BMW Z Series E85/6 (2003-2008)

KMAC Stage 1 Street Front Adjustable Camber/Caster Plates - E36, E39 ...

T#:389645

Part#: 192416-1J

In Stock

$ 380.00 USD

Add to Wish List

Qty

$ 380.00 USD

Add to Wish List

Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

E60, E82, E85, E9X, E89 (N52 Engine) JB Racing Lightweight Aluminum F...

T#:2801

Part#: 520-200-240

In Stock

$ 714.00 USD

Add to Wish List

Qty

$ 714.00 USD

Add to Wish List

Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

This JB flywheel replaces the stock flywheel and can be used with either the stock 228mm or stock 240mm clutch discs. Depending on the model you may have either clutch size in your car but this flywheel is compatible with both. You can install a 240mm clutch as a mild upgrade.

Stock Flywheel Weight = 24-31.0lbs
JB Flywheel Weight = 12.0lbs

This item fits the following BMWs:
2006-2010 E60 BMW - 525i, 528i, 530i
2006-2013 E90, E91, E92, E93 BMW - 325i, 328i, 330i
2007-2013 E82 BMW - 125i, 128i
2006-2008 E85, E86 BMW - Z4 3.0i, Z4 3.0si
2009-later E89 BMW - Z4 3.0i

Show More Show Less

JB Racing Single Mass Lightweight Aluminum Flywheel - 6-speed - E46 3...

T#:3474

Part#: 520-190-240

Ships in 8 Business Days

$ 672.00 USD

Add to Wish List

Qty

$ 672.00 USD

Add to Wish List

This is a performance replacement for BMW Part # 21207533868 Aluminum flywheels are much lighter than the stock steel flywheel and that produces better throttle response and more available horsepower to the wheels for faster acceleration. The JB Racing aluminum flywheels are a direct replacement for the stock flywheel and work with stock clutch components for an easy upgrade with very little downside.

Modern flywheels are built with additional components and features that are designed to dampen and minimize vibrations from the engine and transmission. As a result they have become bloated in weight and that means more energy is used up just making the flywheel spin. The weight difference between an aluminum and steel flywheel is huge - sometimes more than 50% less. Without the additional mass, more energy can be diverted to where it counts most - moving the car. The flywheel and clutch is one of the first areas that engine builders address when making the rotating assembly lighter for race engines. The dampening effect is just not needed on cars that are focused on performance.

In addition to releasing more power to the wheels, the lighter flywheel allows the engine to spin more freely, which improves throttle response. Again, the difference is huge as you watch the revs build faster than before. With the engine spinning easier the power band comes up much sooner. The stock steel flywheel feels lazy in comparison. There is a driving adjustment required to get used to how much faster the engine revs but that's not really a downside.

The JB lightweight flywheel is designed to be used with a factory organic clutch - the same clutch kit that you would get from any BMW dealer. This makes replacement clutch components easy to source and inexpensive when compared to specialized racing clutches. By using the factory BMW clutch, JB has also made the whole assembly easy to live with when used on the street. The clutch behaves the same as it originally did - just with better throttle response and more power! The JB flywheel can also be rebuilt with a new clutch contact surface - you don't have to buy a new flywheel.

Aluminum flywheels are considered 'single-mass' flywheels because they do not have the same dampening designs as an original 'dual-mass' flywheel. With a single-mass design more noise and vibration may be noticeable. There are steps you can take to minimize the noise - heavier weight transmission oil and clutch discs with anti-rattle springs (sprung-hub clutch).

The JB Flywheel includes the pilot bearing mounted in the flywheel hub, just like the factory configuration.

Stock Flywheel Weight = 25.0lbs
JB Flywheel Weight = 10.5lbs

This item fits the following BMWs:
2002-2005 E46 BMW 325i 330i (with 6-speed manual transmission)

Show More Show Less

OMP Velocita Steering Wheel - 350mm | Black/Yellow Suede

T#:393626

Part#: OD/1958

In Stock

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

Sport-inspired 3-spoke OMP Velocita Suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Show More Show Less

OMP Mugello Steering Wheel - Wooden 350mm - Special Order

T#:393667

Part#: OD/2023

Ships in 4 Business Days

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

Classic inspired 3-spoke OMP Mugello wood steering wheel in 350mm diameter. Gloss aluminum center with OMP wooden horn button. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have 3 holes each that increase in size as they get closer to the center of the steering wheel.

Show More Show Less

OMP Racing Seat Head cushion for WRC and HRC Seats | Black

T#:393794

Part#: HB/699

Ships in 4 Business Days

$ 69.00 USD

Add to Wish List

Qty

$ 69.00 USD

Add to Wish List

This cushion designed specifically for the WRC and HRC racing seats is a simple addition that adds safety, comfort, and support. It attaches with just two straps to the top of the racing seat and is covered in the same velour fabric as the racing seat itself. A white OMP logo is embroidered in the top half of the cushion to match the design of the seat.

Show More Show Less

OMP Steel tall brackets - 36 holes | Black

T#:393735

Part#: HC/923

Ships on Aug 24, 2026

$ 139.00 USD

Add to Wish List

Qty

$ 139.00 USD

Add to Wish List

Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 36 different positions. Length: 495 mm Thickness: 3 mm

OMP Steel low brackets | Black

T#:393730

Part#: HC/733E

Ships in 10 Business Days

$ 95.99 USD

Add to Wish List

Qty

$ 95.99 USD

Add to Wish List

Steel brackets for side mounted seats. Low model. 350 mm length x 3 mm thick.

Carista Bluetooth OBD2 Adapter - BMW & Mini

This application supports basic OBD2 diagnostics only

T#:391453

Part#: COBD-BT24

In Stock

$ 39.99 USD

Add to Wish List

Qty

$ 39.99 USD

Add to Wish List

Carista is a smartphone application for both iOS and Android devices that allows owners to diagnose vehicle faults, reset service indicators, and customize vehicle systems without any complicated coding. In order to use Carista on your vehicle, only three things are required: An iPhone, iPad, or iPod touch running iOS 8.0 or later OR an Android device running Android 2.3 and up The Carista OBD2 App: Available on the Apple AppStore and Google Play Bluetooth OBD2 Adapter: Available HERE! Uses Bluetooth 4LE which prevents drainage to the car's battery due to it's power saving mode. Since the adapter is Bluetooth, the Wi-Fi connection on your mobile device remains open so you can still browse the internet while still remaining connected to the vehicle. The Carista Bluetooth OBD2 Adapter is also compatible with the OBD Fusion app on iOS and Android. Diagnose (OBD2): Carista can check your vehicle's health and report any faults stored in its computers. You can also clear any fault codes and reset your "check engine" light, as emissions test readiness. This is a FREE feature. Diagnose (Manufacturer-Specific): Unlike regular OBD2 apps, Carista also gives you access to advanced manufacturer-specific diagnostics, including computers like ABS, airbag, navigation, etc. and gives you the ability to reset your airbag light, ABS light, traction control light, etc. Manufacturer-Specific Diagnosis is a PAID feature; supported vehicles only. Customization: Carista gives you the power to personalize the behavior of your car’s windows, lights, instruments and more, with a click of a button. Customization is a PAID feature; supported vehicles only. Service: With Carista’s DIY tools, resetting your oil service indicator, servicing your electronic parking brake or checking your launch control count becomes a 1-click action. This is a PAID feature; supported vehicles only. Pricing: All PAID features listed above are available with an in-app purchase of Pro functionality: complimentary 1 month trial included, annual subscriptions are $39.99/year.

Show More Show Less

OMP Corsica Steering Wheel - Dished 330mm, Black Suede

T#:391802

Part#: OD/2012

Ships in 4 Business Days

$ 275.00 USD

Add to Wish List

Qty

$ 275.00 USD

Add to Wish List

Classic 3-spoke OMP steering wheel in 330mm diameter and 95mm dish. Anodized aluminum center with OMP horn button and suede on the rim. The steering wheel rim has a round shape instead of exaggerated oval found on other racing wheels. A top-center band gives you a strong reference point for when the wheel is angled or back to center.

Show More Show Less

OMP Racing GP Racing Steering Wheel -- Black Polyurethane

T#:393744

Part#: OD/1981

Ships in 4 Business Days

$ 159.00 USD

Add to Wish List

Qty

$ 159.00 USD

Add to Wish List

Sporty 3-spoke OMP Racing GP steering wheel in 330mm diameter. Anodized aluminum center with OMP horn button and black leather-like polyurethane rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 330mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Show More Show Less

OMP Racing Seat Base Cushion | Black

T#:393789

Part#: HB/695

Ships in 4 Business Days

$ 85.00 USD

Add to Wish List

Qty

$ 85.00 USD

Add to Wish List

Racing seats can become uncomfortable as the thin padding of the seat begins to compress. If you're planning on sitting in the seat for any extended periods of time, a base cushion is the perfect addition. This OMP seat cushion is 1.5" of firm, but comfortable and supportive, foam that attaches to the velour seat fabric using Velcro strips. The seat cushion is covered in black velour fabric that is flame-retardant and has an OMP logo embroidered in the center. The cushion is 13" long and 11" wide.

Show More Show Less

OMP Steel low brackets - 16 holes | Black

T#:393734

Part#: HC/922

Ships in 5 Business Days

$ 129.00 USD

Add to Wish List

Qty

$ 129.00 USD

Add to Wish List

Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 16 different positions. Length: 400 mm Thickness: 3 mm

OMP Corsica Steering Wheel - 350mm | Black/Yellow Leather

T#:391779

Part#: OD/1956

Ships in 10 Business Days

$ 259.00 USD

Add to Wish List

Qty

$ 259.00 USD

Add to Wish List

Classic inspired 3-spoke OMP Corsica Leather steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Show More Show Less

OMP Alluminum tall brackets - 36 holes | Black

T#:393737

Part#: HC/925

Ships in 10 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 36 different positions. Length: 495 mm Thickness: 6 mm

OMP WRC Racing Steering Wheel - Mid-depth 350mm dished | Black suede ...

T#:393639

Part#: OD/1979/N

Ships on Aug 11, 2026

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Classic 3-spoke OMP WRC steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip.

Show More Show Less

OMP Seat Sliding bracket

T#:393727

Part#: HC/665

Ships on Aug 17, 2026

$ 99.00 USD

Add to Wish List

Qty

$ 99.00 USD

Add to Wish List

Sliding rail kit to be mounted between the seat mount and the seat.

OMP Battery Cut Off Switch / Kill Switch

T#:1614

Part#: EA-462

In Stock

$ 65.00 USD

Add to Wish List

Qty

$ 65.00 USD

Add to Wish List

OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.

Show More Show Less

OMP Rally Steering Wheel - 350mm | Black/Yellow Suede

T#:393622

Part#: OD/1951

In Stock

$ 259.00

This product was last offered at the strikethrough price on
05-03-2026

$ 233.99 USD

Limited Qty Sale

Add to Wish List

Qty

$ 259.00

This product was last offered at the strikethrough price on
05-03-2026

$ 233.99 USD

Limited Qty Sale

Add to Wish List

Rally inspired 2-spoke OMP Rally Suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have slight contours for resting your thumbs to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Show More Show Less

GSP Rear Axle Assembly - Right - E46, Z4

T#:389701

Part#: NCV27516

Ships in 2 Business Days

$ 183.99 USD

Add to Wish List

Qty

$ 183.99 USD

Add to Wish List

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

This item fits the following BMWs:

E46 BMW M3

E85 BMW Z4M

Show More Show Less

Z4 M HD Clutch and Flywheel Kit

T#:878

Part#: 520-010S-S873G

Ships in 9 Business Days

$ 1,488.61 USD

Add to Wish List

Qty

$ 1,488.61 USD

Add to Wish List

This lightweight aluminum flywheel w/ Heavy Duty "sprung-hub" clutch package is the best-engineered solution for E46 325 and 330 models with the 6-speed transmission, Z4 2.5/3.0, and Z4 M Roadster and M Coupe. Instead of picking a clutch from another car that may or may not work at all, the engineers at JB Racing have taken all of the guess work out of this upgrade and incorporated a Sachs sport sprung-hub clutch with the correct pressure plate and combined it with their most-popular aluminum lightweight flywheel. The Sachs HD clutch disc has a sprung hub to minimize noise and vibration and organic linings to give the feel and engagement of a stock clutch. Mixing and matching of the incorrect clutch, pressure plate, and flywheel components can lead to inconsistent engagement and feel -- why make your clutch feel worse?

In addition, the Sachs HD pressure plate will clamp with greater force -- allowing approximately 350 ft-lbs of torque, which makes it an obvious upgrade from the stock clutch kit. And with the aluminum flywheel weight savings is substantial over the stock dual-mass flywheel - which allows your motor to spool up faster and transmit more HP to the ground.

Because Sachs is an OE supplier to most German cars, replacement parts are just a phone call away. This kit uses the stock throw-out bearing (included in the price).

Z4 M Sport Clutch and Flywheel Applications:
2006-2008 E85 Z4, E86 Z4 Z4 M Roadster, Z4 M Coupe

Show More Show Less

GSP Rear Axle Assembly - Left - E46, Z4

T#:389714

Part#: NCV27500

Ships in 2 Business Days

$ 178.99 USD

Add to Wish List

Qty

$ 178.99 USD

Add to Wish List

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

This item fits the following BMWs:

E46 BMW M3

E85 BMW Z4M

Show More Show Less

OMP Velocita Steering Wheel - 380mm | Black/Yellow Suede

T#:393655

Part#: OD/1987/NN

Ships in 3 Business Days

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

Sport inspired 3-spoke OMP Velocita Suede steering wheel in 380mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center.

Show More Show Less

OMP Velocita Superleggero Steering Wheel - 350mm | Black/Yellow Suede...

T#:393666

Part#: OD/2020

Ships in 4 Business Days

$ 379.00 USD

Add to Wish List

Qty

$ 379.00 USD

Add to Wish List

Sport-inspired 3-spoke OMP Velocita Superleggero suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip.

Show More Show Less

Fixed Steering Wheel Spacer | 60mm | Black, silver

T#:393677

Part#: ODC023

Ships in 4 Business Days

$ 149.00 USD

Add to Wish List

Qty

$ 149.00 USD

Add to Wish List

Ultra-light spacer that has been CNC machined and anodized black. Gives 60mm of clearance for the steering wheel.

OMP Trecento Steering Wheel

T#:391799

Part#: OD-TRECENTO

Ships in 10 Business Days

Starting at $ 239.00 USD

Add to Wish List

Starting at $ 239.00 USD

Add to Wish List

Classic 3-spoke OMP steering wheel in 300mm diameter. Anodized aluminum center with OMP horn button and available in leather or suede.

OMP Trecento Racing Steering Wheel - 300mm | Black Suede

T#:391797

Part#: OD/1975

Ships in 10 Business Days

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

Classic 3-spoke OMP Trecento steering wheel in 300mm diameter. Anodized aluminum center with OMP horn button and black suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The bottom half of the rim is extra thick for more cushion and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 300mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Show More Show Less

OMP Superquadro Racing Steering Wheel - Flat 330mm, Black Suede ...

T#:391800

Part#: OD/1990

Ships in 6 Business Days

$ 279.00 USD

Add to Wish List

Qty

$ 279.00 USD

Add to Wish List

Universal sport steering wheel with a 330mm diameter.

OMP 320 Carbon S Steering Wheel - 320mm |Black/Yellow Suede

T#:393672

Part#: OD/2032

Ships in 10 Business Days

$ 999.00 USD

Add to Wish List

Qty

$ 999.00 USD

Add to Wish List

Sport inspired 3-spoke OMP 320 Carbon S suede steering wheel in 320mm diameter. Carbon Fiber center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 320mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. Total weight of the steering wheel is 460gr. A steering column hub adapter is required.

Show More Show Less

OMP 350 Carbon Steering Wheel - Dished 350mm | Black suede

T#:393670

Part#: OD/2028

Ships in 10 Business Days

$ 899.00 USD

Add to Wish List

Qty

$ 899.00 USD

Add to Wish List

Sport inspired 3-spoke OMP 350 Carbon suede steering wheel in 350mm diameter. Full carbon fiber center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. Total weight of the steering wheel is 500gr. A steering column hub adapter is required.

Show More Show Less

OMP Velocita 380 Steering Wheel - Flat 380mm | Black leather ...

T#:393671

Part#: OD/2030

Ships in 10 Business Days

$ 275.00 USD

Add to Wish List

Qty

$ 275.00 USD

Add to Wish List

Sport inspired 3-spoke OMP Velocita 380 leather steering wheel in 380mm diameter. Anodized aluminum center with OMP horn button and black leather rim. The steering wheel rim is slightly larger than other Veloctia models and is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 380mm size is average compared to most BMW wheels. A steering column hub adapter is required.

Show More Show Less

OMP Corsica 350mm Steering Wheel

T#:391804

Part#: OD-CORSICA

Ships in 10 Business Days

Starting at $ 259.00 USD

Add to Wish List

Starting at $ 259.00 USD

Add to Wish List

Classic 3-spoke OMP steering wheel in 350mm diameter and 95mm dish. Anodized aluminum center with OMP horn button and suede on the rim. The dish offset pushes the steering wheel towards the driver instead of flat against the hub. The steering wheel rim has a round shape instead of exaggerated oval found on other racing wheels. A top-center band gives you a strong reference point for when the wheel is angled or back to center.

Show More Show Less

OMP Corsica Steering Wheel - 350mm | Black/Yellow Suede

T#:391803

Part#: OD/1954

Ships in 10 Business Days

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

Classic inspired 3-spoke OMP Corsica Suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Show More Show Less

OMP Alluminum low brackets - 16 holes | Black

T#:393736

Part#: HC/924

Back Ordered

$ 179.00 USD

Add to Wish List

Qty

$ 179.00 USD

Add to Wish List

Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 16 different positions. Length: 400 mm Thickness: 6 mm

OMP Steel tall brackets | Black

T#:393729

Part#: HC/731E

Ships in 10 Business Days

$ 95.00 USD

Add to Wish List

Qty

$ 95.00 USD

Add to Wish List

Steel brackets for side mounted seats. High model. 400 mm lenght x 3 mm thick

Racing Steering Wheel Quick Release - 6 Holes - Weld On

T#:583126

Part#: ODS/024/W

Ships in 10 Business Days

$ 399.00 USD

Add to Wish List

Qty

$ 399.00 USD

Add to Wish List

This bolts between your factory OMP, Sparco, MOMO, Max Pappis, NRG six-bolt steering wheel hub adapter (sold separately), and bolt your six-bolt steering wheel.

OMP Racing Seat Leg Cushion | Black

T#:393788

Part#: HB/693

Ships in 10 Business Days

$ 85.00 USD

Add to Wish List

Qty

$ 85.00 USD

Add to Wish List

If additional leg support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Leg Cushion. Measuring in at 13" by 8.5" by 3.5", it is fastened to the velour fabric of the seat with Velcro strips. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.

Show More Show Less

OMP Racing Steering Wheel Quick Release - 6 Holes w/Electrical Connec...

T#:597124

Part#: ODS/024/BE

Ships in 10 Business Days

$ 599.00 USD

Add to Wish List

Qty

$ 599.00 USD

Add to Wish List

6-hole quick-release aluminum hub for bolting. Compatible with 3 or 6 hole steering wheels. The use of PTFE dry lubricating grease is recommended to preserve the components and guarantee the best performance. Includes 11-pin connector of the highest level. The connector is a very high performance component, with aluminum body and guide designed to allow a quick connection and perfect alignment of the 11 poles. IP68 certified, resistant to high temperatures and chemical components. 10,000 guaranteed cycles.

Show More Show Less

OMP Asso Racing Steering Wheel -- 350mm | Black Leather

T#:393749

Part#: OD/2019

Ships in 10 Business Days

$ 199.00 USD

Add to Wish List

Qty

$ 199.00 USD

Add to Wish List

Sporty 3-spoke OMP Asso steering wheel in 350mm diameter. Matte aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The 350mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Show More Show Less

OMP WRC Racing Steering Wheel - Mid-depth 350mm dished | Black Leathe...

T#:393640

Part#: OD/1980/N

Ships in 10 Business Days

$ 259.00 USD

Add to Wish List

Qty

$ 259.00 USD

Add to Wish List

Classic 3-spoke OMP WRC steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Show More Show Less

OMP Sand Racing Steering Wheel - 380mm | Black Polyurethane

T#:393764

Part#: OD/2031

Ships in 10 Business Days

$ 239.00 USD

Add to Wish List

Qty

$ 239.00 USD

Add to Wish List

Sporty 3-spoke OMP Sand steering wheel in 380mm diameter. Black anodized aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have slight contours for resting your thumbs to give you more leverage and grip. A steering column hub adapter is required.

Show More Show Less

OMP Cromo Racing Steering Wheel -- 350mm | Black Leather

T#:393745

Part#: OD/2018

Ships in 10 Business Days

$ 189.00 USD

Add to Wish List

Qty

$ 189.00 USD

Add to Wish List

Sporty 3-spoke OMP Cromo steering wheel in 350mm diameter. Chrome aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 350mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Show More Show Less

OMP RS-P.T. 2: Fiberglass Racing Seat | Black

T#:393714

Part#: HA/762E

Ships in 10 Business Days

$ 849.00 USD

Add to Wish List

Qty

$ 849.00 USD

Add to Wish List

This is an OMP performance RS-PT2 Fiberglass racing seat. The seat internal frame is fiberglass and the entire seat upholstery is velour material. Fiberglass gives strength and light weight and the velour adds to the comfort of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Show More Show Less

KMAC Stage 2 Street/Track Front Adjustable Camber/Caster Plates - E36...

T#:389647

Part#: 192416-2L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

KMAC Stage 3 Street/Track Front Adjustable Camber/Caster Plates - E36...

T#:389646

Part#: 192416-3L

Special Order: No Guaranteed ETA

$ 545.00 USD

Add to Wish List

Qty

$ 545.00 USD

Add to Wish List

Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i
6/1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2003 E39 BMW 525i 528i 530i 540i (not for cars with EDC)
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
2004-2011 E63 E64 BMW 645ci 650i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003 E52 BMW Z8 Roadster (without EDC)

Show More Show Less

OMP Targa Racing Steering Wheel - 330mm | Black/Yellow Suede ...

T#:391801

Part#: OD/2005

Ships in 10 Business Days

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

Classic 3-spoke OMP steering wheel in 330mm diameter. Anodized aluminum center with OMP horn button and black suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The bottom half of the rim is extra thick for more cushion and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center.

Show More Show Less

GSP Front Wheel bearing & hub assembly - E82, E88, E90, E91, E92, E93...

T#:389674

Part#: 274254

Ships in 2 Business Days

$ 184.99 USD

Add to Wish List

Qty

$ 184.99 USD

Add to Wish List

Since established in 2004, GSP North America has positioned itself as a leading supplier of New Axles in North America.GSP’s new axle program consistently offers the best application coverage, most SKU count, and more new numbers than any other competitors. GSP’s hub assembly program was introduced to North America market in 2010 and has grown into one the most trustable programs in US market.

This item fits the following BMWs:

2008+ E82 BMW 128i 135i 135is
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
2013+ E84 BMW X1 sDrive28i
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Show More Show Less

OMP Universal brackets | Silver

T#:393728

Part#: HC/666

Ships in 10 Business Days

$ 119.00 USD

Add to Wish List

Qty

$ 119.00 USD

Add to Wish List

Universal aluminium brackets for seats with side attachments for Renault R5 >72<84

OMP Trecento Racing Steering Wheel - 300mm | Black leather

T#:391798

Part#: OD/1976/N

Ships in 10 Business Days

$ 249.00 USD

Add to Wish List

Qty

$ 249.00 USD

Add to Wish List

Classic 3-spoke OMP Trecento steering wheel in 300mm diameter. Anodized aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The bottom half of the rim is extra thick for more cushion and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 300mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Show More Show Less

OMP Kubic Racing Steering Wheel - Flat 310mm | Black suede

T#:393641

Part#: OD/1985

Ships in 10 Business Days

$ 269.00 USD

Add to Wish List

Qty

$ 269.00 USD

Add to Wish List

Aggressive 3-spoke OMP Kubic steering wheel in 310mm diameter. Anodized aluminum center with OMP horn button and black suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The over-all shape of the steering wheel is square-like with rounded corners and a slightly more narrow top. The 310 x 265mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Show More Show Less

Project Cars

SELECT YOUR BMW

BMW Z Series E85/6 (2003-2008)

Sub-Categories

Select Vehicle

Purpose

Category

Brand

Price

Shipping

Narrow Results