BMW Fuel System Parts for BMW X Series E84 (2013-2015)

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor

T#:28537533

Part#: 101-0216

Ships in 5 Business Days

$ 105.00 USD

Add to Wish List

Qty

$ 105.00 USD

Add to Wish List

BMW B46 B48 B58 Motiv ReFlex 0-10 Bar Pressure Sensor is designed for accurate measurement of fluid and air pressure in high-performance applications. Ideal for monitoring a variety of pressures including fuel, boost, coolant, and oil, this sensor provides crucial data for optimizing vehicle performance.

Featuring a 2-Pin DTM connector, this sensor offers a direct plug-and-play connection to the ReFlex+ harness, ensuring a seamless integration with flash platforms via CANbus. Each ReFlex+ unit can support up to two of these sensors, allowing for comprehensive monitoring.

Versatile Measurement: Capable of measuring fuel pressure, boost, coolant, oil, and other fluids.
Easy Integration: 2-Pin DTM connector provides a direct plug-and-play connection.
Comprehensive Monitoring: Supports integration of up to two sensors per ReFlex+ unit.
High-Performance Design: Designed to handle high pressures and deliver accurate readings.

For optimal installation, consider using the 3/8 Female to 3/8 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on an ethanol sensor or the 5/16 Female to 5/16 Male SAE Quick Disconnect Adapter with a 1/8" NPT port on a factory fuel line. Please note that the ethanol sensor is not included.

Show More Show Less

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness

For Vehicles With Motiv ReFlex Unit Currently Installed Only

T#:22723690

Part#: 101-0212

In Stock

$ 49.00 USD

Add to Wish List

Qty

$ 49.00 USD

Add to Wish List

BMW B46 B48 Motiv ReFlex Plug-n-Play Ethanol Sensor Harness simplifies the integration of an ethanol content sensor into your BMW's Re|Flex system. This harness is designed to enhance your vehicle's performance by scaling the sequential port injection based on real-time ethanol content, eliminating the need for manual adjustments. Key benefits include:

Effortless Installation: Plug-n-play design makes it easy to connect an ethanol content sensor without extensive modifications.
Real-Time Adjustments: Allows for automatic scaling of port injection based on real-time ethanol content, optimizing engine performance.
Seamless Integration: For CANbus integrated vehicles, it facilitates integration with the factory DME/ECU (pending feature release by tuning platforms).
No Manual Flashes Required: Removes the need for ground disconnection or map switching on your port injection controller.

Please note that the ethanol sensor is not included with this harness.

Show More Show Less

DeatschWerks 255 LPH In-Tank Fuel Pump W/ Universal Set Up Kit ...

Not for sale or use in the state of California.

T#:34919033

Part#: 9-201-1000

In Stock

$ 109.00 USD

Add to Wish List

Qty

$ 109.00 USD

Add to Wish List

DeatschWerks 340 LPH In-Tank Fuel Pump with a Universal Set Up Kit ...

This is Universal and Not a direct replacement for the Genuine Pump!

T#:6091453

Part#: 9-301-1000

In Stock

$ 169.00 USD

Add to Wish List

Qty

$ 169.00 USD

Add to Wish List

DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. The DW300 is DeatschWerks' flagship standard fitment in-tank pump. The DW300 flows 340lph at 40psi and is a popular choice for e85 applications or wherever the highest flowing standard fitment in-tank pump is needed. Quiet operation and pulse width modulation compatibility are delivered via the turbine impeller and computer balanced armature. E85 compatibility is built in via the carbon commutators and a fully encapsulated armature. All DW fuel pumps are backed by a 3-yr no fault warranty. Features: Weight 12.6 oz (360grams) 7.7mm ID/11mm OD inlet fitting Outlet 5/16" Hose Clamp Single Scroll Composite Turbine All instructions are also provided on DeatschWerks' website.

Show More Show Less

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6

T#:29201081

Part#: 900.1008

In Stock

$ 200.00 USD

Add to Wish List

Qty

$ 200.00 USD

Add to Wish List

BMW B58 3.0L ReFlex+ Main Injector Harness - Inline-6 offers a seamless integration solution for your turbocharged BMW inline-6 engine. Designed to work with the Motive ReFlex Control Unit, this plug-n-play harness ensures a hassle-free installation process for your 6 EV6/USCAR injectors.

Direct Plug-N-Play Installation: Connects directly to the ReFlex+ Control Unit and your EV6/USCAR injectors.
Versatile Connector Options: Includes DTM 3-Pin and 2-Pin connectors for integration with ethanol content sensors and external sensors.
Multiple Sensor Connectors: Features connections for a 0-10 Bar Pressure Sensor and a 0-5v sensor.
Auxiliary Output Wires: Provides 3x unterminated wires for additional low-side triggers from the ReFlex+ Control Unit.
Easy Connection: DTM 8-Pin connector allows for straightforward setup with ReFlex+ Install Harnesses.

Turner Motorsport's harness ensures efficient and reliable performance, streamlining the process of integrating your ReFlex+ Control Unit with your BMW B58 engine.

Show More Show Less

3/8" Quick Disconnect Adapter With 1/8" NPT Port

T#:29500156

Part#: 200.1105

In Stock

$ 24.00 USD

Add to Wish List

Qty

$ 24.00 USD

Add to Wish List

Quick disconnect adapters (QDA) are commonly used to adapt different components into vehicle fuel systems without requiring permanent modification. These adaptersÂ are machined from high-grade aluminum and anodized for corrosion resistance. QDAs incorporate VitonÂ© o-rings which are compatible with most types of fuel, solvents and oils. QDAs maintain a reliable leak-proof seal under normal fuel injection system operating pressures. This particular QDA is sized perfectly to adapt right between the fuel line you were going to connect to your ethanol sensor. 3/8" (9.5mm) female quick disconnect 3/8" (9.5mm) male quick disconnect 1/8" Female pipe thread port * Viton© o-rings Crecent-lock system E-85 compatible Black anodized aluminum

Show More Show Less

ReFlex+ Install Harness - Flying Lead

T#:29201083

Part#: 900.1016

Ships in 5 Business Days

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

A flying lead harness is a wiring harness that is unterminated at one end and has an excess length of wire so that installation can be customized by the end user. That makes this section of the ReFlex+ Install Harness truly universal. On one end, this harness has an 8-pin connector to plug into any one of our ReFlex+ Main Injector Harnesses. The other end of each wire is unterminated and will be connected to the appropriate sensor, ground, or power supply based on installation instructions. Each harness has a wire for: Switched +12v Input w/ inline fuse +5v Input Ground Can HI Can Lo Cam Sensor Signal Crank Sensor Signal Map Sensor Signal

Show More Show Less

DeatschWerks Performance Fuel Injector Set - 50lb/hr(550cc)

For Custom Applications - Will require additional tuning or modifications. NOT DIRECT DROP IN!

T#:6151339

Part#: 16U-00-0050-6

In Stock

$ 403.99

This product was last offered at the strikethrough price on
06-03-2026

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. All DeatschWerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Full set of 6 50lb/hr 550cc injectors. All relevant tuning data available on DeatschWerks website.

Show More Show Less

Spool Performance Helix HPFP Overdrive Unit - N55

T#:9642131

Part#: SP-54HX-1-N55

Ships in 4 Business Days

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

Spool Performance is a top name in the BMW Forced Induction industry. Their team of young and intelligent engineers pair their passion for the industry with a rich education background, which results in a high-quality enthusiast-minded products. Spool Performance's state-of-the-art upgrades for your BMW fueling systems are a surefire way to make more power, reliably. The Helix from Spool is simply a planetary gearbox for your High-pressure fuel pump. The particular configuration of the gears and their spatial fixturing allows an axial increase in shaft speed from the input to the output of the unit. The early N55 high-pressure pump is a very capable and over-engineered piece of hardware. As we start tuning and pushing more power, we start seeing drops in the high pressure. What is happening here is that the high-pressure pump is not able pump as much fuel as the injectors are injecting into the cylinders and hence causing the rail pressures to drop. The pump at this point is running out of displacement volume. With a rotary pump like the continental HPFP, an easier way to increase displacement is to spin the pump faster which results in an increased number of delivery strokes per cycle. The Helix helps you do exactly this and thus helps overcome a big limitation in early N55 fuel systems without the complexity of a secondary port injection system.

Show More Show Less

BMW Fuel Line Upgrade - Short Line Kit

T#:29267521

Part#: 900.1025

In Stock

$ 150.00 USD

Add to Wish List

Qty

$ 150.00 USD

Add to Wish List

Factory fuel lines are often not designed or safe for use with ethanol based fuels. Our PTFE fuel lines are the perfect solution for installing into your vehicle without having to permanently modify your vehicle's fuel lines. Simply uninstall the factory line and install our pre-measured lines that come setup with the correct fittings for a plug-n-play install in your vehicle. Please Note: This does NOT include an ethanol Content Sensor.

Show More Show Less

ReFlex Lite Injector Harness - Inline-4

T#:29234303

Part#: 900.1012

Ships in 5 Business Days

$ 140.00 USD

Add to Wish List

Qty

$ 140.00 USD

Add to Wish List

Required when installing a Motiv ReFlex Lite to your inline-4 powered BMW! Includes x4 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!

ReFlex Lite Injector Harness - Inline-6

T#:29234311

Part#: 900.1013

Ships in 5 Business Days

$ 155.00 USD

Add to Wish List

Qty

$ 155.00 USD

Add to Wish List

Required when installing a Motiv ReFlex Lite to your inline-6 powered BMW! Includes x6 injector leads and direct, plug-in adapter to the ReFlex Lite Control Unit!

DeatschWerks DW400 In-Tank Fuel Pump W/ Universal Set Up Kit ...

T#:5389791

Part#: 9-401-1001

In Stock at Vendor

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

The DW400 surpasses the 400LPH benchmark by delivering an industry leading in-tank flow of 415LPH at 40psi. Even more importantly, the DW400 delivers 31% more flow than its nearest competitor, the Walbro 450 "e85", at pressures between 70 and 100 psi. The DW400 has a 46mm diameter width and is compatible with pump gas, e85, and race fuels. The pump is also compatible with pulse width modulated pump drivers. The pump ships with a universal fitment kit which includes fuel hose, clamps, electrical harness, and filter. As with all DW products, the pump is warrantied for 3-yrs to the original purchaser.

Show More Show Less

Multi-Pump Fuel Surge Tank (MPFST)

T#:31059457

Part#: 20-1440

In Stock

$ 549.99 USD

Add to Wish List

Qty

$ 549.99 USD

Add to Wish List

DeatschWerks Performance Fuel Injector Set - 90lb/hr(1000cc) ...

For Custom Applications - Will require additional tuning or modifications. NOT DIRECT DROP IN!

T#:6151338

Part#: 16U-00-0090-6

In Stock

$ 524.99

This product was last offered at the strikethrough price on
07-14-2026

$ 519.00 USD

Add to Wish List

Qty

$ 519.00 USD

Add to Wish List

DeatschWerks was founded in 2004 in Oklahoma and has dedicated themselves to providing high quality EFI applications to a wide variety of manufacturers. DW has developed a wide variety of innovative fuel system components including fuel pumps, modular surge tanks, conversion fuel rails, dual-stage fuel filters, and ethanol compatible fuel pressure regulators. All DeatschWerks high flow fuel injectors are built using only quality OEM cores. In addition, each set is balanced to within a 2% flow variation. This means better fitment, easier tuning, and increased reliability. Full set of 6 90lb/hr 1000cc injectors. All relevant tuning data available on DeatschWerks website.

Show More Show Less