Specification, Self-Cleaning)

Show More Show Less

SPL Rear Lower Control Arm Knuckle Bushing - Pair - E9X F3X F8X G8X ...

T#:17804825

Part#: SPLRLCBE9X

In Stock

$ 152.00 USD

Add to Wish List

Qty

$ 152.00 USD

Add to Wish List

These Rear Lower Control Arm Knuckle Bushing replace the rubber factory bushing attaching the lower control arm to the knuckle with a low friction teflon-lined spherical bearing. Replacing the OEM component with this bushing will allow for less deflection under heavy load, and less bind as the arm travels through its suspension. We use the largest possible FK bearing in this location for increased longevity and lower NVH. The housing for the bearing is machined out of 6061-T6 aluminum and is CNC cut to +/- .001" tolerance to insure proper fitment. Sold as a pair. Made in the USA. Replaces BMW Part Numbers: 33326775552 33326756249 Applications: 2006 - 2013 E80, E82, E82M 2011 - 2020 F20, F22, F30, F31, F32, F33, F34, F36 2014 - 2021 F80, F82, F83, F87 2022+ G80, G82, G83, G87

Show More Show Less

Rear Guide Rod - Left

T#:23152031

Part#: 33322283547

Ships in 9 Business Days

$ 114.99

This product was last offered at the strikethrough price on
05-07-2026

$ 112.99 USD

Add to Wish List

Qty

$ 112.99 USD

Add to Wish List

SPL Eccentric Lockout Kit - E9X M3

T#:17804826

Part#: SPLELE9M

Ships in 2 Business Days

$ 89.00 USD

Add to Wish List

Qty

$ 89.00 USD

Add to Wish List

The stock eccentric bolts provided by BMW for small camber/toe adjustments tend to slip under high cornering loads, causing changes to the rear alignment. Our SPL Parts Eccentric Lockout Arm (EL) kit eliminate the stock eccentric bolts to keep your rear alignment where you set it. You must have adjustable control arms in order to adjust camber/toe after eliminating the stock eccentric bolts. Our lockout plates are CNC machined from 6061-T6 Aluminum and supplied with CAD plated grade 10.9 hardware for absolutely zero-slip. One kit includes washers and bolts for both camber arms. Sold as a complete kit for one car. Made in the USA. Application List: 2006 - 2011 E8X M-Series 2006 – 2011 E9X M-Series

Show More Show Less

BMW E82 E9X Rear Guide Rod - Right

T#:15048405

Part#: 33322283548

Ships in 9 Business Days

$ 94.99

This product was last offered at the strikethrough price on
05-07-2026

$ 77.54 USD

Add to Wish List

Qty

$ 77.54 USD

Add to Wish List

BMW E82 E9X Rear Guide Rod - Right is an essential component that connects the spindle assembly to the rear subframe of the vehicle. This high-quality guide rod is designed to enhance the stability and handling of the BMW E82 and E9X models, ensuring optimal performance and safety.

Improved Stability: Ensures a solid connection between the spindle assembly and rear subframe.
Enhanced Handling: Contributes to better vehicle control and responsiveness.
Durable Construction: Built to withstand rigorous driving conditions.
OEM Quality: Meets or exceeds factory specifications for fit and performance.
Easy Installation: Direct replacement for the factory guide rod.

Show More Show Less

Right Front Control Arm - E9X M3, E82 1M Coupe

T#:20946735

Part#: 31102283578

In Stock at Vendor

$ 110.99

This product was last offered at the strikethrough price on
05-07-2026

$ 108.99 USD

Add to Wish List

Qty

$ 108.99 USD

Add to Wish List

Replacement for worn out or failing control arms, a common cause of loose steering. This control arm is found on the E9X M3 and can be fitted to non-M E9X vehicles. It features a stiffer bushing for added feedback and stability, as well as a negative camber increase for more front grip.

Show More Show Less

Front Control Arm Replacement Kit - E9X M3, E82 1M Coupe

T#:23053152

Part#: 31102283578KT

Ships in 2 Business Days

$ 201.99 USD

Add to Wish List

Qty

$ 201.99 USD

Add to Wish List

Replacement kit for worn out or failing control arms, a common cause of loose front end feel. These control arms are found on the E9X M3 and are a bolt-on upgrade for non-M E9X vehicles. They boast a stiffer bushing for added feedback and stability, as well as a negative camber increase for more front grip.

Show More Show Less

Left Front Control Arm - E9X M3, E82 1M Coupe

T#:23053148

Part#: 31102283577

Ships in 2 Business Days

$ 93.99 USD

Add to Wish List

Qty

$ 93.99 USD

Add to Wish List

Replacement for worn out or failing control arms, a common cause of loose steering. This control arm is found on the E9X M3 and can be fitted to non-M E9X vehicles. It features a stiffer bushing for added feedback and stability, as well as a negative camber increase for more front grip.

Show More Show Less

Rod End Boot (14-18mm) - Priced Each

10X Entries Into Our F80 M3 Sweepstakes

T#:599632

Part#: RERS3

In Stock

Sale - Save 46% $ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 15.00 USD

Add to Wish List

Qty

Sale - Save 46%

$ 27.99

This product was last offered at the strikethrough price on
03-27-2026

$ 15.00 USD

Add to Wish List

Extend the life of your heim joints with this flexible rubber protective boot. Designed to fit 14mm–18mm spherical bearings and rod ends, it shields critical components from dirt, moisture, and road debris. Keeping contaminants out helps ensure consistent performance and reduces wear over time.

Show More Show Less

Select Vehicle

Purpose

Category

Control Arm Replacements & Upgrades
- Front Control Arm (3)
- Rear Control Arm (5)

Brand

View All Brands

Price

Special Offers

On Sale (1)

Shipping