BMW Performance Chips & Software for BMW X Series E84 (2013-2015)

MHD Wireless OBDII Wifi Flash Adapter V2 - BMW E, F, & G Chassis ...

T#:9126157

Part#: MHDWIRELESSV2

Ships in 10 Business Days

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

The new MHD Wireless OBDII WiFi Flash Adapter V2 allows you to reliably load flash maps to your BMW including JB4 back-end flash maps faster and easier than ever before. Just pair it with your Android or Apple phone and plug it into the OBDII port when you want to flash or use any MHD features. Compatible with E, F, or G Chassis BMWs with the following engines: N54, N55, S55, B58, S58, S63, & N13

NOTE: Additional engines & vehicles may be supported with Non-MHD applications such as Bimmercode or xHP. If your engine is not listed above, please check with the app you intend to use for compatibility with your vehicle.

MHD Flash Adapter Features & Benefits

Compatible with the MHD Flashing Platform, BimmerCode, xHP, and many other wifi diagnostic apps

Load both MHD off-the-shelf maps and custom flash maps (available for limited applications - N54, N55, S55, B58, S58, S63, N13)

Faster flash times compared to wired OBDII cable

Uses Wifi for a reliable connection

Applications

E Chassis BMW

F Chassis BMW

G Chassis BMW

BimmerCode App & Info

All you need for coding your car with BimmerCode is one of the supported MHD OBD adapters and the BimmerCode phone app - https://bimmercode.app/

Show More Show Less

THOR OBDII Wifi Dongle - BMW E/F/G Chassis w/ OBDII

T#:568728

Part#: OBD2WIFI1

Ships on Jul 31, 2025

$ 58.99 USD

Add to Wish List

Qty

$ 58.99 USD

Add to Wish List

With the advent of quick flash software and the increasing popularity of DME re-coding, having the proper interface has never been more crucial. Until now, many have resorted to chains of OBD-USB-Mini USB as the primary method of talking with the cars computer. While this is certainly functional, the user is limited by the length of the cable he or she purchased. Forget about setting your laptop on the workbench...slide that seat back, get cozy and don't you dare shake that cable... Those days are over. Enter the THOR OBDII WIFI dongle. This revolutionary little box is not only compatible with a host of tuning apps including XHP and THOR; but also completely functional with INPA, Tool32, NCSExpert, and WinkFP. Gone are the days of sitting in the driver's seat with your phone or laptop, now you can flash and code from the workbench or your couch if so choose. Clear a spot in the bottom of your toolbox for those amazon cables, you won't be needing them anymore. Features: Reliable, strong WiFi signal Faster flash-times, compared to standard OBD/INPA cable Tested and proven to perform flawlessly and built to last

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Pinned Power Wire - F-Chassis &a...

T#:598298

Part#: JB4-SPWCK-F

In Stock

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it in to the JB4 where your BMS DATA cable connects, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS®, or Android and sold separately via the Apple® or Android® app store on your phone. The wireless adapter is not compatible with the JB4 windows interface. See our other listings for the "BMS DATA cable" for laptop use.

Show More Show Less

BMS Pedal Tuner - N52, N54, N55

T#:586269

Part#: BMSPBT

In Stock

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

XHP Flashtool Wifi OBD Adapter - Multiple BMW Fitments

T#:7052655

Part#: XHP-FLASHTOOL

Ships Aug 11, 2025

$ 79.99 USD

Add to Wish List

Qty

$ 79.99 USD

Add to Wish List

Access your BMWs DME wirelessly by connecting to your phone! The enthusiast's tool of choice for xHP Flashtool and many other transmission and engine tuning options.

Motiv ReFlex+ for BMW

T#:17970629

Part#: RFXF02UI6

In Stock

$ 809.00 USD

Add to Wish List

Qty

$ 809.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

F/G Chassis Kies WiFi ENET Adapter

T#:4319895

Part#: KIES07-WIFI-AD

Back Ordered

$ 99.99 USD

Add to Wish List

Qty

$ 99.99 USD

Add to Wish List

A Wireless ENET Adapter tool, powered directly by your OBD!

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

T#:28537533

Part#: 101-0216

In Stock

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

JB4 Bluetooth Wireless Connect Kit - Separate Power Wire - E-Chassis ...

For use with older E chassis BMW JB4 systems with the square plastic case.

T#:403194

Part#: JB4-BT

In Stock

$ 169.00 USD

Add to Wish List

Qty

$ 169.00 USD

Add to Wish List

The JB4 Connect Kit (Rev 3.7) allows your Bluetooth 4.0 compatible iOS and Android devices to connect wirelessly to your JB4. View critical engine data in real-time, datalog, read codes, change maps, update settings, update firmware, and more, all from the palm of your hand! The REV3 mounts next to the JB4 in the engine bay eliminating the need to run a BMS DATA cable inside the cabin. It's compatible with all JB4 products. Just plug it into the JB4 where your BMS DATA cable connects, attach the power and ground wire to the JB4 harness using the included connectors, purchase the JB4 Mobile app, and you're off and running. Please note the JB4 Mobile app is available for iPhone®, iOS, or Android® and sold separately via the Apple® or Android® app store on your phone. This adapter is not compatible with the JB4 windows interface.

Show More Show Less

BMS Pedal Tuner - N52, N54, N55 (Manual Transmission)

T#:20155613

Part#: BMSPBT-M

Ships on Jul 14, 2025

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

The BMS Pedal Tuner is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air-fuel ratio and spark timing. Made specifically for the BMW inline six-cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map". The BMS Pedal Tuner contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response. The BMS Pedal Tuner will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non-responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your driver's seat to feel the difference. The BMS Pedal Tuner is a clear choice. Features: Throttle Re-mapping for Better Response / Reaction Removes "dead area" delay in gas pedal 7 Different Maps / Settings for more enjoyable driving Can be set and turned on and off from inside the car Invisible to dealers equipment Made in USA

Show More Show Less

Motiv ReFlex Lite: Advanced Sequential Injector Controller - Inline-6...

T#:29234298

Part#: 910.1011

In Stock

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

Throttle Booster

5X Entries For Our Spin To Win Sweepstakes! Call In, Chat, Or Email, For Best Price! Limited Time Only!

T#:11693563

Part#: D440-1700

In Stock

$ 269.99 USD

Add to Wish List

Qty

$ 269.99 USD

Add to Wish List

Motiv ReFlex+ Control Unit

T#:29101684

Part#: 900.1001

In Stock

$ 679.00 USD

Add to Wish List

Qty

$ 679.00 USD

Add to Wish List

The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.

Show More Show Less

RaceChip XLR Throttle Controller With App Control - BMW

T#:4126650

Part#: 999981

Ships in 3 Business Days

$ 299.00 USD

Add to Wish List

Qty

$ 299.00 USD

Add to Wish List

RaceChip developed the new XLR to increase responsiveness on the road. Their innovative throttle tuning system lets you tune your engine’s reactions to your taste – choose from 7 separate stages (Eco+, Eco, Neutral, Sport, Sport+, Race, and Race+). Your engine’s performance isn’t affected by RaceChip XLR, but you can access it more immediately and directly. Experience significantly sharper responses for yourself – no waiting for the message to get through or frustrating “pauses for thought”. And the best thing: installation is simple and requires no specialist knowledge. Try it now! The Brainbox: The Brainbox is the nerve center of XLR and controls the processes needed to optimize throttle response. The Brainbox’s compact size (ca. 70 x 80 mm) allows it to be fitted easily in the footwell of your vehicle. As it is so flat, it does not restrict the driver’s legroom at all. It can be fixed almost anywhere in the footwell, for example in existing slots or vents. The Controller: The XLR Controller allows you to choose between 7 stages: Eco+, Eco, Neutral, Sport, Sport+, Race and Race+. Each stage sharpens your car’s throttle response a little more, until in Race+ it’s like a thoroughbred sports car. You can mount the Controller anywhere in the car so that it’s in the right place for how you want to use it. The size and design mean it fits right in with the rest of the interior and the other control elements. App Control: RaceChip is the first company to offer throttle tuning together with app control. The combination gives you the easiest ever way of controlling your vehicle’s throttle response. RaceChip XLR connects directly with the RaceChip app on your smartphone via Bluetooth. If you already have a RaceChip chip tuning module in your car, XLR is the perfect add-on, and using them together is even easier – you can control both modules from the driver’s smartphone using the same app.

Show More Show Less

BMS JB4 Port Injection Controller - F/G Chassis

T#:21012590

Part#: F-G-PORTINJCONMO

In Stock

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety. For example the JB4 port injection controller: 1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions. 2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires. 3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition. 4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc. 5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue. 6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes. 7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement. 8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes. 9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up. 10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process. 11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.

Show More Show Less

RaceChip Tuning Module - N55 F Chassis

BMW used two different engine harnesses, please confirm if you have type A or B before ordering

T#:641521

Part#: RACECHIPN55

In Stock

Starting at $ 239.00 USD

Add to Wish List

Starting at $ 239.00 USD

Add to Wish List

BMW used two different engine harnesses, please confirm if you have type A or B before ordering. It’s sufficient to locate only one of the sensors because the plug type is always the same for both of them (pictured above in the second photo). Harness Type A - Third Photo/Harness Type B - Fourth Photo RaceChip is the largest chip tuning company in the world! Their products are made in Germany and rigorously tested on the Autobahn. RaceChip offers the next generation of performance tuning. It allows for up to 30% more Horsepower and 20% better Gas Mileage with a very simple installation process. Unlock the untapped performance of your BMW engine with peace of mind from RaceChip. S: 5 Tune Mappings +51 HP +70 lb-ft Torque Up to +15% MPG Includes everything you need for installation, down to the cable ties. RS: 6 Tune Mappings +63 HP +88 lb-ft Torque Up to +20% MPG Includes everything you need for installation, down to the cable ties. GTS: 7 Tune Mappings +77 HP +105 lb-ft Torque Up to +20% MPG Limited 2 year engine warranty Built in warm-up timer One time reprogramming if used on different vehicle Includes everything you need for installation, down to the cable ties. XLR Throttle Controller: RaceChip developed the new XLR to increase responsiveness on the road. Their innovative throttle tuning system lets you tune your engine’s reactions to your taste – choose from 7 separate stages (Eco+, Eco, Neutral, Sport, Sport+, Race, and Race+). Your engine’s performance isn’t affected by RaceChip XLR, but you can access it more immediately and directly. Experience significantly sharper responses for yourself – no waiting for the message to get through or frustrating “pauses for thought”. And the best thing: installation is simple and requires no specialist knowledge. Try it now! The Brainbox: The Brainbox is the nerve center of XLR and controls the processes needed to optimize throttle response. The Brainbox’s compact size (ca. 70 x 80 mm) allows it to be fitted easily in the footwell of your vehicle. As it is so flat, it does not restrict the driver’s legroom at all. It can be fixed almost anywhere in the footwell, for example in existing slots or vents. The Controller: The XLR Controller allows you to choose between 7 stages: Eco+, Eco, Neutral, Sport, Sport+, Race and Race+. Each stage sharpens your car’s throttle response a little more, until in Race+ it’s like a thoroughbred sports car. You can mount the Controller anywhere in the car so that it’s in the right place for how you want to use it. The size and design mean it fits right in with the rest of the interior and the other control elements.

Show More Show Less

Dinan Stage 2 Performance Engine Software Tune - BMW E82/88 E84 E70/7...

5X Entries For Our Spin To Win Sweepstakes! This Tune requires the customer's vehicle to be dropped off at our Wadsworth, Ohio facility and picked

T#:5858438

Part#: D900-31T

EO#: D-176-39

In Stock

$ 249.99 USD

Add to Wish List

Qty

$ 249.99 USD

Add to Wish List

The Dinan Team made a blistering fast software upgrade, using our years of experience tuning BMWs for the street as well as winning back-to-back Grand-AM DP Championships and the 2011 24 Hours of Daytona. Dinan Performance Software is so much more than just turning up the turbo boost. It is a fully re-tuned engine management program that maximizes power while keeping all the BMW factory safeguards in place. Protecting your BMW while giving the most performance is the definition of "Performance Without Sacrifice". Drivetrain and engine components are analyzed for strength then the program is tested on the dyno and in the real world for durability and drivability. Dinan matches the new car warranty coverage for up to 4 years or 50,000 miles including the possibility of consequential damages. The top speed governor is removed on Manual RWD vehicles only, enabling the BMW to achieve its full potential. Features: More Power: Max gains of +55 HP @ 3900 RPM and +74 lb-ft TRQ @ 3900 RPM 50 State Emissions legal; CARB EO # D-176-39 Huge torque gains drastically improves acceleration No hesitation between shifts Downloads through the BMW diagnostic port, the same way BMW loads software Top speed governor removed on manual RWD vehicles, you decided how fast you want to go. *The stock top speed governor is retained for automatic transmission vehicles. Full Map Rescaling, for drivability from idle to wide-open throttle and everywhere in between Properly Returned Fuel Mixtures, to save you gas and protect your engine Water Pump Speed Increased, to improve cooling Retain all BMW factory engine damage safeguards

Show More Show Less

S1N20 - N20/N26 Stage 1 (All N20/N26)

T#:402632

Part#: S1-N20

In Stock

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

Gains of up to 35HP and 50lb/ft! This plug and play BMW tuner attaches to two easy to access sensors in the engine bay and works with your factory DME tuning to remap your boost, timing, and fueling for optimal performance and reduced turbo lag. It features a 64mhz processor allowing sensors to be sampled 800 times per second using dedicated 10 bit digital to analog converters, ensuring smooth and powerful performance! Installation is very discrete and it is quickly removed without a trace when needed. Fuel economy during normal driving is unchanged. Compatible with all driving modes. Stage 1 BMW Tuner Features & Benefits Improves 0-60 times and 1/4 mile times Quick Plug & Play Installation Runs as smoothly as stock, this is how your vehicle should have come from the factory Compatible with all driving modes Fuel economy unchanged during normal driving Not VIN locked and can be removed without a trace and resold down the road Made in the USA Not for sale or use in the state of California.

Show More Show Less

DINANTRONICS X Performance Tuner - BMW F22/23 F25/26 F3X Z4 N20/26 2....

5X Entries For Our Spin To Win Sweepstakes! For model years 2012-2018 only

T#:6181656

Part#: D440-0127

Ships in 10 Business Days

$ 609.99 USD

Add to Wish List

Qty

$ 609.99 USD

Add to Wish List

The DINANTRONICS X is the newest installment of the highly successful Dinan foray into inline tuning modules. Like its predecessors, it is a highly engineered piece of computer hardware and software that enhances engine performance to levels the stock programming is not allowed to venture. It does this without affecting long-term reliability or the functionality of on-board diagnostic systems when run under recommended operating variables. Unlike its predecessor, however, the DINANTRONICS X is Bluetooth smart and offers convenient access to the adjustment of power levels directly from the palm of your hand. A further advancement beyond its entry-level little brother, the DINANTRONICS SPORT, X connects to additional inputs and/or has a more refined tuning strategy that yields more power as a result. For those that do not wish to (or can't) alter their stock ECU with a more robust engine flash the DINANTRONICS X is a perfect alternative to satiate the craving for "more". Whichever level of engine tuning is ultimately chosen you can be sure to be pleased by the result. The Dinan Difference is possible by employing a full staff of talented engineers that are well rounded in many facets of automotive engineering and backed by a wealth of hands-on knowledge. Stemming from diverse backgrounds not only on racing teams but on standard factory production line vehicles, we have seen it all. Manipulating these signals/maps with an adept hand, all the while keeping an engine running at its best and with the most reliable power, is what Dinan is all about. Features: More Power: Max gains of up to +45 HP and +38 lb-ft TRQ (Crank); +39 HP and +34 lb-ft TRQ (Wheel). Bluetooth smart (Android and iOS Compatible). App download/pairing process is detailed within the installation instructions located under the Tech Resources dropdown below. 7 power levels and a bypass setting to choose from. Smooth and predictable power delivery. On-board diagnostics and factory safeguards maintained. Unaffected by dealer factory updates. Plug and play installation. 14-day satisfaction guarantee. 1 year limited warranty. NOTE: The DINANTRONICS X offers an array of different power levels (maps). These maps range from a bypass/stock setting at map 0 to a maximum power setting at map 7. The unit is shipped in map 5. This middle ground setting should be acceptable for all vehicle/engine configurations. However, you can adjust up or down as you see fit for your needs and/or modifications. Please note however that for each map level, we highly recommend the minimum fuel octane rating to run listed below. If you sense any unusual or unexpected behavior immediately turn down the map to a lower setting that did not exhibit the condition. MAP (S) / MINIMUM OCTANE 1-3 - 91 4-5 - 91/93 6 - 93 7 - 93+ *DINANTRONICS X does not carry the factory matching warranty that Dinan is known for. DINANTRONICS X's warranty is a 1-year, product-only warranty, that does not cover consequential damages or labor reimbursement. EMISSIONS NOTICE: This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status.

Show More Show Less

RaceChip GTS Black With App Control - Harness Type B

T#:641529

Part#: 916736B

Ships in 3 Business Days

$ 658.00 USD

Add to Wish List

Qty

$ 658.00 USD

Add to Wish List

Burger Motorsports JB4 Tuner - E84 E89 N20/N26

T#:402623

Part#: JB4-N20-X1

Ships in 1 Business Day

$ 529.00 USD

Add to Wish List

Qty

$ 529.00 USD

Add to Wish List

You've heard about it before, and now it's available here at Turner Motorsport! The Burger Motorsport JB4 Tuner is one of the most versatile, adaptable modifications you can make to your BMW, and among the simplest to install. A true plug & play solution, the JB4 offers support for everything from stock cars to fully built monsters. Stock cars can expect gains of up to 50 wheel horsepower, while modified cars can expect to see gains of over 100 WHP! With an additional cable, you can connect your smart device or laptop to enjoy datalogging and tuning capabilities. It's all-inclusive and fully featured - it's the JB4 from Turner Motorsport. Order yours today!

Show More Show Less

Motiv ReFlex+

T#:29101668

Part#: 910.1001

Ships in 4 Business Days

$ 789.00 USD

Add to Wish List

Qty

$ 789.00 USD

Add to Wish List

The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.

Show More Show Less

RaceChip XLR5 - BMW & MINI Cooper

T#:38688929

Part#: 999982BMW

Special Order: No Guaranteed ETA

$ 259.00 USD

Add to Wish List

Qty

$ 259.00 USD

Add to Wish List

With the RaceChip XLR5, you can easily tune your car's throttle response via app to your taste – from a comfortable sedan to a racy sports car. That makes it the perfect add-on to our chip tuning boxes.

Show More Show Less

Dinan Stage 3 Performance Engine Software Tune - BMW E82/88 E84 E70/7...

5X Entries For Our Spin To Win Sweepstakes! This Tune requires the customer's vehicle to be dropped off at our Wadsworth, Ohio facility and picked

T#:5858439

Part#: D900-31TC

EO#: D-176-39

In Stock

$ 299.99 USD

Add to Wish List

Qty

$ 299.99 USD

Add to Wish List

NOTE: Stage 3 Engine Software is for use with the Dinan Oil Cooler and Intercooler; optimizing performance and drivability from the combination. The Dinan Team made a blistering fast software upgrade, using our years of experience tuning BMWs for the street as well as winning back-to-back Grand-AM DP Championships and the 2011 24 Hours of Daytona. Dinan Performance Software is so much more than just turning up the turbo boost. It is a fully re-tuned engine management program that maximizes power while keeping all the BMW factory safeguards in place. Protecting your BMW while giving the most performance is the definition of "Performance Without Sacrifice". Drivetrain and engine components are analyzed for strength then the program is tested on the dyno and in the real world for durability and drivability. Dinan matches the new car warranty coverage for up to 4 years or 50,000 miles including the possibility of consequential damages. The top speed governor is removed on Manual RWD vehicles only, enabling the BMW to achieve its full potential. Features: More Power (with Oil Cooler and Intercooler): Max gains of +60 HP @ 5300 RPM and +80 lb-ft TRQ @ 3900 RPM 50 State Emissions legal; CARB EO # D-176-39 Huge torque gains drastically improves acceleration No hesitation between shifts Downloads through the BMW diagnostic port, the same way BMW loads software Top speed governor removed on manual RWD vehicles, you decided how fast you want to go. Full Map Rescaling, for drivability from idle to wide-open throttle and everywhere in between Properly Returned Fuel Mixtures, to save you gas and protect your engine Water Pump Speed Increased, to improve cooling Retain all BMW factory engine damage safeguards

Show More Show Less

BMS JB4 Port Injection Controller - N55 E-Chassis

T#:21012586

Part#: N55-PORTINJCONMO

Ships on Jul 14, 2025

$ 349.00 USD

Add to Wish List

Qty

$ 349.00 USD

Add to Wish List

The Burger Motorsports JB4 Port Injection Controller attaches to the JB4 allowing it to directly control both traditional port injection kits and WMI port injection kits. The JB4 port injection controller is a fully integrated solution allowing enhanced port injection mapping and safety. For example the JB4 port injection controller: 1) Uses low fuel pressure in conjunction with boost pressure to evaluate injection pressure and adjust PI IPW dynamically as required to maintain consistent flow volume. This becomes particularly important in applications that are at the edge of their low fuel pressure supply. As low pressure drops or oscillates port injection IPW must be dynamically adjusted to avoid run lean conditions. 2) Monitors pedal input, clutch input, gear, throttle position, etc, allowing more advanced mapping and instant cut of PI when letting off the gas or when traction control kicks in to avoid backfires. 3) Monitors AFR in both banks and can cut PI flow in the event a misfire event is detected preventing a potentially lean condition. 4) Monitors current through the injectors and sends a signal back to the JB4 altering it of various problems including a clogged or disconnected injector, blown electrical fuse, loose ground, etc. 5) Monitors fuel trims in each bank and failsafe's in the event of a mismatch of more than 15% indicating a potential boost single cylinder boost leak or injector flow issue. 6) Allows easy user adjustment of overall fuel volume using linear "Fuel Bias 0-100" values by RPM, greatly reducing the typical mapping complications when making manual tuning changes. 7) Integrates into the JB4 multi-map system which produces on-the-fly PI mapping changes when you change maps when boost is reduced in lower gears, or during anti-lag engagement. 8) When equipped with a JB4 integrated flex fuel sensor or JB4 virtual flex fuel sensor can automatically adjust port injection volume based on the E85 mixture allowing for easy mixture changes. 9) Enhanced mapping logic such as tip in supplement to boost port injection during sudden transitions like spool up or gear changes where the high-pressure pump tends to have problems keeping up. 10) Does not require a separate interface and cable for mapping and tuning port injection. It's all done right through the JB4 interface and logs greatly simplifying the process. 11) Includes an extra output to run your second fuel pump OR WMI PUMP (for port injection meth), eliminating the need for an extra Hobbs switch.

Show More Show Less

AFE Power Scorcher GT Power Module - BMW F22/23 F3X E84 F10 F25 F26 N...

T#:401282

Part#: 77-46316

In Stock at Vendor

$ 555.99 USD

Add to Wish List

Qty

$ 555.99 USD

Add to Wish List

A simple 30-minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high-quality case & wire harness with factory-style connectors for an easy plug-and-play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) . This performance module increase turbo boost. It improves vehicle performance and throttle response. In testing, this module resulted in significant +41 horsepower and up to +58 lbs. x ft. of torque verified by our in house dyno. Direct Plug & Play Power: This quick and easy plug & play SCORCHER GT module adds significant power by altering pressure sensor signals to increase turbo boost to improve vehicle efficiency, power and throttle response. In-Cabin On-the-Fly Power Adjustments: SCORCHER GT modules feature In-Cabin On-the-Fly power adjustment to accommodate any situation. This adjustment is controlled by via LED light switch with a button that can be easily mounted in any location in the cabin. High Quality Case & Wire Harness: aFe SCORCHER GT modules uses high-quality aluminum extrusion black powder-coated enclosure casing and factory-style connectors which require no modification to your factory harness. These factory-style connectors, plugs directly into the stock wiring harness connectors and sensors. High Precision and Quality: SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products. aFe POWER does not recommend to use with any other tuners or modules. This SCORCHER GT is not CARB-exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles. Quick and easy plug & play installation without any modifications Around 30 minute installation Dyno tested and produced significant power increases of +41 HP / +58 lbs. x ft. torque Increase turbo boost to improve vehicle performance, efficiency and throttle response In-cabin on-the-fly Power Adjustments via LED light switch 4-power position settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) Leaves no trace on ECU (No Footprint) High-quality case & wire harness w/ factory style connectors High reliability, 100% of units tested Compatible with other aFe POWER performance products

Show More Show Less

ReFlex+ Install Kit

T#:29267513

Part#: 400.1001

Ships in 4 Business Days

$ 15.00 USD

Add to Wish List

Qty

$ 15.00 USD

Add to Wish List

RaceChip Tuning Module - N20

T#:641461

Part#: RACECHIPN20

Ships in 3 Business Days

Starting at $ 548.00 USD

Add to Wish List

Starting at $ 548.00 USD

Add to Wish List

RaceChip is the largest chip tuning company in the world! Their products are made in Germany and rigorously tested on the Autobahn. RaceChip offers the next generation of performance tuning. It allows for up to 30% more Horsepower and 20% better Gas Mileage with a very simple installation process. Unlock the untapped performance of your BMW engine with peace of mind from RaceChip. S: 5 Tune Mappings +32 HP +60 lb-ft Torque Up to +15% MPG Includes everything you need for installation, down to the cable ties. RS: 6 Tune Mappings +40 HP +75 lb-ft Torque Up to +20% MPG Includes everything you need for installation, down to the cable ties. GTS: 7 Tune Mappings +48 HP +90 lb-ft Torque Up to +20% MPG Limited 2 year engine warranty Built in warm-up timer One time reprogramming if used on different vehicle Includes everything you need for installation, down to the cable ties. XLR Throttle Controller: RaceChip developed the new XLR to increase responsiveness on the road. Their innovative throttle tuning system lets you tune your engine’s reactions to your taste – choose from 7 separate stages (Eco+, Eco, Neutral, Sport, Sport+, Race, and Race+). Your engine’s performance isn’t affected by RaceChip XLR, but you can access it more immediately and directly. Experience significantly sharper responses for yourself – no waiting for the message to get through or frustrating “pauses for thought”. And the best thing: installation is simple and requires no specialist knowledge. Try it now! The Brainbox: The Brainbox is the nerve center of XLR and controls the processes needed to optimize throttle response. The Brainbox’s compact size (ca. 70 x 80 mm) allows it to be fitted easily in the footwell of your vehicle. As it is so flat, it does not restrict the driver’s legroom at all. It can be fixed almost anywhere in the footwell, for example in existing slots or vents. The Controller: The XLR Controller allows you to choose between 7 stages: Eco+, Eco, Neutral, Sport, Sport+, Race and Race+. Each stage sharpens your car’s throttle response a little more, until in Race+ it’s like a thoroughbred sports car. You can mount the Controller anywhere in the car so that it’s in the right place for how you want to use it. The size and design mean it fits right in with the rest of the interior and the other control elements.

Show More Show Less

DAHLer BMW Engine Performance Tuning - N55

For pre-order

T#:13793004

Part#: DAHELECS-TUNE-N5

Special Order: No Guaranteed ETA

$ 2,197.99 USD

Add to Wish List

Qty

$ 2,197.99 USD

Add to Wish List

Dahler's N55 tune is simply plug-and-play. Designed and made to pull out maximum power, this tune won't throw any codes and has plugs to connect in-line with each boost pressure sensor and camshaft position sensor on the vehicle's engine. The module can be controlled by and app via your smartphone and has 3 customizable driving programs, (race, comfort, and eco). The kit also comes with an adapter that can revert the car to its original state without removing the harness for situations where the tune isn't necessary, for instance, a shop appointment, or valet. The Dahler module is undetectable to diagnostic readers so there is no trace of its existence.

Show More Show Less

ReFlex Lite: Advanced Sequential Injector Controller - Inline-4 ...

T#:29234292

Part#: 910.1010

Back Ordered

$ 449.00 USD

Add to Wish List

Qty

$ 449.00 USD

Add to Wish List

The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-4 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Performance Chips & Software for BMW X Series E84 (2013-2015)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results