BMW Z Series E85/6 (2003-2008)

Clear BMW chassis

Please ensure your correct model is selected

Sub-Categories

Sort By:

KMAC - Corporate Logo
T#:389645
Part#: 192416-1J
In Stock
$ 380.00 USD
Free Shipping
$ 380.00 USD
Free Shipping
Location: Front
Type: Street, Stage 1
Bearing: captive-ball fully encased in polyurethane

These front adjustable camber/caster plates will replace your stock front upper strut bearing. The KMAC plates are a 'floating' design so camber and caster are adjusted together. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. Since these replace your stock strut bearings they are designed to work with a stock-type spring only. And when installed correctly will not significantly alter ride height. Adjustment is easily done by loosening the three nuts on top of the tower and sliding the camber plate into the position you want, then re-tighten the nuts. These mounts can be installed two ways - for camber correction or swapped side-side for increasing negative camber. Detailed instructions included.

Note: suspensions vary from manufacturer to manufacturer. Turner Motorsport cannot be responsible for fitment issues caused by non-stock or specialized coil-over suspensions. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
OMP - Corporate Logo
T#:393626
Part#: OD/1958
In Stock
$ 269.00 USD
Free Shipping
$ 269.00 USD
Free Shipping
Sport-inspired 3-spoke OMP Velocita Suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less
OMP - Corporate Logo
T#:393667
Part#: OD/2023
Ships in 4 Business Days
$ 149.00 USD
Free Shipping
$ 149.00 USD
Free Shipping
Classic inspired 3-spoke OMP Mugello wood steering wheel in 350mm diameter. Gloss aluminum center with OMP wooden horn button. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have 3 holes each that increase in size as they get closer to the center of the steering wheel.
Show More Show Less

OMP - Corporate Logo
T#:393794
Part#: HB/699
Ships in 4 Business Days
$ 69.00 USD
Free Shipping
$ 69.00 USD
Free Shipping
This cushion designed specifically for the WRC and HRC racing seats is a simple addition that adds safety, comfort, and support. It attaches with just two straps to the top of the racing seat and is covered in the same velour fabric as the racing seat itself. A white OMP logo is embroidered in the top half of the cushion to match the design of the seat.
Show More Show Less

OMP - Corporate Logo
T#:393735
Part#: HC/923
Ships on Aug 24, 2026
$ 139.00 USD
Free Shipping
$ 139.00 USD
Free Shipping
Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 36 different positions. Length: 495 mm Thickness: 3 mm
OMP - Corporate Logo
T#:393730
Part#: HC/733E
Ships in 10 Business Days
$ 95.99 USD
Free Shipping
$ 95.99 USD
Free Shipping
Steel brackets for side mounted seats. Low model. 350 mm length x 3 mm thick.

Carista Bluetooth OBD2 Adapter - BMW & Mini
This application supports basic OBD2 diagnostics only
Carista - Corporate Logo
T#:391453
Part#: COBD-BT24
In Stock
$ 39.99 USD
Free Shipping
$ 39.99 USD
Free Shipping
Carista is a smartphone application for both iOS and Android devices that allows owners to diagnose vehicle faults, reset service indicators, and customize vehicle systems without any complicated coding. In order to use Carista on your vehicle, only three things are required: An iPhone, iPad, or iPod touch running iOS 8.0 or later OR an Android device running Android 2.3 and up The Carista OBD2 App: Available on the Apple AppStore and Google Play Bluetooth OBD2 Adapter: Available HERE! Uses Bluetooth 4LE which prevents drainage to the car's battery due to it's power saving mode. Since the adapter is Bluetooth, the Wi-Fi connection on your mobile device remains open so you can still browse the internet while still remaining connected to the vehicle. The Carista Bluetooth OBD2 Adapter is also compatible with the OBD Fusion app on iOS and Android. Diagnose (OBD2): Carista can check your vehicle's health and report any faults stored in its computers. You can also clear any fault codes and reset your "check engine" light, as emissions test readiness. This is a FREE feature. Diagnose (Manufacturer-Specific): Unlike regular OBD2 apps, Carista also gives you access to advanced manufacturer-specific diagnostics, including computers like ABS, airbag, navigation, etc. and gives you the ability to reset your airbag light, ABS light, traction control light, etc. Manufacturer-Specific Diagnosis is a PAID feature; supported vehicles only. Customization: Carista gives you the power to personalize the behavior of your car’s windows, lights, instruments and more, with a click of a button. Customization is a PAID feature; supported vehicles only. Service: With Carista’s DIY tools, resetting your oil service indicator, servicing your electronic parking brake or checking your launch control count becomes a 1-click action. This is a PAID feature; supported vehicles only. Pricing: All PAID features listed above are available with an in-app purchase of Pro functionality: complimentary 1 month trial included, annual subscriptions are $39.99/year.
Show More Show Less
OMP - Corporate Logo
T#:391802
Part#: OD/2012
Ships in 4 Business Days
$ 275.00 USD
Free Shipping
$ 275.00 USD
Free Shipping
Classic 3-spoke OMP steering wheel in 330mm diameter and 95mm dish. Anodized aluminum center with OMP horn button and suede on the rim. The steering wheel rim has a round shape instead of exaggerated oval found on other racing wheels. A top-center band gives you a strong reference point for when the wheel is angled or back to center.
Show More Show Less

OMP - Corporate Logo
T#:393744
Part#: OD/1981
Ships in 4 Business Days
$ 159.00 USD
Free Shipping
$ 159.00 USD
Free Shipping

Sporty 3-spoke OMP Racing GP steering wheel in 330mm diameter. Anodized aluminum center with OMP horn button and black leather-like polyurethane rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 330mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Show More Show Less

OMP - Corporate Logo
T#:393789
Part#: HB/695
Ships in 4 Business Days
$ 85.00 USD
Free Shipping
$ 85.00 USD
Free Shipping
Racing seats can become uncomfortable as the thin padding of the seat begins to compress. If you're planning on sitting in the seat for any extended periods of time, a base cushion is the perfect addition. This OMP seat cushion is 1.5" of firm, but comfortable and supportive, foam that attaches to the velour seat fabric using Velcro strips. The seat cushion is covered in black velour fabric that is flame-retardant and has an OMP logo embroidered in the center. The cushion is 13" long and 11" wide.
Show More Show Less
OMP - Corporate Logo
T#:393734
Part#: HC/922
Ships in 5 Business Days
$ 129.00 USD
Free Shipping
$ 129.00 USD
Free Shipping
Multi hole steel seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 16 different positions. Length: 400 mm Thickness: 3 mm
OMP - Corporate Logo
T#:391779
Part#: OD/1956
Ships in 10 Business Days
$ 259.00 USD
Free Shipping
$ 259.00 USD
Free Shipping
Classic inspired 3-spoke OMP Corsica Leather steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less


OMP - Corporate Logo
T#:393737
Part#: HC/925
Ships in 10 Business Days
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 36 different positions. Length: 495 mm Thickness: 6 mm
OMP - Corporate Logo
T#:393639
Part#: OD/1979/N
Ships on Aug 11, 2026
$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping
Classic 3-spoke OMP WRC steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip.
Show More Show Less
OMP - Corporate Logo
T#:393727
Part#: HC/665
Ships on Aug 17, 2026
$ 99.00 USD
Free Shipping
$ 99.00 USD
Free Shipping
Sliding rail kit to be mounted between the seat mount and the seat.

OMP - Corporate Logo
T#:1614
Part#: EA-462
In Stock
$ 65.00 USD
Free Shipping
$ 65.00 USD
Free Shipping
OMP Battery Cut Off Switch / Kill Switch, for use in racecars as an emergency "kill switch", to depower the electrical system in the event of a crash or other emergency. This cut off switch is FIA approved, has 6 poles and alternator protection, as well as a removable key.
Show More Show Less

OMP - Corporate Logo
T#:393622
Part#: OD/1951
In Stock
$ 259.00

This product was last offered at the strikethrough price on
05-03-2026

$ 233.99 USD
Limited Qty Sale
Free Shipping
$ 259.00

This product was last offered at the strikethrough price on
05-03-2026

$ 233.99 USD
Limited Qty Sale
Free Shipping
Rally inspired 2-spoke OMP Rally Suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have slight contours for resting your thumbs to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less
Autel - Corporate Logo
T#:3529121
Part#: AUL1SENSORKT
In Stock
$ 243.99 USD
Free Shipping
$ 243.99 USD
Free Shipping

OMP - Corporate Logo
T#:393655
Part#: OD/1987/NN
Ships in 3 Business Days
$ 269.00 USD
Free Shipping
$ 269.00 USD
Free Shipping
Sport inspired 3-spoke OMP Velocita Suede steering wheel in 380mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center.
Show More Show Less
OMP - Corporate Logo
T#:393666
Part#: OD/2020
Ships in 4 Business Days
$ 379.00 USD
Free Shipping
$ 379.00 USD
Free Shipping
Sport-inspired 3-spoke OMP Velocita Superleggero suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip.
Show More Show Less

OMP - Corporate Logo
T#:393677
Part#: ODC023
Ships in 4 Business Days
$ 149.00 USD
Free Shipping
$ 149.00 USD
Free Shipping
Ultra-light spacer that has been CNC machined and anodized black. Gives 60mm of clearance for the steering wheel.

OMP - Corporate Logo
T#:391799
Part#: OD-TRECENTO
Ships in 10 Business Days
Starting at $ 239.00 USD
Free Shipping
Starting at $ 239.00 USD
Free Shipping
Classic 3-spoke OMP steering wheel in 300mm diameter. Anodized aluminum center with OMP horn button and available in leather or suede.
OMP - Corporate Logo
T#:391797
Part#: OD/1975
Ships in 10 Business Days
$ 239.00 USD
Free Shipping
$ 239.00 USD
Free Shipping
Classic 3-spoke OMP Trecento steering wheel in 300mm diameter. Anodized aluminum center with OMP horn button and black suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The bottom half of the rim is extra thick for more cushion and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 300mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less
OMP - Corporate Logo
T#:391800
Part#: OD/1990
Ships in 6 Business Days
$ 279.00 USD
Free Shipping
$ 279.00 USD
Free Shipping
Universal sport steering wheel with a 330mm diameter.


OMP - Corporate Logo
T#:393672
Part#: OD/2032
Ships in 10 Business Days
$ 999.00 USD
Free Shipping
$ 999.00 USD
Free Shipping
Sport inspired 3-spoke OMP 320 Carbon S suede steering wheel in 320mm diameter. Carbon Fiber center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 320mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. Total weight of the steering wheel is 460gr. A steering column hub adapter is required.
Show More Show Less
OMP - Corporate Logo
T#:393670
Part#: OD/2028
Ships in 10 Business Days
$ 899.00 USD
Free Shipping
$ 899.00 USD
Free Shipping
Sport inspired 3-spoke OMP 350 Carbon suede steering wheel in 350mm diameter. Full carbon fiber center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. Total weight of the steering wheel is 500gr. A steering column hub adapter is required.
Show More Show Less
OMP - Corporate Logo
T#:393671
Part#: OD/2030
Ships in 10 Business Days
$ 275.00 USD
Free Shipping
$ 275.00 USD
Free Shipping
Sport inspired 3-spoke OMP Velocita 380 leather steering wheel in 380mm diameter. Anodized aluminum center with OMP horn button and black leather rim. The steering wheel rim is slightly larger than other Veloctia models and is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 380mm size is average compared to most BMW wheels. A steering column hub adapter is required.
Show More Show Less

OMP - Corporate Logo
T#:391804
Part#: OD-CORSICA
Ships in 10 Business Days
Starting at $ 259.00 USD
Free Shipping
Starting at $ 259.00 USD
Free Shipping
Classic 3-spoke OMP steering wheel in 350mm diameter and 95mm dish. Anodized aluminum center with OMP horn button and suede on the rim. The dish offset pushes the steering wheel towards the driver instead of flat against the hub. The steering wheel rim has a round shape instead of exaggerated oval found on other racing wheels. A top-center band gives you a strong reference point for when the wheel is angled or back to center.
Show More Show Less

OMP - Corporate Logo
T#:391803
Part#: OD/1954
Ships in 10 Business Days
$ 269.00 USD
Free Shipping
$ 269.00 USD
Free Shipping
Classic inspired 3-spoke OMP Corsica Suede steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black Suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have angled contours to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less
OMP - Corporate Logo
T#:393736
Part#: HC/924
Back Ordered
$ 179.00 USD
Free Shipping
$ 179.00 USD
Free Shipping
Multi hole aluminium seat bracket in compliance with FIA Appendix J art. 253. Updated design, minimum 16 different positions. Length: 400 mm Thickness: 6 mm

OMP - Corporate Logo
T#:393729
Part#: HC/731E
Ships in 10 Business Days
$ 95.00 USD
Free Shipping
$ 95.00 USD
Free Shipping
Steel brackets for side mounted seats. High model. 400 mm lenght x 3 mm thick
OMP - Corporate Logo
T#:583126
Part#: ODS/024/W
Ships in 10 Business Days
$ 399.00 USD
Free Shipping
$ 399.00 USD
Free Shipping
This bolts between your factory OMP, Sparco, MOMO, Max Pappis, NRG six-bolt steering wheel hub adapter (sold separately), and bolt your six-bolt steering wheel.

OMP - Corporate Logo
T#:393788
Part#: HB/693
Ships in 10 Business Days
$ 85.00 USD
Free Shipping
$ 85.00 USD
Free Shipping
If additional leg support is needed for those extra long days in the racing seat, OMP offers the Racing Seat Leg Cushion. Measuring in at 13" by 8.5" by 3.5", it is fastened to the velour fabric of the seat with Velcro strips. The pad itself is covered with the same velour flame-retardant material as the seat and is embroidered with an OMP logo.
Show More Show Less

OMP - Corporate Logo
T#:597124
Part#: ODS/024/BE
Ships in 10 Business Days
$ 599.00 USD
Free Shipping
$ 599.00 USD
Free Shipping
6-hole quick-release aluminum hub for bolting. Compatible with 3 or 6 hole steering wheels. The use of PTFE dry lubricating grease is recommended to preserve the components and guarantee the best performance. Includes 11-pin connector of the highest level. The connector is a very high performance component, with aluminum body and guide designed to allow a quick connection and perfect alignment of the 11 poles. IP68 certified, resistant to high temperatures and chemical components. 10,000 guaranteed cycles.
Show More Show Less
OMP - Corporate Logo
T#:393749
Part#: OD/2019
Ships in 10 Business Days
$ 199.00 USD
Free Shipping
$ 199.00 USD
Free Shipping
Sporty 3-spoke OMP Asso steering wheel in 350mm diameter. Matte aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The 350mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less
OMP - Corporate Logo
T#:393640
Part#: OD/1980/N
Ships in 10 Business Days
$ 259.00 USD
Free Shipping
$ 259.00 USD
Free Shipping
Classic 3-spoke OMP WRC steering wheel in 350mm diameter. Anodized aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 350mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less


OMP - Corporate Logo
T#:393764
Part#: OD/2031
Ships in 10 Business Days
$ 239.00 USD
Free Shipping
$ 239.00 USD
Free Shipping
Sporty 3-spoke OMP Sand steering wheel in 380mm diameter. Black anodized aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have slight contours for resting your thumbs to give you more leverage and grip. A steering column hub adapter is required.
Show More Show Less
OMP - Corporate Logo
T#:393745
Part#: OD/2018
Ships in 10 Business Days
$ 189.00 USD
Free Shipping
$ 189.00 USD
Free Shipping

Sporty 3-spoke OMP Cromo steering wheel in 350mm diameter. Chrome aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The grip itself is textured at the 9 and 3 positions for extra control of the steering wheel. The 350mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Show More Show Less
OMP - Corporate Logo
T#:393714
Part#: HA/762E
Ships in 10 Business Days
$ 849.00 USD
Free Shipping
$ 849.00 USD
Free Shipping

This is an OMP performance RS-PT2 Fiberglass racing seat. The seat internal frame is fiberglass and the entire seat upholstery is velour material. Fiberglass gives strength and light weight and the velour adds to the comfort of the seat. The main backrest pads and leg pad are both exchangeable with different sized pads for a more custom fit. The large shoulder harness slots allow for a variety of driver heights.

Today OMP Racing is one of the world's leading manufacturers of racing safety equipment and tuning accessories with a catalog of over 3,000 different items. Operating from a technologically advanced 80,000 sqft facility in Italy, OMP products are renowned for its quality, the meticulous attention to details that is constantly challenged by setting higher standards.

Show More Show Less

KMAC - Corporate Logo
T#:389647
Part#: 192416-2L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 2 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less

KMAC - Corporate Logo
T#:389646
Part#: 192416-3L
Special Order: No Guaranteed ETA
$ 545.00 USD
Free Shipping
$ 545.00 USD
Free Shipping
Location: Front
Type: Street/Track, Stage 2
Bearings: main PTFE-lined pillow-ball bearing suspended in polyurethane; self-lubricating radial axial bearing/bushing in upper spring plate
Springs: includes OEM size upper spring perch, 60mm upper spring perch, and 2.5" upper spring perch

The Stage 3 KMAC plates are a mixed track and street camber/caster plate meant to be used in a variety of suspensions and setups. Since there is less bushing than on the Stage 1, more noise and vibration will reach the driver. The adjustment design is similar to the Stage 1 with a floating mount that sets camber and caster simultaneously. This design allows maximum range of adjustment since no other hardware interferes with the adjustments. These plates can work on both coil over and stock-stype suspensions and upper spring perches are included for OEM springs, 60mm, and 2.5" coil over springs. The upper perch assembly incorporate a self-sliding radial bushing that allows the spring to spin during its travel instead of bind. This reduces tension on the spring and helps reduce noise and spring 'popping' noises. Bearing inserts, spacers for correct articulating angles, and 3 sizes of upper nut adapters included. The urethane bushings and bearings are replaceable if they wear out. These are designed mainly for adding negative camber for improved handling and not for camber correction back to stock settings (see Stage 1 kit). Basic instructions included but professional installation is required.

Note: suspensions vary from manufacturer to manufacturer. The proper stacked height and clearances are required. K-Mac includes bearing adapters, spacers, and various top nuts but it is still the responsibility of the installer to ensure a correct and safe fitment. As with any race-derived component, additonal fabrication may be required.

This item fits the following BMWs:
2008-2012  E82 BMW  128i 135i
6/1992-1999  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005  E46 BMW  323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
2006-2012  E91 BMW  328i - Wagon
2007-2013  E92 BMW  328i 335i 335is - Coupe
2007-2013  E93 BMW  328i 335i - Convertible
1997-2003  E39 BMW  525i 528i 530i 540i (not for cars with EDC)
2004-2010  E60 BMW  525i 530i 528i 535i 545i 550i
2004-2011  E63 E64 BMW  645ci 650i
1997-2002  Z3 BMW  Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008  E85 BMW  Z4 2.5i Z4 3.0i Z4 3.0si
2009+  Z4 BMW  Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2000-2003  E52 BMW  Z8 Roadster (without EDC)
Show More Show Less
OMP - Corporate Logo
T#:391801
Part#: OD/2005
Ships in 10 Business Days
$ 269.00 USD
Free Shipping
$ 269.00 USD
Free Shipping
Classic 3-spoke OMP steering wheel in 330mm diameter. Anodized aluminum center with OMP horn button and black suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The bottom half of the rim is extra thick for more cushion and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center.
Show More Show Less

Autel - Corporate Logo
T#:5663676
Part#: AULTS508K1
Ships in 6 Business Days
$ 739.99 USD
Free Shipping
$ 739.99 USD
Free Shipping
Pinpoint and replace bad TPMS Sensors
Autel - Corporate Logo
T#:2914145
Part#: BT506
Ships in 6 Business Days
$ 402.99 USD
Free Shipping
$ 402.99 USD
Free Shipping
The BT506 is a battery and electrical system analysis tool that use as Adaptive Conductance an advanced battery analysis method, to produce a more accurate examination of the battery’s cold cranking ability and reserve capacity, vital to determining a b
Show More Show Less

OMP - Corporate Logo
T#:393728
Part#: HC/666
Ships in 10 Business Days
$ 119.00 USD
Free Shipping
$ 119.00 USD
Free Shipping
Universal aluminium brackets for seats with side attachments for Renault R5 >72<84

OMP - Corporate Logo
T#:391798
Part#: OD/1976/N
Ships in 10 Business Days
$ 249.00 USD
Free Shipping
$ 249.00 USD
Free Shipping
Classic 3-spoke OMP Trecento steering wheel in 300mm diameter. Anodized aluminum center with OMP horn button and black leather rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. The bottom half of the rim is extra thick for more cushion and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The 300mm size is on the small size compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less
OMP - Corporate Logo
T#:393641
Part#: OD/1985
Ships in 10 Business Days
$ 269.00 USD
Free Shipping
$ 269.00 USD
Free Shipping
Aggressive 3-spoke OMP Kubic steering wheel in 310mm diameter. Anodized aluminum center with OMP horn button and black suede rim. The steering wheel rim is oval shaped so your fingers wrap around the rim for improved grip. The spokes have contours for resting your thumbs to give you more leverage and grip. A bright yellow top-center band gives you a strong reference point for when the wheel is angled or back to center. The over-all shape of the steering wheel is square-like with rounded corners and a slightly more narrow top. The 310 x 265mm size is a bit smaller compared to most BMW wheels (stock is usually around 380mm) and may block gauges or instruments, depending on steering column adjustment. A steering column hub adapter is required.
Show More Show Less