BMW Engine Parts for BMW X Series E84 (2013-2015)

Precision Raceworks Bucketed Low-Pressure Fuel Pump Kit - Stage 2 - B...

T#:1331979

Part#: 601-0176

In Stock

$ 419.99 USD

Add to Wish List

Qty

$ 419.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Precision Raceworks' Low-Pressure Bucketed Fuel Pump Kits. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! In order to prevent having to send in your fuel pump, each of Precision Raceworks' kits includes thorough instructions and all of the items required to assemble your kit at home. This prevents delays in shipping, potential damage to your stock fuel pump housing, and reduces assembly costs to keep prices low. It also improves installation as there is no guesswork on engagement and sealing of o-ring or complications and risks of tightening clamps that can poke holes in critical plastic components nearby. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course or drag racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Valve Spring Removal & Installation Kit

10X Entries Into Our F80 M3 Sweepstakes

T#:589348

Part#: 029610SCH01A

In Stock

Sale - Save 15% $ 94.99

This product was last offered at the strikethrough price on
05-03-2026

$ 80.74 USD

Add to Wish List

Qty

Sale - Save 15%

$ 94.99

This product was last offered at the strikethrough price on
05-03-2026

$ 80.74 USD

Add to Wish List

Elevate your BMW maintenance with this comprehensive tool kit designed for valve and valve stem seal removal and replacement, all without the need to remove the head. This time-saving kit ensures efficiency and ease in the process, making it an essential for DIY enthusiasts and professionals alike. The universal fitment and a range of adapters guarantee versatility across various brands and motors, providing maximum utility.

Removes and replaces valves and valve stem seals without head removal
Time and effort-saving solution
Wide range of adapters for versatile use
Universal fitment for compatibility with different brands and motors
Essential for DIY and professional use

Contents:

1 - Lever Bar
4 - Valve Spring Compressor Adapters
1 - Slotted/Notched Pulling Device
1 - Hook Pulling Device
1 - Connector for Valve Spring Adapters
1 – Connector for Pulling Device
1 - Extension for Valve Spring Adapters

Show More Show Less

3/8" Drive 45-Tooth Digital Torque Wrench

10X Entries Into Our F80 M3 Sweepstakes

T#:396470

Part#: 023382SCH01A

In Stock

Sale - Save 15% $ 159.99

This product was last offered at the strikethrough price on
05-03-2026

$ 135.99 USD

Add to Wish List

Qty

Sale - Save 15%

$ 159.99

This product was last offered at the strikethrough price on
05-03-2026

$ 135.99 USD

Add to Wish List

Discover precision tailored to BMW and MINI enthusiasts with the Schwaben 3/8" Drive Digital Torque Wrench – a fusion of precision, convenience, and lasting quality that defines your enthusiast spirit. Elevate your car maintenance with the convenience of digital precision, backed by our LIFETIME REPLACEMENT program that underscores our commitment to quality. Features: Precision Perfected: This torque wrench merges micro-adjustable excellence with a digital display of torque units, guaranteeing accuracy that aligns with professional standards. Easy to Read: This wrench's digital screen allows for a quick glance to suffice when checking your torque so you don't have to search for it! Versatile Control: The reversible 3/8" drive 45-tooth head, coupled with a push-button release, empowers you with effortless operation. Tailored Torque: With a range of 15-80 ft-lbs and 20-110 N-m, it's engineered to excel across various applications. Unit Variety: Read torque effortlessly in your preferred metrics: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg. Designed for Comfort: Its ergonomic 16" (370mm) length ensures comfortable handling, precision, and control. Unwavering Accuracy: With a remarkable accuracy within +- 3%, every task becomes a statement of confidence. On-the-Go Ready: Housed in a user-friendly blow-molded case, this torque wrench is primed for storage and mobility. Continuous Power: The included 3V CR2032 battery ensures seamless operation, offering you uninterrupted convenience.

Show More Show Less

Precision Raceworks Replacement Spark Plug Wires - For 601-0021 & 601...

T#:3786918

Part#: 201-0002

In Stock

$ 69.99 USD

Add to Wish List

Qty

$ 69.99 USD

Add to Wish List

Precision Raceworks' BMW N54 / N55 replacement spark plug wires are the same plug wires that are included in their High-Performance Ignition Kits 601-0021 & 601-0021-1

Rein Valve Cover - BMW N55

2X Entries Into Our F80 M3 Sweepstakes

T#:34114257

Part#: 11127570292

In Stock

Sale - Save 5% $ 254.99

This product was last offered at the strikethrough price on
08-31-2026

$ 242.24 USD

Add to Wish List

Qty

Sale - Save 5%

$ 254.99

This product was last offered at the strikethrough price on
08-31-2026

$ 242.24 USD

Add to Wish List

Valve Cover by Rein is a crucial component designed to protect and seal the top of your BMW’s engine, ensuring optimal performance and preventing oil leaks. Engineered specifically for BMW engines, this high-quality valve cover provides a precise fit and exceptional durability. Available at Turner Motorsport, the Valve Cover by Rein offers long-lasting reliability, protecting critical engine components from damage while maintaining proper oil pressure.

Designed specifically for BMW engines for perfect fit and function
Prevents oil leaks, maintaining proper engine lubrication
Made from high-quality, durable materials for long-lasting performance
Direct-fit replacement ensures hassle-free installation
Protects critical engine components and improves engine efficiency
Helps maintain proper oil pressure for optimal engine performance

The Valve Cover VCE0101 by Rein from Turner Motorsport is the ideal solution for BMW owners seeking to protect their engine, prevent oil leaks, and ensure reliable performance.

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW E-...

T#:5216002

Part#: 601-0110

In Stock

$ 868.99 USD

Add to Wish List

Qty

$ 868.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 3 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 1000whp on 93 octane pump gas or 875whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 3 Specifications: Horsepower Supported Pump Gas: ~1000whp Horsepower Supported 100% E85: ~875whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

IWIS N55 Engine Oil Pump Chain Kit - BMW E82/88 E9X F3X F25 F26 E70/7...

T#:36981080

Part#: 90001301

In Stock

$ 314.36

This product was last offered at the strikethrough price on
05-04-2026

$ 304.83 USD

Add to Wish List

Qty

$ 304.83 USD

Add to Wish List

Prevent costly failure with this IWIS Engine Oil Pump Chain Kit! This kit contains all of the basic items needed to service your oil pump drive system and prevent failure long before it occurs. Chains can stretch and chain guides and tensioners can wear out, leading to the chain skipping teeth. This prevents the oil pump from being driven at the proper speeds. If not addressed, the chain could begin to "slip" over the gears, failing to drive the oil pump. When this occurs, oil pressure will drop suddenly, failing to properly lubricate sensitive internal engine components such as main bearings, rod bearings, and camshaft ledges and lobes, resulting in severe scoring and eventual engine failure.

Show More Show Less

1/2" Drive 45-Tooth Digital Torque Wrench

10X Entries Into Our F80 M3 Sweepstakes

T#:396471

Part#: 023380SCH01A

In Stock

Sale - Save 10% $ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 168.29 USD

Add to Wish List

Qty

Sale - Save 10%

$ 186.99

This product was last offered at the strikethrough price on
05-03-2026

$ 168.29 USD

Add to Wish List

Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer.

This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

Specifications:

Setting Range: 45-220 ft lbs (60-300 Nm)
Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
Size: 22" (550mm) length for easy leverage
Accuracy: +- 3%
Include blow molded holding case
Requires one 3V CR2030 battery (included)

Show More Show Less

MMX Performance - 4-Pin One-Piece Crank Hub Upgrade Kit - With MMR Ca...

T#:45039725

Part#: MMR20-1004FK

Ships in 3 Business Days

$ 1,227.99 USD

Add to Wish List

Qty

$ 1,227.99 USD

Add to Wish List

The centerpiece of this MMX kit is the UK-made CNC-machined one-piece crank hub, created from billet EN36 steel that's heat-treated with a 0.75mm case hardening, making it incredibly strong and durable. Included are four aerospace precision-machined dowels that mechanically lock the hub to the end of the crank itself, plus a brand new OE bolt. Installation of these dowels is certainly not a DIY job. But, to make the job easier for the professionals, ensuring that the required crank modifications are made safely and accurately, the MMX kit also includes a full installation jig that includes a bolt-on drilling guide, a location bolt for this guide, plus an HSS rolled high-speed drill bit. Together, the single-piece design combined with the four-pin location ensures that there is simply no way that the friction plates can ever slip. With the new OE crank bolt tightened appropriately, this delivers a transformational improvement in reliability and peace of mind versus the OE version. Also included is the MMR Crank Bolt Capture Plate. This adds one additional layer of defense, preventing the crank bolt from being able to back out and loosen over time, ensuring everything is tightly held together as intended.

Show More Show Less

Precision Raceworks Bucketed High Performance Fuel Pump Kit - Stage 2...

T#:8169508

Part#: 601-0116

In Stock

$ 594.99 USD

Add to Wish List

Qty

$ 594.99 USD

Add to Wish List

The Precision Raceworks E9x / E8x LOW PRESSURE BUCKETED FUEL PUMPS are designed for customers looking to run all blends of E85 and flow up to 3.9 liters per minute. The included Genuine Walbro 535 (F90000295) fuel pump is capable of flowing up to 350% more fuel than the factory fuel pump and is 100% E85 compliant. Precision Raceworks' Stage 2.5 V2 bucketed fuel pump comes with a single Walbro 535 (F90000295) fuel pump. This pump can support up to 650whp (Rated for 550whp on 100% E85) and is ready to grow with you as your needs demand. Unlike other manufacturers, Precision Raceworks is the only company featuring a bucketed kit with a modular design. This means you can purchase their stage 3 pump module or Stage 3.5 module and upgrade the pump as your needs change. If you are looking for a 100% assembled drop-in-ready solution, this is the choice for you! **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements. This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. Features & Specifications: Lock Ring Tool Included Pump flow 72psi (5bar): 1.0 GPM / 3.9 LPM Pump Weight: 3.98 lbs Horsepower Supported Pump Gas: 650 Horsepower Supported 100% E85: 550 Aftermarket EKP Required: No

Show More Show Less

MMX Oil Filter Housing - Black

T#:4552065

Part#: MMR03-0101-BL

Ships in 1 Business Day

$ 142.99 USD

Add to Wish List

Qty

$ 142.99 USD

Add to Wish List

If you are looking for peace of mind over the prone to cracking OEM plastic housing cap, this oil filter housing cap by MMX may be exactly what you are looking for. Composed of billet aluminum, this cap is light, durable, and dresses up your engine bay! Comes finished with a polished anodized dark anthracite coating. Installation is simple as it can be replaced while completing an oil change. *Note: After exposure to excessive heat over prolonged periods, overall finish fading can occur.

Show More Show Less

MMR Crank Hub Kit - N55/S55

T#:4565824

Part#: MMR20-1003FK

Ships in 2 Business Days

$ 849.99 USD

Add to Wish List

Qty

$ 849.99 USD

Add to Wish List

Anyone with a modified N55/S55 knows the risks involved with the OEM Crank Hub. When the engine simply can't handle the stresses its put under or the design is such that it simply does not support extreme conditions, issues can arise. Under certain conditions, the N55/S55 crank hub likes to spin, without warning and even when the engine is in perfect health. MMR has produced a EN36 machined billet one-piece crank hub heat treated with a 0.75mm case hardening which makes it extremely durable. Due to the one-piece design, it ensures that the friction plates cannot slip. This offers a huge jump in reliability when paired with a new properly torques crank bolt. Installation is requires no drilling or modification to the OEM crankshaft ensuring a perfect fit! Included in this kit is MMR's T-6061 machined billet aluminum capture plate anodized in their trademark finish. The MMR Performance capture plate secures the head of the OE crank bolt and prevents it from turning or being able to loosen. *Installation recommended by a professional shop or technician.

Show More Show Less

S55 / N55 One-Piece Crank Hub Upgrade Kit - 4-Pin

T#:19891361

Part#: MMR20-1004

Ships in 1 Business Day

$ 1,064.99 USD

Add to Wish List

Qty

$ 1,064.99 USD

Add to Wish List

Both the N55 and S55 engines are plagued by the same issue when chasing high horsepower numbers... the dreaded crankhub failure. Fortunately MMR Performance has released an upgraded version of their already stout single-piece crankhub, but this time offering a 4-pin dowelled location that locks onto the front of the crankshaft. This configuration eliminates the multi-piece crankhub with friction discs in favor of a more robust single piece crankhub. Recommended for high-powered cars over 700 Horsepower

Show More Show Less

Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW E-...

T#:5215999

Part#: 601-0096

Ships in 8 Business Days

$ 519.99 USD

Add to Wish List

Qty

$ 519.99 USD

Add to Wish List

If you are looking to get more power out of your BMW, it's important not to forget your fueling system! Your low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially true when running ethanol blends. Bring your fuel system up to par with Precision Raceworks' E-Chassis High-Performance Fuel Pump Kits! Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone. Best of all, these pumps ship completely assembled and ready to install! New pump, new fuel filter, and new sending unit included! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. By design, a fuel pump such as this is ideal for daily driving and racing applications of all kinds. This system keeps the primary pump fully submerged in fuel regardless of tank level or the g-force the car is subjected to. Precision Raceworks' Stage 2 bucketed fuel pump kit includes a Walbro 450 (F90000274) fuel pump, capable of supporting up to 575whp on 93 octane pump gas or 500whp on 100% E85! Even better yet? No wires to cut or splice, nothing to assemble, 100% OEM quality, and drop-in ready. Included in the box New genuine OEM fuel pump bucket assembly (Pre-assembled with genuine Walbro 450 pump) Includes new fuel sending unit (fuel level sensor) New primary and secondary fuel filters Stage 2 Specifications: Horsepower Supported Pump Gas: ~575whp Horsepower Supported 100% E85: ~500whp Aftermarket EKP Required: No **Some European Spec vehicles may require the re-use of the top hat due to differences in emissions requirements.

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2+ -...

T#:1331984

Part#: 601-0062

In Stock

$ 424.99 USD

Add to Wish List

Qty

$ 424.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running an ethanol blend. Upgrade your BMW fuel pump with Black Market Parts (by Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2+ bucketless fuel pump kit includes a genuine Walbro 535 (F90000295) fuel pump, capable of supporting up to 650whp on 93 octane pump gas or 575whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2 - ...

T#:1165729

Part#: 601-0017

In Stock

$ 349.99 USD

Add to Wish List

Qty

$ 349.99 USD

Add to Wish List

When upgrading your turbos or increasing your BMW's power potential, it's important not to overlook your fuel pump. Both low and high-pressure fuel pumps can only flow so much fuel, limiting power potential regardless of turbo size or other power adders, especially when running ethanol blends. Upgrade your BMW fuel pump with the Black Market Parts (By Precision Raceworks) Low-Pressure Bucketless Fuel Pump. Precision's low-pressure fuel pumps are designed to flow significantly more fuel than your BMW's stock system, ideal for customers who are upgrading their vehicles or plan to run blended fuel or E85 alone! This is a true plug-and-play solution that anyone can install in their home garage and start taking advantage of the benefits right away. The Black Market Parts Stage 2 bucketless fuel pump kit includes a genuine Walbro 450 (F90000274) fuel pump, capable of supporting up to 600whp on 93 octane pump gas or 550whp on 100% E85, and is the perfect modular pump to get you started! Always looking ahead, Precision Raceworks designed their modular bucketless fuel pump kit to allow you to upgrade your fuel pump as needed! With an open expansion slot, a simple Stage 3 or Stage 3.5 pump module is all you need to purchase to increase your fueling capabilities up to 1100whp*. While all bucketless fuel pumps flow .2gpm more than a bucket design that retains the venturi, it comes at a cost. Bucketless pumps should not be driven on tanks lower than 1/4 full and should not be used for road course or drag racing. This is not a disadvantage of only bucketless designs, but also a disadvantage for any bucket design which deletes the venturi. If you do not plan on road course racing (not street racing) and are responsible at maintaining 1/4 tank of fuel during spirited driving, bucketless pumps can be a cheaper alternative for you.

Show More Show Less

Valve Cover - With PCV Valve

2X Entries Into Our F80 M3 Sweepstakes

T#:594483

Part#: 11127588412

In Stock

Sale - Save 7% $ 326.99

This product was last offered at the strikethrough price on
07-15-2026

$ 304.41 USD

Add to Wish List

Qty

Sale - Save 7%

$ 326.99

This product was last offered at the strikethrough price on
07-15-2026

$ 304.41 USD

Add to Wish List

THINKDIAG (include 1 Free Software)

T#:2302718

Part#: 301180767

Ships in 1 day

Sale - Save 32% $ 101.99

This product was last offered at the strikethrough price on
08-23-2026

$ 69.59 USD

Add to Wish List

Qty

Sale - Save 32%

$ 101.99

This product was last offered at the strikethrough price on
08-23-2026

$ 69.59 USD

Add to Wish List

ThinkDiag is prefect to use with the unique THINKCAR app. Easy and convenient, anytime and anywhere.

Iwis Timing Chain - N55 N20 N52

T#:579676

Part#: 50042415

Ships in 1 day

$ 114.17 USD

Add to Wish List

Qty

$ 114.17 USD

Add to Wish List

Valeo New Starter Motor - E70, E71, E82, E84, E88, E92, E93, F10, F30...

For vehicles with production date from 03/2011

We Price Match - Give Us A Call or Chat!

T#:594588

Part#: 12417616502

In Stock

$ 265.76 USD

Add to Wish List

Qty

$ 265.76 USD

Add to Wish List

Brand new unit - no core charge! Avoid messing with a core return entirely!

Black Market Parts Multi-Port Injection Kit - 750cc - BMW N54/N55 3.0...

T#:1316810

Part#: 601-0015

In Stock

$ 699.99 USD

Add to Wish List

Qty

$ 699.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! Using stock BMW injectors, you will likely top out at around 550rwhp on 93 Octane with water/methanol injection (or less if running an ethanol blend). At the end of the day, the stock injectors just are not enough. Introducing Black Market Parts (by Precision Raceworks) Multi-Port Injection Kit with flex-fuel compatibility! This kit allows you to safely and sufficiently support greater power levels with supplemental fueling without straining your stock fuel system. This kit integrates seamlessly into your car as if it were installed at the factory; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. Precision Raceworks includes new Genuine Bosch injectors which are flow matched both static and dynamic by an outside lab to industry-leading requirements. A Detailed certificate of conformance and genuine Bosch product certificate is included with each kit, giving you all flow data needed for optimal tuning. Don’t be tricked into thinking all port injection kits are equal, the BMP kit is the industry leader. This kit features 750cc* injectors standard (this flow rate is based on industry-standard injector flow test pressure of 43.5psi), and at 72psi these injectors flow over 1000cc. This means Precision's BMP Port Injection Kit is capable of supporting builds from 400whp up to 1,000whp and anywhere in between! Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

Black Market Parts Multi-Port Injection Kit - 330cc - BMW N20/N26 2.0...

T#:5229453

Part#: 601-0166

Ships in 9 Business Days

$ 689.99 USD

Add to Wish List

Qty

$ 689.99 USD

Add to Wish List

If you plan on upgrading your turbos or increasing power in some other way, you will also want to consider upgrading your fueling capability as well! The Black Market Parts Multi-port Injection (MPI) kit with flex fuel capability is a necessity to safely and sufficiently support the power levels of upgraded turbos. This kit is capable of supporting all BMW’s with N20 & N26 engines with supplemental fueling. This kit integrates seamlessly into your car like it left from the factory with it installed; you can’t even see the kit once the car is assembled! This kit includes everything needed to add multi-port injection and is 100% e85 compliant. We include new genuine Bosch Motorsport injectors. This kit features 330cc* injectors standard (this flow rate is based on industry injector flow test pressure of 43.5psi). Additionally, we offer a further upgrade to 750cc* injectors! These are the same ones found in our N54/N55/S55 port injection kit and will provide all the supplemental fuel even your largest HP N20 & N26 motors can handle. Simply pick up this kit and pair it with your favorite injector controller and you are ready to go!

Show More Show Less

TurboSmart WG38 Gen V Ultra-Gate 38 - 14PSI - Black

T#:4921469

Part#: TS-0551-1012

Ships on Sep 17, 2026

10% off MSRP $ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

Qty

10% off MSRP

$ 430.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 387.99 USD

Add to Wish List

The Turbosmart GenV range is the Highest Flowing Wastegate range in the World. The GenV WG38 UltraGate38 External Wastegate is a Motorsport proven, cost-effective external wastegate. The GenV provides extensive user configuration, world-leading extended thermal performance, fatigue resistance, and best-in-class flow performance for optimum control and longevity. The GenV External Wastegate from Turbosmart was a ground-up rework of a classic and the only feature that rolled over from the Gen4 range was the mounting orientation. CFD optimized and validated in-house for maximum flow and thermal management, the GenV range has more features, options and performance than any other gate like it. A direct fit upgrade to all Gen4 Turbosmart wastegates and feature our unique collar-locking system, variable actuator cap, and base for easy, 360-degree optional routing of reference hoses, optional liquid-cooling provision, 1/8″ NPT reference ports and are provided with the full range of available springs.

Show More Show Less

Universal ThinkCheck M70

T#:4347115

Part#: 303020049

In Stock

$ 264.99

This product was last offered at the strikethrough price on
08-24-2026

$ 221.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 264.99

This product was last offered at the strikethrough price on
08-24-2026

$ 221.99 USD

Limited Qty Sale

Add to Wish List

Universal ThinkCheck M70

The Universal ThinkCheck M70 offers comprehensive diagnostic capabilities for a wide range of vehicle systems, including ECM, TCM, ABS, SRS, BCM, IC, and AC. Featuring a 10-mode function, this advanced tool provides real-time diagnostics and supports quick software updates through WiFi connectivity. Ideal for vehicles from 1996 and newer, it comes with a 5-inch touch screen and offers numerous features to streamline vehicle maintenance and diagnostics.

Benefits:

Comprehensive Diagnostic Functions: Covers ECM, TCM, ABS, SRS, BCM, IC, and AC with 10-mode functionality.
WiFi Connectivity: Enables one-click software updates and automatic vehicle health diagnostic reports.
Versatile Compatibility: Supports vehicles from 1996 and newer with 16-pin OBD II protocol.
Enhanced Data Management: Offers DTC lookup, real-time PCM data stream reading, and data record and playback.
User-Friendly Interface: Features a 5-inch LCD touch screen and a fast 7.0 Android system for efficient operation.
Long-Lasting Battery: Equipped with a 6100mAh battery for extended use.
Lifetime Free Service: Includes 5 resets and free updates for ongoing maintenance.

Show More Show Less

Iwis Timing Chain - N20 N55 N52

T#:362851

Part#: 11317584084

Ships in 5 Business Days

$ 109.99

This product was last offered at the strikethrough price on
07-01-2026

$ 109.03 USD

Add to Wish List

Qty

$ 109.03 USD

Add to Wish List

MMX Billet Air Conditioning Caps - Pair Grey R134A

T#:48608191

Part#: MMR03-0004

Ships in 5 Business Days

$ 40.00 USD

Add to Wish List

Qty

$ 40.00 USD

Add to Wish List

Project Cars

SELECT YOUR BMW

BMW Engine Parts for BMW X Series E84 (2013-2015)

Sub-Categories

Precision Raceworks Bucketed Low-Pressure Fuel Pump Kit - Stage 2 - B...

Valve Spring Removal & Installation Kit

3/8" Drive 45-Tooth Digital Torque Wrench

Precision Raceworks Replacement Spark Plug Wires - For 601-0021 & 601...

Rein Valve Cover - BMW N55

Precision Raceworks High Performance Fuel Pump Kit - Stage 3 - BMW E-...

IWIS N55 Engine Oil Pump Chain Kit - BMW E82/88 E9X F3X F25 F26 E70/7...

1/2" Drive 45-Tooth Digital Torque Wrench

MMX Performance - 4-Pin One-Piece Crank Hub Upgrade Kit - With MMR Ca...

Precision Raceworks Bucketed High Performance Fuel Pump Kit - Stage 2...

MMX Oil Filter Housing - Black

MMR Crank Hub Kit - N55/S55

S55 / N55 One-Piece Crank Hub Upgrade Kit - 4-Pin

Precision Raceworks High Performance Fuel Pump Kit - Stage 2 - BMW E-...

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2+ -...

Black Market Parts Low-Pressure Bucketless Fuel Pump Kit - Stage 2 - ...

Valve Cover - With PCV Valve

THINKDIAG (include 1 Free Software)

Iwis Timing Chain - N55 N20 N52

Valeo New Starter Motor - E70, E71, E82, E84, E88, E92, E93, F10, F30...

Black Market Parts Multi-Port Injection Kit - 750cc - BMW N54/N55 3.0...

Black Market Parts Multi-Port Injection Kit - 330cc - BMW N20/N26 2.0...

TurboSmart WG38 Gen V Ultra-Gate 38 - 14PSI - Black

Universal ThinkCheck M70

Universal ThinkCheck M70

Benefits:

Iwis Timing Chain - N20 N55 N52

MMX Billet Air Conditioning Caps - Pair Grey R134A

Select Vehicle

Purpose

Category

Brand

Price

Special Offers

Shipping

Narrow Results