BMW Electrical Sensors, Switches, & Relays for BMW X Series E84 (2013-2015)

Clear BMW chassis

Please ensure your correct model is selected

Electrical gremlins can be very frustrating. Luckily your BMW's electrical system is better than most, even if it's 25 years old. Here you will find electrical relays, sensors, switches, and modules for the engine, camshaft, and crankshaft. Our parts are OEM, Genuine BMW, or approved aftermarket brands that we have an excellent track record with. There is no middle ground with electrical parts - it either works perfectly or not. And there's nothing more frustrating than a new part that fails right out of the box. So it's important to choose quality replacement parts over a cheap but faulty piece.

Sub-Categories

Sort By:

Motiv Motorsports - Corporate Logo
T#:17970629
Part#: RFXF02UI6
In Stock
$ 859.00 USD
Free Shipping on orders $49 and up
The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.
Show More Show Less
Motiv Motorsports - Corporate Logo
T#:28537533
Part#: 101-0216
In Stock
$ 105.00 USD
Free Shipping on orders $49 and up

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

  • Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
  • Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
  • Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
  • High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less
BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness
For Vehicles With Motiv ReFlex Unit Currently Installed Only
Motiv Motorsports - Corporate Logo
T#:22723690
Part#: 101-0212
In Stock
$ 49.00 USD
Free Shipping on orders $49 and up
$ 49.00 USD
Free Shipping on orders $49 and up

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

  • Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
  • Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
  • Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
  • No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less

ECS - Corporate Logo
T#:48367010
Part#: 059226LA01
In Stock
Sale - Save 3% $ 30.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD
Free Shipping
Sale - Save 3%
$ 30.99

This product was last offered at the strikethrough price on
06-14-2026

$ 29.99 USD
Free Shipping

If you're experiencing hard starting, flaky charging, or other electrical issues, your engine ground strap may be the culprit. On E9X BMWs, the engine ground strap is a thin, non-insulated cable that spans from the left engine mount arm to the frame horn. Despite the seemingly simple nature of this part, on older cars, it is known to cause massive headaches. Due to its non-insulated design, years of exposure to water, dirt, and road salt will cause the wire to corrode, ultimately leading to complete failure. A break in this cable will cause an open circuit, resulting in issues with the vehicle's electrical system and potentially leading to a no-start condition.

To solve this issue, ECS has engineered an exact-fit, upgraded ground strap for your E9X BMW! Unlike its OEM counterpart, this design features insulated, large-gauge copper wire for dependable conductivity and long-lasting durability. Additionally, factory-style lugs are zinc-coated, crimped, and soldered, ensuring protection against corrosion and oxidation.

Whether you're replacing a visibly corroded strap or proactively preventing failure, this solution from ECS is sure to provide lasting performance and protection.

FEATURES

Direct-fit replacement and upgrade for RWD E82/E88, E84, and E9X applications Solves intermittent grounding issues caused by aging OEM straps Clean, stealthy design that fits seamlessly in factory engine bays Factory length and lug orientation for drop-in fitment 2 AWG tinned copper cable for excellent conductivity and corrosion resistance Zinc-coated lugs, crimped and soldered to resist moisture and oxidation Black UL1015-grade insulation withstands oil, heat, and abrasion Discreet ECS label for a clean, OEM+ look Replaces OEM part numbers 12427549393, 12427795404, and 12427790559.

Show More Show Less

Bosch - Corporate Logo
T#:558831
Part#: 12317561939
In Stock
$ 61.91 USD
Free Shipping on orders $49 and up

Ensure the correct voltage is being sent to/from the alternator, keep you electrical system safe from excessive voltage peaks that could cause damage to sensitive electronics and blow out fuses. Bosch's high quality unit will give you peace of mind knowing the electrical system will be safe and the voltage will remain steady. OEM replacement for BMW part # 12317561939

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Show More Show Less
ECS - Corporate Logo
T#:48642696
Part#: 059226LA02
In Stock
Sale - Save 25% $ 30.99

This product was last offered at the strikethrough price on
06-14-2026

$ 23.24 USD
Free Shipping
Sale - Save 25%
$ 30.99

This product was last offered at the strikethrough price on
06-14-2026

$ 23.24 USD
Free Shipping

If you're experiencing hard starting, flaky charging, or other electrical issues, your engine ground strap may be the culprit. On E9X BMWs, the engine ground strap is a thin, non-insulated cable that spans from the left engine mount arm to the frame horn. Despite the seemingly simple nature of this part, on older cars, it is known to cause massive headaches. Due to its non-insulated design, years of exposure to water, dirt, and road salt will cause the wire to corrode, ultimately leading to complete failure. A break in this cable will cause an open circuit, resulting in issues with the vehicle's electrical system and potentially leading to a no-start condition.

To solve this issue, ECS has engineered an exact-fit, upgraded ground strap for your E9X BMW! Unlike its OEM counterpart, this design features insulated, large-gauge copper wire for dependable conductivity and long-lasting durability. Additionally, factory-style lugs are zinc-coated, crimped, and soldered, ensuring protection against corrosion and oxidation.

Whether you're replacing a visibly corroded strap or proactively preventing failure, this solution from ECS is sure to provide lasting performance and protection.

FEATURES

Direct-fit replacement and upgrade for RWD E82/E88, E84, and E9X applications Solves intermittent grounding issues caused by aging OEM straps Clean, stealthy design that fits seamlessly in factory engine bays Factory length and lug orientation for drop-in fitment 2 AWG tinned copper cable for excellent conductivity and corrosion resistance Zinc-coated lugs, crimped and soldered to resist moisture and oxidation Black UL1015-grade insulation withstands oil, heat, and abrasion Discreet ECS label for a clean, OEM+ look Replaces OEM part number 12427549396.

Show More Show Less

New OEM Bosch Starter Motor - N52, N54, N55, up to 03/11
For vehicles with production date up to 03/2011
Bosch - Corporate Logo
T#:394329
Part#: SR0492N
In Stock
$ 255.99

This product was last offered at the strikethrough price on
03-17-2026

$ 237.99 USD
Free Shipping
$ 237.99 USD
Free Shipping

If your car won't turn over, there is a good chance your starter is shot. Bosch's OEM starter is a high quality replacement that will give you peace of mind thanks to its long life-span. OEM replacement for the original BMW part # 12411312104 and 12411312130. This is a NEW, not used, component with no included core charge!

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

We recommend replacing hardware when doing your starter, since the bolts are aluminum and threads become stretched: Genuine BMW aluminum starter hardware set 12410392577 

 

Used on a wide variety of models with the BMW N52, N54, and N55 engines, including: E9X, F01/02, F07/10, E8X, E70, E60/61, F25, F30, and Z4.

Show More Show Less
Motiv Motorsports - Corporate Logo
T#:29201081
Part#: 900.1008
In Stock
$ 200.00 USD
Free Shipping on orders $49 and up

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.

  • Direct Plug-N-Play Installation: Connects directly to the ReFlex+ Control Unit and your EV6/USCAR injectors.
  • Versatile Connector Options: Includes DTM 3-Pin and 2-Pin connectors for integration with ethanol content sensors and external sensors.
  • Multiple Sensor Connectors: Features connections for a 0-10 Bar Pressure Sensor and a 0-5v sensor.
  • Auxiliary Output Wires: Provides 3x unterminated wires for additional low-side triggers from the ReFlex+ Control Unit.
  • Easy Connection: DTM 8-Pin connector allows for straightforward setup with ReFlex+ Install Harnesses.

Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.

Show More Show Less

Motiv Motorsports - Corporate Logo
T#:29101684
Part#: 900.1001
In Stock
$ 729.00 USD
Free Shipping on orders $49 and up
The motive ReFlex+ Control Unit is an advanced I/O integration module that allows precise control of aftermarket components and sends data to the factory DME (ECU) via CANbus communication, expanding performance tuning capabilities. This control unit allows for precise control of fuel pumps, methanol injection kits, nitrous kits, boost controllers, relay triggers, port injection systems, flex fuel systems, and more. Supporting sequential port injection for up to eight injectors and real-time monitoring of injectors, this unit is a great choice for precise control of fuel delivery to your engine.
Show More Show Less

Motiv Motorsports - Corporate Logo
T#:29234298
Part#: 910.1011
In Stock
$ 479.00 USD
Free Shipping on orders $49 and up
The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-6 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.
Show More Show Less
URO - Corporate Logo
T#:36032311
Part#: 13628644433
In Stock
$ 71.99 USD
Free Shipping on orders $49 and up
$ 71.99 USD
Free Shipping on orders $49 and up
The MAP sensor, or manifold absolute pressure sensor, works with the engine computer to set the fuel curve and give readings to the engine computer. If yours is faulty, it may cause improper running, rich or lean fuel curves, or other general performance issues. Replace yours with this unit to keep your engine running at full potential. For N54 applications, you will need adapter harness T#583821- This TMAP sensor is typically used in high-boost applications for the N54
Show More Show Less
URO Positive Cable Battery Connection Pole
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:42436713
Part#: 61129217031
In Stock
$ 130.99 USD
Free Shipping on orders $49 and up
If your BMW has been in an accident and the Battery Safety Terminal (BST) has been triggered, you'll need a new positive battery cable connection to restore power and get the vehicle running again.


URO Power Distribution Box With Fuse - BMW E8X 1
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:49822552
Part#: 61146971370
Back Ordered
$ 91.99 USD
Free Shipping on orders $49 and up
Ensures the appropriate amount of power is sent to electrical vehicle components.
Motiv Motorsports - Corporate Logo
T#:29201083
Part#: 900.1016
Ships in 4 Business Days
$ 95.00 USD
Free Shipping on orders $49 and up
A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal
Show More Show Less
OMP - Corporate Logo
T#:1614
Part#: EA-462
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less

Bosch Starter Motor With Hardware
10X Entries Into Our F80 M3 Sweepstakes
Packaged by Turner - Corporate Logo
T#:56110332
Part#: SR0492NKT4
In Stock
New Item
$ 273.99

This product was last offered at the strikethrough price on
08-14-2026

$ 261.99 USD
Free Shipping on orders $49 and up
$ 261.99 USD
Free Shipping on orders $49 and up
At the core is a brand-new Bosch Starter Motor, engineered to withstand extreme operating conditions while delivering immediate cranking speed. This kit includes also the required Genuine BMW Aluminum Mounting Screw Set.
Show More Show Less

Bosch - Corporate Logo
T#:580223
Part#: AL9449X
Ships in 1 Business Day
$ 575.99 USD
Free Shipping
$ 575.99 USD
Free Shipping
Motiv Motorsports - Corporate Logo
T#:29101668
Part#: 910.1001
Ships in 4 Business Days
$ 849.00 USD
Free Shipping on orders $49 and up
The MOTIV ReFlex+ is an Advanced I/O Integration module allowing a level of precise control of auxiliary components. In addition, the ReFlex can incorporate external data into the factory DME/ECU in parallel through optional CANbus integration. Utilizing the CANbus option, multiple digital and analog signals can be used by the DME/ECU for safety, data logging, or adaptive tuning features. It is unique in its ability to function as a separate standalone, as well as a parallel module in conjunction with the DME/ECU. The ReFlex provides the most accurate and precise supplementary sequential fuel injection with the ability to control other advanced features all in one place. It brings a new level of control, function, and versatility to tuning any modern-day vehicle. Preset crank and cam trigger for most modern-day BMW engines, as well as fully configurable triggers to be synched on any vehicle application. Configurable to operate on 4, 5, 6, and 8-cylinder engines. 3 Point MAP sensor calibration table makes it configurable for almost any MAP or TMAP sensor. Sequential Port Injection with the ability to sense individual injector failures on 4 to 8-cylinder engines. Built-in Ethanol Content Analyzer. The Re|Flex firmware and XDFs include ethanol compensation tables to scale properly for varying ethanol % based on real-time input from the sensor. 2x Additional Outputs. These outputs have 12x12 resolution tables for control in TunerPro R/T. These can be configured to run as on/off, digital, frequency (25hz), or PID. Boost Control WGDC Methanol Solenoid Control PWM (for use with valves such as the Aquamist FAV and the ProMeth Pulse Valve) Nitrous Solenoid Control PWM Auxiliary fuel pump relay trigger 2x Inputs Ethanol Content Sensor Fuel Pressure Sensor (0-10bar) Oil Pressure (0-10bar) Coolant Pressure (0-10bar) EGBP/EMAP (0-10bar) CANbus (not required) enabled communication for the transmission and receiving of digital signals for fully DME/ECU integrated control of external modifications. The CANbus communications also allow for data and errors to be transmitted to and from the vehicle's engine control computer in order to add safeguards and implement engine trips and fail safes. Logging via OBDII is still fully functional and is not affected at all by the communication with the Re|Flex. Some of the developments underway include: Error reporting to and from factory ECU for unparalleled safety Output WGDC by converting an EWG signal to a more conventional DC output for controlling standard 3port and 4port boost solenoids for use with external WG’s The ability to datalog non-factory parameters such as ethanol content, additional pressure sensor, PI IDC, and more! These features make the Re|Flex the most powerful and safest supplementary and auxiliary controller on the market. However, this is only the beginning. As flash platforms find the need for more accessories to control, the Re|Flex was designed to be updated easily by the end user in order to add functionality as it is developed.
Show More Show Less

Motiv Motorsports - Corporate Logo
T#:29234303
Part#: 900.1012
Ships in 4 Business Days
$ 140.00 USD
Free Shipping on orders $49 and up
Required when installing a Motiv ReFlex Lite to your inline-4 powered BMW! Includes x4 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!
Motiv Motorsports - Corporate Logo
T#:29234311
Part#: 900.1013
Ships in 4 Business Days
$ 155.00 USD
Free Shipping on orders $49 and up
Required when installing a Motiv ReFlex Lite to your inline-6 powered BMW! Includes x6 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!

Bosch - Corporate Logo
T#:639189
Part#: 12417638195
Ships in 3 Business Days
$ 324.99

This product was last offered at the strikethrough price on
05-07-2026

$ 314.99 USD
Free Shipping
$ 314.99 USD
Free Shipping

OEM Bosch Remanufactured Starter -- N52 N54 N55 3.0L
For vehicles with production date up to 03/2011
Bosch - Corporate Logo
T#:377503
Part#: 12412344243KT1
In Stock
$ 244.00

This product was last offered at the strikethrough price on
08-24-2026

$ 229.00 USD
Free Shipping
$ 229.00 USD
Free Shipping

If your starter has died and your car will no longer turner over, Bosch's replacement unit is the perfect high quality replacement. OEM replacement for BMW part # 12412354701, 12412344243, and 12417526236.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Includes a $65 core charge.

Show More Show Less
Blower Motor Temperature Sensor - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:403094
Part#: 64116930015
Ships in 1 Business Day
$ 15.99 USD
Free Shipping on orders $49 and up
Part of the HVAC system
LK-2M 2 Pin Connector Package
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:40072446
Part#: LK2M
In Stock
Sale - Save 29% $ 6.99

This product was last offered at the strikethrough price on
06-14-2026

$ 4.94 USD
Free Shipping on orders $49 and up
Sale - Save 29%
$ 6.99

This product was last offered at the strikethrough price on
06-14-2026

$ 4.94 USD
Free Shipping on orders $49 and up

Includes connector housing with terminals and seals. Commonly used for the engine oil pressure switch.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Show More Show Less


Electrical Connector - Priced Each
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:367145
Part#: 61132359999
In Stock
$ 18.99 USD
Free Shipping on orders $49 and up
2 pin used in many locations on late model BMWs
3 Pin Connector
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:33412931
Part#: 12527519996
In Stock
Sale - Save 25% $ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD
Free Shipping on orders $49 and up

Includes connector housing with terminals and seals. Commonly used for the pencil-style ignition coil connector.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 12527519996 - Commonly used for the pencil-style ignition coil connector.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Show More Show Less
Motiv Motorsports - Corporate Logo
T#:29267513
Part#: 400.1001
Ships in 4 Business Days
$ 15.00 USD
Free Shipping on orders $49 and up

Oil Level Sensor
2X Entries Into Our F80 M3 Sweepstakes
URO - Corporate Logo
T#:8246791
Part#: 12617501786
Ships in 1 Business Day
$ 59.99 USD
Free Shipping on orders $49 and up
Replace your faulty sensor when the oil level light is on, but oils are at correct levels. Direct-fit OE replacement design restores factory oil level sensor function Easy plug-and-play connection Includes gasket
Show More Show Less

Bosch - Corporate Logo
T#:375327
Part#: 61131372626
In Stock at Vendor
$ 2.03 USD
Free Shipping on orders $49 and up
Vargas Turbo Technologies - Corporate Logo
T#:51672717
Part#: VTT-MAP-HARNESS
Ships in 10 Business Days
New Item
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
As part of the VTT-FAB fabrication line, this extension harness is designed for builders and tuners who need flexibility.

Bosch - Corporate Logo
T#:639688
Part#: 12418614519BKT
Ships on Sep 25, 2026
$ 441.99

This product was last offered at the strikethrough price on
05-08-2026

$ 431.99 USD
Free Shipping
$ 431.99 USD
Free Shipping
*Price includes a refundable $75 Core Charge* If your car won't turn over, there is a good chance your starter is shot. Bosch's OEM starter is a high-quality replacement that will give you peace of mind thanks to its long life-span. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products. As a leading source of high-performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less
2 Pin Connector
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:33412928
Part#: 12521427615
In Stock
Sale - Save 25% $ 7.99

This product was last offered at the strikethrough price on
06-14-2026

$ 5.99 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 7.99

This product was last offered at the strikethrough price on
06-14-2026

$ 5.99 USD
Free Shipping on orders $49 and up
Includes connector housing with terminals and seals. Commonly used for the engine oil pressure switch. ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need. Each connector includes an additional terminal in case one becomes lost or damaged during installation. *OEM cross reference PN# 12521427615 - Commonly used for the engine oil pressure switch. Please reference the original part number from the existing connector to confirm fitment, before ordering. Suggested tools: Suggested crimping pliers: T#387193 Wire De-pin tools: 12pc De-Pin Tool Set - T#386379 23pc De-Pin Tool Set - T#641943
Show More Show Less

2 Pin Connector
10X Entries Into Our F80 M3 Sweepstakes
ECS - Corporate Logo
T#:33412932
Part#: 61132359999
In Stock
Sale - Save 25% $ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD
Free Shipping on orders $49 and up
Sale - Save 25%
$ 10.99

This product was last offered at the strikethrough price on
06-14-2026

$ 8.24 USD
Free Shipping on orders $49 and up

Includes connector housing with terminals and seals. Commonly used for the coolant level sensor.

ECS Tuning replacement harness connectors include all necessary pins and wire seals for a complete harness repair. Whether you have a broken harness connector or need a complete wiring repair, we have the components you need.

Each connector includes an additional terminal in case one becomes lost or damaged during installation.

*OEM cross reference PN# 61132359999 - Commonly used for the coolant level sensor.

Please reference the original part number from the existing connector to confirm fitment, before ordering.

Suggested tools:

Suggested crimping pliers: T#387193
Wire De-pin tools:
12pc De-Pin Tool Set - T#386379
23pc De-Pin Tool Set - T#641943

Show More Show Less

Febi - Corporate Logo
T#:47644907
Part#: 13627593624
Special Order: No Guaranteed ETA
$ 214.99 USD
$ 214.99 USD
Febi - Corporate Logo
T#:56254775
Part#: 13627582842
Special Order: No Guaranteed ETA
New Item
$ 19.99 USD
Free Shipping on orders $49 and up
This Febi Crankshaft Position Sensor ensures your ECU receives ultra-fast, precise engine speed and position data under all driving conditions.
Febi - Corporate Logo
T#:56544032
Part#: 12412354701
Special Order: No Guaranteed ETA
New Item
$ 146.99 USD
Free Shipping on orders $49 and up
Built by Febi Bilstein, this complete assembly ensures seamless integration into your vehicle’s electrical and flywheel system.


Motiv Motorsports - Corporate Logo
T#:29234292
Part#: 910.1010
Back Ordered
$ 469.00 USD
Free Shipping on orders $49 and up
The ReFlex LITE is a simple yet elegant fueling solution for direct injected vehicles that need to add more fuel by installing a port injection system to keep up with their modifications to the vehicle. Using the same precise form of sequential fuel injection as the ReFlex+, the ReFlex LITE brings a more affordable fuel controller without the additional features of the ReFlex+. Sequential port fuel injection for inline-4 engines Firmware and maps are available for multiple vehicles FREE on our website High resolution calibration tables 24x24 cell RPM vs MAP 0-48psi MAP pressure range 250RPM increments up to 8500RPM High resolution datalogging Fault detection status available to monitor in TunerPRO RT Compact in size Universal fitment Simple installation Please Note: The ReFlex LITE does NOT have the ability to analyze and transmit ethanol content to an ECU.
Show More Show Less
Febi - Corporate Logo
T#:54816234
Part#: 1000540
Special Order: No Guaranteed ETA
New Item
$ 116.99

This product was last offered at the strikethrough price on
06-10-2026

$ 89.00 USD
Free Shipping on orders $49 and up
$ 89.00 USD
Free Shipping on orders $49 and up
When BMW threw out the mechanical dipstick, they shifted the responsibility of protecting your engine entirely to the electronic oil level sensor. On the street or the track, knowing your oil level is non-negotiable. If your dashboard sensor readout is throwing errors or lagging, your N52, N54, N55, S55, or N63 engine is operating in the dark. This Febi Bilstein engine oil level sensor is an excellent, cost-effective alternative to expensive dealership parts counter pieces. Febi is an industry-trusted German manufacturer, ensuring this sensor reads with the exact same precision and calibration as original equipment. Keep your ultimate driving machine properly monitored and safe from oil starvation. Key Features Premium German Engineering: Manufactured by Febi Bilstein to match original BMW operational tolerances. Critical Engine Protection: Restores accurate iDrive/instrument cluster oil volume and temperature readouts. Exact Factory Fit: Features the correct 3-pin oval plug orientation for a seamless plug-and-play install. Track-Day Insurance: Ensures your electronic monitoring system functions flawlessly under heavy load. Turner Tip: Oil level sensors are notorious for failing due to age and repeated heat cycles. Because this sensor installs directly into the bottom of the oil pan, make this swap part of your next oil service kit checklist.
Show More Show Less