BMW Fuel System Parts for BMW X Series E84 (2013-2015)

Clear BMW chassis

Please ensure your correct model is selected

Looking for a BMW fuel pump, BMW gas cap or other BMW fuel system related items? You've found the right place. Your BMW fuel delivery system is a critical system, and any failure can rended your BMW dead in the water. Whether your fuel pump has stopped pumping, a fuel injector is clogged or not spraying, or your gas cap is either lost or not properly sealing, we likely have what you are looking for. We stock thousands of BMW fuel system parts so if you don't see what you are looking for, just give us a call.

Sub-Categories

Sort By:

Arc Terminator - Corporate Logo
T#:28304525
Part#: EKP-HW05-E-SF
Ships in 1-3 days
$ 199.99 USD
Free Shipping on orders $49 and up
Arc Terminator now offers upgraded EKMP3 Fuel Pump Control Modules featuring a 22 Amp INCREASE in maximum current capacity over an OEM EKPM3. This allows for more current to be supplied to your low-pressure fuel pump (LPFP) without risking thermal overload, which often leads to your car shutting down. This means that you won't have to worry about being stranded on the side of the road while waiting for your EKP module to cool down, especially when you've installed a large low-pressure fuel pump such as a Walbro 525lph. How does the integrated automatic cooling work? The integrated automatic cooling works by us installing a thermal activation switch directly onto the new half bridge IC. When the half bridge IC reaches 50°C, the 40mm fan will turn on and keep running until the IC is below 50°C or until the EKMP3 stops receiving power. I have an EKPM2, can I upgrade to this? Yes. You can upgrade to this. We recommend using the HW05 and below module. You will need to code it in order for it to function properly. Can I run more than 1 low-pressure fuel pump off of this module? No. We do not recommend that you use more than one low-pressure fuel pump with any EKP module due to the factory wiring supplying power to the EKP Module is only 12 gauge, which is not rated for the type of power demands that two low-pressure fuel pumps would require.
Show More Show Less
Burger Motorsports - Corporate Logo
T#:27171925
Part#: UNI-BMS-PIPLUGS
In Stock
$ 60.00 USD
Free Shipping on orders $49 and up
These dummy injectors fit in place of port injection fuel injectors to block the holes. Allows use to aluminum manifolds with port injection bungs without having to purchase fuel injectors. Plugs are EV14 injectors and measure 38mm or 1.5" from o-ring to o-ring.
Show More Show Less
Bav Auto Tools - Corporate Logo
T#:580400
Part#: B8800089
Ships on Sep 30, 2026
Sale - Save 10% $ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.69 USD
Free Shipping on orders $49 and up
Sale - Save 10%
$ 72.99

This product was last offered at the strikethrough price on
05-03-2026

$ 65.69 USD
Free Shipping on orders $49 and up
Used to remove fuel level and fuel pump lock rings properly to avoid damage.

Arc Terminator - Corporate Logo
T#:28304530
Part#: EKP-HW05-E-NF
In Stock
$ 229.99 USD
Free Shipping on orders $49 and up
Arc Terminator now offers upgraded EKMP3 Fuel Pump Control Modules featuring a 22 Amp INCREASE in maximum current capacity over an OEM EKPM3. This allows for more current to be supplied to your low-pressure fuel pump (LPFP) without risking thermal overload, which often leads to your car shutting down. This means that you won't have to worry about being stranded on the side of the road while waiting for your EKP module to cool down, especially when you've installed a large low-pressure fuel pump such as a Walbro 525lph. Includes 40mm Noctua Silent Fan! How does the integrated automatic cooling work? The integrated automatic cooling works by us installing a thermal activation switch directly onto the new half bridge IC. When the half bridge IC reaches 50°C, the 40mm fan will turn on and keep running until the IC is below 50°C or until the EKMP3 stops receiving power. I have an EKPM2, can I upgrade to this? Yes. You can upgrade to this. We recommend using the HW05 and below module. You will need to code it in order for it to function properly. Can I run more than 1 low-pressure fuel pump off of this module? No. We do not recommend that you use more than one low-pressure fuel pump with any EKP module due to the factory wiring supplying power to the EKP Module is only 12 gauge, which is not rated for the type of power demands that two low-pressure fuel pumps would require.
Show More Show Less

Innovate Motorsports - Corporate Logo
T#:22558994
Part#: INN3904
In Stock at Vendor
14% off MSRP $ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD
Free Shipping on orders $49 and up
14% off MSRP
$ 313.99

MSRP stands for Manufacturer's Suggested Retail Price. This is the suggested retail price provided by the manufacturer, supplier or seller.

$ 269.00 USD
Free Shipping on orders $49 and up

Introducing the Innovate Motorsports MTX Digital Series "Dual Function" Gauges – now available! These 2 1/16" (52mm) gauges come with interchangeable faceplates and bezels, locking connectors for simplified installation, and MTS serial connections for seamless integration with other Innovate devices for data logging.

DISPLAY RANGE

  • Ethanol Content %: 0-100%
  • Temperature: -40-257 °F (-40-125°C)

KEY FEATURES

  • Ethanol Content
  • Error reporting for ethanol content sensor (Digital Display)
  • Fuel Temperature
  • Customizable exterior LED display
  • Programmable exterior LED color options
  • Selectable unit of measure in °F or °C
  • Programmable fuel temperature warning (outer LED)
  • 2-Configurable analog outputs
  • Ethanol Content: 0v = 0%, 5v = 100%
  • Fuel Temperature: 0v = -40 °F, 5v = 257 °F (-40-125°C)

MTX-D: Ethanol Content Percentage & Fuel Temp Gauge Kit includes Gauge (Black Faceplate, Black Bezel), Silver Bezel & White Faceplate, Harness, Program Cable (Serial), Ethanol Content Sensor, Quick Start Installation Guide.

Please note that this is a universal fitment gauge, and installation may vary depending on the vehicle.

Show More Show Less
Nostrum - Corporate Logo
T#:9609825
Part#: H703-1257
Special Order: No Guaranteed ETA
$ 1,799.00 USD
Free Shipping on orders $49 and up
The Stage 2 Injectors from Nostrum performance are an absolute must-have for those building big power N55 or S55 vehicles. While there are other injection methods out there - this is the OE upgrade we've all been looking for. These upgraded injectors are a seamless integration and provide the ability to deliver 55% more fuel than stock injectors.
Show More Show Less

Burger Motorsports - Corporate Logo
T#:38890918
Part#: BMSS3BLPFPN5455
Ships on Sep 17, 2026
$ 399.99 USD
Free Shipping on orders $49 and up
If you're already using our Stage 2 Bucketless LPFP and want to upgrade to Stage 3, this kit is for you. If you don’t have the Stage 2 kit, you can purchase it here. Note: Stage 3 requires the Stage 2 bucketless kit. The Stage 3 upgrade kit includes: - Complete plug-and-play solution with the addition of the secondary module - Custom billet aluminum fitting to run both pumps in parallel - Wiring harness for the secondary pump - Spare vent tube clip - New Walbro filter - New E85-compatible Walbro 450 pump (F90000274) - Optional upgrade to Walbro 525 pump (F90000285) Recommended accessories: - Lock Ring Removal Tool - Hobb's switch
Show More Show Less