Select Vehicle
BMW
Mini
Create an account to be able to build Wish Lists.
Please ensure your correct model is selected
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
If you're experiencing hard starting, flaky charging, or other electrical issues, your engine ground strap may be the culprit. On E9X BMWs, the engine ground strap is a thin, non-insulated cable that spans from the left engine mount arm to the frame horn. Despite the seemingly simple nature of this part, on older cars, it is known to cause massive headaches. Due to its non-insulated design, years of exposure to water, dirt, and road salt will cause the wire to corrode, ultimately leading to complete failure. A break in this cable will cause an open circuit, resulting in issues with the vehicle's electrical system and potentially leading to a no-start condition.
To solve this issue, ECS has engineered an exact-fit, upgraded ground strap for your E9X BMW! Unlike its OEM counterpart, this design features insulated, large-gauge copper wire for dependable conductivity and long-lasting durability. Additionally, factory-style lugs are zinc-coated, crimped, and soldered, ensuring protection against corrosion and oxidation.
Whether you're replacing a visibly corroded strap or proactively preventing failure, this solution from ECS is sure to provide lasting performance and protection.
FEATURES
Direct-fit replacement and upgrade for RWD E82/E88, E84, and E9X applications Solves intermittent grounding issues caused by aging OEM straps Clean, stealthy design that fits seamlessly in factory engine bays Factory length and lug orientation for drop-in fitment 2 AWG tinned copper cable for excellent conductivity and corrosion resistance Zinc-coated lugs, crimped and soldered to resist moisture and oxidation Black UL1015-grade insulation withstands oil, heat, and abrasion Discreet ECS label for a clean, OEM+ look Replaces OEM part numbers 12427549393, 12427795404, and 12427790559.
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-13-2026
This product was last offered at the strikethrough price on
06-14-2026
This product was last offered at the strikethrough price on
06-14-2026
If you're experiencing hard starting, flaky charging, or other electrical issues, your engine ground strap may be the culprit. On E9X BMWs, the engine ground strap is a thin, non-insulated cable that spans from the left engine mount arm to the frame horn. Despite the seemingly simple nature of this part, on older cars, it is known to cause massive headaches. Due to its non-insulated design, years of exposure to water, dirt, and road salt will cause the wire to corrode, ultimately leading to complete failure. A break in this cable will cause an open circuit, resulting in issues with the vehicle's electrical system and potentially leading to a no-start condition.
To solve this issue, ECS has engineered an exact-fit, upgraded ground strap for your E9X BMW! Unlike its OEM counterpart, this design features insulated, large-gauge copper wire for dependable conductivity and long-lasting durability. Additionally, factory-style lugs are zinc-coated, crimped, and soldered, ensuring protection against corrosion and oxidation.
Whether you're replacing a visibly corroded strap or proactively preventing failure, this solution from ECS is sure to provide lasting performance and protection.
FEATURES
Direct-fit replacement and upgrade for RWD E82/E88, E84, and E9X applications Solves intermittent grounding issues caused by aging OEM straps Clean, stealthy design that fits seamlessly in factory engine bays Factory length and lug orientation for drop-in fitment 2 AWG tinned copper cable for excellent conductivity and corrosion resistance Zinc-coated lugs, crimped and soldered to resist moisture and oxidation Black UL1015-grade insulation withstands oil, heat, and abrasion Discreet ECS label for a clean, OEM+ look Replaces OEM part number 12427549396.
Featuring silver fine wire center electrode - Superior ignition ability increases engine power!
Although these come pre-gapped we highly recommend double checking the plug gap upon receiving them and adjusting to your vehicle's individual needs.
For the N55/S55, these plugs are 2 Steps Colder, while for the N54 they are 3 Steps Colder.
Note that BMW Spark plugs require a special 12 point 14mm thin walled socket. We have several options available in our catalog that will help you get your spark plugs changed. The BMW part number for the tool is 83300495560, but we recommend the Schwaben brand T#373727 that won't cost you an arm and a leg.
Brisk Silver Racing Spark Plugs are the best solution for high performance and racing engines. Silver Spark Plugs provide many unique and beneficial characteristics, Silver is taking spark plug technology to a whole new level, here are many reasons why our Brisk Silver Racing Spark Plugs are beneficial for your engines performance. Silver is the best conductor of any metal! It conducts 560% more electricity & 481% more heat than Platinum, and 276% more electricity & 177% more heat than Iridium.
Silver spark plug electrodes transfer electricity & heat better than any other spark plug material resulting in the most powerful spark! This is beneficial for a full complete combustion of the available fuel and air in the combustion chamber, combustion efficiency creates horsepower gains.
Key Benefits and Applications of Brisk Silver Racing Spark Plugs:
Silver is the best Electric and Heat Conductor - the best material for performance and racing spark plugs
Superior Ignition Ability Increases Engine Power Lower Required Supplied Ignition Voltage
Good Resistance to Fouling and Easier Starts
Race Engines and Engines with Hard to Ignite Fuels
Supercharged / Turbocharged / Nitrous engines
Excellent for Total Loss Ignition Systems
Excellent Spark Plug Choice for any Vehicle, Stock or Modified, even for High Mileage Vehicles and Vehicles With Oil Consumption Problems
Spark Plug Specs:
12mm thread
1.05"(26.1mm) reach
14mm Bi-Hex
gasket seat
non-projection tip
resistor
Silver center el.
cut-back ground electrode
* Replacement for NGK SILZKBR9F8S (BMW# 12120042724)
* One heat range colder than NGK 97506 SILZKBR8D8S
When it comes time to change your spark plugs, you may wonder about colder stepped spark plugs as many others have. Colder spark plugs work by pulling more heat out of the engine's cylinders (making them "colder") and dissipating it into the engine's head, which is then cooled by the cooling system. Depending on how you have your engine built, these could be a great addition! Colder plugs can help prevent engine knock and prevent the tip of the spark plug from melting or misfiring.
There are two rules that most people tend to go by when deciding on which spark plugs to buy:
The first rule of thumb is that with every 100 horsepower added, you should run spark plugs that are a step colder than your stock plugs. This is generally accepted across the motorsports community but unfortunately isn't always the most accurate measurement of when you will need colder plugs.
The second rule is to go a step colder any time you massively alter cylinder temperatures by adding forced induction to an NA engine, by increasing compression ratio, after altering timing in a major way, or by changing fuel types to something with a higher octane rating such as racing fuel.
Adding spark plugs that are a step colder outside of these conditions, with no real change to the engine, can actually hurt more than help by leading to spark plugs fouling quicker than normal and by making the car harder to start in cold weather conditions.
Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!
The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.
K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top tier product for your European vehicle.
Features:
At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.
This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX 328i 328iX 335i 335iX
2006 - 2013 E9X 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2010 - 2016 F10 5 Series Sedan 528i 528iX 530i 535i 535iX
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi
2007 - 2010 E60 528i 528xi 535i 535ix
2009 - 2016 E89 Z4 Roadster Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i
2014+ F22 2 Series Coupe 228i 228iX M235i M235iX
2007 - 2013 E88 1 Series Convertible 128i 135i
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i
2007 - 2011 E70 X5 3.0sd X5 3.0si
