BMW Engine Parts for BMW X Series E84 (2013-2015)

Clear BMW chassis

Please ensure your correct model is selected

Turner Motorsport has everything you need to upgrade your BMW through our stages of performance or to keep your car in peak condition with our range of the latest in proven OEM cooling parts. Upgrade your cooling system and engine performance with the selections below to give your BMW a performance and reliability advantage.

Sub-Categories

Sort By:

Dinan N-Series Performance Ignition Coil - Blue - BMW M54 S54 N20 N26...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:4908030
Part#: D650-0004
In Stock
10% off MSRP $ 38.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD
Free Shipping
10% off MSRP
$ 38.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 34.99 USD
Free Shipping
Dinan Ignition Coils are designed to be a direct plug-and-play replacement, or upgrade, to factory coils and provide greater energy output. With up to 10% more energy output than stock, you are ensured a stronger and more consistent spark. Whether you are replacing dilapidated coils that are causing sluggish acceleration and/or misfires or simply upgrading for a more reliable and consistent spark your ignition system will be more efficient with a new set of Dinan coils. For those that like to showcase engine modifications they even come in a variety of unique housing colors to choose from for that personalized touch!
Show More Show Less
Dinan Iridium Spark Plug - N20 N54 N55 S55 N63 N63TU S63 S63TU ...
2-Steps Colder than OE plugs - For tuned, high boost, and/or upgraded turbo application...
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:40579789
Part#: D640-0002
In Stock
8% off MSRP $ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD
Free Shipping
8% off MSRP
$ 23.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 21.99 USD
Free Shipping
Dinan Iridium Spark Plugs are an excellent upgrade for tuned, and even stock engines, where applicable.* Our spark plugs are made from Iridium - one of the strongest materials available. They last longer than other materials with higher melting points, run cooler, resist preignition, and even require less voltage to produce a strong spark. The iridium electrode with its copper core is harder and stronger than other materials, can dissipate heat more easily, and is better protected from melting, cracking, and other limitations found with standard plugs. Dinan spark plugs are great for high boost, high cylinder pressure, high cylinder temperatures, and high-power situations, and they pair nicely with a set of Dinan ignition coils, where applicable. However, they are not only for tuned and higher output vehicles that may benefit from a plug cooler than the factory heat range – they also are applicable to select non-tuned / stock vehicles as well!* *N54 & N55 COMPATIBILITY: Dinan plugs are numerous steps colder than stock on both the N54 (3 steps colder) and N55 (2 steps colder) and are suggested for tuned, high boost and/or upgraded turbo applications only. They are *NOT* suggested for non-tuned stock vehicles for these speciific applications. If installed on a stock N54/N55 vehicle the plug will not reach its self cleaning temperature and be unable to burn off the combustion deposits leading to fouling, misfires, and a shorter lifespan of the plug.
Show More Show Less
VTT S55 Crank Bolt Capture - F8X S55 F3x N55
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:557934
Part#: VTT-S55-CBC
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping
The S55 suffers from a weak point in its crankshaft. It has been reported that when increasing the power to the engine, the crank hub can move or spin slightly under an extreme load.

Bav Auto VANOS Solenoid - BMW N55 N63 S63
10X Entries Into Our F80 M3 Sweepstakes
Bavarian Autosport - Corporate Logo
T#:640209
Part#: 11368605123
In Stock
Sale - Save 20% $ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.99 USD
Free Shipping
Sale - Save 20%
$ 124.99

This product was last offered at the strikethrough price on
05-03-2026

$ 99.99 USD
Free Shipping
If your VANOS solenoid has failed, you could experience a poor running condition as well as a loss of power. Two required per car.

OEM Bosch Fuel Injector - EU6 Designation - N20/26 N55
For vehicles with production date from 07/2013 For vehicles with production date from 07/2012
Bosch - Corporate Logo
T#:585581
Part#: 13648625397
In Stock
$ 133.99

This product was last offered at the strikethrough price on
06-22-2026

$ 109.99 USD
Free Shipping
$ 109.99 USD
Free Shipping
Replace your clogged or malfunctioning fuel injector with this Genuine BMW injector to restore proper engine idling and running conditions. Ensure that you need injector with EU6 designation before purchase. This fuel injector will not work with earlier EU5 version fuel rails and injector; non-exchangeable Replaces Genuine BMW part # 13648625397 and requires BMW part # 13537577649 for installation.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:558084
Part#: VTT-CRANK-BREATH
In Stock
$ 129.99 USD
Free Shipping
$ 129.99 USD
Free Shipping

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve 

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
 ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Show More Show Less

OEM Bosch Fuel Injector - N55 N20 Engine - EU5 Designation
For vehicles with production date up to 07/2012
Bosch - Corporate Logo
T#:384546
Part#: 13647597870
In Stock
$ 165.99

This product was last offered at the strikethrough price on
05-11-2026

$ 132.99 USD
Free Shipping
$ 132.99 USD
Free Shipping
Replace your clogged or malfunctioning fuel injector with this Genuine BMW injector to restore proper engine idling and running conditions. Ensure that you need injector with EU5 designation before purchase. This fuel injector will not work with later EU6 version fuel rails and injector; non-exchangeable. Replaces Genuine BMW part # 13647597870 and requires BMW part # 13537577649 for installation.
Show More Show Less
Vargas N54/55 Billet Crank Seal Guard - BMW N54 N55 3.0L
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:638889
Part#: VTT-CRANKGUARD
In Stock
Starting at $ 89.99 USD
Free Shipping
Starting at $ 89.99 USD
Free Shipping
It is a well-known issue on the BMW N54/55 platforms that your serpentine belt can fail for various reasons. When this happens, there is a high chance of the belt getting sucked behind the front damper pulley and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure. Even if you do not lose the engine, it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT, even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Vargas' seal is different from those already on market in two major ways. Firstly, it is not offensively priced. Secondly, it is 100% billet with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long-term corrosion resistance. Crank Seal Guard includes: One VTT Billet N54/55 Crank Seal Guard Two extended 12.9 Grade bolts, and two stainless washers We highly recommend you install WITH a crank bolt capture at the same time, as you have to remove the damper anyway. Then you will get the benefit of helping eliminate the dreaded spun crank hub and the crank seal issue
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:558795
Part#: VTT-CRANKHUB-1
In Stock
$ 889.99 USD
Free Shipping
$ 889.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less

Dinan Performance Ignition Service Kit
Call In Or Chat For Best Price! 10X Entries Into Our F80 M3 Sweepstakes
Dinan - Corporate Logo
T#:8294102
Part#: D650-0004KT5
In Stock
$ 217.99 USD
Free Shipping
$ 217.99 USD
Free Shipping

Failing ignition coils or plugs can cause sputtering, rough idle, hesitation on acceleration, misfires, and a check engine light.

If one of your ignition coils is bad, it is a good idea to replace the plugs to prevent future problems. Great for fixing those rusted / corroded connections.

Great for modified or Tuned cars

The kit includes:

  • 4 Blue Dinan Coils with locks
  • 4 NGK spark plugs
  • 1 packet of American Grease Stick dielectric grease

These Dinan ignition coils feature:

  • Direct plug-and-play.
  • Up to 10% more energy output than stock.
  • Blue housing with Dinan Logo.
  • True upgrade, not just aesthetic.
Show More Show Less
New OEM Bosch Starter Motor - N52, N54, N55, up to 03/11
For vehicles with production date up to 03/2011
Bosch - Corporate Logo
T#:394329
Part#: SR0492N
In Stock
$ 255.99

This product was last offered at the strikethrough price on
03-17-2026

$ 237.99 USD
Free Shipping
$ 237.99 USD
Free Shipping

If your car won't turn over, there is a good chance your starter is shot. Bosch's OEM starter is a high quality replacement that will give you peace of mind thanks to its long life-span. OEM replacement for the original BMW part # 12411312104 and 12411312130. This is a NEW, not used, component with no included core charge!

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

We recommend replacing hardware when doing your starter, since the bolts are aluminum and threads become stretched: Genuine BMW aluminum starter hardware set 12410392577 

 

Used on a wide variety of models with the BMW N52, N54, and N55 engines, including: E9X, F01/02, F07/10, E8X, E70, E60/61, F25, F30, and Z4.

Show More Show Less
OEM Bosch Fuel Injector - EU5 Designation - E70/71 E82/88 E9X F07/10,...
For vehicles with EU5 injectors and a production date up 01/2011
Bosch - Corporate Logo
T#:585575
Part#: 13537568607
In Stock
$ 185.99

This product was last offered at the strikethrough price on
04-21-2026

$ 119.99 USD
Free Shipping
$ 119.99 USD
Free Shipping
Rough idle, misfire, or check engine light are a common problem when you have faulty fuel injectors. Fuel injectors for turbocharged BMWs have been a common failure item. Replace your injectors with this brand new injector from BMW to restore power and proper engine operation. EU5 Designation This is a replacement for Genuine BMW part # 13537568607. Requires BMW part # 13537577649 as well prior to installation for each injector.
Show More Show Less


OEM Bosch High-Pressure Fuel Pump & Fuel Filter - N55 3.0L
For vehicles with a production date from 03/2014 - Also fits models up to 03/2014 with ...
Bosch - Corporate Logo
T#:568683
Part#: 13518604231
In Stock
$ 311.99 USD
Free Shipping
$ 311.99 USD
Free Shipping
This is Bosch's updated high pressure fuel pump "HPFP" for BMW's with the N55 turbo engine. This fuel pump is the OEM equivalent to BMW part number 13518604231 and supersedes BMW part number 13517610761. Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products. As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts. All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!
Show More Show Less
B58 Ignition Coil Upgrade Adapter Kit - N55/S55
Not forsale in the state of California!
Nexsys Motorsport - Corporate Logo
T#:6811828
Part#: ICU-NS55-N5-PL
Ships in 4 Business Days
$ 299.99 USD
Free Shipping
$ 299.99 USD
Free Shipping
Does not include ignition coils. To mount the B58 coils onto the N55 & S55 engine the folks at Nexsys developed billet aluminum brackets that are Made in the USA.
Vargas Turbo Technologies - Corporate Logo
T#:18733532
Part#: VTT-CRANKHUB-6
Ships in 1 Business Day
$ 986.99

This product was last offered at the strikethrough price on
06-28-2026

$ 939.99 USD
Free Shipping
$ 939.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less

Vargas Ignition Coil Kit (Blue) - N5x
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:5309605
Part#: VTT-COIL-N5X-BLU
In Stock
$ 169.99 USD
Free Shipping
$ 169.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less

Vargas Ignition Coil Kit (Red) - N5x
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:5309610
Part#: VTT-COIL-N5X-RED
In Stock
$ 169.99 USD
Free Shipping
$ 169.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
Bosch - Corporate Logo
T#:384615
Part#: 11787589121
In Stock
$ 197.99

This product was last offered at the strikethrough price on
05-07-2026

$ 147.99 USD
Free Shipping
$ 147.99 USD
Free Shipping
Fuel control and emissions sensor

B58 Ignition Coil Upgrade Adapter Kit - N55
Not for sale in the state of California!
Nexsys Motorsport - Corporate Logo
T#:6811852
Part#: B58COILPNPN55
Ships in 4 Business Days
Sale - Save 7% $ 515.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 479.93 USD
Free Shipping
Sale - Save 7%
$ 515.99

This product was last offered at the strikethrough price on
05-03-2026

Starting at $ 479.93 USD
Free Shipping
B58 coils are capable of producing 2.3x the energy output while providing a longer spark duration than the Precision Raceworks N55 coils.
Bosch - Corporate Logo
T#:397340
Part#: 11787596924
In Stock
$ 163.84

This product was last offered at the strikethrough price on
05-19-2026

$ 162.15 USD
Free Shipping
$ 162.15 USD
Free Shipping

The oxygen sensor is vital to the performance and drivability of your car. The engine computer relies on data from the sensor to make adjustments in engine efficiency and performance. When your BMW oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing -- resulting in poor performance, poor gas mileage, and increased pollution. Make sure your BMW engine performs as it should, and doesn't use more fuel than it needs to, by simply changing your oxygen sensor today. There is no lifespan on O2 sensors but there are several fault codes that indicate a failed sensor (O2 monitoring, cat efficiency, O2 heating circuit, O2 readiness, and others). The O2 sensor is heated and has a self-calibration feature so once you get the codes or feel performance has suffered, a new sensor is a good starting point to get you back to peak performance. Bosch's Oxygen sensors are high quality and will give you the the longest and best performance for the price.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

This item fits the following BMW Chassis:
E82,E90,E92,E93,F30,F34

Fits BMW Engines including:
N55 - Up to 08/2013

Show More Show Less

Single Injector Replacement Kit
For vehicles with production date up to 07/2012
Bosch - Corporate Logo
T#:590987
Part#: 13647597870SKT
In Stock
$ 194.49

This product was last offered at the strikethrough price on
05-11-2026

$ 162.14 USD
Free Shipping
$ 162.14 USD
Free Shipping

Vargas Turbo Technologies - Corporate Logo
T#:18733531
Part#: VTT-CRANKHUB-5
Ships in 10 Business Days
$ 880.99 USD
Free Shipping
$ 880.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution.
Show More Show Less
Bosch - Corporate Logo
T#:384616
Part#: 11787589122
In Stock
$ 168.99

This product was last offered at the strikethrough price on
05-07-2026

$ 111.99 USD
Free Shipping
$ 111.99 USD
Free Shipping

A new oxygen sensor can improve driveability and lengthen engine life. Ultimately, you achieve a smoother running engine that is more fuel efficient. Feedback from the oxygen sensor provides closed-loop control of the injected quantity of fuel for optimum air-fuel mixture, enabling virtually complete combustion to take place. Contaminants in gas and certain atmospheric conditions can drastically shorten the life of any oxygen sensor, therefore they should be checked with every periodic maintenance and changed if necessary.

This is the OEM Bosch oxygen sensor for BMW's with the N20 and N26 motors. This sensor is mounted in the catalytic converter in the rear most position. OEM replacement for BMW # 11787589122.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Fits the following BMWs:
All models with the N20 or N26 motor

Show More Show Less
Bosch - Corporate Logo
T#:590992
Part#: 13648625397SKT
In Stock
$ 162.99

This product was last offered at the strikethrough price on
06-22-2026

$ 139.99 USD
Free Shipping
$ 139.99 USD
Free Shipping

BMW N20 N55 Single Injector Replacement Kit is an essential upgrade for maintaining optimal engine performance. Designed to replace faulty injectors and ensure smooth operation, this kit from Turner Motorsport offers a reliable solution for BMW vehicles. It’s crucial to visually inspect the numbers on your existing injectors to confirm proper fitment before installation.

  • Comprehensive Kit: Includes 1 EU-6 injector, 1 decoupling ring, and 1 gasket ring for a complete replacement.
  • Enhanced Performance: Replaces malfunctioning injectors to restore engine efficiency and drivability.
  • Easy Installation: Designed for straightforward installation with included components.
  • Quality Assurance: Turner Motorsport provides high-quality parts to ensure durability and long-lasting performance.

Turner Motorsport’s BMW N20 N55 Single Injector Replacement Kit helps maintain engine performance and reliability by providing essential components for injector replacement.

Show More Show Less


Vargas Turbo Technologies - Corporate Logo
T#:5122266
Part#: VTTFILTERCAPCLR
Ships in 1 Business Day
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122267
Part#: VTTFILTERCAPBLUE
Ships in 6 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:51813315
Part#: VTT-TI-DRAIN
Ships in 7 Business Days
New Item
$ 31.99 USD
Free Shipping
$ 31.99 USD
Free Shipping
The VTT Burnt Titanium Magnetic Oil Drain Plug is a critical upgrade for any performance enthusiast looking to maximize engine longevity.

Spool Performance - Corporate Logo
T#:9642131
Part#: SP-54HX-1-N55
Ships in 5 Business Days
$ 849.00 USD
Free Shipping
$ 849.00 USD
Free Shipping
Spool Performance is a top name in the BMW Forced Induction industry. Their team of young and intelligent engineers pair their passion for the industry with a rich education background, which results in a high-quality enthusiast-minded products. Spool Performance's state-of-the-art upgrades for your BMW fueling systems are a surefire way to make more power, reliably. The Helix from Spool is simply a planetary gearbox for your High-pressure fuel pump. The particular configuration of the gears and their spatial fixturing allows an axial increase in shaft speed from the input to the output of the unit. The early N55 high-pressure pump is a very capable and over-engineered piece of hardware. As we start tuning and pushing more power, we start seeing drops in the high pressure. What is happening here is that the high-pressure pump is not able pump as much fuel as the injectors are injecting into the cylinders and hence causing the rail pressures to drop. The pump at this point is running out of displacement volume. With a rotary pump like the continental HPFP, an easier way to increase displacement is to spin the pump faster which results in an increased number of delivery strokes per cycle. The Helix helps you do exactly this and thus helps overcome a big limitation in early N55 fuel systems without the complexity of a secondary port injection system.
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:5122280
Part#: TRIPLECAPRED1
Ships in 10 Business Days
$ 209.99 USD
Free Shipping
$ 209.99 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122264
Part#: VTTFILTERCAPBLK
Ships in 10 Business Days
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less

Vargas Ignition Coil Kit (Black) - N5x
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:5309609
Part#: VTT-COIL-N5X-BLK
Ships in 10 Business Days
$ 167.99 USD
Free Shipping
$ 167.99 USD
Free Shipping
Vargas has contacted multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once satisfied with the testing, the best performing coils were made to various colors and specs. Vargas is proud to offer a new line of ignition coil replacements for N5x Engines. VTT N5X coils are tested against Delphi 10571 coils which are an upgrade over stock N5X factory coils. The VTT performance matches or exceeds a Delphi 10571 Coil. The coils are offered in a choice of black, red, and blue.
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122265
Part#: VTTFILTERCAPRED
In Stock
$ 89.99 USD
Free Shipping
$ 89.99 USD
Free Shipping
VTT is proud to offer a billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap and the need for a special tool for removal, while adding some pop and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. Vargas Turbo designed these caps to complement their N5X Billet Oil caps and N5X Billet Power Steering caps so that all 3 will have the same design. The caps are offered in 4 colors – Red, Black, Blue, and Clear anodized
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:5122281
Part#: TRIPLECAPCLR1
Ships in 10 Business Days
$ 249.99 USD
Free Shipping
$ 249.99 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less

Ignition Projects - Corporate Logo
T#:1637692
Part#: IP-A122409
Ships in 5 Business Days
$ 695.00 USD
Free Shipping
$ 695.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less
Vargas Turbo Technologies - Corporate Logo
T#:5122279
Part#: TRIPLECAPBLK1
Ships in 10 Business Days
$ 220.99 USD
Free Shipping
$ 220.99 USD
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less
Ignition Projects - Corporate Logo
T#:1637696
Part#: IP-A122609
Ships in 5 Business Days
$ 1,055.00 USD
Free Shipping
$ 1,055.00 USD
Free Shipping
Ignition Projects is a Southern California based company that specializes in innovative ignitions products. Their mission is to develop stronger ignition systems in order to optimize engine performance and improve emmissions/consumption. All of their products are developed and manufactured here in Tustin, CA, right here in the US!
Show More Show Less


Spline Lock Crank Hub Solution
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:8061334
Part#: VTT-N55-CRANKHUB
Ships in 10 Business Days
$ 818.99 USD
Free Shipping
$ 818.99 USD
Free Shipping
Under certain conditions, the N55 crank hub likes to spin, without warning and even when the engine is in perfect health. The engineers at Vargas saw and dealt with this problem time and again, and they saw fit to do something about it. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. This hub uses a proprietary "Spline Lock" technology that uses high tolerance machined splines which press into the crank, and positively lock the hub to the crank. The splines are machined in such a way that rotational forces drive the hub, and splines deeper into the crank meaning when the hub encounters a situation that would normally slip a stock hub the splined hub is driven into the crank to keep it in place (much like a splined extractor). Features: Installs the same as a stock hub Does NOT require the crank to be drilled for pins Manufactured from Harndered 17-4SS We suggest the Crank Hub System ONLY be installed by a qualified shop or technician. Timing tools are 100% REQUIRED if installed improperly engine damage may occur. DISCLAIMER: VTT and ECS are not responsible for any engine damage caused by improper installation, or misuse of the crank hub solution. The product comes with a 1-year unlimited mileage warranty from manufacturer defects.
Show More Show Less
Bosch - Corporate Logo
T#:580223
Part#: AL9449X
Ships in 1 Business Day
$ 575.99 USD
Free Shipping
$ 575.99 USD
Free Shipping
Bosch - Corporate Logo
T#:639092
Part#: 13517584461
In Stock
$ 459.99

This product was last offered at the strikethrough price on
05-07-2026

$ 406.99 USD
Free Shipping
$ 406.99 USD
Free Shipping
This is the high-pressure fuel pump for BMW's with the N20 turbo engine. Bosch High-Pressure Pump - This item fits the following BMW Chassis: E89 Z4,F10,F22,F25 X3,F26 X4,F30,F31,F32,F33,F34,F36 Fits BMW Engines including: N20,N26
Show More Show Less

Vargas Turbo Technologies - Corporate Logo
T#:52270240
Part#: GARROUTT4G4045
Ships in 10 Business Days
New Item
$ 37.99 USD
Free Shipping
$ 37.99 USD
Free Shipping
Upgrade your turbocharger exhaust connection with the VTT-FAB 86mm V-Band Outlet Flange, designed for the Garrett G40-G45 frame sizes.

Bosch - Corporate Logo
T#:639189
Part#: 12417638195
Ships in 3 Business Days
$ 324.99

This product was last offered at the strikethrough price on
05-07-2026

$ 314.99 USD
Free Shipping
$ 314.99 USD
Free Shipping
Vargas Turbo Technologies - Corporate Logo
T#:5122282
Part#: TRIPLECAPBLUE1
In Stock
$ 251.99

This product was last offered at the strikethrough price on
08-12-2026

$ 226.99 USD
Limited Qty Sale
Free Shipping
$ 251.99

This product was last offered at the strikethrough price on
08-12-2026

$ 226.99 USD
Limited Qty Sale
Free Shipping
Save 10% by buying all 3 VTT Billet Caps together! VTT is proud to offer their billet replacement for the factory plastic Power Steering Cap, Oil Filter Housing Cap, and Oil Fill Cap. These caps do away with the weak plastic construction while adding some pop and color to your engine bay. These caps retain ALL of the factory provisions to ensure proper fitment and operation. Vargas Turbo designed these caps to complement each other, so all 3 will have the same design and color shades. These caps come in 4 colors – Red, Black, Blue, and Clear anodized.
Show More Show Less

Vargas Titanium Valve Cover Hardware Upgrade - Black - BMW B58, N55, ...
For vehicles with VTT Valve Cover
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:52129732
Part#: VTT-TI-BOLTS-2-B
Back Ordered
New Item
$ 59.99 USD
Free Shipping
$ 59.99 USD
Free Shipping
The VTT Titanium Valve Cover Hardware Kit is the ultimate finishing touch for your BMW N55, S55, or B58 engine.
CP Carrillo - Corporate Logo
T#:25042509
Part#: SCR9101-4
Back Ordered
$ 1,230.99 USD
Free Shipping
$ 1,230.99 USD
Free Shipping
Carrillo rods are your number one option for performance connecting rods! If you are looking to upgrade your N20 engine to handle greater power, we highly recommend these Pro-H connecting rods. Upgrading connecting rods in your engine can bring several benefits, particularly if you're looking to enhance performance, reliability, and overall durability. Here are some reasons why you might consider investing in upgraded connecting rods: Increased Strength: Upgraded connecting rods are often made from stronger materials, such as forged steel or titanium, compared to stock rods. This increased strength helps withstand higher levels of stress and load, making them suitable for high-performance applications. Improved Durability: Enhanced materials and manufacturing processes contribute to improved durability, reducing the risk of connecting rod failure, especially in high-stress situations. This is crucial for engines that undergo frequent high-speed or high-stress conditions, such as in racing or heavy-duty applications. Higher RPM Capability: Upgraded connecting rods are designed to handle higher engine RPM (revolutions per minute) without succumbing to fatigue or deformation. This is beneficial for those seeking increased horsepower and torque at higher engine speeds. Reduced Weight: Some upgraded connecting rods are engineered to be lighter while maintaining strength, contributing to a lower overall rotating mass in the engine. This can result in quicker revving, improved throttle response, and better overall performance. Enhanced Precision: Upgraded rods often undergo more precise machining processes, ensuring tight tolerances and improved balance. This precision can lead to better engine stability and reduced vibration, ultimately extending the life of engine components. Compatibility with High-Performance Builds: If you're planning on modifying your engine for increased horsepower through methods like turbocharging or supercharging, upgraded connecting rods become essential. They provide the necessary strength and reliability to handle the increased stresses associated with forced induction. Prevention of Catastrophic Failures: Upgrading connecting rods can act as a preventive measure against catastrophic engine failures. The improved strength and durability reduce the risk of a connecting rod breaking, which could lead to severe engine damage. Specifications: CC(in): 5.683 CC(mm): 144.35 Style: PRO-H Bolt Size: 3/8 Bolt Type: WMC Pin Width(in): 0.822 Pin Width(mm): 20.88 Big Width(in): 0.822 Bid Width(mm): 20.88 Big Bore(in): 2.1112 Big Bore(mm): 53.62 Pin Size: 22mm QTY: Set of 4 Founded by Fred Carrillo in 1963, Carrillo Connecting Rods was established with an unwavering commitment to uncompromising standards in manufacturing. Fred recognized that the relentless pursuit of speed demanded an equally fervent dedication to the quality of components. This foundational philosophy remains as strong today as it was at the inception of Carrillo in 1963. At CP-Carrillo, quality and pride are inseparable. The process of crafting a CP-Carrillo rod transcends mere forging, production targets, and shipping deadlines. The evolution of connecting rod design has become a collaborative effort involving skilled specialists. Each connecting rod is a precision symphony, with material specialists, forging experts, production craftsmen, design engineers, and engine specialists contributing their expertise and artistry. Customer feedback plays a pivotal role in our continuous product improvement. The close interaction between customers, engineering, and manufacturing fosters the most effective rod designs, enhancing accuracy and service—a value that becomes apparent during your engine build. CP-Carrillo's dimensional integrity stands unparalleled, setting a standard of excellence in the industry.
Show More Show Less

OEM Bosch Remanufactured Starter -- N52 N54 N55 3.0L
For vehicles with production date up to 03/2011
Bosch - Corporate Logo
T#:377503
Part#: 12412344243KT1
In Stock
$ 245.99

This product was last offered at the strikethrough price on
03-03-2026

$ 229.00 USD
Free Shipping
$ 229.00 USD
Free Shipping

If your starter has died and your car will no longer turner over, Bosch's replacement unit is the perfect high quality replacement. OEM replacement for BMW part # 12412354701, 12412344243, and 12417526236.

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Includes a $65 core charge.

Show More Show Less

Vargas Billet Motor Mount Inserts - BMW N20/N54/N55
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51918860
Part#: VTT-INSERT-4
Ships in 10 Business Days
New Item
$ 434.99 USD
Free Shipping
$ 434.99 USD
Free Shipping
The VTT Billet Motor Mount Insert Kit is for BMW N20/N54/N55 owners who want to eliminate the excessive engine pitch and drivetrain slop.
Vargas Turbo Technologies - Corporate Logo
T#:52094551
Part#: VTT-DCS-EWG-ONLY
Ships in 10 Business Days
New Item
$ 839.99 USD
Free Shipping
$ 839.99 USD
Free Shipping
The Universal DCS System is the ultimate boost control solution for any vehicle, regardless of whether it came with factory electronic wastegate control.
Vargas Turbo Technologies - Corporate Logo
T#:51672701
Part#: VTT-EXTENDED-STU
Ships in 10 Business Days
New Item
$ 3.99 USD
Free Shipping
$ 3.99 USD
Free Shipping
The VTT-FAB Extended M7 Studs are the professional’s choice for securing thick-flange manifolds on N54, N55, S55, and B58 engines.


Vargas "Spline Lock" Crank Hub Solution - BMW N55 & S55
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51918889
Part#: VTT-NS55CHSCP
Ships in 10 Business Days
New Item
$ 889.99 USD
Free Shipping
$ 889.99 USD
Free Shipping
The VTT Spline Lock Crank Hub Solution represents a massive leap in drivetrain engineering by moving away from friction-based or pinned interfaces.
Vargas "Spine Lock" Crank Hub - BMW N55/S55
2X Entries Into Our F80 M3 Sweepstakes
Vargas Turbo Technologies - Corporate Logo
T#:51918887
Part#: VTT-NS55CHO
Ships in 10 Business Days
New Item
$ 819.99 USD
Free Shipping
$ 819.99 USD
Free Shipping
The Vargas Spline Lock Crank Hub is the solution for BMW owners seeking to push their N55 or S55 engines to the limit without the fear of catastrophic timing failure.